Kullanılmış Faymonville Combi-Z-10 M2+M2+M6 14.5 Meter Extandable! satın al (22.852)

Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) Ljdpfx Aljy Aufmoaorl * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Koşul: ikinci el, renk: sarı, Üretim yılı: 2013, Faymonville STZ-3UB. Baujahr: 2013. 10-Tonnen-SAF-Achsen. Leergewicht: 12.300 kg. Zuladung: 29.700 kg. Max. Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Servolenkung, 3 gelenkte Achsen. Luftfederung. Hydraulische Brücke vom Boden zum Schwanenhals. - Länge: 3.000 mm. Gelochter Boden. Seilwinde. Hydrauliksystem des Aufliegers funktioniert mit NATO-Stromversorgung. Lrodpfjy Ay Umox Alajl 2-Punkt-Hydraulikstützen am Heck. 2-Wege-Hydraulikrampen: - Länge: 2.850 + 1.750 mm. - Querhydraulik (von links nach rechts). Abmessungen: Schwanenhals: L: 3.750 mm B: 2.500 mm H: 1.400 mm Sattelhöhe: 1.200 mm Tiefbett: L: 9.550 mm B: 2.550 mm H: 900 mm Bereifung: 245/70R17,5, Profil 80 % ID-Nr.: 439. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle von Heinhuis geschlossenen Verträge sowie für sämtliche ihnen vorangehenden Verhandlungen. Durch jegliche Form der Kontaktaufnahme erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis einverstanden und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettopreise für den Export. = Weitere Informationen = Baujahr: 2013 Leergewicht: 12.300 kg Zuladung: 29.700 kg zGG: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: sarı, Üretim yılı: 2013, Faymonville STZ-3UB. Baujahr: 2013. 8-12 t SAF-Achsen. Eigengewicht: 13.400 kg. Nutzlast: 47.600 kg. Gesamtgewicht: 61.000 kg. Sattellast: 25.000 kg. Servolenkung mit 3 Lenkachsen. Hydrauliksystem kompatibel mit NATO. EBS, ABS, ALB. Hydraulische Brücke vom Boden zum Schwanenhals. Brückenlänge: 3.000 mm. Luftfederung. 2-Punkt-Hydraulikabstützungen am Heck. Zweifach hydraulisch klappbare Rampen: - Länge: 2.800 + 1.700 mm. - Hydraulische Seitenverschiebung (links/rechts). Seilwinde. Abmessungen: Schwanenhals: L: 3.700 mm B: 2.500 mm H: 1.450 mm Sattelhöhe: 1.250 mm Ladefläche: L: 9.200 mm B: 2.550 mm H: 900 mm Bereifung: 245/70R17,5, Profiltiefe 70 % ID-Nr.: 668 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge der Firma Heinhuis, alle von Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Verhandlungen. Mit jeder Form der Antwort akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2013 Leergewicht: 13.400 kg Lsdpfxsy Ay H Aj Alaorl Zuladung: 47.600 kg zGG: 61.000 kg Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: sarı, Üretim yılı: 2013, Faymonville STZ-3UB. Baujahr: 2013. SAF-Achsen, 10 Tonnen. Eigengewicht: 12.300 kg. Nutzlast: 29.700 kg. Maximales Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Dreiachslenkung mit Servolenkung. Geschlitzter Boden. Seilwinde. Alu-Bordwände am Schwanenhals. Hydraulik des Anhängers für NATO-Anschluss geeignet. Funkfernsteuerung. Luftfederung. Hydraulische Brücke zwischen Boden und Schwanenhals. Länge: 3.000 mm. Lredpfx Aey Ayz Hslajl Zweipunkt-hydraulische Abstützungen hinten. Zweifach hydraulische Rampen: Länge: 2.800 + 1.700 mm. Abmessungen: Schwanenhals: L: 3.750 mm. B: 2.500 mm. H: 1.380 mm. Sattelhöhe: 1.150 mm. Ladefläche: L: 9.600 mm. B: 2.550 mm. H: 900 mm. Bereifung: 245/70R17,5 80% Profil. ID-Nr.: 436. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Kostenvoranschläge von Heinhuis, alle von Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Vertragsverhandlungen. Mit jeder Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen und bestätigen deren Kenntnisnahme. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2013 Leergewicht: 12.300 kg Zuladung: 29.700 kg zGG: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: yeni, azami yük ağırlığı: 2.160 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.100 mm, Jupiter TX Edition Car Transporter Technical Specifications * Trailer Type: Jupiter TX Edition * Gross Vehicle Weight: 2,700 kg * Payload Capacity: 2,160 kg * Internal Dimensions (L x W): 400 cm x 210 cm * External Dimensions (L x W x H): 554 cm x 217 cm x 76 cm * Floor: Galvanized Steel Perforated Plate * Loading Height: approx. 70 cm * Lashing Points: Perforated Plate * Frame: Welded Steel, Hot-dip Galvanized * Electrical System: 13-pin, 12 V * Tires: 165 R13C * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked Axle * Support Wheel: Standard * Loading Ramps: Standard, 200 cm * Suspension with Shock Absorbers + 100 km/h Certificate * Wheel Chocks: 2 * No Spare Wheel plus vehicle registration certificate: €39.00 Prices include VAT. Ledpowkn Dfjfx Alaorl Illustrations may not reflect standard equipment. Technical specifications (e.g., tire sizes) subject to change. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=.=. Here you can also order your preferred caravan and accessories by arrangement: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:..:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: . BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. *FINANCING OR LEASING AVAILABLE Vehicle Number (for customer inquiries):

Koşul: yeni, azami yük ağırlığı: 2.074 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, Adam Deluxe with Graphite Alloy Wheels Technical Specifications: * Trailer type: Adam Deluxe with alloy wheels * Gross weight: 2,700 kg * Payload: 2,074 kg * Internal dimensions (L x W): 400 cm x 210 cm * External dimensions (L x W x H): 560 cm x 217 cm x 76 cm * Loading height: 66 cm * Floor: Standing rails, perforated steel sheet * Lashing points: Perforated sheet * Frame: Welded steel frame, hot-dip galvanized + tin-clear coating * Electrics: 13-pin, 12V * Tyres: 195/50 R13C, graphite alloy wheels * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel standard * Spare wheel with black steel rim * Cable winch * Steel loading ramps, 200 cm * Trailer lighting: LED * Shock absorber chassis, 100 km/h approval plus vehicle registration / COC certificate: €39.00 All prices include VAT. Visit us at You can also order your desired trailer and accessories after consultation at: BLYSS Transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. BLYSS Transporttechnik GmbH Dieselstraße 8 Lodpfjx I Uqaex Alajrl 85084 Reichertshofen Tel. Images may vary from standard equipment. Technical modifications (e.g., tyre sizes) reserved.

Koşul: yeni, azami yük ağırlığı: 2.074 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, Adam Deluxe with black steel rim Technical Data: * Trailer type: Adam Deluxe * Gross weight: 2,700 kg * Payload: 2,074 kg * Internal dimensions: L: 400 cm, W: 210 cm * External dimensions: L: 560 cm, W: 217 cm, H: 76 cm * Loading height: 66 cm * Floor: Stand rails, perforated steel sheet * Lashing points: perforated sheet * Frame: welded steel frame, hot-dip galvanized + clear tin coating * Electrics: 13-pin, 12V Lsdpfx Aox I Up Njlasrl * Tyres: 195 50 R13C, black steel rim * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Jockey wheel standard * Spare wheel with black steel rim * Winch * Steel access ramps 200 cm * Shock-absorber suspension, 100 km/h approval plus registration certificate / COC document €39.00 All prices incl. VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= You can also obtain your desired trailer and accessories by arrangement here: BLYSS transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:. :.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:. BLYSS transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= Illustrations may not correspond to standard equipment. Technical modifications (e.g., tyre sizes) reserved.

Koşul: ikinci el, azami yük ağırlığı: 2.160 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, Jupiter TX Used Car Transporter Technical Specifications: * Trailer type: Jupiter TX, used * Gross vehicle weight: 2,700 kg * Payload capacity: 2,160 kg * Internal dimensions (L x W): 400 cm x 210 cm * External dimensions (L x W x H): 554 cm x 217 cm x 76 cm * Loading height: approx. 70 cm * Floor: perforated galvanized steel plate * Lashing points: integrated in the perforated plate * Frame: welded steel, hot-dip galvanized * Electrical system: 13-pin, 12V * Tires: 195/50R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Support wheel: standard * Loading ramps: standard, 200 cm * Shock absorber suspension, 100 km/h approval * Wheel chocks: 2 * No spare wheel included First registration: 06/2025 TÜV valid until: 06/2026 Offer valid while stocks last! Vehicle registration document/COC certificate surcharge: €39.00 All prices incl. VAT. Please also visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.= Here you can also order your desired trailer and accessories upon request: B L Y S S Transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Ljdpfx Aeylghdolajrl Tel. .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.: B L Y S S Transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.= Images may differ from standard equipment. Technical modifications (e.g., tire sizes) are subject to change.

Koşul: yeni, azami yük ağırlığı: 2.036 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, Jupiter 4.5 Black Edition Vehicle Transporter Technical Specifications: * Trailer Type: Jupiter 4.5 Black Edition * Gross Vehicle Weight: 2,700 kg * Payload: 2,036 kg * External Dimensions (L x W x H): 594 cm x 210 cm x 68 cm * Internal Dimensions (L x W): 450 cm x 210 cm * Loading Height: approx. 67 cm * Floor: Galvanized perforated steel plate * Lashing points: integrated into the perforated plate * Frame: Welded steel, hot-dip galvanized * Electrical System: 13-pin LED, 12V Lredpfoxyckiox Alael * Tires: 195/50R13C, steel rim, black * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked axle * Jockey wheel included as standard * Loading ramps included as standard, 250 cm, steel * Manual winch included as standard * Wheel chocks: 2 units * Spare wheel with black steel bracket * Axle suspension with shock absorbers – 100 km/h certification Offer valid while stocks last! Offer available in Seesen, Dorsten, and Reichertshofen. Vehicle registration document / COC certificate surcharge: €39.00 All prices include VAT. Visit us also at You can also order your custom trailer and accessories after consultation at these locations: B L Y S S transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. B L Y S S transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. Images may not match the standard equipment; technical modifications (e.g. tire sizes) reserved.

Koşul: yeni, azami yük ağırlığı: 2.215 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.600 mm, yükleme alanı yüksekliği: 1.100 mm, Condor I High Loader with Leaf Mesh Sides TECHNICAL SPECIFICATIONS Lrsdpfeyxuvwox Alaol * Trailer type: Condor I * Gross vehicle weight: 2,700 kg * Payload: 2,215 kg * Internal dimensions (L x W x H): 310 cm x 160 cm x 110 cm * External dimensions (L x W x H): 464 cm x 167 cm x 180 cm * Loading height: approx. 65 cm * Floor: Multiplex wooden floor * Lashing points: 3 per side * Side walls: Aluminium * Frame: Bolted steel frame * Electrical system: 13-pin, 12V * Tyres: 10 inch * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel included as standard * Shock absorbers All prices incl. VAT. Vehicle registration document surcharge: €39.00 Images may show optional equipment; technical modifications (e.g. tyre sizes) reserved. Delivery: Shipping by freight carrier available; €1.50 per transport kilometre (one way within Germany from Seesen to destination), minimum charge €270.00 plus VAT. Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=. You can also obtain your desired trailer and accessories here by arrangement: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:. BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=. ?FINANCING OR LEASING AVAILABLE

Koşul: iyi (kullanılmış), kilometre: 182.847 km, güç: 140 kW (190,35 bg), ilk tescil: 04/2001, yakıt türü: dizel, lastik boyutu: 285/70 19.5, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.350 mm, yakıt: dizel, şoför kabini: gündüz kabini, vites türü: mekanik, emisyon sınıfı: euro2, süspansiyon: çelik, koltuk sayısı: 2, toplam uzunluk: 6.700 mm, toplam genişlik: 2.400 mm, toplam yükseklik: 3.300 mm, izin verilen dingil yükü (dingil 1): 5.800 kg, izin verilen dingil yükü (dingil 2): 10.300 kg, Üretim yılı: 2001, Donanım: ABS, diferansiyel kilidi, elektrikli cam sistemi, = Additional Options and Accessories = - Leaf springs front and rear - Flashing lights - Roof hatch - Toolbox - Power take-off (PTO) = Notes = - S.A.J. Huwer (Type MIXTE HU 1000 PEP ARK) canal cleaning - Tank capacity: 4,000 liters - Water tank capacity: 1,000 liters - Suction hose - Vacuum pump - High-pressure water pump - High-pressure hose reel - Multiple storage compartments = Further Information = General Information Number of doors: 2 License plate: BS-SP-94 Technical Information Number of cylinders: 4 Engine displacement: 5,998 cc Axle Configuration Tire size: 285/70 19.5 Suspension: leaf spring suspension Front axle: Max. axle load: 5,800 kg; Steering; Left tire tread: 60%; Right tire tread: 60% Rear axle: Twin tyres; Differential lock; Max. axle load: 10,300 kg; Left inner tire tread: 80%; Left outer tire tread: 80%; Right inner tire tread: 80%; Right outer tire tread: 80%; Reduction: single reduction Weights Unladen weight: 9,240 kg Payload: 5,760 kg Gross vehicle weight: 15,000 kg Maintenance, History and Condition Number of owners: 5 Technical condition: good Lrjdpsyz Rh Uofx Alasl Optical condition: good Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Koşul: yeni, azami yük ağırlığı: 2.040 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, MARS VEHICLE TRANSPORTER Technical Specifications: Ledpfx Aljyyt I Ioajrl * Trailer Type: Mars * Gross Weight: 2,700 kg * Payload: 2,040 kg * Internal dimensions: Length 450 cm, Width 210 cm * Loading height: 63 cm * Flooring: Galvanized steel perforated sheet * Lashing points: Perforated sheet * Chassis: Welded steel, hot-dip galvanized * Electrics: 13-pin, 12 V * Tyres: 195/50R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Jockey wheel standard * Winch standard * Spare wheel with bracket * Suspension with shock absorbers + 100 km/h certificate * Ramps standard 250 cm * 2 wheel chocks Vehicle registration documents/COC certificate at additional cost: €39.00 All prices include VAT. Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=.= You can also order your custom trailer and accessories by agreement here: BLYSS Transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. ... .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS Transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. ... =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=. Images may not correspond to standard equipment. Technical changes (e.g., tyre sizes) reserved.

Koşul: ikinci el, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report. Gooseneck: Lrodpsyffd Dsfx Alaol - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Extendable loading platform with rear bevel of approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-piece steel ramps: - One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning - Maximum load per pair: 40,000 kg Accessories included: - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised connection strip at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power pack - Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles - Mounting provision at rear of gooseneck for ALU approach ramps - European reflective signs (red-yellow) at rear of trailer - White reflective tape according to EU regulations at the sides, at the extension, and red at the rear - On the gooseneck and ramps, left and right, a bracket for warning signs including socket - One mount for a revolving beacon at the rear of the trailer - Galvanised folding supports under the platform’s rear slope - Control valves for the ramps mounted on the right side of the trailer - Cover plates to bridge the gap between ramps and platform - Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanised stub posts are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap - 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container - 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Galvanised platform extensions, extendable approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope - Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition - Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light - Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring - Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform - 80 km/h speed stickers at the rear and on both sides

Koşul: yeni, azami yük ağırlığı: 2.160 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, ADAM VEHICLE TRANSPORTER Technical Specifications * Trailer type: Adam * Gross vehicle weight: 2,700 kg * Payload: 2,160 kg * Internal dimensions: L: 400 cm, W: 210 cm * External dimensions: L: 560 cm, W: 217 cm, H: 76 cm * Loading height: 66 cm * Floor: perforated, galvanized steel * Lashing points: perforated steel floor * Frame: welded steel, hot-dip galvanized * Electrics: 13-pin, 12 V * Tyres: 195/50R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Jockey wheel standard * Loading ramps standard, 200 cm * Wheel chocks: 2 * Hand winch standard * Suspension with shock absorbers, 100 km/h certificate * Spare wheel with holder plus registration certificate / COC: €39.00 All prices incl. VAT. Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= You can also order your custom trailer and accessories upon request at: Ljdpfx Aoyxu Rbelajrl BLYSS Transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS Transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= Images may not correspond to standard equipment, technical changes (e.g. tyre sizes) reserved.

Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Axles: SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. Ledpsg Sk Trofx Alaerl 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Koşul: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Lredpfeg Sk T Dsx Alajl 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Koşul: yeni, azami yük ağırlığı: 36.461 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.480 mm, toplam yükseklik: 860 mm, Üretim yılı: 2026, Technical Description Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Area: Hydraulically liftable and lowerable platform after the gooseneck, approx. 2,800 mm in length, with rear taper approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of foldable lashing rings to the inside on the front central beam (LC 10,000 daN). Grating floor covering C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles tread plate covering. Two-Piece Steel Ramps: One pair of galvanized two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating covering C40/5 (point load 8 t on an area of 20 x 20 cm). Ramps with hydraulically folding ramp sections and hydraulic lifting mechanism. Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in driving position are not included in the overall vehicle length of 16,500 mm. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R17.5 3PMSF tyres at the manufacturer’s discretion. Lredsw Dl Hwepfx Alaol TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 trailing steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated by reverse gear and manually. Air suspension with lift and lower valve. Axle tools. Brake System: WABCO brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Electrical System: Electrical system complying with EU regulations, 24-volt LED lighting ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicators. ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin. Connections in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Manufactured from high-strength fine-grained steels. Steel grades: – S355J2+N / S355MC (yield strength 355 MPa) – S690QL / S700MC (yield strength 690 MPa) Curtain Body: Curtain body ??? 3,960 mm ??? – Galvanized front wall with tensioning system for sliding curtains. – "EDSCHA" brand roof, forward-sliding on ALU roof bow profiles (bolted to front and rear wall). – 3 pairs of sliding stakes in the loading area. – Rear of the body hydraulically extendable to left and right by approx. 750 mm. – Sliding roof with upwards foldable portal beam. – Sliding curtain with 700 mm length reserve, lashing straps approx. every 600 mm. – Height to upper edge of body approx. 3,960 mm (loaded). – Driving with open sliding roof is prohibited and will damage the curtain. Paintwork: Entire steel structure is automatically blast-cleaned with a wheel blasting machine after welding. Second blast treatment with corundum for optimal coating adhesion. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection. Final painting with 2 coats of 2K topcoat, single colour, shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Koşul: yeni, azami yük ağırlığı: 40.017 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading Area: 5 pairs of fold-out lashing rings (LC 5,000 daN). 3 pairs of fold-out lashing rings (LC 10,000 daN). 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN). Hardwood flooring approx. 48 mm thick, tread-plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Lodsw Dl Hqepfx Alaorl Tyres 205/65 R17.5, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface as per ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles: two fixed axles, two self-steering axles, air suspension, drum brakes, lifting/lowering function. The self-steering axles have electro-magnetic reverse lock, activated via reverse gear or manually. Axle tool included. Brake System: WABCO brake system compliant with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit. Electrical System: Electrical system as per EU regulations, 24 Volt LED lighting ASPÖCK-NORDIK (ASS3). All LED side marker lights synchronise with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections in accordance with ISOs: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel structure automatically shot blasted after welding using a shot blasting system. Second blasting treatment with corundum for optimum adhesion of the coating system. HRM metallisation of the complete chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final painting: two coats of 2-pack topcoat, single-colour in a shade of choice according to the RAL 841GL system. Rear section metallised and painted in RAL 9010 (pure white). Metallic finishes not available. Paint specification tested according to salt spray test ISO 9227-NSS. Cavity sealing with special wax. Options Included: 2'' kingpin One galvanised steel front wall. Yellow-red air couplings fitted to the galvanised front connection rail. 2 wheel chocks with holders on the front wall. Mountings at the rear of the gooseneck for ALU ramps. Further options available.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Kullanılmış 20 ve 40 fitlik soğutuculu konteynerlerimizi kiralık olarak sunuyoruz. Üniteler: ✔ Carrier ünite veya Thermo King ✔ PTI kontrolü yapılmış ✔ -25 ila +25 derece sıcaklık aralığı ✔ Alüminyum T zemin (iç) ✔ Paslanmaz çelik iç duvarlar Kiralama fiyatları aşağıdaki gibidir: Kısa süreli kiralama (30 güne kadar): 550 € 90 günden itibaren: 450 € Uzun süreli kiralama (364 günden itibaren): 350 € Ek önemli bilgiler: 20 fit: Dış ölçüler (U x G x Y): 6095 x 2440 x 2590 mm İç ölçüler (U x G x Y): 5775 x 2286 x 2246 mm Ledpjyrry Sofx Alajrl 40 fit: Dış / İç ölçüler Uzunluk: 12.192 mm / 11.590 mm Genişlik: 2.438 mm / 2.294 mm Yükseklik: 2.896 mm / 2.554 mm Çalışma gerilimi: 380V/50 Hz Gerekli bağlantı: 5 kutuplu 32A Güç tüketimi: 4,5 kWh ile 10 kWh arası Almanya genelinde taşıma, ek ücret karşılığında mümkündür! Yerinde boşaltma için de memnuniyetle teklif sunarız. İster kiralama ister satın alma olsun, taleplerinizi bekliyoruz! Globaltainer Ekibi

Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform Ljdpfx Aloyvnfgoaerl * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Koşul: yeni, azami yük ağırlığı: 2.036 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, Jupiter Black Edition with Alloy Wheels Technical Specifications * Trailer Type: Jupiter Black Edition, alloy wheels * Gross Weight: 2,700 kg * Payload: 2,036 kg * Internal Dimensions: L: 450 cm, W: 210 cm * External Dimensions: L: 594 cm, W: 210 cm, H: 68 cm * Loading Height: approx. 67 cm * Floor: Galvanized steel perforated plate * Lashing Points: Perforated plate * Frame: Welded steel, hot-dip galvanized * Electrics: LED, 13-pin, 12V * Tyres: 195/50R13C, alloy wheels * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked Axle: Yes * Jockey Wheel: Standard, automatic jockey wheel * Loading Ramps: Standard, 250 cm steel * Winch: Standard equipment * Wheel Chocks: Yes * Rear Support Stands: 2 * Suspension: Shock-absorber suspension, incl. 100 km/h approval * Spare Wheel with Steel Holder Lodpfx Aloyvdr Uoaorl Offer valid only in Dorsten. Vehicle registration document / COC certificate: €39.00 extra All prices incl. VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= Here, you can also obtain your custom trailer and accessories upon arrangement: B L Y S S transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= Images may not reflect standard equipment. Technical modifications (e.g., tyre sizes) reserved.

Koşul: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specifications. Complete specifications available on request. Loading area: * Loading platform with approx. 30 mm thick hardwood floor * 9 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm Landing legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: * BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable Lrodpfx Aeyu Eu Islaol * Air suspension with lift/lower valve Brake system: * WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot blast machine * Second abrasive treatment with corundum for optimal coating adhesion * HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system * Rear section metallized and painted in RAL 9010 Pure White * Rims painted silver-grey * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories included: * Loading platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high * At the galvanized front connection strip, DUOMATIK air couplings * Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear * Mounts for warning boards, including sockets, left and right at gooseneck and rear panel * White reflective tape on the sides and red at the rear, according to EU regulations * 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame * European reflective signs (red-yellow) at the rear of the trailer * Mount for a flashing beacon at the rear of the trailer * One rear mud flap * Manual and documentation on USB stick * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump * 4 wheel chocks with holder on the front wall * Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Koşul: yeni, boş ağırlık: 900 kg, azami yük ağırlığı: 2.600 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.350 mm, yükleme alanı genişliği: 1.800 mm, yükleme alanı yüksekliği: 300 mm, yükleme alanı hacmi: 1,8 m³, renk: diğer, inşaat yüksekliği: 1.070 mm, çalışma genişliği: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Ferro Permissible Gross Weight: 3,500 kg Payload: 2,600 kg Unladen Weight: 900 kg Body Dimensions: 3,350 x 1,800 x 300 mm Tyres: 185 R 14C with black steel rims Loading Height: 750 mm 3-way tipper - Parabolic suspension including 100 km/h road approval - Chassis fully welded and hot-dip galvanized - Robust hydraulic cylinder with electrically operated pump and manual emergency pump - Load bed made from hot-dip galvanized sheet steel - TÜV-certified load securing system - 4 removable corner stanchions - Aluminium side walls, 30 cm high, with robust integrated latches - Heavy-duty foldable jockey wheel - Aluminium loading ramps integrated under the bed, including U-profile - Stable fold-out crank supports - Battery charger supplied loose - Only BPW original parts used - 13-pin plug Price includes vehicle registration certificate (Part II registration and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide free temporary transfer number plates. We repair trailers of all manufacturers. Additional accessories available upon request. Technical specifications, prices, and errors subject to change. No liability is accepted for errors or typographical mistakes. Additional Features: Aluminium loading ramps integrated under the bed, robust hydraulic cylinder with electric pump, reverse automatics, rubber suspension axle, independent suspension, tiltable loading platform, heavy-duty foldable jockey wheel, clearance lights, load floor made of hot-dip galvanized sheet steel, overrun brake, includes warranty, chassis fully welded and hot-dip galvanized, TÜV-certified load securing system, 4 removable corner stanchions, aluminium side walls, 30 cm high, with sturdy integrated latches, including U-profile, stable foldable crank supports, battery charger supplied loose, BPW original parts only, 13-pin plug. Lsdpfxjtmd U Ej Alasrl

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2006, toplam genişlik: 2.850 mm, süspansiyon: diğer, lastik boyutu: 285/70R19.5, renk: siyah, Üretim yılı: 2006, Donanım: ABS, = Additional Options and Accessories = - Central lubrication = Remarks = Faymonville Jeep Dolly D3 Year: 10-2006 • 1 x lift axle • 1 x friction-steered axle / trailing steering Ledpfxoxbng Eo Alaorl • Air suspension • Max. technical weight: 56,000 kg Faymonville STBZ-5VA Year: 10-2006 • Pendle axle • Removable gooseneck • Movable table • Extendable bed: 400 cm • Load bed: 650 + 400 cm • 50,000 kg gooseneck load • Max. technical weight: 119,680 kg = Further Information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tires; Tire tread left inside: 15%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Suspension: Air suspension Front axle 2: Twin tires; Tire tread left inside: 30%; Tire tread left outside: 30%; Tire tread right inside: 40%; Tire tread right outside: 60%; Suspension: Air suspension Front axle 3: Twin tires; Steering; Tire tread left inside: 30%; Tire tread left outside: 70%; Tire tread right inside: 60%; Tire tread right outside: 70%; Suspension: Air suspension Rear axle 1: Twin tires; Steering; Tire tread left inside: 30%; Tire tread left outside: 60%; Tire tread right inside: 40%; Tire tread right outside: 70%; Suspension: Hydraulic suspension Rear axle 2: Twin tires; Steering; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 30%; Tire tread right outside: 75%; Suspension: Hydraulic suspension Rear axle 3: Twin tires; Steering; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Suspension: Hydraulic suspension Rear axle 4: Twin tires; Steering; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 40%; Tire tread right outside: 50%; Suspension: Hydraulic suspension Rear axle 5: Twin tires; Steering; Tire tread left inside: 70%; Tire tread left outside: 70%; Tire tread right inside: 20%; Tire tread right outside: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide correct information, but no rights can be derived from the listed texts.

Koşul: ikinci el, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2024, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, Üretim yılı: 2024, Donanım: ABS, For every used semitrailer, you will receive a current and comprehensive inspection and functional report. Lredpfx Aoypb Akelasl Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading area: - Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° - A recess in the loading platform, including into the chamfer, for accommodating the excavator bucket arm - Pneumatic locking system with conical locking pins and reinforced locking positions - Hardwood flooring on the loading platform chamfer Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps laminated with hardwood - Hydraulically foldable ramp tips - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - Square serrated crossbars 20 x 30 mm, every approx. 200 mm on the outer frame of the ramp Axles and suspension: - BPW axles and suspension, first axle self-steering, all other axles hydromechanically forced steering - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre sensors Accessories included: - Removable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations - 1 spare wheel - External beams of the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU sidewalls, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - 2" king pin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, foldable lashing rings in the outer frame of the loading area - Expandable (galvanized) extensions up to approx. 230 mm per side - Wheel recesses with square serrated strips, 15 x 15 mm, continuously open ahead of the axles up to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel recesses - ALU elements lockable on the extension tubes of the width extensions - Expandable U-profiles for ALU covers - Wheel recesses with square serrated strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU elements lockable on the extension tubes of the width extensions - 1 pair of mechanical rear supports - Rear steering operable from front and rear via cable remote control, with axle tracking control - 1st axle with automatic lift axle function and starting aid in accordance with EU Directive 2021/535 - Under the gooseneck and at the rear crossbar left and right, each with a 7-pin socket with holder for warning boards - Square serrated strips 20 x 30 mm, every approx. 200 mm on the outer frame of the loading platform chamfer - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, in addition to cable remote - Wabco Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm