Kullanılmış Müller-Mitteltal Etue-Ta 11,9 Tandem Tieflader satın al (14.041)

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) Godpjpk D Awofx Aqtjbn * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: Gbsdjvin Ucopfx Aqtsn * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: Gbjdpfx Aqovin T Sjtjn * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 14.4 ----Braking System: Gbjdpfxsv Dz N Ne Aqtjn * Wabco EBS * Emergency release device for spring-type actuators * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by approx. 300 mm) with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized, bolted underride protection * Tool box made of galvanized sheet steel, mounted on the right-hand side * Plastic quarter mudguards * Two-step entry on the left side for easy access ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power socket * LED rear lights ----Tipper Body: * Steel pallet 3-way tipper body * Continuous top side walls with internal tube reinforcement – without central stanchions – foldable with tailboard spring assist * Tailgate both fold-down and swinging, operates via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Net hooks, guide rail at the rear for loading ramps * Prepared for later retrofit with side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into outer frame on each side ----ALU Loading Ramps: * 1 pair of aluminum loading ramps (approx. 3,570 x 400 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, installed in the chassis under the loading platform at the rear ----Tires: * Tires 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks, and landing gear painted black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Body side panels painted in customer-specified RAL color (no special or metallic finishes), color change possible until approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Drawbar Eye: * Drawbar with 40 mm bolted towing eye (height adjustable, mm) ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for adjustable support heights * Closed steel mudguards with spray protection * Closed side underrun protection usable as advertising space * Plastic toolbox with bottom insert (installed lying down), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension latch for drum securing at the carrier arm ends and locking of the cable drum structure to the chassis through a centrally positioned claw lock * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: Gedpfxju I Iqxj Aqtsbn * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2-in-1 = for roll-off containers and as a low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles ----Suspension: * Air suspension with lifting and lowering system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) Gbjdsl Tq Nmepfx Aqtsn * LED rear lights 12 / 24 V * 15-pin electrical connector ----General attachments: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper buffer * Folding A-sign at rear ----Loading platform: * Main frame with raised outer rails for guiding roll-off containers * Steel floor plate with recesses for rollers in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1 * Weld bead as anti-slip surface in the inclined running track area * Mechanical drop-down rear supports ----Load securing: * 1 pair 10 t UVV lashing rings at the front bulkhead support * 3 pairs 10 t UVV lashing rings at the lateral outer frame * On each side, 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * But the drawbar, axles, and air tanks painted in a black tone ----Information: * New vehicle, never registered, with full manufacturer's warranty * Subject to errors and prior sale * Reference images ----Delivery time: * Available approx. from CW 43 / 2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders Godpetplv Tjfx Aqtobn * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm screw-type coupling eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear, with base plate and safety lock pins for various support heights * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, suitable for use as an advertising surface * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms: 1,700 mm, with clamp lock for securing the drum at the support arm ends as well as central claw lock for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of high-grade polyamide centering cones, step-shaped ----Chassis: Gbsdpfx Aqeu I Iqlsten * Frame made of torsion-resistant square tubing and cross beams ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Braking System: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Drawbar Eye: * Drawbar with 40 mm bolted drawbar eye (height-adjustable, mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General Attachments: * Front landing leg * Rear spring-assisted square tube supports with base plate and safety locking pins for adjustable support heights * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, usable as an advertising surface * Plastic toolbox with floor liner (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure * Clear internal width between drum arms 1,700 mm * Locking latch for drum securing at carrier arm ends and central pawl lock connecting the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor Gbedpfxeu I Iq Es Aqtjn * Valves and adjustable rubberized drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 1 pair stepped centering cones made of polyamide ----Chassis: * Chassis constructed from torsion-resistant box sections and cross members ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Further Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front Gsdpol Th A Esfx Aqtjbn * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted on the right-hand side * Plastic quarter mudguards * Two-step access on the left side as climbing aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electric power connector * LED taillights ----Tipper body: * Steel pallet-type 3-way tipping body * Continuous top side walls with internal tube reinforcement – foldable, without centre stanchions, with drop-side torsion spring assist * Fold-down tailgate with manual central locking, can also be operated in swing mode * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grained steel floor plate * Lashing hooks, mounting rail at the rear for loading ramps * Prepared for retrofitting extension side panels ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner equipped with 1 x 5 t lashing ring, plus 4 x 3 t lashing rings recessed into the external frame on each side ----Aluminium loading ramps: * 1 pair of aluminium ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment underneath the loading surface, recessed into the chassis at the rear ----Tyres: * Tyre size 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted in a black shade * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sideboards painted in RAL 9010 Pure White * Side wall paintwork in a RAL colour available at extra cost ----General Information: * Reinforced superstructure with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29/2026

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Drawbar Eye: * Drawbar with 40 mm bolted drawbar eye (height adjustable, mm) ----Electrical / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at front * Spring-assisted square tube supports at the rear with base plate and safety locking pin for various support heights * Enclosed mudguards made of steel sheet with spray protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; equipped with tension lock for drum securing at carrier arm ends as well as a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotatable ends * 1 pair of polyamide centering cones, gradually offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump Unit: * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and hand starter * 13 hp with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf Gbedpfx Aou I Iqfjqton

Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2-in-1: For hook lift containers and as a low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 ton axles Gjdpfx Aqjl Tpc Astsbn ----Suspension: * Air suspension with lifting/lowering system and RTR valve ----Drawbar: * Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * LED rear lights, 12 / 24 V * 15-pin power plug ----General Attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Folding A-board at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll-off containers * Steel floor plate with roller recesses in the bogie area * Container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1 * Weld seam as non-slip coating in the ramp area * Mechanical falling supports at rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs of 10 t UVV lashing rings on the sides in the outer frame * 4 x 2 t cloverleaf-type lashing eyes per side * 4 x 8 t lashing brackets set into the outer frame ----Ramps: * 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, and rear supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black tone ----Information: * New vehicle, never registered, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 43 / 2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope Gbsdpfx Aopk D Iijqtjn * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Closed plastic mudguards, front & rear axle * Closed side underrun protection * Rear underrun guard bolted Godpfxex Ipa As Aqtsbn * Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear impact protection buffers ----Electrics / lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container guidance surface / tipping frame: * External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment * To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock * The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside * Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking components (without top coat) * Turntable, air reservoir, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * Suitable for container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Sample images (actual vehicle photos may vary due to optional equipment) ----Delivery time: * Available from CW 24/2026

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Brake: * EBS braking system * Drum brake * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Towing Eye / Flange Mount: * Tow bar with 40 mm bolt-on towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system Gbedpfx Asu I Iqrsqtjn ----General Attachments: * Support winch at front * Spring-assisted square tube supports at rear with base plate and safety locking pins for various support heights * Enclosed steel mudguards with splash guards * Enclosed, side underride protection usable as advertising space * Plastic toolbox with base insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with locking mechanism at the ends of the carrying arms for securing the drum, as well as central claw locking to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped design ----Chassis: * Chassis made of torsion-resistant square tubes and crossmembers ----Pump Unit: * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * Unladen weight 2,690 kg ----Coating: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: Gbedpfx Aqox Ipapotjn * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: Gjdpfx Asw Ndr Uoqtebn * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug Gjdpfxjx Ipbme Aqtebn * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck Gbedoykx I Hspfx Aqtsn * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Gbedpsykx I Tsfx Aqtsn * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: Gjdjx Ipbajpfx Aqtobn * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Durum: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0 * Suitable for 2x 12 m³ containers/skips * Lowerable pneumatic drawbar for front loading * Adjustable stop point for container mounting * Manual lashing with ratchets * Sealed floor * BPW axles * Leaf suspension * Galvanised frame/chassis * Drum brakes * Wear plates * Additional auxiliary lights * 7 lashing rings per side, mounted externally * Large toolbox * Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg * German vehicle with German documentation! * 1st owner! * First registration: 21.10.2014 * Vehicle inspection (TÜV) valid until 03/2027 * Safety inspection (SP) valid until 09/2026 * VIN: WMM00000E0058208 Gedpfx Aezbbbdsqtebn Subject to prior sale, errors, and changes! Some company logos have been removed from the images – please ask if needed! No guarantee for the functionality of extra features! Your contact: Christoph Ott Tel. & WhatsApp:

Durum: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Braking System: * EBS brake system * Drum brakes ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED lighting * Flashing LED side marker lights ----Drawbar / Flange Towing Eye: * Drawbar with 40 mm screwed towing eye (height adjustable, mm) ----General Attachments: * Support winch at front * Spring-assisted square tube supports at rear with base plate, safety locking bolts for various support heights * Closed steel fenders with splash guards * Closed side underrun protection, usable as advertising space * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the support arm ends, as well as fixation of the cable drum superstructure to the chassis by a centrally positioned claw lock * Motorized hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotatable ends * 1 pair of polyamide centering cones, stepwise offset * Preparation of steel construction and hydraulics for retrofitting a separate motor ----Chassis: * Chassis made from torsion-resistant square tubes and crossbeams ----Hydraulic System: * Hydraulic supply and return lines ----Tyres: * 315/80 R 22.5 tyres ----Paintwork: * Vehicle is hot-dip galvanized ----Information: Gbodpfexyniwex Aqton * 2,690 kg unladen weight * Brand new vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: ikinci el, azami yük ağırlığı: 18.150 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, yükleme alanı uzunluğu: 8.300 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * 5-chamber rear lights Godpfszaln Sex Aqtobn * Duomatic air coupling * Gigant axles * Rear support --- Superstructure: Low loader trailer (1,800 + 6,500 mm) / loading height approx. 920 mm, tapered at the rear / ramp height approx. 770 mm, steel/wood floor, hydraulic access ramps (galvanized), load capacity 15,000 kg/ramp, lashing rings and lashing eyes Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION PROVIDED WITHOUT WARRANTY, INCLUDING EQUIPMENT AND ACCESSORIES. All purchase agreements, invoices, proforma invoices, orders, and sales discussions are based on our General Terms and Conditions (see Legal Notice).

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Gbsdpfxepk Dyxs Aqtsn * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange drawbar eye: * Height-adjustable (±150 mm) hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General attachments: * Jost support winch at the front * 2 x external drop-down support legs at the rear * Enclosed single plastic mudguards * Foldable A-sign at the rear * Plastic underride guard buffer * Hot-dip galvanized impact guard with integrated chain storage box (W=370 mm x D=420 mm x H=480 mm), front left and right ----Load securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain boxes on the external frame * Balancing chain on both sides with eye and quick-shortener, special Y-version, 6.3 t ----Skip stops: * 2 removable skip stops for lateral centering of containers * Front skip stops with swiveling stop, lockable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and support winch painted in black tone ----Info: * Certified lashing force with load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from approx. week 38/2026