Kullanılmış Müller-Mitteltal T3 Df 30.0 | Hydr. Rampen*Verbreiterbar*Hu 01/27 satın al (12.760)

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Brakes: Ppjdpfx Asylfvmeiber * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lift and lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display option on truck display via EBS signal (no installation required on truck side) * SmartBoard infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning board packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed single plastic mudguards * Rear straight steel mudguards, each with spray suppression * Side underrun protection ----Low Loader Platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable lids * Floor on the turntable platform made of 50 mm softwood, and on the low-bed platform of 60 mm softwood * 20 mm rubber mat instead of wooden flooring in the running area with a low-bed length of 6,780 mm including the drive-up slope * Rubber mat on the drive-up slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes supplied), simultaneously offering 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lasi Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes on the perimeter frame of the turntable platform Low-bed Area: * Each side with 4 pairs of 10-ton lashing rings on the perimeter frame, retractable and loadable in all directions * Each side at the rear with 2 pairs of 13.4-ton swiveling lashing rings ----Ramps: * Rubber coating on the foldable drive-on ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger beams for a total width of 3 meters (not in the rear slope) * Widening planks stored on the left side in a compartment ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end of the drive-up slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4-ton lashing rings on the sides of the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (including 860 mm drive-up slope) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded: approx. 890 mm, +/- 20 mm ----Paint/Finish: * Reflective contour tape on sides and rear * Chassis, turntable, drive-on ramps, and folding beams hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain optional equipment ----Delivery Time: * Vehicle available approx. from week 23/2026

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required Ppodpsylfvgofx Aiber * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Koşul: yeni, Üretim yılı: 2026, New model, now with 9,900 kg gross vehicle weight! Ppedpfsyyhb Njx Aibor Cable drum transport trailer. Permissible gross weight: 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol, 8.1 kW, electric start) with weather protection cover, hydraulically driven drum with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centring cones for cable drums. Dual-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tyre pressure monitoring. Height-adjustable 40 mm towing eye, 2-line air, LED lighting 12+24 V. Toolbox, advertising panels integrated into the side underrun protection. Fully hot-dip galvanized vehicle. New vehicle including factory warranty. Available from approx. week 26, 2026. (Archive photos) = Further information = Unladen weight: 2,900 kg Payload: 7,000 kg Gross vehicle weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Koşul: ikinci el, azami yük ağırlığı: 19.800 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, Donanım: ABS, * Müller Mitteltal 3 dingilli konteyner taşıma römorku * Tip TM 2 24 * 7 ila 10 m³ arası iki konteyner için * Yük emniyeti her bir konteyner için yalnızca iki zincir ile sağlanır * Çift teker 265/70 R19,5 * Havalı süspansiyon Ppjdoyx R Enjpfx Aibsr * BPW dingiller * Dönel şasi çeki oku; pnömatik olarak alçaltılabilir ve pnömatik kilit açma mekanizmalıdır * Gergi elemanları takılması için 8 adet 5 ton UVV bağlama halkası * Konteynerlerin yandan merkezlenmesi için 8 adet değiştirilebilir konteyner durdurucu * EBS * Teknik olarak izin verilen toplam ağırlık 27.000 kg

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3-in-1 = suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, length 2,100 mm * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), indication available in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Toolbox made of powder-coated steel sheet, mounted right-hand side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400/450 mm, right-hand side * Rear plastic impact protection buffer * Mechanical drop-down rear supports ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with rolling recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm are possible * Pneumatic 4-point clamping lock and mechanical plug-in front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 movable skip stoppers for lateral centering of the skips, the front 4 stoppers are removable and feature pivotable stops * Weld bead as anti-slip coating in the ramp approach area Psdpfxol Thwco Aibjpr ----Load Securing: * 3 pairs of 10 t UVV rated lashing rings on the sides for attaching tensioning devices for positive and friction-locked securing of skips * 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4 t UVV rated lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Additional Information: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight of 20,000 kg * New vehicle with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3 in 1 = Suitable for hooklift containers, skip loaders, and as a low loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: Ppjdsl Thv Ropfx Aiber * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electric plug * RDÜ (Tire Pressure Monitoring) with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical rear drop supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container lengths of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical plug-in stop brackets at the front in the rail, load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing cleats in cloverleaf design (on the side) * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t per pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Information: * Load securing certificates as per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight up to 20,000 kg (technically possible) * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronisches Bremssystem) * Notlöseeinrichtung für Federspeicherzylinder * Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – keine zusätzliche LKW-seitige Installation erforderlich * Trommelbremsen * 4 x 11 t Gigant-Achsen * Luftfederung mit manueller Absenkung hinten * Warnzeichenpaket vorne & hinten Ppodsxmpydopfx Aibjr * SmartBord Infotool zur Achslastanzeige je Achsgruppe, mit Drucksensoren montiert * Reflektierendes Konturband seitlich und hinten * Abnehmbare LED-Rundumleuchte hinten * 15-poliger Stromstecker * LED-Schlussleuchten * Gerade Zugdeichsel mit 50 mm Zugöse und stufenloser Höheneinstellung * Geschlossene Kunststoff-Einzelkotflügel vorne * Gerade Stahlkotflügel hinten, jeweils mit Spritzschutz (zur Sprühnebelunterdrückung) * Seitlicher Unterfahrschutz * Vorbau vor der Drehgestellplattform ca. 520 mm, 45° Ecken, 3 Ablagefächer mit abschließbaren, nach hinten öffnenden Klappdeckeln * Fahrgestell aus hochfestem Feinkornstahl * Plattenboden über Drehgestellplattform: 50 mm Nadelholz, auf der Tiefladeplattform: 60 mm Nadelholz * Auffahrrampen: äußere Bohlen aus 50 mm Hartholz * Ladungssicherungspaket (Lasi-Paket): - 2 Zurrösen (6,4 t) vorne links und rechts auf Hauptrahmen der Drehgestellplattform - Seitlich vorne und hinten je 1 Paar Zurringe (13,4 t) am Außenrahmen - Seitlich je 1 Paar Zurringe (10 t) schwenk- und absenkbar, alle Richtungen belastbar, im Außenrahmen eingelassen - An Außenseiten der Radmulden angeschraubte Zurringe (5 t) – vorne je 2 Stück, hinten 1 Stück - Seitlich in Baggerstielablage 2 Paare Zurringe (6,4 t) * 11 Paare Klappausleger für 3 m Gesamtbreite (ausgenommen Heckschräge) * Staufach für Verbreiterungsbohlen aus Stahlblech (L = 2.470 x B = 570 x H = 250 mm), quer vor 1. Hinterachse montiert * Baggerstielablage über Hinterachse bis Ende Anfahrschräge (ca. 2.300 x 740 x 190 mm) * Seitlich je 2 Radmulden (ca. 640 mm breit; vorn 340 mm tief, hinten 220 mm tief), mit einschiebbarer Abdeckung, Ablage vorne auf der Drehgestellplattform – geeignet für Radlader-Transport mit 3.100 – 3.640 mm Radstand * Mechanische Fallstützen hinten * Hydraulische Klapprampen mit hydraulisch ausstellbarem Spitzteil (ca. 4.650 x 720 mm) * Hydraulischer Rampenverschub seitlich * Ladefläche über Drehkranz: ca. 2.990 x 2.520 mm * Hintere Ladefläche: ca. 6.780 x 2.520 mm, Ladehöhe beladen ca. 890 mm +/- 20 mm (inklusive 860 mm Anfahrschräge) * Fahrgestell, Drehgestell, Klappausleger, hintere Fallstützen und Auffahrrampen feuerverzinkt * Achsen, Luftkessel und Zugdeichsel in Schwarz lackiert * Bereifung: 235/75R17.5 * Fahrzeug ist feuerverzinkt * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Sofort verfügbar ab Egestorf

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles Ppsdpfxoxmpyko Aiber * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord info tool installed with pressure sensors for displaying total axle loads per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Closed individual plastic mudguards at the front * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Front section in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable hinged covers (opens to the rear) * Chassis made of high-strength fine-grained steel * Decking above bogie platform: 50 mm softwood; low loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm hardwood * Load securing package including: 2 lashing eyes (6.4 t) front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings left and right at the front and rear on the outer frame; 1 pair each side 10 t lashing rings foldable and lowerable, loadable in all directions and recessed in the outer frame; 5 t lashing rings bolted to the outer frame near wheel recesses (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings within the excavator boom trough * 11 pairs folding extensions for 3 m overall width (not on rear slope) * Storage box (L = 2,470 x W = 570 x H = 250 mm) for width extension planks made from sheet metal, mounted crosswise to the loading area in front of the first rear axle * Excavator boom trough above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with insertable covers (storage for inserts at the front on the bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp displacement * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding extensions, rear supports and ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: Pedpfxel Tihuo Aibjpr * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope Ppjdjxptn Depfx Aiber ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: ikinci el, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 8.650 mm, yükleme alanı genişliği: 2.480 mm, ? Mekanik rampalar ? Yükleme yüksekliği: yaklaşık 910 mm ? Stepne tutucu ? 40 mm çekme halkası Ppedpfx Aieyw Egwsbsr ? Dönerek yanıp sönen uyarı lambası ? Kampana frenler ? Yaprak yaylar ? 1 x saklama kutusu ? Çift lastik ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Koşul: ikinci el, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Podpfsxt Sl Nex Aibjpr

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2004, Üretim yılı: 2004, Donanım: ABS, - EBS Ppedpfx Aiexyx Hajbor Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, Üretim yılı: 2005, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Ppsdsxt Tf Rjpfx Aibor

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/1996, Üretim yılı: 1996, Donanım: ABS, - EBS Psdoxt Sd Eopfx Aibepr Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 8.770 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * BRAND NEW VEHICLE, no first registration * Available mid/end of May '26 in RAL 7016 Anthracite Inquiry no.: 30504 * Gross weight: 11.9 t, Payload: 8.77 t * Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate * 6.27m x 2.47m x 0.4m laser-welded steel drop sides, foldable with 2 spring balancers * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) placed in front of the ramps with a storage bracket behind the front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000daN recessed in the perforated pattern in the outer frame * Ramps: one-piece with hot-dip galvanized grating, anti-slip design * Preparation in front of the front wall for retrofitting container locks * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) Ppedpfx Aeyxbdboiber * 235/75 R17.5 (4 wheels), parabolic springs * BPW axles with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing spotlights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing through our partners, with or without down payment or balloon payment, various terms available. Request an offer! ---- * Example hire purchase with our partner FM LeasingPartner: €475/month net for 60 months, no down payment, zero balloon. Other terms with/without down payment or final payment available. Request an offer! We are an official MüllerMitteltal dealer! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of office hours available by appointment * We speak German, English, Russian, Polish, and French.

Koşul: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene) - Toplam ağırlık: 18.000kg / 20.000kg - Boş ağırlık: 4.360kg - Taşıma kapasitesi: 13.640kg / 15.640kg Diğer bilgiler - Çift lastikli 235/75R17,5 Psdpfxoyw Ep Sj Aibjpr - Gigant akslar - 4 çift yük sabitleme halkası - PNömatik kilitleme sistemi - Alçaltılabilir döner şasi - Yaklaşık 2.300mm'lik rampa, saklama bölmesinde - Arka destek ayağı - Ekipman dolabı - Alt koruma

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Towing Bar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: Pjdpfx Aijtplv Tjbepr * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide roll-off containers * Steel floor with roller recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 stops plug-in with articulated buffer ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for securing skips with tensioning elements (positive and frictional locking) * 4 cloverleaf lashing rails on the sides and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded bead anti-slip surface in the inclined ramp area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Contour tape side and rear, reflective * Axles, turntable, drawbar, and air tanks painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible gross weight: 27,000 kg * New vehicle, unregistered, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WMM000000L0066323, boş ağırlık: 2.980 kg, azami yük ağırlığı: 7.020 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, yükleme alanı uzunluğu: 5.350 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 800 mm, toplam uzunluk: 7.498 mm, toplam genişlik: 2.550 mm, lastik durumu: 95 yüzde, renk: beyaz, römork freni: frenli römork, Üretim yılı: 2021, Donanım: ABS, Yeni durumunda römork Garanti ve sorumluluk olmaksızın satış Ppjdpfx Asyt Igkjibjr Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlamalardır ve taahhüt edilmiş özellikler olarak kabul edilmez. Satıcı, yazım hataları ve veri aktarımındaki eksikliklerden sorumluluk kabul etmez. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir!

Koşul: ikinci el, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2012, bir sonraki muayene (TÜV): 04/2028, Üretim yılı: 2012, Dahili araç numarası: G300402 Psdpfexy Ul Sjx Aibjpr Alman aracı Hemen teslim, Kaufungen - Kassel, Almanya’daki tesisimizde Daha fazla bilgi: Luis Lucena Üretim yılı: 2012 Treyler boş ağırlığı: 6.530 kg Beton mikseri treyleri LIEBHERR 10 m³ Hatalar olabilir Kullanılmış aracınızı memnuniyetle takas olarak alırız. Finansman direkt olarak firmamızda mümkündür. GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- Ppjdpsv D Tbkefx Aibor * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ----Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: Ppodpfjv D Tbdex Aiber * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable; locking measure retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not a DIN standard) at a total external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm — mounted 5 x 3 t UVV-certified lashing rings per side * In the front and rear corners, 1 x 6.3 t lashing ring each (front, directly behind the container locks in the timber floor, rear in the end beam) * Multiple holes in front and rear end beams for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (10 t/pair load capacity), suitable for rubber-tyred and tracked vehicles * Rear-accessed storage compartment under the loading area, integrated into the chassis ----Paintwork: * Chassis, drawbar, front wall, underrun protection as well as rear supports galvanized * Axles, air tanks, front landing gear, and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 22/2026

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakılmış tandem platform dorse ZANDT Cargo * TAT B 110 * Platform Pjdsymuz Uspfx Aibspr * Güçlendirilmiş ahşap taban * Ağır hizmet tipi yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkün %3,99'dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Almanya genelinde teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakımlı tandem platform römork ZANDT Cargo * TAT B 110 * Platform Psdpfjymuz Iex Aibepr * Güçlendirilmiş ahşap zemin * Ağır yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkündür %3,99’dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayıp, taahhüt edilen özellikler değildir. Satıcı yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Tüm Almanya’ya teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi-Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer Ref. for inquiries: 27963, available end of March 2026 NEW VEHICLE including COC * GVW: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports * Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm * Platform height approx. 910 mm loaded / approx. 940 mm unloaded * Load area: 7,000 mm with 400 mm high front wall * Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating, * Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation * Load securing package (La-Si-Paket): * 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members * 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame * 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN * Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Softwood (spruce/fir) floor, 50 mm thick * Gigant axles with air suspension including EBS 2S/2M * Lifting and lowering function * 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors * 1 plastic toolbox positioned in driving direction right, in front of the front wall Ppodpfsyuq R Uox Aibor * LED lighting system * 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize load warning sign * 1 removable all-round LED beacon including holder and installation * Rear folding supports, front support foot with gear winch ---- Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value Other terms with/without down payment or residual value are possible! We are an authorized MüllerMitteltal dealer ---- * Our opening hours: * Mon-Thu: 08:00-17:00 * Fri: 08:00-15:00 * Outside these hours, we are available by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible