Kullanılmış Müller-Mitteltal T3 Df 30.0 | Hydr. Rampen*Verbreiterbar*Hu 01/27 satın al (12.697)

Koşul: ikinci el, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 01/2027, yükleme alanı genişliği: 2.500 mm, ? Hidrolik rampalar ? Genişletilebilir ? Her iki tarafta 8 adet yük bağlama halkası ? Stepne tutucu ? Yükleme yüksekliği: yaklaşık 930 mm ? Kampanalı fren ? Duomatic bağlantı ? Yaprak yaylı süspansiyon ? Çift tekerlekli lastik Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır. Pedpfxsytz Hwo Aibogk

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black Podpfsq Dyv Ijx Aibsgk * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at rear * Side underrun protection * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front & rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) cover for toolbox on the turntable platform * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, powder-coated black, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets per side (no stakes included), doubles as lashing points * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and retractable * Loadable in all directions, integrated in outer frame corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for overall width of 3 m (not at rear slope) * Extension planks for platform width stored in a storage compartment under loading area * Digger arm cradle above rear axle up to rear crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings per side in the cradle) * Hydraulically operated folding ramps (approx. 4,650 x 720 mm) with hydraulic movable tip and load holding valves, hydraulically adjustable ramp lateral shift Pgedpfxjtplwfo Aibok * Hydraulic flow divider in trailer (for truck hydraulic pump performance over 40 l up to max. 140 l/min), dual-circuit hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm drive-up slope) * Loaded platform height approx. 860 mm +/- 30 mm with compensation unit * Chassis, turntable, folding outriggers, drop supports at rear, and loading ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc., painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Pjdpjqpgtmofx Aibegk Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: ikinci el, boş ağırlık: 8.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Araç lokasyonu: Bovenden, 4 akslı, döner tabla, yaprak süspansiyon, 3 metreye kadar genişletilebilir, bağlama halkaları, 2 parçalı rampalar, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlek, depolama kutusu. Üst yapı: Hidrolik 2 parçalı rampa ile donatılmış 4 akslı alçak yükleyici dorse. Yükseklik yaklaşık 900 mm. 4x 10 ton SAF aks, kampanalı frenler, 40'lık ve 50'lik çeki halkası! Üst platform uzunluğu yaklaşık 2900 mm! Podsywvhrspfx Aibsgk Alt platform uzunluğu yaklaşık 7100 mm! EKİPMAN BİLGİLERİ GARANTİSİZ VERİLMİŞTİR, değişiklik, ara satış ve yazım hataları saklıdır!

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underrun protection * Rear swivel supports on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), each with additional lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame — in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear bevel) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end carrier, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the arm rest) * Hydraulically operated one-piece ramp (approx. 3,000 x 720 mm) * Hydraulic ramp lateral displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach ramp) Pgedpsx Ipbgofx Aibjk * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black finish * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permitted gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex works Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Contour marking tape on sides and rear, reflective * Folding lid (hot-dip galvanized) for tool box on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electric plug * Four stake pockets on each side (no stakes present), can also be used for lashing Pgjdpfx Aex Ipb Heibek * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame; in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear chamfer) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm storage) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable lateral ramp shift * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V Psdpfx Aijtplwijbegk * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-down supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each equipped with spray protection * Contour tape on the sides and rear, reflective * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets on each side (no stakes included) with lashing points * Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and recessed, loadable in all directions and integrated into the outer frame – 13.4 t load capacity in the corners, otherwise 10 t * Six pairs of mechanical folding outriggers for a total width of 3 m (not on the rear slope) * Extension planks stored in the center of the loading bed * Excavator boom support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Four-section control block for future retrofitting of hydraulic ramp shift Pgodpjl Thxdofx Aibsk * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 18/2026

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension Pgodpfx Aiexptn Robsk * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-actuated cylinders Pgodpfol Th Adjx Aibsk * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underride protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirting with splash guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED taillights * Detachable beacon at the rear * Towing scissors with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), also usable as lashing points * Load Securing Package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, others 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stowed in the center of the loading area * Excavator arm rest above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-section control block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, towing scissors, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 18/2026

Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli) * İlk tescil: 11/2004 * 3 aks * Havali süspansiyon * Gigant akslar * Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir * Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir Pgedpfxew Tgkbj Aibjk * Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m * Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m * Destek ayakları * Boş ağırlık: 10.260 kg * Teknik toplam ağırlık: 47.000 kg * Muayene geçerlilik: 08/2026'ya kadar * Genel muayene: 02/2026'ya kadar geçerli

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Towing Bar / Flange Towing Eye: Pgodporwc R Rsfx Aibok * Towing bar height adjustable by 300 mm * Towing bar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrical systems ----General Attachments: * Landing gear at the front * Fold-out rear support legs externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofit container lock fittings * 400 mm screwed flat steel front wall * Bolt-on stanchions at the rear * Drop sides with spring assistors ----Load Securing: * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various drilled holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis Pgsdpfx Ajl Tlhroibsk * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front landing gear (support winch) * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Pre-installation in front of the bulkhead for retrofitting container locks * 400 mm bolted smooth sheet steel bulkhead * Bolt-on rear stanchions * Sideboards with spring-assisted lifting ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings at 600 mm intervals * One 6.3 t lashing ring in each corner front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail along the central longitudinal axis for lashing up to LC 3000 daN ----Ramps: * Single-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible down to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 litres/min up to max. 140 litres/min) ----Paintwork: Pjdpfx Aiorwc R Asbjgk * Chassis, drawbar, bulkhead, mechanical folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 16/2026

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners Pjdpfsl Tnu Ajx Aibegk * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour marking tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connector lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed single mudguard at the front (plastic) * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm forwards * Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable * Chassis made of high-strength fine-grained steel * Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored sideways left in storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved Pgjdpsrczm Defx Aibek * Available from week 21 / 2026

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring system with cab display option via EBS signal – no installation required on the truck side * Warning sign package front & rear * Reflective contour tape, side and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additional 12 V – 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side Pjdol Th Evepfx Aibsgk * Closed single plastic mudguard front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Extended offset by 500 mm to the front * Extended turntable platform at the front by 520 mm with 45° corners and three recessed storage compartments incl. lid, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, low-bed platform floor made of 60 mm softwood * Outer planks of ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes supplied), each with 2 t lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; one pair of 13.4 t lashing rings at the front and rear outer frames; four pairs of 10 t swivel and retractable lashing rings per side, loadable in all directions and integrated into the outer frame; two pairs of 6.4 t lashing rings on the side in the excavator stick rest; eight pairs of galvanized folding outriggers for 3 m overall width (not on rear incline) * Widening planks stored left side in storage compartment * Excavator stick rest over rear axle to end of rear incline, approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized ramps, approx. 3,000 x 720 mm * Hydraulic side ramp displacement on guide tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Laden loading height approx. 860 mm (incl. 860 mm rear incline) * Chassis, turntable, ramps, and rear mechanical support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 21 / 2026

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Landing gear at front * Mechanical drop-down jacks at rear * Fixed welded drawbar with low-maintenance K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate), with raised bracket for connecting lines * 12 V, 7 + 4 pin electrical connection * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, operable from the towing vehicle without need for vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, side-mounted on the right * Chassis made of fine-grain steel * Steel three-way tipper body with M-Strong drop sides (fixed front panel, continuous side panels without intermediate stanchions, pendulum-mounted via manual central locking and mechanically foldable with drop side spring assist) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute, 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner (recessed and foldable), 4 x 3 t on each side * Two-step hot-dip galvanized access ladder at the front left Pjdpsr Dpzusfx Aibogk * 1 pair aluminum loading ramps (10 t/pair, axle spacing > 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 sockets for aluminum loading ramps, rear-mounted in chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm * Superstructure paintwork in RAL 9010 pure white * Chassis, drawbar, rear drop-down jacks, underride guard hot-dip galvanized * Axles, air tanks, front landing gear * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h Pjdpsr Dpz Hofx Aibjgk * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalization system with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed, welded-in drawbar with a low-maintenance K80 ball hitch (adjustable by +77 mm / 33 mm via head plate), with raised bracket for connection lines * 12 V 7 + 4 pin electrical wiring * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel pallet 3-way tipping body with M-Strong side walls (fixed front wall, continuous side walls - without central stanchions - swinging on mechanical central locking and mechanically foldable with drop-side spring lift) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner, plus 4 x 3 t each side, recessed and foldable * Hot-dip galvanized 2-step access in front of the front wall (on driver’s side left) * 1 pair aluminum loading ramps (10 t / pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 ramp storage compartments at the rear, integrated into chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm, unloaded approx. 590 mm * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports and underride protection all hot-dip galvanized * Axles, air tanks, front support winch * K80 hitch painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, Üretim yılı: 2016, T3 Profile 30, 0: Drum brakes, 3 x 10 ton axles, side underrun protection, swiveling support legs at the rear of the chassis frame, mechanically adjustable warning sign packages at the front and rear, folding lid for the toolbox on the turntable platform, 4 lashing rings on each side, 6 pairs of mechanical folding extensions for a total width of 3 m, widening planks stored in the center of the loading area, hydraulically operated 2-piece loading ramps laterally adjustable, loading area above the turntable: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm; rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm approach ramp), permissible gross weight technically possible: 30,000 kg, vehicle is hot-dip galvanized and as new. = Additional Information = Weights Payload: 24,000 kg Pgodpsyz Ix Rsfx Aibek gross vehicle weight: 6,000 kg Maintenance, History, and Condition Number of owners: 1 Technical condition: very good Visual condition: very good Further Information Tyre condition front: 90% Tyre condition rear: 90% Tyres front: 235/75 R 17.5 Tyres rear: 235/75 R 17.5 Cargo space dimensions (LxWxH): 8500 x 3000 x 3000 Country of manufacture: DE Further Information Please contact Bernd Strack for more information.

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Front bulkhead and rear slope pre-equipped for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing legs at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * Version for 21 t gross weight with reinforced frame and axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Bulkhead pre-equipped for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls made from trapezoidal-profiled steel sheet, foldable with central folding stanchion Pgodpoq Dyu Uefx Aibok * Steel rear wall, can be inserted between the ramps – holder for non-use installed inside at the bulkhead * Rear stanchions bolted * Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing brackets every 600 mm possible * Profifix lashing rail in the center longitudinal axis for lashing capacity up to LC 3000 daN * One 10 t lashing ring in each front and rear corner * Load securing package with two 8 t retractable lashing rings each side, various holes for 1.2 t lashing options in bulkhead and rear crossmember * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be nested down to 20 mm) * Rear drive-on slope approx. 860 mm at the chassis * Drawbar, bulkhead, rear flap, folding supports, and ramps galvanized * Axles, springs, air tanks, and landing legs painted in black * Loading height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paintwork in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes Pgsdpfxel Th I Ao Aibok * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty Pgsdpel Th Nnsfx Aibek * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: ikinci el, boş ağırlık: 3.145 kg, azami yük ağırlığı: 14.855 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2011, bir sonraki muayene (TÜV): 01/2027, süspansiyon: hava, lastik boyutu: 235/75R17,5, azami hız: 190 km/s, ALMAN BAYİ sunar: BDF değiştirilebilir şasi GALVANİZLİ 235/75R17,5 Çift lastikli uzun körükler İlk tescil 11/2011 Muayene 01/2027’ye kadar Azami toplam ağırlık 18.000 kg Podey Htftjpfx Aibjgk Boş ağırlık 3.145 kg tambur frenli Lafetteler ve değiştirilebilir kasalar stokta çok sayıda mevcut! ##### LÜTFEN ARAYINIZ – E-POSTA YOK! ##### ALMANYA GENELİNDE TESLİMAT MÜMKÜNDÜR! MEPO-TİCARİ ARAÇLAR 1983’TEN BERİ TESLİMAT YAPIYOR! SADECE RANDEVU İLE GÖRÜLEBİLİR! #####