Kullanılmış Müller-Mitteltal Ka-Ta-R 11,9 Breitreifen, Alu-Rampen, Led satın al (57.669)

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding Fodpfx Aex Nlkajggjph ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps Fsdpfoykx Nqjx Aggoph * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri Fpedpfx Aowyhzpoggeh * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 Fpedpsx Ipbmefx Aggoh ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering function featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads) * SmartBoard control unit as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation * Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height) * Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis * Mechanically adjustable warning signage package front and rear * Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on slope * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm steel front wall, slotted in * Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets * One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side * Various drill holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.) * New vehicle with manufacturer warranty Fpsdpfx Aor Dpz Aeggeh * Errors and prior sale excepted * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck Fedpfxeykx I Ho Aggjph * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized Fjdpfoxl Nkgjx Aggjph * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: Fpsdpfx Agox Ipbajgsh * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm Fpjdpox Nlkgjfx Aggeh ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fpedpfsykx I Tjx Aggeh Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0 * Suitable for 2x 12 m³ containers/skips * Lowerable pneumatic drawbar for front loading * Adjustable stop point for container mounting * Manual lashing with ratchets * Sealed floor * BPW axles Fodpfxozbbbde Aggsph * Leaf suspension * Galvanised frame/chassis * Drum brakes * Wear plates * Additional auxiliary lights * 7 lashing rings per side, mounted externally * Large toolbox * Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg * German vehicle with German documentation! * 1st owner! * First registration: 21.10.2014 * Vehicle inspection (TÜV) valid until 03/2027 * Safety inspection (SP) valid until 09/2026 * VIN: WMM00000E0058208 Subject to prior sale, errors, and changes! Some company logos have been removed from the images – please ask if needed! No guarantee for the functionality of extra features! Your contact: Christoph Ott Tel. & WhatsApp:

Durum: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 05/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * RDÜ tire pressure monitoring system * EBS brake system, drum brakes, BPW axles, parabolic springs * Front support winch, rear spring-assisted square tube supports with base plate, safety lock pins for various support heights * Tow bar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, fully covered steel mudguards * Swiveling cable drum superstructure * Steel drum shaft with 76 mm diameter, with centering and rotating ends Fedpfxjy Rb Tye Aggoph * 1 pair of stepped polyamide centering cones * Suitable for drums Ø 800-3,000 x (1,700 mm width between drum arms) * With tension lock for securing the drum at the carrier arm ends, and a locking device between the cable drum superstructure and the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive is motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and drum drive brake. * Also includes a hydraulic power unit: Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable either via truck hydraulics or the power unit by swapping connection lines * Toolbox approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated into the side guard, exterior polyester-coated in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing is possible through our partners with or without down payment and final value, and with various terms. Contact us for a quote! * We are an official Müller Mitteltal dealer! * Example hire-purchase from our partner FM LeasingPartner starting from only €515/month (net) for a 72-month term (no down payment and €0 final value). * Request your quotation now! ---- * Our Opening Hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, appointments can be arranged as needed * We speak German, English, Russian, Polish and French ----

Durum: yeni, Üretim yılı: 2026, New model, now with 9,900 kg gross vehicle weight! Cable drum transport trailer. Permissible gross weight: 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol, 8.1 kW, electric start) with weather protection cover, hydraulically driven drum with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centring cones for cable drums. Dual-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tyre pressure monitoring. Height-adjustable 40 mm towing eye, 2-line air, LED lighting 12+24 V. Toolbox, advertising panels integrated into the side underrun protection. Fully hot-dip galvanized vehicle. New vehicle including factory warranty. Available from approx. week 26, 2026. (Archive photos) Fpodpsyyhb Nsfx Aggsh = Further information = Unladen weight: 2,900 kg Payload: 7,000 kg Gross vehicle weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Durum: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 04/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * LIKE NEW and available * Inquiry Reference Number: 11652 * TPMS Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic springs * Support winch at front, spring-assisted square tube supports at rear with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm draw eye (height adjustable in mm) * 15-pin power connector * LED lighting * 315/80 R 22.5 tires, full steel mudguards * Swiveling cable drum attachment * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped for adjustment * For drum diameters Ø 800-3,000 mm x (1,700 mm width between drum arms) * With locking clasp to secure drum at the support arm ends and a central claw lock to secure the cable drum attachment to the chassis Fodpjzbfmwofx Aggeph * Motor-hydraulic operated pull and push cylinders with pipe rupture safety. Control valve with automatic neutral return, pressure relief valve, and lowering throttle. Hydraulic connectors, hoses, and pipes in NW 13. * Hydraulic drum drive with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed control and brake for the drum drive * Additionally, hydraulic pump unit with Hatz 1B30 Silent diesel engine and manual starter, 6.5 HP (150 bar), pressure supply selectable via truck hydraulics or integrated pump unit by switching supply lines * Toolbox approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated in the side protection, exterior polyester-coated in RAL white * ----Like new condition (used for only 1 project) * ---- * Financing available via our partners, with or without down payment or residual value and various terms possible. Request your offer! * We are an authorized Müller Mitteltal dealer! * Example hire purchase via our partner FM LeasingPartner starting from just €595/month net for a 60-month term (without down payment or residual value). * Request your personal offer! ---- * Our Opening Hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside those hours, appointments are available upon request. * We speak German, English, Russian, Polish, and French. ----

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange drawbar eye: * Height-adjustable (±150 mm) hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: Fedpjpk Dyxjfx Aggoph * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General attachments: * Jost support winch at the front * 2 x external drop-down support legs at the rear * Enclosed single plastic mudguards * Foldable A-sign at the rear * Plastic underride guard buffer * Hot-dip galvanized impact guard with integrated chain storage box (W=370 mm x D=420 mm x H=480 mm), front left and right ----Load securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain boxes on the external frame * Balancing chain on both sides with eye and quick-shortener, special Y-version, 6.3 t ----Skip stops: * 2 removable skip stops for lateral centering of containers * Front skip stops with swiveling stop, lockable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and support winch painted in black tone ----Info: * Certified lashing force with load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * 2 x external drop-down support legs at rear * Closed plastic single mudguards * Foldable A-sign at rear * Plastic underrun bumper with protection buffers * Hot-dip galvanized bumper with integrated chain storage box, size: W = 370 mm x D = 420 mm x H = 480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning devices ----Container Stops: * 2 removable container stops for lateral centering of containers * Front container stops with pivotable stops, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air reservoirs, and landing gear painted black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Fpodpsl Thyqefx Aggoh * Available from approximately CW 38/2026

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable Fpjdpfol Th I Aox Aggsh * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t Fedpfx Aol Th Nnjggoph ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and lifting of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: Fpsdpfoy Tr Hiox Aggjh * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange eye: * Drawbar with adjustable K80 ball coupling ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: * Support winch at the front * Bolt-on steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking) * 5mm steel floor made of HARDOX-450 or equivalent ----Load securing: * 4 x 3 t UVV lashing rings recessed in the outer frame on each side ----Paintwork: * Axles, air tank, support winch, flange eye painted in black tone * Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24V with galvanized protective housing ----Drawbar / Flange Tow Eye: * Drawbar with K80 ball coupling, adjustable mm (dimensions not specified) ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines Fjdjy Tr Hcjpfx Aggoph ----General Attachments: * Landing leg at the front * Bolted steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter) * Left side wall foldable with drop-side hydromat * Tailgate swinging via automatic hook lock * 5mm steel floor made of HARDOX-450 or equivalent ----Load Securing: * 4 x 3 ton UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, landing leg, flange tow eye painted in black * Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grilles for rear lights, hot-dip galvanized ----Notes: * Sample images ----Delivery Time: * The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026

Durum: ikinci el, azami yük ağırlığı: 18.050 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2010, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, • Spring ramps • Spare wheel holder • 7 lashing rings per side • 4 stake pockets per side • 50 mm towing eye • Loading height: approx. 910 mm • Drum brakes • ABS • Leaf suspension • EBS • Twin tires Fpjdey T Tvxopfx Aggjh All information subject to change / prior sale reserved.

Durum: ikinci el, azami yük ağırlığı: 6.610 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2017, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 34 m³, Üretim yılı: 2017, Donanım: ABS, 2-Axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer VIN: H0061885 Chassis / Attachments: * Air suspension * Tyres: 235/75 R17.5 * Remaining tread: approx. 70% * 1x Jost landing leg * 2x rear support legs Body: * Pr.+Pl. * Sliding tarpaulin * Edscha sliding roof * Dimensions: 5,500 mm x 2,470 mm x 2,500 mm * Approx. 34 m³, 13 pallets Weights: * GVW: up to 10,500 kg – downrated to 10,000 kg (no SP required) * Unladen weight: 3,390 kg * Payload: 6,610 kg Other details: * German vehicle * MOT valid until 10/2026 * No SP required due to weight downrating New MOT (main inspections), safety tests, or weight uprating/downrating can be arranged on request. We are happy to assist in obtaining export/transfer license plates, and we can also organise vehicle transfers within Germany. Contact us! --- We speak: German, English, and Russian! --- No liability for typographical or printing errors, changes, prior sale, and errors excepted! ---Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our long-standing experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent contact person who assists them in purchasing or selling vehicles. See for yourself! Fpedjy Squpepfx Aggeh Our services for you: Loading of vehicles We are happy to assist you in loading your purchased vehicles. Organising special transports We can assist you with organising special transports. Day plates/export license plates We are glad to help you obtain export or short-term licence plates. Customs clearance We are happy to assist you with customs formalities.

Durum: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal Düşük Yükleyici, Jant Kovuklu TS 3 RM ML 30,0 - 2 Yükseklik ve Rampa Özellikli Fsdpfxoy R Ipuo Aggoph * 12 t’den 18 t’ye artırılmış Kingpin yükü dâhildir. Kingpin aşağıdaki şekilde monte edilmiştir: İkinci kingpin pozisyonu 2”, kingpin kröpfung (kıvrım) 2.750 mm’ye kadar dâhil. Arkada serbest döndürme yarıçapı yaklaşık 2.400 mm (minimum 150 mm boşluk tavsiye edilir). Öne doğru serbest döndürme yarıçapı 1.480 mm veya yedek lastikle 1.570 mm. Not: Çekici araç ile yeterli boşluğun müşteri tarafından sağlanması gerekmektedir. * Ön ve arka alt jant kovukları için uzatılabilir parçalar (205 mm derinlik). Jant kovukları için toplam 6 adet yerleştirme kirişi. Kiriş tutucu olarak kabul edilen ALU basınçlı hava tankı (kod 09.112) çelik yerine. * Smartboard kumanda kutusu, treyler üzerinde bilgi aracı olarak monte edilmiş ve basınç sensörleri ile toplam dingil yükünü ekranda gösterecek şekilde ayarlanmıştır. Gösterge, ya kumanda kutusu üzerinden ya da EBS hava süspansiyon sistemiyle (üreticiye bağlı olarak) kamyondan izlenebilir. * SP-Kombi-Paket: Takım kutusu, 45° köşeli galvanizli çelik sacdan imal, ek olarak RAL 9006 beyaz alüminyum toz boya kaplama, platformda monte B=2.480 x Y=500 mm üst kapaklı, yan kapaklı ve eğimli, alüminyum yan duvarlar aşağı katlanabilir (500 mm yüksek), alüminyum arka duvar 150 mm yüksekliğinde çıkartılabilir, iç ve dış alüminyum yan paneller RAL 9006 beyaz alüminyum boya kaplı. Dahil: Katlanabilir ve çıkarılabilir arka dikmeler, galvanizli (boyasız). Vidalanmış ön yapı dâhil. Ön kiriştan kröpfung’a uzunluk: 3.935 mm; kröpfung ölçüsü 2.450 mm veya 2.750 mm’de öne doğru döndürme yarıçapı: yaklaşık 1.750 veya 1.480 mm. * Ön kirişte gömme 2 adet konteyner kilidi bulunur * Sadel platformun altında 3 adet yerleştirme şaftı, tercihe göre alüminyum rampa veya jant kovuk kapama için tahta tutmak için * Katlanır/uzatılabilir konsollar (galvanizli) ve genişletme için ahşap çıtalar dâhil (arka eğim hariç), çıta tutucu platformda (yükün maksimum genişliği 2.500 mm) * Ön ve arka uyarı paketli ikinci LED pozisyon lambası (Çift aydınlatma), sadece uyarı paketiyle birlikte * Treylerin arka tarafında 2 adet LED geri vites farı, geri vitesle etkinleşir (12 V ve 24 V’a uygun), maksimum 2 adet ek olarak kullanılabilir * Arka tarafta 7 pinli priz, fazla uzunluk aydınlatması için (arka lamba 58 R) ve şasi ucu için * Rampaların iç çıtasında, sol ve sağ yükleme eğiminde (yaklaşık 860 mm uzunluğunda) lastik kaplama şeritler, tek parça rampada iç çıta üzerinde lastik kaplama * Otomatik merkezi yağlama sistemi, pompalı (24V), gres tankı ve entegre treyler kontrolü ile - rampalar hariç (direksiyonlu araçlarda platform dağıtıcısına bağlantı dâhil) Not: Sadece 24V aydınlatma sistemli çekici araçlarda kullanılabilir! Ara satışı ve hata yapma hakkı saklıdır! Satış yalnızca genel satış şartlarımız (AGB) ile yapılır Önemli Bilgilendirme: Tüm detaylar dikkatlice kontrol edilmekle birlikte, bazen sistemler arası aktarım hatalarından dolayı yanlış bilgi oluşabilmektedir. Bu nedenle, tüm bilgiler taahhüt niteliği taşımamakta olup hukuki bağlayıcılığı yoktur. Yasal Uyarı: Bu ilan, BGB’nin 145. maddesi anlamında bir teklif değildir. Sadece sözleşme öncesi bilgi içermektedir ve verilen detaylar garanti edilmemektedir, taahhüt edilmiş özellikler değildir.

Durum: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026 Fedjtr Sucepfx Aggsph

Durum: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall Fsdpfx Astr St Ueggeph * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026