Kullanılmış Faymonville 6-Achs Giga 2+4 Tiefbett Stbz-6Wa Tieflader satın al (62.875)

Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Iedowcmhaspfx Aitoic Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Durum: ikinci el, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2025, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6x4 or 8x4 2-Axle Front Bogie: - Hook coupling front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and with pin-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance of 150 mm 4-Axle Rear Bogie: - Mechanical pin-eye coupling for attaching a low bed at the front, end cross-member at rear - Chassis length x chassis width approx. 5,480 mm x 2,850 mm Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and quick connector to secure in the raised position - Axles top-coated with 2 layers of 2-component paint in single color MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle levelling - Tyres 285/70 R19.5 Remote Steering: - Remote steering from the front and rear via cable remote control with pushbuttons, with single-track control of the axles - Socket for operating the remote steering on the gooseneck - Cable remote control with pushbuttons, includes single-track control of axles Accessories included: - Galvanized connection strip at the front with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right rear on the gooseneck for warning board - Spare wheel hoist with winch at the front side of the gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including hanger for supply lines; tractor unit tank must be at least 80 liters and come with coupling fittings - Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and in area of lowbed hook coupling - 2 spare wheels - Front bogie with separate air connection for air tools - Foldable steel loading width extensions, adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel inserts are placeable in 2 positions for a lowered loading area - Steel inserts with rubber flooring approx. 12 mm thick Ijdozauvrjpfx Aiteic - Option to screw in rings (⌀ 40 mm) every approx. 500 mm on the outer upper flange of the excavator deck for lashing rings - 2 INOX toolboxes approx. 855 x 340 x 390 mm left and right on the gooseneck - Radio remote control for rear steering in addition to cable remote - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery - Steel inserts adjustable from 2,850 mm to 3,250 mm wide and insertable in 2 positions for a lowered loading area - 4 pairs of steel inserts with rubber flooring approx. 12 mm thick - Maximum 3,500 mm telescopic tube coverable, in 500 mm increments - Central beam of the lowbed provided with a painted sand covering as anti-slip protection - Extensive lashing points

Durum: iyi (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 12.500 kg, izin verilen dingil yükü (dingil 2): 12.500 kg, ilk tescil: 09/1996, yükleme alanı uzunluğu: 20.400 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 15.400 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 400 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 1996, Donanım: ABS, = Diğer seçenekler ve donanım = - 2 aks - Hidrolik - Havalı süspansiyon - Yönlendirilebilir aks - Kampanalı frenler - Merkezî yağlama sistemi = Notlar = Uzaktan kumandalı 2 hidrolik kontrollü aks 5 m'ye kadar uzatılabilir Merkezî yağlama sistemi = İlave bilgiler = Aks konfigürasyonu Lastik ölçüsü: 235/70 R17.5 Lastik diş derinliği: %75 Arka aks 1: Çift lastik; Maks. aks yükü: 12.500 kg; Yönlendirilebilir Arka aks 2: Çift lastik; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Frenler: Kampanalı frenler Ağırlıklar Ijdpfx Aiezcm E Djtjic Boş ağırlık: 12.920 kg Yük kapasitesi: 34.580 kg yGVM (azami toplam ağırlık): 47.500 kg Fonksiyonellik Yükleme alanı yüksekliği: 40 cm Durum Teknik durumu: iyi Görsel durumu: iyi Kimlik Plaka: QLE569

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir * Takip kontroll aksı * Hidrolik yükleme rampaları * Havalı süspansiyon Iiodpfx Aox I Uyhoitjc -----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Durum: ikinci el, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2021, toplam genişlik: 3.000 mm, toplam yükseklik: 3.760 mm, Donanım: ABS, * Own hydraulic unit * Hydraulically movable loading ramps * 4 hydraulic auxiliary supports * Hydraulically extendable low-bed (3000 mm) * Extendable loading platform (500 mm) * AXION radio system with remote control * Gooseneck with side walls & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E * SAF axles with drum brakes * Wabco SmartBoard unit * Height-adjustable low-bed * Reversing camera * Telematics ----The following work was carried out by ES-GE Nutzfahrzeuge in February: * Brake drums, brake shoes & linings, brake cams, bushings & slack adjusters renewed on all 4 axles * Tie rod ends replaced * Suspension of the steering knuckles on TwinAxle II replaced * Electrical lighting system serviced * Hydraulic accumulator replaced * EBS repaired * Electric pump checked * High-pressure oil and filter replaced * Checked axle play * Central lubrication system checked * Suspension levers serviced * Sensors for height adjustment serviced * Distribution box at the front serviced * Wooden floor repaired * Protective covers repaired * Air reservoir newly fastened * Wheel bearings checked ----* Tire size: 245/70R17.5 * Gross vehicle weight: 73,000 kg * Unladen weight: 14,600 kg * Total length: 13,200 - 16,200 mm * Total width: 2,540 - 3,000 mm * Mileage: 194,000 km * Next SP inspection due: 09.2026 ----Vehicle number: 12154----Subject to errors and prior sale----Advertising and various lettering digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Iisdpfjzbw N Rex Aitec Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- YOUR VTS TEAM

Durum: yeni, azami yük ağırlığı: 98.290 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * MAX810-Neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulic gooseneck, lift/lower and detachable. Length approx. 3,650 mm * Truck hydraulic connection with flow regulator (20 l/min), * incl. hanging bracket for the supply lines; tractor unit tank must hold at least 80 l, equipped with MAX Trailer couplings; otherwise, couplings to be supplied free issue by the customer. Iisdpfxszbfuho Aitsc * For tractor unit: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-eye coupling at the front and rear chamfer of approx. 500 mm x 8°. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling pin. PENDLE AXLE 2-AXLE FRONT CHASSIS PENDLE-AXLE * All axles hydro-mechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-eye coupling front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX centralized lubrication for 2-axle chassis with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDLE AXLE 6-AXLE LOADING PLATFORM PENDLE-AXLE * All axles hydro-mechanically forced steered. * Hose rupture valve on axle equalizing cylinder with automatic RESET function. * Hydraulic cylinders with shut-off valves and pre-insert to secure in raised position. * Technical axle load: each 13,740 kg (30 km/h) * Hydraulic axle equalization. TYRES * 24 x brand at our discretion (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Final coating of axles * Painted in DB7350 Novagrau, solid color, with 2 layers of 2-component paint. * PAINTWORK Complete steel construction sandblasted automatically by shot blast machine after welding. * Second blasting with corundum for optimal adhesion of the coating system. * HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to guarantee optimal corrosion protection. * PAINTWORK Trailer in carmine red (RAL 3002) Including the following accessories * Bracket with winch for spare wheel at the front of the gooseneck. * 3.5-inch kingpin * Steel front wall approx. 400 mm high. * Plug-in aluminium drop sides and rear wall, approx. 400 mm high, anodized finish, for gooseneck. * Operating lever on the gooseneck protected by a foldable cover. * Illuminated operating controls on the gooseneck with on/off switch. * One 7-pole socket left and right rear of the gooseneck for warning board. * Load gauge on the gooseneck to determine axle load at front and rear chassis * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2. * Hydraulic connections from gooseneck to lowbed with threaded couplings. * Access possibility to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm Emission stage: EU Stage V Max. hydraulic pressure: 280 bar Max. flow: 21 l/min Assembly on the gooseneck. * Hydraulic oil tank 100 L frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between power pack and connector plate on the gooseneck. * Radio remote control: * Control of power pack, start/sto

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, Üretim yılı: 2022, Faymonville 2-axle low bed trailer MEGAMAX 2x12 t PA 2 steered axles Single telescopic, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technical extension (telescopic): approx. 4,700 mm Fifth wheel height (laden): approx. 1,205 mm Loading height (max. laden): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm Fifth wheel offset: approx. 1,200 mm Swing clearance radius tractor unit (rear): approx. 2,300 mm Swing clearance radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - SNT-designed gooseneck for optimized loading area length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 25,000 kg Iisdey Hxd Iepfx Aitjc Bridge: - Extra-low 'SUPER LOW' design as an extendable vessel bridge - Length approx. 6,850 mm, with mechanical locking Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at rear - PENDLE-AXLE, all axles hydro-mechanically forced steered - Hose rupture valve on axle compensation cylinder with automated RESET function - Hydraulic cylinder with shut-off cocks and safety plugs for securing in raised position - Technical axle load: 12,000 kg each - Hydraulic axle compensation Brake system: - WABCO braking system, EBS-E in accordance with regulations Chassis tyres: - 245/70 R 17.5 3PMS Metallisation: - Complete HRM metallisation (High Resistance Metallisation) - Complete steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Coating: - 6-coat finish - Complete steel construction shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final painting with 2 layers of 2-pack paint (acrylic), single colour, then cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver grey - Drop side colour: Natural aluminium Steel construction: - Steel construction made from high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690Q/S700MC (yield strength 690 MPa) - MAG welding process according to EN ISO 4063

Durum: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of foldable lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact front chassis: * Hook mounting front and rear, length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear chassis: * Mechanical bolt-eye coupling for mounting a low bed at the front * Rear end cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: * 8 x (M+S) 285/70 R19.5 as per manufacturer specification * Rear chassis tyres: * 16 x (M+S) 285/70 R19.5 as per manufacturer specification * Load index 150/148J Paintwork: * Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL Iiedpfexbmplox Aitoc Including the following accessories: * Steel front wall, approx. 400 mm high * Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch king pin * Truck hydraulic connection with flow control (20 l/min) * Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works * BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-connection hydraulic couplers on the gooseneck * Front chassis with separate air connection for pneumatic tools * BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right at the rear of the front chassis for warning panels * Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2 * Socket on the rear chassis for the cable remote control of the rear steering * Rear chassis with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right * 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery * Remote control: * Operation of the powerpack, engine start/stop * Operation of the rear steering, in addition to the cable remot

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm Ijdpfx Aiszahp Sstsic * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm Gooseneck rear with bevel approx. 1,000 mm x 10° Loading Area: Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10° Recess in the incline and extending into the loading area for accommodating the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected within the extendable beam and adjust to the respective loading area length Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards Axles and Suspension: BPW axles and suspension, two fixed axles, two steering trailing axles Electromagnetic reverse lock activated via reverse gear and manually Air suspension with lifting and lowering valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Ijdjk Ahugopfx Aiteic Load index: 143/141J (144/144F) Brake System: WABCO brake system, EBS-E according to EU regulations Lighting System: 24-volt lighting system, “ASPÖCK-NORDIK full LED” Metallization: Standard HRM metallization of the external frame Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished Steel Structure: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified according to DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Included accessories: Removable steel front wall, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 Round NATO socket on the front connection strip Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches) 1 spare wheel with mounting adapter External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring 1 pair screw-in lashing rings Approx. 40 mm thick hardwood floor above gooseneck On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized 2" king pin Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 4 wheel chocks with holders Provision for aluminium approach ramps Mechanical landing gears with 2-speed gearbox and crank On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate Slotted holes at the front of the loading area for attachable and repositionable bridging plates 1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering Front and rear with longe...

Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward Iijdpfx Ashlz R Sjitjc - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 25,000 kg - Suitable for tractor units: 4x2, 6x2, and 6x4 Load bed: - Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tires: - "PENDULUM AXLE", all axles hydro-mechanically steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position - Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS pressure sensors mounted in all wheels, including spares Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - One spare wheel with mounting adapter - Gooseneck outer beams with mounting holes for bolt-on lashing rings - Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck - One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck - Chequer plate cover over the gooseneck - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Gooseneck operation lighting with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip sticker on the left chamfer of the gooseneck - Gooseneck closed at the rear upper area with a removable cover - 4 chocks with holders - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed - The ramps can be placed above or between the hooks - Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck Ijdpovy Edcofx Aiteic - Prepared for bolt-on container supports for 1x20ft on the outer beams - Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrated sand coating as anti-slip protection - Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps - 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Remote control (radio and cable) - 4 extensible warning signs approx. 423 mm x 423 mm - Extensive lashing positions

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.750 mm, süspansiyon: hava, Üretim yılı: 2012, Ek bilgiler: Marka: FAYMONVILLE Model: STBZ-4VA + dolly D-2 Yapı: alçak şasi (alçak platform L=8143-13173 mm / G=2750 mm / Y=510 mm) Yıl: 07.2012 Süspansiyon: havalı süspansiyon Frenler: kampana fren Ölçüler: U/G: 17800 mm / 2750 mm Ağırlıklar: azami/boş: 80000 kg / 22250 kg (dolly hariç) UZATABİLİR / TÜM AKSLAR DİREKSİYONLU Model yılı: 2012 Süspansiyon tipi: hava Frenler: kampana Direksiyon: yönlendirmeli = Daha fazla bilgi = Iedpfsy Nlc Asx Aitoic Süspansiyon: havalı süspansiyon Orta aks 1: Yönlendirmeli Orta aks 2: Yönlendirmeli Arka aks: Yönlendirmeli Boş ağırlık: 22.250 kg Taşıma kapasitesi: 57.750 kg Azami yüklü ağırlık (GVW): 80.000 kg Daha fazla bilgi için lütfen Mark Ševtšenko, Deniss Urmaker, Alejandro Goyeneche veya Hesham Haddad ile iletişime geçiniz.

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2012, Faymonville STBZ-4VA Baujahr: 2012 10-t-SAF-Achsen Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik des Aufliegers funktioniert mit NATO-Elektrik Hydraulisch abnehmbarer Schwanenhals 5 Meter ausziehbar 2 x Reserverad Verzinkt! Luftfederung Baggerbrücke: 5600 x 950 mm Kabelfernbedienung Abmessungen: Schwanenhals: Länge: 4.500 mm Breite: 2.550 mm Höhe: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: Länge: 7.550 mm Breite: 2.750 mm Höhe: 530 mm Bodenstärke: 350 mm Heck des Aufliegers: Länge: 5.600 mm Breite: 2.750 mm Höhe: 1.000 mm Reifen: 235/75R17,5 80% Dolly D-2 Baujahr: 2012 10-t-SAF-Achsen Leergewicht: 4.300 kg zGG: 38.000 kg Sattellast: 18.000 kg Luftfederung Reifen: 235/75R17,5 70% Deutscher Auflieger! ID NR: 629 Für alle Inserate, Angebote und Offerten von Heinhuis, für sämtliche von Heinhuis eingegangenen Verträge sowie die ihnen vorausgehenden Verhandlungen gelten ausschließlich die Allgemeinen Geschäftsbedingungen von Heinhuis. Mit jeglicher Antwort erkennen Sie die Geltung der AGB von Heinhuis an und bestätigen, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp: Iiedpfjy I Auyox Aitec

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2011, Faymonville STBZ-4VA. Baujahr: 2011 10-Tonnen-SAF-Achsen Leergewicht: 22.500 kg Zuladung: 57.500 kg Maximales Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik vom Auflieger funktioniert mit NATO-Elektrik Hydraulisch abnehmbarer Schwanenhals Um 5 Meter ausziehbar 2 x Reserverad Verzinkt! Luftfederung Baggerbrücke: 5.600 x 950 mm Fernbedienung mit Kabel Abmessungen: Schwanenhals: L: 4.500 mm B: 2.550 mm H: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: L: 7.550 mm B: 2.750 mm H: 530 mm Bodenstärke: 350 mm Heck Auflieger: L: 5.600 mm B: 2.750 mm H: 1.000 mm Bereifung: 235/75R17,5, Profil 70% Dolly D-2 Baujahr: 2012 10-Tonnen-SAF-Achsen Leergewicht: 4.300 kg Iiodpfx Aiozbkpdjtec Maximales Gesamtgewicht: 38.000 kg Sattellast: 18.000 kg Luftfederung Bereifung: 235/75R17,5, Profil 70% Deutscher Auflieger! ID-Nr.: 624 Es gelten die Allgemeinen Geschäftsbedingungen (AGB) der Heinhuis für sämtliche Inserate, Angebote und Kostenvoranschläge von Heinhuis, sämtliche mit Heinhuis geschlossenen Vereinbarungen sowie die diesen vorausgehenden Verhandlungen. Mit jeder Art der Reaktion akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind reine Export-Netto-Preise. = Weitere Informationen = Baujahr: 2011 Leergewicht: 22.500 kg Zuladung: 57.500 kg zulässiges Gesamtgewicht: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2012, Faymonville STBZ-4VA. Baujahr: 2012. 10-Tonnen SAF-Achsen. Leergewicht: 22.500 kg. Nutzlast: 57.500 kg. Maximales Gesamtgewicht: 80.000 kg. Sattellast: 40.000 kg. EBS, ABS, ALB. Hydraulik des Aufliegers funktioniert mit NATO-Stromversorgung. Hydraulisch abnehmbarer Schwanenhals. 5 m ausziehbar. 2 x Reserverad. Verzinkt! Luftfederung. Baggerbrücke: 5600 x 950 mm. Fernbedienung mit Kabel. Abmessungen: Schwanenhals: L: 4.500 mm B: 2.550 mm H: 1.750 mm Sattelkupplungshöhe: 1.250 mm Ladefläche: L: 7.550 mm B: 2.750 mm H: 530 mm Bodenstärke: 350 mm Heck Auflieger: L: 5.600 mm B: 2.750 mm H: 1.000 mm Bereifung: 235/75R17,5 80% Dolly D-2. Baujahr: 2012. 10-Tonnen SAF-Achsen. Leergewicht: 4.300 kg. Max. Gewicht: 38.000 kg. Sattellast: 18.000 kg. Luftfederung. Bereifung: 235/75R17,5 70% Iisdjzbkg Nopfx Aitec Deutscher Auflieger! ID Nr.: 589. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, alle von Heinhuis abgeschlossenen Vereinbarungen und die ihnen vorausgehenden Verhandlungen. Mit jeglicher Form der Rückmeldung akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie davon Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zulässiges Gesamtgewicht: 80.000 kg ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2012, Faymonville STBZ-4VA. Baujahr: 2012. SAF-Achsen, 10 Tonnen. Eigengewicht: 22.500 kg. Nutzlast: 57.500 kg. Gesamtgewicht: 80.000 kg. Sattellast: 40.000 kg. EBS, ABS, ALB. Hydraulikversorgung des Aufliegers über NATO-Elektrik. Hydraulisch abnehmbarer Schwanenhals. 5 Meter ausziehbar. 2 x Reserverad. Verzinkt! Luftfederung. Baggerbrücke: 5600 x 950 mm. Kabelgebundene Fernbedienung. Abmessungen: Schwanenhals: Iijdpfxjzbkgvj Aitec L: 4.500 mm B: 2.550 mm H: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: L: 7.550 mm B: 2.750 mm H: 530 mm Bodenstärke: 350 mm Heck des Anhängers: L: 5.600 mm B: 2.750 mm H: 1.000 mm Bereifung: 235/75R17,5, 70% Dolly D-2. Baujahr: 2012. SAF-Achsen, 10 Tonnen. Eigengewicht: 4.300 kg. Gesamtgewicht: 38.000 kg. Sattellast: 18.000 kg. Luftfederung. Bereifung: 235/75R17,5, 70% Deutscher Auflieger! ID-Nr.: 588. Die Allgemeinen Geschäftsbedingungen (AGB) der Firma Heinhuis gelten für alle Inserate, Angebote und Offerten von Heinhuis, alle abgeschlossenen Vereinbarungen sowie für bereits vorangehende Verhandlungen. Mit jeder Art von Reaktion erkennen Sie die Gültigkeit unserer AGB an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettoexportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zulässiges Gesamtgewicht: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durum: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length Iiedpfx Asrgzv Njitsc * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Durum: ikinci el, makine/araç numarası: YAFTL410000011078, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2010, toplam uzunluk: 18.200 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.550 mm, süspansiyon: hava, renk: diğer, Üretim yılı: 2010, Special Transport Length over axles: 560 cm Loading area length: 750 cm Gooseneck length: 500 cm Low loader: ✓ Maximum width: 313 cm Extendable: ✓ Telescopic: ✓ = Further Information = Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% First middle axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Rear axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Gross vehicle weight: 80,000 kg Registration number: Y0101796 Iodpfx Ajwid Dlsitsic = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: yeni, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, hava yükseltilip indirilebilen hava süspansiyonlu, aks yükü terazisi, toplam yükleme platformu uzunluğu yaklaşık 9.100 mm, düşük yatak yaklaşık 6.900 mm uzunluğunda, yüklü yükseklik yaklaşık 890 mm, 24 x her biri 10 t olan sabitleme halkası, dış çerçevede 12 x kazık yuvası, rampa ve arka eğimde dışta tırmanma şeridi, 2 parçalı sürüş rampası (yaklaşık 4.300 x 750 mm), rampalar yandan ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya germe kayışı için kapaklı saklama kutusu, yönetmeliğe uygun kontur işaretlemesi, döner tepe lambası, yay kuvvetli park freni, aks yükü göstergeleri dahil, araç daldırma galvanizli, ilave ücret karşılığında: hidrolik rampa kaydırması = Fiyat: 1.000 €. Yazım hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller. Daha fazla bilgi için: !, More Details: ! Iedpfx Ajzdz Ibjitoic

Durum: ikinci el, azami yük ağırlığı: 69.800 kg, toplam ağırlık: 97.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2014, yükleme alanı uzunluğu: 19.800 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.900 mm, Donanım: ABS, Special low loader for long and heavy haulage, the lowbed offers a loading area of approx. 7,700 mm, plus 5,300 mm extendable. The lowbed can be rotated to form a platform (length 15,305 mm – extendable up to 20,605 mm). The loading height as a lowbed is approx. 420 mm, and as a platform approx. 800/900 mm. The lowbed can be widened up to 3,200 mm. Axles: DOLL Panther technology, double wishbone suspension with hydraulic springing, per axle 12,000 kg, fifth-wheel load 25,000 kg, designed for payloads up to approx. 80,000 kg (only at reduced speed). Dimensions without front DOLLY axles: Length approx. 17,350 + 5,300 mm extendable, unladen weight approx. 21,600 kg, payload up to approx. 69,650 kg (at reduced speed only). Current new price approx. €460,000 net. Iiedpfeyad Rljx Aitoc SI85047 Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! The vehicle may be covered or labelled with advertising. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Please contact us!

Durum: ikinci el, azami yük ağırlığı: 84.000 kg, toplam ağırlık: 105.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2000, Donanım: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 HYDRAULIC SUSPENSION – Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg – Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg Roadworthiness certificate (RO HU) due Gooseneck length: 3,900 mm Ijdpfxox Txllo Aitsic Coupling height: 1,350 – 1,450 mm Low bed: Length: 13,550 mm (including 600 mm chamfered) – Width: 3,000 mm – Loading height: 920 mm TELESCOPIC (with sliding table – 500 mm) Hanging rails Technical axle loads: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTING AXLE Axles 2,3,4,5,6 = FORCED STEERING Tyres: 9.5 R 17.5 Modifications, prior sale, and errors are expressly reserved. The description serves for general identification purposes only and does not constitute a warranty as defined by sales law. The condition and scope of delivery are determined exclusively by the purchase contract. Our offer generally excludes new TÜV certification. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. The vehicle may bear advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, azami yük ağırlığı: 19.080 kg, toplam ağırlık: 28.480 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2025, bir sonraki muayene (TÜV): 08/2026, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! BPW 10 ton akslar, 2 akslı yönlendirme, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, hidrolik 1400x700 + manuel 700. Iisdpfxsykgkco Aitoc

Durum: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck Iiodpfjxrx Nlsx Aitoc 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Durum: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500kg Boş ağırlık: 12.060kg Yük kapasitesi: 34.440kg Toplam uzunluk: 13.550mm - 26.550mm Genişlik: 2.550mm Diğer Bilgiler - 3 aks hidrolik zorunlu yönlendirmeli - Üstsadel yönlendirme kıskacı - Rampa askı rayı - Yükleme alanı için takma çıtalar - 2 kat teleskopik, 26.550 mm’ye kadar uzatılabilir Iiedpfxeycpbnj Aitoc - Kuğu boynu üzerinde alet kutusu - E-Tekerlek - Elektrik ön hazırlığı - Hidrolik art yönlendirme fonksiyonu, elektronik uzaktan kumanda - Geniş bağlama paketi - Kendi hidrolik pompa ünitesi Diğer yeni ve ikinci el havuzlu yarı römorklar mevcuttur. Daha fazla bilgi için