Kullanılmış Müller-Mitteltal T3 Tiefl., Luft., Schwarzdeckentransporte satın al (3.408)

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7 Klsdpel Tik Njfx Aliet

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard on-board system for load weight determination * Warning panel packages at front & rear * Reflective contour marking tape on sides and rear * Removable rear rotating beacon * LED lights Kodsl Tphrspfx Alijlt * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, mounted on the right side * Front: closed single fender in plastic * Rear: straight steel mudguards with spray suppression (spray mist reduction) * Side underrun protection * Extension of the bogie platform at the front by 520 mm with 45° corners and 3 integrated storage compartments including lids, lockable * Chassis made of high-strength fine-grained steel * Floor above bogie platform: 50 mm softwood; deep bed platform: 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (no stakes present), each with 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform * At the side, front and rear: 2 pairs each of 13.4 t lashing rings on the outer frame; also, 4 pairs per side of 10 t lashing rings, swivel and lowerable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings at the excavator arm rest * 8 pairs of galvanized fold-out outriggers for 3-meter total width (not in the rear slope) * Widening planks for the left side stored in a compartment * Excavator arm rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm * Mechanical rear supports * Hydraulic folding ramps with hydraulically adjustable tip section approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting & load-holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (loaded): approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, access ramps, fold-out outriggers and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tank and slewing ring painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, includes manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf, A7

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways Kledpfxol Th Nnj Alist * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer Ref. for inquiries: 27963, available end of March 2026 NEW VEHICLE including COC * GVW: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports * Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm Kedpfxsyuq R Uj Alielt * Platform height approx. 910 mm loaded / approx. 940 mm unloaded * Load area: 7,000 mm with 400 mm high front wall * Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating, * Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation * Load securing package (La-Si-Paket): * 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members * 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame * 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN * Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Softwood (spruce/fir) floor, 50 mm thick * Gigant axles with air suspension including EBS 2S/2M * Lifting and lowering function * 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors * 1 plastic toolbox positioned in driving direction right, in front of the front wall * LED lighting system * 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize load warning sign * 1 removable all-round LED beacon including holder and installation * Rear folding supports, front support foot with gear winch ---- Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value Other terms with/without down payment or residual value are possible! We are an authorized MüllerMitteltal dealer ---- * Our opening hours: * Mon-Thu: 08:00-17:00 * Fri: 08:00-15:00 * Outside these hours, we are available by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Koşul: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS Ksdpfeyncyhsx Alielt * 5 odacıklı arka stop lambaları * Yüksekliği ayarlanabilir çekici tertibatı * Gigant akslar * Ön destek makarası ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Koşul: ikinci el, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540 STRAIGHT LOAD BED Container Locking System Unladen Weight: 8,000 kg German Inspection (HU): Due Gigant Axles with Drum Brakes Air Suspension Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4 Extendable to 3,000 mm with Lighting Drawbar – 50 mm Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm Support System Tyres: 235/75 R 17.5 Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract. Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply. Kledpjtuhv Rjfx Alijt

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML Klodpfx Asykx I Helijt ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame Kjdpfeykx I Tox Alislt * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear Ksdpfx Aletplwisielt * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer's warranty * Subject to errors and prior sale Kjdpfxjxptn Re Alielt * Available from approx. calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount Ksdpfx Aex Nlkaelielt * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Ksdpfjqpgtmox Alielt Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: ikinci el, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, Müller-Mitteltal alçak şasi damperli römork - Bir araçta hem alçak şasi hem de iki yandan damperli römork - 40 mm çeki halkası - Basınçlı hava fren sistemi - Yükleme ve boşaltma için destek ayakları - Gigant akslar - Lastik ölçüleri: 235/75 R 17,5 - Tambur fren - Boş ağırlık: 3.620 kg - Yükseklik ayarlı çekme kolu Kedoyk Rfkjpfx Alielt - Muayene son tarihi: 08.2026 - SP son tarihi: 02.2026 - SP son tarihi: - Yükleme alanı uzunluğu: 4.800 mm - Yükleme alanı genişliği: 2.430 mm - Yan tavan yüksekliği: 0,5 m Hatalar ve ara satış ihtimali saklıdır. Dahili araç numarası: 11349.

Koşul: ikinci el, boş ağırlık: 5.100 kg, azami yük ağırlığı: 12.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/1998, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 1.600 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, dingil mesafesi: 5.400 mm, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side impact protection, twin tyres, storage box, removable side walls. Wheelbase: 5,400 mm. Body: Trailer for roll-off containers in lengths 6 m to 6.75 m, SAF axles type SKRZ 11030, pneumatic hook low-tension device, 2 x mounting pockets for plug-in locking hooks, 4 x pockets for plug-in container centring and container stops. The trailer can also be used as a flatbed! Aluminium side walls with a height of 600 mm are included with the trailer! Klodpfx Aei Rpxwelist Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to modifications, prior sale and errors!

Koşul: ikinci el, boş ağırlık: 6.250 kg, azami yük ağırlığı: 23.750 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, yükleme alanı uzunluğu: 8.300 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 930 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 3 axles, turntable steering, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, mechanical ramps, rear support legs, side aluminium underrun protection, twin tyres, storage box. Structure: 3-axle low loader trailer with mechanical loading ramps, 3x 10t Gigant axles, drum brakes, extendable to 3m width! Kodpfxsxvzq Ho Alijlt Ramp length approx. 2900mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block Kjdpfol Tlhrox Aliolt * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector Kljdpel Tnu Aofx Aliet * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf Kodpfxol Th Nre Alielt

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm Kodpfol Th Ncox Alislt ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: Kjdpfjl Tilxjx Alijlt * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.770 kg, Üretim yılı: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Numerous Extras Equipment: - 2 spring-assisted lifts for 400mm high steel drop sides - Reinforced and certified superstructure in accordance with EN 12642 XL load securing certification - 10 UVV lashing rings in pre-existing lashing point grid in the outer frame - Additional wooden flooring in clamped design - Tyres 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm to a total length of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with a load capacity of 45 kg Kodpfxoxcxmfe Alielt Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stakes/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or dispatch available upon request. We always have a selection of new units in stock as well as demo units. Contact us! We rent vehicles and machinery with or without drivers. A wide range of used machines and devices always available. Technical changes, errors, and prior sale reserved.

Koşul: ikinci el, azami yük ağırlığı: 7.950 kg, toplam ağırlık: 11.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2010, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.000 kg Boş ağırlık: 3.050 kg Yük kapasitesi: 7.950 kg Toplam uzunluk: 8.100 mm Yükleme uzunluğu: toplam yaklaşık 6.000 mm Genişlik: 2.550 mm / yükleme genişliği yaklaşık 2.470 mm Klodex E I Utjpfx Alijt Yükleme yüksekliği: 900 mm Diğer bilgiler - Yüksekliği ayarlanabilir çekiş kolu - Destek ayağı - 400 mm yan duvarlar, yaylı - E-tekerlek - BPW akslar - Yaylı rampa, ızgara tipi, yandan kaydırılabilir - Tırmanma çıtaları, arka destek - Büyük bağlama paketi

Koşul: ikinci el, azami yük ağırlığı: 10.100 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2001, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 13.500 kg Boş ağırlık: 3.400 kg Yük kapasitesi: 10.100 kg Toplam uzunluk: 8.100 mm Yükleme uzunluğu: 6.000 mm Genişlik: Toplam genişlik 2.550 mm / Kasaboyu genişlik 2.460 mm Kedpfx Alsw Nu I Teijlt Yükleme yüksekliği: yaklaşık 1.000 mm Diğer bilgiler: - Lastik ebadı 285/70R19,5 - Yan paneller 400 mm, 1x bölmeli

Koşul: ikinci el, boş ağırlık: 8.680 kg, azami yük ağırlığı: 31.320 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2018, süspansiyon: diğer, lastik boyutu: 235/75R17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5, arka lastik boyutu: 235/75R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Kasnak halkaları, ABS, uyarı levhalı genişletme, araç talep üzerine satılmaktadır., -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: ! Kedpoy T E Hiofx Aliolt

Koşul: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm. -- Subject to misprints, errors, and changes. Sample images -- For more details, see: ! Ksdpoy Rr E Tsfx Aliolt