Kullanılmış Faymonville 6-Achs-Tele-Semi Mit Pa-X Achssystem satın al (56.733)

Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Hjdpfx Ajk Af Svshhep Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durum: yeni, azami yük ağırlığı: 98.290 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * MAX810-Neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulic gooseneck, lift/lower and detachable. Length approx. 3,650 mm * Truck hydraulic connection with flow regulator (20 l/min), * incl. hanging bracket for the supply lines; tractor unit tank must hold at least 80 l, equipped with MAX Trailer couplings; otherwise, couplings to be supplied free issue by the customer. * For tractor unit: 6 x 4 or 8 x 4 Loading Platform Hsdpfozbfuhex Ahhop MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-eye coupling at the front and rear chamfer of approx. 500 mm x 8°. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling pin. PENDLE AXLE 2-AXLE FRONT CHASSIS PENDLE-AXLE * All axles hydro-mechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-eye coupling front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX centralized lubrication for 2-axle chassis with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDLE AXLE 6-AXLE LOADING PLATFORM PENDLE-AXLE * All axles hydro-mechanically forced steered. * Hose rupture valve on axle equalizing cylinder with automatic RESET function. * Hydraulic cylinders with shut-off valves and pre-insert to secure in raised position. * Technical axle load: each 13,740 kg (30 km/h) * Hydraulic axle equalization. TYRES * 24 x brand at our discretion (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Final coating of axles * Painted in DB7350 Novagrau, solid color, with 2 layers of 2-component paint. * PAINTWORK Complete steel construction sandblasted automatically by shot blast machine after welding. * Second blasting with corundum for optimal adhesion of the coating system. * HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to guarantee optimal corrosion protection. * PAINTWORK Trailer in carmine red (RAL 3002) Including the following accessories * Bracket with winch for spare wheel at the front of the gooseneck. * 3.5-inch kingpin * Steel front wall approx. 400 mm high. * Plug-in aluminium drop sides and rear wall, approx. 400 mm high, anodized finish, for gooseneck. * Operating lever on the gooseneck protected by a foldable cover. * Illuminated operating controls on the gooseneck with on/off switch. * One 7-pole socket left and right rear of the gooseneck for warning board. * Load gauge on the gooseneck to determine axle load at front and rear chassis * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2. * Hydraulic connections from gooseneck to lowbed with threaded couplings. * Access possibility to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm Emission stage: EU Stage V Max. hydraulic pressure: 280 bar Max. flow: 21 l/min Assembly on the gooseneck. * Hydraulic oil tank 100 L frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between power pack and connector plate on the gooseneck. * Radio remote control: * Control of power pack, start/sto

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Hjdpol Sl Izjfx Ahhsp Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Hsdel Uxdkepfx Ahhep Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels Hsdpfszahp Sox Ahhop * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high Hsdpshlz S Njfx Ahhjp • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve Hsdpfjup U Hzex Ahhsp - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Loading platform in extendable design with rear taper approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - c. 48 mm thick hardwood flooring, over the axles with checker plate covering Detachable Two-Part Ramps: - One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function - The trailing steering axles can be locked electromagnetically via reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system according to EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made of high-tensile fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat finish in single-colour Novagrau Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets Accessories Included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings at the galvanized front terminal strip - 4 chocks with holder at the front wall - Mounting at the rear area of the gooseneck for ALU drive-on ramps - Galvanized folding supports under the taper of the loading platform - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading platform - White reflector tape to EU specification on the sides, red at rear and on extension - Electro-hydraulic power pack - On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet - Ramp control valves installed on the right trailer side Hedpfx Ajh Etf Rohhop - One mudguard at the rear of the trailer - Instruction manual and description on USB stick - ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm - The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Extensions, galvanized, extendable by approx. 230 mm per side - Lift axle on the front axle with control - Square climbing rails 20 x 20 mm - Central lubrication system BEKAMAX - F

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Hodpetphtmefx Ahhop Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer Hedpot Ag Uwofx Ahhop - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high Hodeuqlmnepfx Ahhep - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of outwards folding lashing rings • 1 pair of flat lashing rings at the front of the loading platform • Cut-outs in the outer frame for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate covering above axles Landing gear: • JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles • Technical axle load: 12,000 kg • 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Braking system: • WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M) Paintwork: • First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single colour MB 7350 Novagrau • Rear section metallised and painted RAL 9010 (pure white) Steel construction: • Fabricated from high-tensile fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Equipment: • One spare wheel with holder in front of the bulkhead • 2" kingpin • Galvanised steel front bulkhead approx. 400 mm high • Yellow-red air couplings on galvanised connection strip at the front • 2 wheel chocks with holder mounted to the bulkhead • Provision at rear of gooseneck for ALU loading ramps • Galvanised extendable deck wideners, approx. 230 mm per side • Bracket for beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflective tape to EU regulations on sides, extension; red at the rear • Mounting hardware for warning signs with socket at gooseneck and rear, left and right • Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame • Lift axle on front axle with TEBS E control, responsive to axle load and load status • Adjustable mounting rails for ALU loading ramps at rear • 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel • BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection • 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm • Mounting for beacon on warning signs Hedpsma Hf Rofx Ahhep • European reflective plates (red-yellow) at rear of trailer • 80 km/h speed stickers on rear and both sides • Load gauge to determine axle loads including load diagram • HRM Metallisation (High Resistance Metallisation) of outer frame • Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation

Durum: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: Hjdpjiu Er Aofx Ahhep - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: Hjdoxnnk Djpfx Ahhjp - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durum: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Hodpsywv Ixsfx Ahhep Optional: The trailer is available with aluminum approach ramps.

Durum: ikinci el, azami yük ağırlığı: 84.000 kg, toplam ağırlık: 105.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2000, Donanım: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 Hodex Txllspfx Ahhop HYDRAULIC SUSPENSION – Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg – Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg Roadworthiness certificate (RO HU) due Gooseneck length: 3,900 mm Coupling height: 1,350 – 1,450 mm Low bed: Length: 13,550 mm (including 600 mm chamfered) – Width: 3,000 mm – Loading height: 920 mm TELESCOPIC (with sliding table – 500 mm) Hanging rails Technical axle loads: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTING AXLE Axles 2,3,4,5,6 = FORCED STEERING Tyres: 9.5 R 17.5 Modifications, prior sale, and errors are expressly reserved. The description serves for general identification purposes only and does not constitute a warranty as defined by sales law. The condition and scope of delivery are determined exclusively by the purchase contract. Our offer generally excludes new TÜV certification. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. The vehicle may bear advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2024, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, Üretim yılı: 2024, Donanım: ABS, For every used semitrailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading area: - Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° - A recess in the loading platform, including into the chamfer, for accommodating the excavator bucket arm - Pneumatic locking system with conical locking pins and reinforced locking positions - Hardwood flooring on the loading platform chamfer Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps laminated with hardwood - Hydraulically foldable ramp tips - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - Square serrated crossbars 20 x 30 mm, every approx. 200 mm on the outer frame of the ramp Axles and suspension: - BPW axles and suspension, first axle self-steering, all other axles hydromechanically forced steering - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre sensors Accessories included: - Removable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations - 1 spare wheel - External beams of the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU sidewalls, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - 2" king pin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, foldable lashing rings in the outer frame of the loading area - Expandable (galvanized) extensions up to approx. 230 mm per side - Wheel recesses with square serrated strips, 15 x 15 mm, continuously open ahead of the axles up to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel recesses - ALU elements lockable on the extension tubes of the width extensions - Expandable U-profiles for ALU covers - Wheel recesses with square serrated strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU elements lockable on the extension tubes of the width extensions - 1 pair of mechanical rear supports - Rear steering operable from front and rear via cable remote control, with axle tracking control - 1st axle with automatic lift axle function and starting aid in accordance with EU Directive 2021/535 - Under the gooseneck and at the rear crossbar left and right, each with a 7-pin socket with holder for warning boards Hedpfx Aoypb Akjhhsp - Square serrated strips 20 x 30 mm, every approx. 200 mm on the outer frame of the loading platform chamfer - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, in addition to cable remote - Wabco Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Durum: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long - Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood flooring on the bevel of the loading platform Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually - Air suspension with lift and lower valve - Tires: 235/75 R 17.5 twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS tire sensors installed in all wheels, including spare wheels Accessories included: - Detachable front wall, steel, approx. 400 mm high Hjdek Aht Uopfx Ahhep - 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch - Parking bracket for warning signs on gooseneck when not in use - 1 spare wheel - On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized - On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin - 2'' king pin - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with two-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Telescopic width extensions (galvanized) approx. 230 mm per side - Wheel recesses with square climbing strips - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with single track axle monitoring - 1st axle with automatic lifting axle function - Central lubrication system with 1 pump, BEKAMAX brand - Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon

Durum: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm Gooseneck rear with bevel approx. 1,000 mm x 10° Loading Area: Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10° Recess in the incline and extending into the loading area for accommodating the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected within the extendable beam and adjust to the respective loading area length Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards Axles and Suspension: BPW axles and suspension, two fixed axles, two steering trailing axles Electromagnetic reverse lock activated via reverse gear and manually Air suspension with lifting and lowering valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO brake system, EBS-E according to EU regulations Lighting System: 24-volt lighting system, “ASPÖCK-NORDIK full LED” Metallization: Standard HRM metallization of the external frame Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished Steel Structure: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified according to DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Included accessories: Hodpfx Ahok Ahugehsp Removable steel front wall, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 Round NATO socket on the front connection strip Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches) 1 spare wheel with mounting adapter External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring 1 pair screw-in lashing rings Approx. 40 mm thick hardwood floor above gooseneck On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized 2" king pin Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 4 wheel chocks with holders Provision for aluminium approach ramps Mechanical landing gears with 2-speed gearbox and crank On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate Slotted holes at the front of the loading area for attachable and repositionable bridging plates 1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering Front and rear with longe...

Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Hedpfxsrigw Re Ahhjp Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.

Durum: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck: Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4 and 8x4 Hsdpfomfqi Iox Ahhop Loading Platform: Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10° A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-part Steel Ramps: One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide Hardwood covering Hydraulically folding ramp tips Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward Braking System: WABCO EBS-E brake system in compliance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface Treatment: Entire steel structure shot-blasted automatically after welding using a blast wheel Second blasting with corundum for optimal coating adhesion Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax Rims in silver grey Steel Structure: Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC, S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection strip for supply lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, then every approx. 400 mm One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area Gooseneck guide plate for the saddle plate, approx. 500 mm wide Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform 1 sliding intermediate table for the telescopic tube with large cross-section Operating valves for hydraulic ramps on right side of vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring

Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Hjdsi Ai E Rjpfx Ahhjp Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durum: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457 Specifications: Model year: 2012 3 axles Length: 1325 cm Net weight: 12,178 kg Gross vehicle weight: 59,000 kg 12-ton axles Steerable on all axles Ready for delivery Description: Hjdjy T D Sqopfx Ahhjp 2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension. The extension measures 14 meters. Ready for delivery. TÜV: Yes EU-approved until: 28.02.2027 Own weight: 12,178 Total weight: 59,000 Model: Telemax flatbed semi-trailer with 27-meter extension = Further information = Please contact ATS Norway for more information.

Durum: yeni, güç: 375 kW (509,86 bg), yakıt türü: dizel, boş ağırlık: 15.500 kg, azami yük ağırlığı: 10.425 kg, toplam ağırlık: 26.000 kg, lastik boyutu: 315/80 R 22.5, dingil konfigürasyonu: 3 dingil, dingil mesafesi: 5.200 mm, frenler: retarder, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, koltuk sayısı: 2, yatak sayısı: 1, Donanım: ABS, araç içi bilgisayar, basınçlı hava freni, diferansiyel kilidi, hız sabitleyici, kamyon kaydı, klima, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, sisal lambaları, vinç, Mercedes-Benz Actros 2551 6x2-4LL Değiştirilebilir Kasa Abrollkipper | Palfinger Epsilon Q 150Z96 Hurda Kepçeli Vinç | Palfinger Palift HT20ATEC Kanca Sistemi | Yönlendirilebilir kaldırma dingili | Otomatik şanzıman, Euro 6, soğutucu kutu | Park ısıtıcısı, park klimasi, hız sabitleyici | İç kontrol ve uzaktan kumanda | Geri görüş kamerası | Retarder | elektrikli camlar, elektrikli aynalar | Römork bağlantısı | Hata, giriş hatası ve ön satış hakkı saklıdır. Hodezf Ityepfx Ahhop

Durum: ikinci el, boş ağırlık: 11.900 kg, azami yük ağırlığı: 39.060 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear gooseneck in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable Load Floor: - Extendable load floor - 5 pairs of swivel-out lashing rings (LC 5,000 daN) - 3 pairs of swivel-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the load floor (LC 10,000 daN) - Cutouts in the external frame of the load floor for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate over the axle area Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment - Maximum load per pair: 40,000 kg Axles and Tyres: - BPW axles, two rigid axles, two steering axles - Air suspension, drum brakes, with lift/lower function - The self-steering axles feature an electro-magnetic reverse lock, activated automatically when reversing or manually - Axle tools - Tyres: 205/65 R17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with mount in front of front wall - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the inclined section of the loading area Hjdpexwnfmjfx Ahhjp - A mounting bracket for beacon at the rear of the semi-trailer - Galvanized extendable extensions, approx. 230 mm per side - White reflective tape on side in compliance with EU regulations, extension and rear red - One bracket per side at gooseneck and rear panel for warning boards, including socket - One mudguard at the rear of the semi-trailer - European reflector plates (red-yellow) at rear - ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm, plug-in design - The rear galvanized insert stakes are removable. Total body length approx. 2,560 mm - 7 pairs WADER container pockets: - 1x 20ft container on the load floor - 1x 40ft container on the load floor - 1x 40ft container above the gooseneck - 2x 20ft containers - Support stand with 1 pair WADER container pockets (king pin load approx. 20,000 kg) - 7 pairs of stake pockets for insert stakes 100 x 50 mm in outer frame of load area - Lift axle on front axle with control via TEBS E depending on current axle load and loading condition - Sliding mounting rail for ALU approach ramps at the rear of the vehicle - Sanded, painted non-slip coating applied to checker plates on the gooseneck and load floor - Four extendable warning boards (approx. 400 mm extension) approx. 423 x 423 mm with position lamp - Bracket for beacon on the warning boards - 80 km/h speed stickers on rear and both sides - Load gauge for axle load determination including load chart