Kullanılmış Faymonville Combi-Z-10 M2+M2+M6 14.5 Meter Extandable! satın al (22.833)

Koşul: ikinci el, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the equipment list. Complete specification upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading bed * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyre size 205/65 R 17.5, twin-mounted Axles: * BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function * The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually Brake system: * Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 Pure White * Rims in silver Electrical system: * Electrical system according to EU regulations Lighting: Kdjdpfjx Uvlrjx Ap Eol * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: * 2-inch kingpin * Galvanised steel front wall approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings mounted on the galvanised connection rail at the front * 4 wheel chocks with holders on the front wall * Mountings at the rear of the gooseneck for aluminium loading ramps * Galvanised folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape as per EU regulations at sides, extension, and rear * Mounts for warning plates, left and right on the gooseneck and rear panel, including socket * Mudflap at the rear of the trailer * Manual and documentation on USB stick * European reflective plates (Red-Yellow) at the rear * 80 km/h speed stickers at the rear and both sides * Audible reverse warning signal * Load pressure gauge for axle load determination, including load chart

Koşul: yeni, * IMMEDIATE AVAILABILITY * Including lowerable loading platform / high tarpaulin 210cm / manual hydraulics / braked Technical specifications: • Type: New vehicle • Inspection (TÜV): New / 2 years • Availability: IMMEDIATE! • Permissible gross weight: 2,700kg • Unladen weight: approx. 655 kg • Payload: approx. 2,045 kg • Internal dimensions: 345 x 162 x 210 cm (L x W x H) Kdjdpfx Apoyalx De Ejl • Total external dimensions: 500 x 228 x 275 cm (L x W x H) • Loading edge height: approx. 48 cm • Tire specification: 195/50R13C steel rim • Brake: yes • Jockey wheel: yes, 45mm with clamp • 100km/h approval: at extra cost • Including vehicle documents Bodywork: • Floor: Multiplex timber floor • Side walls: anodised aluminium, 3-sided • Side wall height: 10cm • Chassis: Low-loader, lowerable, AL-KO rubber suspension axle • Tipping function: lowerable • Hydraulics: manual pump • Ramp angle: approx. 6° • Wheel chocks: not included • Overrun device & brake: AL-KO • Frame/chassis: welded steel frame, hot-dip galvanised • Lashing points: 10 recessed side anchors • Winch: available at extra cost • Supports: rear support • Ramps: with drive-over tip at rear • Lighting connector: 13-pin • Registration: COC documents Standard Equipment: • Multiplex timber floor - extremely robust • Fixed side walls 10mm • Corner sleeves at all corners, e.g. for tarpaulin framework • Very stable welded steel frame • Frame completely hot-dip galvanised • Multiple robust cross-members enable high point load capacity • Loading platform hydraulically lowerable • Mechanical safety lock for the pivot axle during travel • With drive-over tip at rear • Additional continuous longitudinal beams welded in • Front storage box • 10 lashing points inside the loading platform • Number plate holder at rear can be swung away for loading • AL-KO overrun device and parking brake • AL-KO coupling head • Reinforced heavy-duty V-drawbar • Automatic reverse system • 13-pin connector • Reversing lights • Large safety light units • Integrated rear fog light • Rear frame lighting recessed • Jockey wheel centrally mounted with clamp • Registration documents: COC papers Special equipment included in price: • Original Vezeko tarpaulin and frame, 210 cm high - Colour: black • Installation of tarpaulin system Optional accessories – please inquire: • 100km/h approval with shock absorbers • Anti-theft device • Spare wheel • High tarpaulin • Additional lashing points • Reversing lights • Tie-down straps • And much more New vehicle with warranty and TÜV ——— - Financing or leasing available - Nationwide delivery available - All prices include VAT - Advance dispatch of vehicle registration document possible or temporary registration plates (Germany) can be provided - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available on site! We have been authorised dealers and service partners for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions, and prior sale -

Koşul: ikinci el, azami yük ağırlığı: 36.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2021, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Extract from Equipment Specifications Loading Platform: • Telescopic loading platform with pneumatically operated locking mechanism. • 2 pairs of recessed lashing rings (LC 5,000 daN). • 1 pair of lashing rings in the gooseneck area (LC 10,000 daN). • 6 pairs of fold-out outer lashing rings (LC 5,000 daN). • 3 pairs of fold-out outer lashing rings (LC 10,000 daN). • Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN). Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: • Tyres 245/70 R 17.5 – brand of our choice. • Load index (146/146F). Axles: • BPW axles with hydro-mechanical forced steering. • Air suspension with lift and lower valve. • Axle tools. Brake System: • Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: • Steel structure made from high-strength fine-grained steel. • Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa). Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame through a 2-component (2C) zinc dust primer. • High-quality single-colour 2-component (2C) topcoat in RAL 3002 Carmine Red. • Rear section metallised and painted RAL 9010 (Pure White). • Rims silver. • Metallic paint not possible. Electrical System: • Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3). • ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. • Connections as per ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Warning Panels: • Brackets for warning panels with socket on both the gooseneck and the rear plate, left and right. Including the following additional equipment: - Rear axle steering from the front and rear via cable remote control with pushbuttons, axle tracking control included (without installation in the tractor unit). - Electro-hydraulic unit (± 45kg). - 4 wheel chocks with holder on the front wall (± 5kg). - 2-inch king pin. - Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35kg). - Yellow-red air couplings on the galvanized front connection bar. Kdsdpfx Apex Epzne Ejl - Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer. - European reflective plates (red-yellow) on the rear of the trailer. - One mud flap at the rear of the trailer. - Operating manual and description on USB stick. - Bracket for a beacon light at the rear of the trailer. - Heavy-duty hardwood flooring on the loading platform. - 9 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform (± 27kg). - Galvanized extensible side extensions of approx. 230 mm per side (± 230kg). - Spiral cable for the supply of the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO). - Galvanized supports under the sloped section of the loading platform. - Central beam with sand-coated paint finish for anti-slip protection. - 6 pairs of WADER container pockets in the loading platform for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90kg). - 4 pairs of transverse stake pocket strips mounted on the loading platform for plug-in stakes approx. 100 x 50 mm (± 145

Koşul: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Selection of features. Full specification available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and removable, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6 x 4 or 8 x 4 2-axle tractor units Compact front running gear: * Hook receivers front and rear, length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Main beam height: approx. 400 mm * Main beam width: approx. 1,350 mm * Loading height approx. 550 mm, ground clearance approx. 150 mm 4-axle rear running gear: * Mechanical bolt-eye coupling for attaching a lowbed at the front * Rear end crossmember chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front running gear: * 8 x (manufacturer’s choice, M+S) 285/70 R19.5 * Tyres rear running gear: * 16 x (manufacturer’s choice, M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted by turbine system after welding. Second blasting treatment with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL Including the following accessories * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls on the gooseneck, approx. 400 mm high, anodized * 3.5-inch king pin * Truck hydraulic connection with flow control valve (20 l/min) * Gallows for suspending supply lines, the tractor tank must be at least 80 l * with MAX Trailer coupling pieces, otherwise quick couplings to be supplied ex works by customer * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front running gear with separate air fitting for pneumatic screwdriver * BEKA-MAX central lubrication for one 2-axle running gear with standard grease NLGI-2 * One 7-pin socket each left and right on the rear of the front running gear for warning panels Kjdpfx Apexbmpls Esdl * Threaded insert option (Ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw rings (LC 16,000 daN) * Folding extensions with steel covers, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle running gear with standard grease NLGI-2 * At the rear running gear, one socket for the cable remote control of the steering * Rear running gear with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine * Operation of the steering, in addition to th

Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) Kodpfew Tpq Dox Ap Esdl - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Koşul: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt of the equipment. Complete equipment list available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden planks * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring. Axle: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake system: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 Volt LED lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Kdjdpfx Apsw Tpr Ij Esl Painting: * Complete steel construction automatically blast-cleaned by shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Coating structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included) * Electro-hydraulic unit * 4 wheel chocks with holders at the front wall * 2 inch king pin * At the galvanized connection rail in front, yellow-red air couplings * Mountings for warning boards left and right on neck and rear, including socket * 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside * Climbing ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l

Koşul: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear Kodpjxf Silefx Ap Eedl - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Kdedpfsw Tprzsx Ap Eel Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh

Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Kdjdpfx Asv Etx Eop Ejl Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Koşul: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) Kjdou Sd U Uopfx Ap Ejdl * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering Ksdpfx Aew Tpqwep Eodl * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Koşul: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: * Cargo area fitted with approx. 30 mm thick hardwood flooring * 10 pairs of folding lashing rings (LC 10,000 daN) Landing Legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out. Axles and Suspension: * BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169 K Electrical System: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking System: * Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel Structure: * Structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal coating adhesion * Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver grey * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Including Accessories: * Cargo area with approx. 30 mm thick hardwood flooring * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket * Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit) * Electro-hydraulic power unit * 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area * Load gauge for axle load determination including load chart * Lift axle on the front axle with control by TEBS E * 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm * One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction) * One shunting coupling with reinforcement attached to the rear crossmember * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted on the rear panel Ksdexttc Aopfx Ap Ejdl * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Koşul: yeni, azami yük ağırlığı: 2.115 kg, toplam ağırlık: 2.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.550 mm, yükleme alanı yüksekliği: 1.800 mm, ALUMINA L2 with High Tarpaulin - Car Trailer Technical Specifications * Trailer type: ALUMINA L2 with high tarpaulin * Gross weight: 2,500 kg * Payload: 2,115 kg * Internal dimensions (L x W x H): 310 cm x 155 cm x 180 cm * Floor: Multiplex wood flooring * Side panels: Aluminium * Loading height: approx. 53 cm * Recessed lashing points in the loading floor * Frame: Aluminium frame * Electrical system: 13-pin, 12V * Tyres: 165R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel included as standard * Suspension with shock absorbers incl. 100 km/h approval * High tarpaulin, internal height 180 cm, NOT ASSEMBLED Plus vehicle registration document / Certificate of Conformity (COC): €39.00 Prices include VAT. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also configure your custom trailer and accessories upon request: BLYSS transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. *FINANCING OR LEASING AVAILABLE Kdjdjuy Sufspfx Ap Ejl Vehicle number (for customer inquiries) Images may not correspond to standard equipment; technical modifications (e.g., tyre sizes) reserved.

Koşul: yeni, azami yük ağırlığı: 2.115 kg, toplam ağırlık: 2.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.550 mm, yükleme alanı yüksekliği: 330 mm, ALUMINA L2 PASSENGER CAR TRAILER Technical Specifications: * Trailer type: Alumina L2 * Gross vehicle weight: 2500 kg * Payload: 2115 kg * Internal dimensions: L: 310 cm, W: 155 cm, H: 33 cm * External dimensions: L: 458 cm, W: 206 cm, H: 87 cm Kdsdpfxsvufb Rs Ap Esl * Floor: Multiplex plywood floor * Side walls: Aluminium * Loading height: approx. 53 cm * Lashing points: recessed into load floor * Frame: Aluminium frame * Electrics: 13-pin, 12V * Tyres: 165R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel standard * Suspension with shock absorbers, incl. 100 km/h approval Additional cost for vehicle registration document / COC certificate: €39.00 All prices incl. VAT. Illustrations may not reflect standard equipment. Technical modifications (e.g. tyre sizes) reserved. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. Custom trailers and accessories available upon request: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. FINANCING OR LEASING POSSIBLE Vehicle number (for customer inquiries)

Koşul: yeni, azami yük ağırlığı: 1.210 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.740 mm, yükleme alanı yüksekliği: 2.150 mm, Derby S HORSE TRAILER Technical Data * Trailer type: 2-horse – wooden trailer for ponies and small horses * Gross weight: 2,000 kg * Payload: approx. 1,210 kg * Internal dimensions (approx.): L: 310 cm, W: 174 cm, H: 215 cm * External dimensions (approx.): L: 436 cm, W: 239 cm, H: 283 cm * Loading height: approx. 45 cm * Tyres: 13 inch * Braked axle * Number of axles: 2 * Body: 15 mm thick wooden walls with white plastic coating * GRP roof colour: green Kjdev Sxdgspfx Ap Esdl * Pop-up window, 5-position adjustable * Frame: robust, hot-dip galvanised frame profile * Floor: 21 mm strong multiplex wood floor * Rubber floor with hammer finish, 8 mm thick, fully bonded and sealed * Sidewall support, rear closed with lighting * Electrics: 13-pin system with reversing lights * Drop sides supported front and rear * Third brake light * Shock absorbers for chassis: high driving comfort and 100 km/h certificate * Rear ramp with lifting dampers, anti-slip step rubber and auxiliary step * One-piece ramp and door combination, standard * Large entry door on the right, dimensions H 120 x W 60 cm, safety lock * Manoeuvring handles front right and left * Side kick protection and side padding * Interior lighting and hay net ring * Roll-up tarpaulin, self-rolling * Automatic jockey wheel * Divided breast and rear bar, height and length adjustable, panic locking * Swivelling and removable partition wall Plus vehicle registration document / COC certificate €39.00 All prices include VAT. Illustrations may differ from standard specification. Technical changes (e.g. tyre sizes) reserved. ===== You may also obtain your desired caravan and accessories by arrangement: BLYSS Transportechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS Transportechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: ===== FINANCING OR LEASING AVAILABLE Vehicle number (for customer enquiries) Illustrations may differ from standard specification. Technical changes (e.g. tyre sizes) reserved.

Koşul: yeni, azami yük ağırlığı: 1.135 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.740 mm, yükleme alanı yüksekliği: 2.300 mm, DERBY M HORSE TRAILER Kdedovufbqspfx Ap Esl Technical Data * Trailer Type: 2-horse wooden horse trailer * Gross Weight: 2000 kg * Payload: approx. 1135 kg * Internal Dimensions: approx. L: 310 cm, W: 174 cm, H: 230 cm * External Dimensions: approx. L: 436 cm, W: 239 cm, H: 298 cm * Loading Height: approx. 45 cm * Tyres: 13 inch * Braked Axle * Number of Axles: 2 * Body: 15 mm thick wooden panels, white plastic coating * GRP roof: Colour: white * Pop-out window: 5-position adjustable * Chassis: robust hot-dip galvanised frame profile * Floor: Aluminum DuoMix * Rubber Flooring: hammer finish, 8 mm thick, bonded and sealed * Rear sidewall support: enclosed, with lighting * Electrics: 13-pin plug / with reversing light * Sidewall supports: front and rear * 3rd Brake Light * Wheel shock absorbers - chassis: high ride comfort and 100 km/h certification * Rear Ramp: with lift dampers, rubber tread strip, step assistance * Ramp & Door Combination: one-piece * Large entrance door on right side: Dimensions H 120 x W 60 cm, security lock * Manoeuvring handle: front right and left * Side kick protection & side padding * Interior lighting & hay net ring * Roll-up tarpaulin: self-rolling * Automatic jockey wheel * Split breast and tail bar: height and length adjustable, panic lock * Divider: swivelling and removable Plus vehicle registration document / COC certificate €39.00 All prices incl. VAT. Images may not correspond to standard specification, technical changes (e.g. tyre sizes) reserved. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also receive your custom trailer and accessories on request: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. ?FINANCING OR LEASING AVAILABLE Vehicle number (for customer inquiries)

Koşul: yeni, azami yük ağırlığı: 2.215 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.600 mm, yükleme alanı yüksekliği: 400 mm, CONDOR I FLATBED TRAILER Technical Specifications * Trailer type: Condor I * Gross weight: 2,700 kg * Payload: 2,215 kg * Internal dimensions: L: 310 cm, W: 160 cm, H: 40 cm * External dimensions: L: 464 cm, W: 167 cm, H: 110 cm * Floor: Multiplex wooden floor * Loading height: approx. 65 cm * Lashing points: 3 per side Kdodpfjvufbksx Ap Eel * Side walls: Aluminium * Chassis: Bolted steel frame * Electrics: 13-pin, 12V * Tyres: 195/50R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Support wheel as standard * Suspension with shock absorbers, incl. installation Vehicle registration document/COC certificate plus €39.00 All prices incl. VAT. Illustrations may not correspond to standard equipment. Technical changes (e.g. tyre sizes) reserved. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. We can also provide custom trailers and accessories upon request: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. FINANCING OR LEASING AVAILABLE Vehicle number (for customer inquiries)

Koşul: yeni, azami yük ağırlığı: 1.560 kg, toplam ağırlık: 2.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.740 mm, yükleme alanı yüksekliği: 2.340 mm, Apart HORSE TRAILER Technical Data * Trailer Type: 2-horse trailer, ALU construction * Gross vehicle weight: 2,500 kg * Payload: approx. 1,560 kg * Internal dimensions (approx.): L: 310 cm, W: 174 cm, H: 234 cm * External dimensions (approx.): L: 436 cm, W: 235 cm, H: 297 cm * Loading height: approx. 45 cm * Tyres: 14 inch * Braked axle * Number of axles: 2 * Body: Double-walled aluminium, silver anodised * Poly dome colour: white * Pop-out window: 5-way adjustable * Frame: Solid hot-dip galvanised frame profile * Floor: Alu DuoMix floor, 21 mm thick * Rubber floor with hammer finish, 8 mm thick, fully bonded and sealed * Rear side wall support closed, with lighting * Electrics: 13-pin / with reversing light * Bulkhead support front and rear * Third brake light * Wheel shock absorbers - chassis for high driving comfort and 100 km/h certificate * Rear ramp with lift supports, step rubber, walk-on assist * Large side access door right: H 120 x W 60 cm, security lock * Large tack compartment door left: H 90 x W 60 cm, security lock (tack room: feed bins, mirror, saddle holders rotatable and pivotable) * Manoeuvring handle front right and left * Side kick protection & side padding, interior lighting & hay net ring * Self-rolling tarpaulin blind Kjdpsvwkf Hjfx Ap Esdl * Divided breast and rear bars, height and length adjustable, panic lock * Automatic jockey wheel * Partition, swivelling and removable * AL-KO AKS anti-sway coupling plus vehicle registration document / COC certificate €39.00 All prices incl. VAT. Images may differ from standard equipment, subject to technical changes (e.g. tyre size). Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also order your desired caravan and accessories by arrangement: B L Y S S Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. Financing or leasing available Vehicle number (for customer enquiries)

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir * Takip kontroll aksı * Hidrolik yükleme rampaları * Havalı süspansiyon -----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır Kedpfxex I Uyhe Ap Ejdl WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: ikinci el, boş ağırlık: 20.320 kg, azami yük ağırlığı: 46.180 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2004, lastik boyutu: -, Üretim yılı: 2004, ref: 2220 Extra-low 3-axle rear trailer + 1 front axle (Dolly) Maximum authorized weight: 66 t Removable gooseneck trailer Extendable trailer (by 5 m) Kjdpfx Apewcrzre Ejdl Trailer with 3 forced steering axles (manual remote control) Trailer can operate with or without Dolly Total trailer length: 16.43 m + 5 m (extendable) Unladen weight: 20,320 kg + 2,520 kg for Dolly Gooseneck: L = 4.43 m Extra-low platform: L = 7.5 m + 5 m (extendable) Height: 0.5 m Trailer width: 2.74 m Platform above rear axles: L = 4.5 m H = 1.05 m Excavator arm recess Removable hydraulic rear ramps and hydraulic ramp displacement Trailer tires: 285/70R19.5 Dolly tires: 235/75R17.5 Serial numbers: YA9TL366B04113968+122B4113969

Koşul: işlem için hazır (kullanılmış), makine/araç numarası: YAFTL40900001004, azami yük ağırlığı: 80.000 kg, toplam ağırlık: 105.000 kg, lastik boyutu: 70%, dingil mesafesi: 1.360 mm, renk: kırmızı, Üretim yılı: 2009, Donanım: ABS, Country of manufacture: Netherlands Body options: Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening Additional information: Low-bed pipe carrier trailer, extendable, hydraulic suspension, laterally extendable up to 3500 mm internal and 4200 mm external width, latest generation pendulum axles. Option to add a 2-axle dolly for a 2+4 pipe carrier combination. Load capacity 85 tons. Kdsdovtygfspfx Ap Eol We have 2 identical units available in perfect condition.

Koşul: ikinci el, kilometre: 304.000 km, güç: 309 kW (420,12 bg), ilk tescil: 11/2018, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, Üretim yılı: 2018, Donanım: ABS, klima, vinç, MERCEDES ACTROS 2542 KANCALI SİSTEM + VİNÇ İthalat / Kazasız İYİ DURUMDA! ? ÜRETİM YILI: 2018 ? KM: 304.000 km Kedpfx Apjyg Ulgo Eodl DONANIM: ? ABS ? ELEKTRİKLİ CAMLAR ? ELEKTRİKLİ AYNALAR ? KLİMA ? MOTOR FRENİ ? DİREKSİYON HİDROLİĞİ ? TAKOGRAF KAPASİTE: 13.000 kg TOPLAM AĞIRLIK: 26.000 kg DINGİL MESAFESİ: 520/135 cm LASTİK EBATLARI: ÖN: 385/65R22,5 ARKA: 315/80R22,5 SÜSPANSİYON: HAVALI VİNÇ: LOGLIFT 150 Z TEL: * KUBA – POLSKA, İNGİLİZCE, ALMANCA, İTALYANCA * SEBASTIAN – POLSKA, ALMANCA, İTALYANCA, ???? * LASZLO – MACARCA * COSTEL – ROMENCE (Romana facem toate formalitatile pt export inclusiv nr) * RADEK – ???? Ref. no: 5945

Koşul: ikinci el, boş ağırlık: 4.880 kg, azami yük ağırlığı: 5.620 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 01/2018, yükleme alanı uzunluğu: 7.450 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 3.100 mm, yükleme alanı hacmi: 57 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5, arka lastik boyutu: 235/75R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Arka yükleme platformu Dautel DL1500 S, taşıma kapasitesi 1.500 kg, kendi aküleriyle, -- baskı hataları, yanlışlıklar ve değişiklikler saklı tutulur, örnek görseller --, Daha fazla bilgi için: !, More Details: ! Kdjdpfoy Rld Aex Ap Eol

Koşul: ikinci el, boş ağırlık: 4.060 kg, azami yük ağırlığı: 6.440 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 01/2018, yükleme alanı uzunluğu: 7.450 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 3.100 mm, yükleme alanı hacmi: 57 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5, arka lastik boyutu: 235/75R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: ! Ksdpfx Apjy N Rwre Eodl

Koşul: ikinci el, kilometre: 184.291 km, güç: 294 kW (399,73 bg), lastik boyutu: 385/65 R22.5, dingil konfigürasyonu: 8x4, renk: yeşil, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik, toplam uzunluk: 9.160 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.850 mm, yükleme alanı hacmi: 10 m³, Üretim yılı: 2019, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, klima, merkezi kilitleme, - Klima kontrolü - Radyo Kdedjy Ihpcepfx Ap Esl - Tavan camı