Kullanılmış Faymonville Max Trailer Max510 Tiefbett 2X12 T Pa satın al (60.307)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x12 t PA
Çağrı
Koşul: yeni, azami yük ağırlığı: 33.750 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including units immediately and short-term available, on our website.
Extract from the equipment list. Full specification available upon request.
Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- Compatible with tractor units: 4x2, 6x2, and 6x4
Lowbed:
- Lowbed with external beams, extendable SUPER LOW design, approx. 6,850 mm length
- Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking
- Supply lines protected within the extendable beams, automatically adapting to the lowbed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess, approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings recessed in the trough, LC 16,000 daN
- 1 pair of lashing rings recessed in the trough, LC 10,600 daN
- 2 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame
Pendel Axles:
- Pendel axles, all axles forced steered by hydro-mechanical linkage
- Hose rupture valve on axle leveling cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and pre-insert for securing in the lifted position
- Axles painted with 2 layers of single-color 2-component paint in FAY Grey 34-0260
- Technical axle load: 12,000 kg each, with hydraulic axle compensation
- Axle tools
Dsdpoxbmn Uefx Addokl
- Tyres: 245/70 R 17.5 3PMSF (brand at our discretion), load index (146/146F)
TPMS:
- TPMS tyre pressure monitoring system compliant with ECE R 141
Brake System:
- Wabco braking system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit
Electrical System:
- Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets, according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Construction:
- Steel structure made of high-strength fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Coating:
- Complete steel structure is automatically shot-blasted after welding using a turbine blasting machine
- Second blasting treatment with corundum for optimum coating adhesion
- Full chassis metallized by HRM process with ZINACOR 850 (85% Zinc/15% Aluminium) for superior corrosion protection
- Final coating: two layers of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL
Including the following additional features:
- 2-inch king pin
- One galvanized steel headboard, approx. 400 mm high
- Remote steering from front and rear via cable remote with pushbuttons, axle alignment control (without installation in the tractor unit)
- Electro-hydraulic power unit
- 2 pairs of bolted container locks on external beams, including 2 pairs of container locks for 1 x 20' or 1 x 40' container
- On the gooseneck: detachable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (LxH)
- Rear galvanized removable stakes
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Çağrı
Koşul: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the Equipment List. Complete equipment details available upon request.
Loading Platform:
- Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length
- Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Gooseneck:
- Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractor units: 4x2, 6x2
Rear Chassis:
- Rear chassis in short version with closed outer frame and checker plate cover
- Chassis with excavator recess, closed in the rear half to accommodate air tanks
- 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN)
- 1 pair of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN)
Axles:
- BPW axles with hydro-mechanical forced steering
- Technical axle load: 12,000 kg each
- Air suspension with lift and lower valve
Tyres:
- 245/70 R 17.5 3PMSF tyres
- Manufacturer of our choice
- Load index (146/146F)
- TPMS tyre pressure monitoring system per ECE R 141
- Data transfer to the tractor via standardized EBS interface (ISO 11992)
- The tractor must be capable of transmitting and displaying these data for correct indication
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Electrical System:
- Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the turn signal
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel Structure:
- Made from high-strength fine-grained steels
- Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Coating:
- Complete steel frame automatically shot-blasted after welding
- Second blasting treatment with corundum for optimal coating adhesion
- HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection
- Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL
- Rims in silver
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paint not available
- Paint build-up tested in salt spray fog test according to ISO 9227-NSS
- Cavity sealing with special wax
Including the following additional equipment:
- 2-inch king pin
- One galvanized steel front wall, approx. 400 mm high
Djdpfx Asxarl Neddjkl
- Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included)
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings
- Electro-hydraulic power unit
- Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams
- Without container locks
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Çağrı
Koşul: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website.
Excerpt from the equipment - full specification upon request.
Loading area:
- Low-bed with central beam, extendable version, length approx. 6,750 mm
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN)
Gooseneck:
- Gooseneck hydraulically raisable/lowerable and detachable
Rear running gear:
- Rear running gear, short design, with closed outer frame and tread plate cover
- Running gear with excavator recess, rear half closed to accommodate air tanks
- 2 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN)
Axles:
- BPW axles, hydro-mechanically forced-steered
- Air suspension with lift and lower valve
Tyres:
- Tyres 245/70 R 17.5 3PMSF
- TPMS: Tyre Pressure Monitoring System according to ECE R 141
Braking system:
Dkjdpfx Adoxf Siljdsl
- Wabco braking system according to EU regulations, with EBS-E (2S2M)
Paintwork:
- High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red
Including the following additional equipment:
- 2 king pins
- Galvanized steel front wall, height approx. 400 mm
- Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit)
- Electro-hydraulic power unit
- Load manometer for axle load determination, incl. load diagram
- On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
- Separate air connection with air gun on the gooseneck
- 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right
- 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
- 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear
- Galvanized extensions, extendable by approx. 230 mm per side
- Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals)
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover
- 2 pairs of WADER container pockets in the loading area, for 1 x 20' container
- 1 removable galvanized intermediate platform with 1 pair of WADER container pockets
- 1 pair of steel ramps to bridge the pick-up hooks of the low-bed
- Sand coating on the loading area as slip protection
- HRM metallization (High Resistance Metallization)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMegamax Tiefbett 2x12 t PA
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website.
Partial equipment overview. Complete specifications available on request.
Gooseneck:
Dksdpsx Uvllofx Addol
* Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long, hydraulically liftable/lowerable and detachable
* Technical fifth-wheel load: 25,000 kg
* Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Low-bed:
* Low-bed designed as a telescopic vessel bridge in low-profile construction with front extension and mechanical locking
* Dimensions: approx. 6,850 mm x 2,540 mm (L x W)
* Supply lines protected within the extendable beams and automatically adjust to the respective low-bed length
Axles and Suspension:
* PENDLE-AXLE
* All axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation
* Cylinders with automatic RESET function
* Hydraulic cylinders with shut-off valves and locking pins for securing in the raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Tyres: 245/70 R 17.5
* Rear chassis with closed outer frame, checkered plate covering, and continuous prism excavator recess approx. 1,250/700 x 505 mm, open at the rear
Braking System:
* WABCO EBS-E braking system according to EU regulations, without connection cable to the tractor unit
Paintwork:
* Trailer color, RAL 3002 Carmine Red
Included accessories:
* Plug-in steel front wall, approx. 400 mm high
* 3 kW electric-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches, supply connections at the tractor unit not installed)
* Outer beam of gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring left and right on the rear bevel of the gooseneck (LC 6,000 daN)
* 2-inch king pin
* One locking point approx. every 500 mm on the extension
* 1 pair steel ramps with climbing strips and mounting pins for bridging the low-bed hook mounts
* 1 lashing ring each left and right on the front cross member (LC 10,000 daN)
* Lashing rings with retaining spring every approx. 1,200–1,300 mm on the outside of the inner beams of the loading deck
* Lashing rings with retaining spring every approx. 1,200–1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams
* Recesses above the lashing rings
* 1 hanging lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outside of the loading deck outer beams
* Preparation for removable load floor
* Hook-in strip at the front of the rear chassis towards the low-bed for loose approach ramps
* Chassis with chamfered rear corners
* Hook-in strip for loose aluminium approach ramps at the vehicle’s end cross beam
* Remote steering from front and rear operable via cable remote control with push buttons, including single track control for axles, not installed in the tractor unit
* Mechanical pin and tab coupling from the low-bed to the chassis for changing the loading platform or installing extension beams, with electro-pneumatic-hydraulic couplings
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
* 2 axle load pressure gauges mounted on the left side
Including special accessories:
* On the gooseneck, 1 pair of plug-in aluminium sidewalls, approx. 400 mm high, anodized finish.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett Kombination ATX
Çağrı
Koşul: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website.
Excerpt from the equipment list. Complete specification available on request.
Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4
3-axle compact front bogie:
* Hook coupling at the front and rear. Length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Low bed:
* ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick
* Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear
* Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm
* Loading height approx. 480 mm with ground clearance of approx. 150 mm
5-axle rear bogie:
* Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* Pendulum axle
3-axle front bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
5-axle rear bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paint finish:
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection
* Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system
Includes accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version
* 3.5" king pin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with a separate air connection for pneumatic tools
* BEKA-MAX central lubrication for a 3-axle bogie
* Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams
* Without container locks
* Brackets on the outer beams of the loading platform for attaching foldable extensions
* One 7-pin socket left and right, front and rear, on the rear bogie for warning signs
* BEKA-MAX central lubrication for a 5-axle bogie
* Socket on the rear bogie for the cable remote control for rear axle steering
* Rear bogie with trough
* 2 LED reversing lights mounted on the rear plate
* European reflective signs (red-yellow) at the rear
* One mudflap at the rear
* One LED beacon with bracket left and right on the end cross member
* Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck
Dkodpfx Aow Tgp Dsddjl
* 1-cycle
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Çağrı
Koşul: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
Dkodpfx Adjwhywfjdol
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 2-Achs-Tiefbett mit Pendelachsen
Çağrı
Koşul: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long
- Gooseneck hydraulically height-adjustable and detachable
- Technical fifth wheel load: 23,000 kg
- Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
Dkjdohlz R Sepfx Addel
- Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm
- Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings foldable outward
- 1 pair of lashing rings lying in the trough
- 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame
Pendulum Axle and Tires:
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position
- Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R17.5
- TPMS (Tire Pressure Monitoring System) compliant with ECE R 141
Accessories:
- Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel
- On the galvanized connection strip at the front: yellow-red air couplings
- 4 wheel chocks
- Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings
- Electro-hydraulic unit
- White reflector tape on sides, extension and rear, according to EU regulations
- European reflector panels (red-yellow) at the rear of the trailer
- At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
- 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4
- Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized plug-in posts are removable (body length approx. 2,560 mm)
- Gooseneck at the upper rear area closed with a removable cover
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Fold-out extensions, approx. 230 mm per side
- 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN)
- 1 pair of steel ramps for bridging the low bed’s mounting hooks
- Sanded layer painted on the loading platform as an anti-slip coating
- Speed stickers 80 km/h on rear and both sides
- Rear chassis’ bucket recess at the rear closed with a plug-in plate
- Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm
- Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determining axle loads
- HRM (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Çağrı
Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
Dsdpjh Hm Thofx Addekl
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX 710 Tiefbett 2+4 PA
Çağrı
Koşul: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website.
Selection of features. Full specification available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and removable, length approx. 3,650 mm
* 2 pairs of folding lashing rings on the outside (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN)
* For 6 x 4 or 8 x 4 2-axle tractor units
Compact front running gear:
* Hook receivers front and rear, length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Excavator deck:
Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear
* Basic width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Main beam height: approx. 400 mm
* Main beam width: approx. 1,350 mm
* Loading height approx. 550 mm, ground clearance approx. 150 mm
4-axle rear running gear:
* Mechanical bolt-eye coupling for attaching a lowbed at the front
* Rear end crossmember chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
Pendulum axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
Tyres
* Front running gear:
* 8 x (manufacturer’s choice, M+S) 285/70 R19.5
* Tyres rear running gear:
* 16 x (manufacturer’s choice, M+S) 285/70 R19.5
* Load index 150/148J
Dkjdpfx Adjxbmpledsl
Paintwork:
* Complete steel structure automatically shot-blasted by turbine system after welding. Second blasting treatment with corundum for optimal adhesion of coating system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL
Including the following accessories
* Steel front wall, approx. 400 mm high
* Plug-in aluminium side and rear walls on the gooseneck, approx. 400 mm high, anodized
* 3.5-inch king pin
* Truck hydraulic connection with flow control valve (20 l/min)
* Gallows for suspending supply lines, the tractor tank must be at least 80 l
* with MAX Trailer coupling pieces, otherwise quick couplings to be supplied ex works by customer
* BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2
* Tool kit Art No. 612452
* Multi-coupling hydraulic connections on the gooseneck
* Front running gear with separate air fitting for pneumatic screwdriver
* BEKA-MAX central lubrication for one 2-axle running gear with standard grease NLGI-2
* One 7-pin socket each left and right on the rear of the front running gear for warning panels
* Threaded insert option (Ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw rings (LC 16,000 daN)
* Folding extensions with steel covers, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX central lubrication for one 4-axle running gear with standard grease NLGI-2
* At the rear running gear, one socket for the cable remote control of the steering
* Rear running gear with trough
* Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
* Radio remote control:
* Operation of the power pack, start/stop of the diesel engine
* Operation of the steering, in addition to th
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett (Baggerbett)
Çağrı
Koşul: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment specification. Complete equipment details available on request.
Gooseneck
* Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4.
3-Axle Compact Front Bogie
* Hook mounts at front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Dksdsuvbdtjpfx Addel
Excavator Deck
* Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
5-Axle Rear Bogie
* Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendle axle
Front Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle
5-Axle Rear Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey
Including Accessories
* Steel front wall, approx. 400 mm high
* Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish
* 3.5 kingpin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connectors on gooseneck
* BEKA-MAX central lubrication for one 3-axle bogie
* One 7-pin socket left and right at rear of the front bogie for warning panels
* Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension
* Steel mattresses with rubber flooring, approx. 12 mm thick
* One 7-pin socket left and right, front and rear on rear bogie for warning panels
* BEKA-MAX central lubrication for one 5-axle bogie
* Socket on rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
*
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX510-Z-2H-ATX-A-6.85-PA
Çağrı
Koşul: yeni, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA
Speed: 80 km/h
Gross weight: 47,000 kg
Fifth wheel load: 23,000 kg
Axle load: 24,000 kg
Gooseneck length: 3,750 mm
Loaded saddle height: 1,200 mm
Rear steering radius: 2,300 mm
Loading platform length: 6,850 mm
Extendable by: 5,500 mm
Loading height at maximum load: 350 mm
Chassis length: 2,600 mm
Rear chassis loading height at max. load approx: 1,005 mm
Suspension travel: -150/+450 mm
Axle spacing: 1,360 mm
Overall width: 2,540 mm
Gross weight depends on fifth wheel load.
Lowbed: Lowbed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm.
Dodpfoizu Nwjx Addjkl
Lowbed with fixed hardwood floor approximately 40 mm thick and mechanical locking device. Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length.
5 pairs of lashing rings, foldable outward (LC 10,000 daN).
6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings.
Rear chassis: Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear.
2 pairs of lashing rings, foldable outward (LC 10,000 daN).
1 pair of lashing rings, flat in the trough (LC 8,000 daN + 5,300 daN).
2 pairs of pocket sockets for stanchions 100 x 50 mm in the external frame.
Gooseneck: Gooseneck in SNT design to optimize usable platform length, length approx. 3,785 mm.
Gooseneck hydraulically lift/lowerable and detachable.
Technical fifth wheel load: 23,000 kg
For tractor units: 4x2, 6x2, and 6x4
PENDLE-AXLE: “PENDLE-AXLE”, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and plug pins for securing in raised position. Axles finished with two coats of 2-component paint, single color "FAY-Grey-34-0260".
Technical axle load: 12,000 kg
Hydraulic axle compensation. Axle tools.
Brake system: Brake system in accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit.
Electrical system: Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connection according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel construction: Steel construction made of high tensile fine-grained steels. Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Painting: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer. Premium two-component (2K) topcoat in one RAL color of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint possible.
Tyres: Tyres 245/70 R 17.5 3PMSF
Manufacturer’s choice. Load index (146/146F).
Prepared for fitting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams. Without container locks.
• 2” king pin
• Galvanized steel front wall approx. 400 mm high
• 1 spare wheel with holder in front of the front wall
• 2 wheel chocks with holder on the front wall
• Yellow-red air couplings on the galvanized connection strip at the front.
Remote steering from front and rear via cable remote control with pushbuttons, with single-track axle monitoring (without installation in the tractor unit).
Hydraulic connections from the gooseneck to the lowbed
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full specification available upon request.
Neck (Gooseneck):
* Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN)
* Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN)
* Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering
Two-piece steel ramps:
* One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm)
* Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm
Landing gear:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)
* Tires 235/75 R 17.5 3PMSF
Djdoy Nu Hkjpfx Addjkl
* TPMS tire pressure monitoring system according to ECE R 141
Axles:
* BPW axles and suspension
* 2 rigid axles, 1 trailing steering axle
* Technical axle load: each 12,000 kg
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Colors:
* Semi-trailer in RAL 3002 carmine red
* Rims silver
* Tarp in RAL 9006 silver
Including accessories:
* 1 spare wheel holder below loading platform, right side in driving direction
* 2-inch king pins
* Galvanized steel front wall
* At the galvanized connection strip at the front: yellow-red air couplings
* 4 wheel chocks with holder on the front wall
* 3 height wooden boards
* Galvanized folding supports beneath the ramped section of the loading area
* Height-adjustable tarpaulin structure, approx. 3,960 mm?
* Galvanized front wall with tensioning mechanism for sliding curtains
* EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls)
* 3 pairs of sliding stakes on the loading platform
* The body can be hydraulically widened rear left/right by approx. 750 mm
* Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height
* Upper edge of body approx. 3,960 mm (loaded)
* Driving with an open sliding roof is not permitted and will damage the tarp
* Anti-slip sand coating painted onto checker plates on gooseneck and loading platform
* Cover plates to bridge the space between ramps and loading platform
* Electro-hydraulic unit at the rear under the loading platform
* Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket
* Ramp control valves positioned on the right side of the trailer
* Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm)
* Grating cover in the loading platform's sloped section...
Küçük ilan
mengen /B 311 am bodensee
2.309 km
Alçak şasi dorse
FAYMONVILLEMAX TRAILER AZB 4500 mm /LENKACHSE /BPW/CONTAIN
Çağrı
Koşul: ikinci el, toplam ağırlık: 39.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 13.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, Üretim yılı: 2022, Donanım: ABS, running no. 12389
LOW LOADER MAX TRAILER 3-axle
F-S43-1AAF / Extendable 4500 mm / STEERING AXLE
Manufacturer: MAX TRAILERS
First registration: 07.2022
Dimensions: 13,400 x 2,540 x 890 mm
Gross vehicle weight: 49,500 kg
Unladen weight: 10,284 kg
Payload: approx. 38,000 kg
Fifth wheel load: 18,000 kg
Air suspension with raise/lower function
Drum brakes
ABS
EBS
Mileage: 142,000 km
Axle make: BPW 10.5 t
Lift axle
Steering axle
Trailing steering axle
Lashing rings
Superstructure paint: red
Chassis paint: GALVANIZED / RED
Tyres: 12-fold
Tyre condition: 7 - 10 mm tread
Rear axle tyres: 235/75 R 17.5
MAX = FAYMONVILLE MAX 100
Ideal for concrete slabs / timber walls / concrete prefabricated parts etc.
ASH 1200 mm / hardwood floor
Rear loading edge: 890 mm
When lowered: 840 mm
Container locks for: 1 x 40/30 and 20 foot
Incl. 4 x twistlocks
Stanchion pockets + 5 t lashing rings on the loading area
EXTENDABLE by 4500 mm in 500 mm increments
Intermediate table can also be removed
TRAILING STEERING AXLE
Aluminium tank / HOT-DIP GALVANIZED
TOP CONDITION! Currently sample images dated 06.2025
All information supplied without liability. Subject to prior sale!
Dksdpoy Ag Adsfx Addol
If you have any questions about this or other vehicles, please call us.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-A-Doppeltele-Semi-zwangsg.
Çağrı
Koşul: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report.
Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Loading Platform:
- Extendable loading platform with rear bevel approx. 500 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 4 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN)
- 1 intermediate table 250 mm
- Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN)
- Approx. 48 mm hardwood flooring, checker plate over the axles
Axles and Tyres:
- BPW axles, hydro-mechanical forced steering
- Technical axle load: 12,000 kg
- Air suspension with lifting/lowering valve
- Axle tool kit
- Tyres: 235/75 R17.5
Braking System:
- Braking system compliant with EU regulations, EBS-E (4S3M)
Included Accessories:
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection panel
- 4 wheel chocks with holders on the front wall
- Spare wheel with holder in front of the front wall
- Electro-hydraulic unit
- Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring
- Recess at rear of gooseneck to accommodate ALU loading ramps
- Galvanized, extendable widening by approx. 230 mm per side
- European reflector panels (red-yellow) at the rear of the trailer
- White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear
- Holders for warning signs on both the gooseneck and rear plate, including sockets left and right
- Galvanized folding supports under the rear bevel of the loading platform
- Mounting bracket for a beacon at the rear of the trailer
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard
- Mud flap at the rear of the trailer
- Manual and documentation
- On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm
- Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm)
- 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container
- 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform
- Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle
- Lift axle on the front axle with control via TEBS E according to current axle load and loading condition
- Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- Beacon bracket on the warning signs
- Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring
- Painted sand layer on checker plate above king pin and loading platform for slip resistance
- 80 km/h speed sticker at the rear
Dsdpfx Adsv Hr Axodekl
- Load gauge for determining axle loads including load chart
Küçük ilan
Overpelt
2.688 km
Düşük yükleyici
FAYMONVILLEMAX Trailer 2-AXES LOWLOADER 21T - ALU RAMPS - ...
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, ilk tescil: 06/2017, toplam uzunluk: 7.000 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- 2 aks
- Havalı süspansiyon
= Diğer bilgiler =
Aks konfigürasyonu
Dkodpfxsy D Hl Io Addjl
Lastik ebatları: 235/70 R17.5
Lastik diş derinliği: %75
Frenler: kampana frenler
Arka aks 1: çift teker; Maks. aks yükü: 10.500 kg
Arka aks 2: çift teker; Maks. aks yükü: 10.500 kg
Ağırlıklar
Azami toplam ağırlık: 21.000 kg
Durum
Teknik durumu: çok iyi
Görsel durumu: çok iyi
Hasar: yok
Kimlik
Plaka: QALO590
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Çağrı
Koşul: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.
Equipment excerpt. Full equipment details available upon request.
Gooseneck:
* Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles
Landing legs:
JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t)
Tyres:
* Tyres 205/65 R17.5 - brand of our choice
TPMS:
* TPMS tyre pressure monitoring system pursuant to ECE R 141
Axles:
* BPW axles, two rigid axles, two steering axles
* Air suspension with lifting/lowering feature
* Drum brakes
* Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Brake system:
* WABCO braking system according to EU regulations with EBS-E (4S3M)
Electrical system:
* Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3)
* All LED side marker lamps flash synchronously with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Trailer color RAL 3002 Carmine Red
* Wheels Silver Grey
* Tarpaulin RAL 9006 (brilliant direct)
Options included:
* One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket
* 2-inch king pin
* Galvanized steel bulkhead
* Yellow-red air couplings at the galvanized front connection strip
Dkjdpfx Aoy Aug Dsddel
* 4 wheel chocks with holder mounted on the bulkhead
* 3-level wooden boards
* Galvanized folding supports under the loading area chamfer
* Mount for beacon at the rear of the trailer
* Height-adjustable tarpaulin structure – approx. 3,960 mm
* Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm
* EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall)
* 3 pairs of sliding stanchions in the loading area
* The body can be hydraulically widened at the rear to the left and right by approx. 750 mm
* Sliding roof with fold-up portal beam
* Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded)
* Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin
* Rear of the body with closed anodized ALU swing doors
* Hook-in rail for ALU drive-on ramps at the rear of the vehicle
* Control valves for hydraulic body widening mounted on the right trailer side
* White reflective tape in accordance with EU regulations, red tape at the rear
* Electro-hydraulic unit mounted at rear under loading area
* Mud flaps at the rear of the trailer
* European reflective warning signs (red-yellow) at the rear of the tr
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Extendable loading platform:
* Loading platform in extendable design with rear bevel approx. 500 mm x 8°
* 8 pairs of foldable lashing rings (LC 10,000 daN)
* 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Two-section steel ramps:
* One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering
* Ramp with hydraulically folding ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position
Axles:
* BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes
* Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually
* Technical axle load: 12,000 kg each
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data.
Dksdpfxoy Augwo Addjl
Landing legs:
* JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel construction automatically shot blasted after welding using a wheel blast system
* Second blasting using corundum for optimal adhesion of paint system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL
* Rear section metallized and painted in RAL 9010 pure white
Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings at the galvanized front connector panel
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the platform’s rear bevel
* Super Grip rubber ma
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website.
Excerpt from the equipment. Full specification available upon request.
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Load area:
* Load area with rear bevel, approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
Dsdpfx Ajy Auhujddekl
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering
Two-part steel ramps:
* 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area
* Ramps with hydraulically foldable sections and hydraulic lifting device
* Maximum load per pair: 30,000 kg
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steer axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Tyres:
* Tyres: 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R 141
Braking system:
* WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection
* Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
* Wheel rims in silver
Incl. accessories:
* One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket
* 1 spare wheel carrier under the load area on the right
* 2-inch kingpin
* One galvanized steel front wall
* At the galvanized front connection rail: yellow-red air couplings
* 4 wheel chocks with holders at the front wall
* 3-tier wooden planks
* Galvanized folding supports under the rear bevel
* Holder for beacon at the rear of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm
* Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm
* EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls)
* 3 pairs of movable stanchions in the load area
* Body hydraulically expandable to left/right at rear by approx. 750 mm
* Sliding roof with high-lift portal carrier
* Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details upon request.
Gooseneck:
* Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform in extendable design:
Dsdpfx Aoy Aufmeddskl
* Extendable load platform with rear bevel approx. 1,000 mm x 8°
* 6 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be activated via reverse gear and manually
* Air suspension with raise/lower valve
* Axle tool
Brake system:
* Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Steel construction:
* Steel construction of high-strength fine-grained steels
* Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Painting:
* Complete steel structure automatically blast-cleaned after welding with shot-blasting system
* Secondary blasting with corundum for optimum coating adhesion
* Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL
* Wheel rims in silver grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Paint system tested in salt spray fog test according to ISO 9227-NSS
* Cavity sealing with special wax
Electrical system:
* Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098
Accessories included:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection strip at the front
* 4 wheel chocks with holder at the front wall
* Provision at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under the rear bevel of the loading area
* On the gooseneck and rear panel left and right, each with a holder for warning boards including socket
* Load manometer to determine axle loads including load diagram
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm)
* One galvanized toolbox integrated in the beveled gooseneck
* 3 pairs WADER C
Küçük ilan
ANDELST
2.692 km
Düşük yükleyici
FaymonvilleMax Trailer 3-assige dieplader Extendable
Çağrı
Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, izin verilen aks yükü (aks 3): 10.500 kg, ilk tescil: 11/2022, toplam uzunluk: 13.900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.400 mm, süspansiyon: hava, lastik boyutu: 235/75 17.5, dingil mesafesi: 2.300 mm, Üretim yılı: 2022, Donanım: ABS, = Additional Options and Equipment =
- EBS (Electronic Braking System)
- Rear air suspension
- Spare wheel
Dedsyztt Tepfx Addjkl
= Remarks =
- Faymonville / Max Trailer 3-axle low-loader (Type: MAX100)
- Loading platform dimensions: length 930 cm x width 254 cm
- Extendable to: 1280 cm (+ 350 cm)
- Loading height: 91 cm
- Lashing rings
- Wheel recesses
- Extension beams
- Gooseneck dimensions: length 252 cm x width 247 cm x height 40 cm
- Loading height: 149 cm
- 2 ALTEC loading ramps made of aluminum (Type: VFR120)
- Dimensions: length 235 cm x width 47 cm
- Maximum gradeability: 30% (16.5°)
- 10.5-ton axles!
- 18 tons coupling pressure!
- 49.5 tons technical gross vehicle weight!
- AS NEW CONDITION!
- Always stored indoors!
- Only 20,000 km driven!
= Additional Information =
Axle configuration
Tire size: 235/75 17.5
Axle brand: BPW
Suspension: Air suspension
Rear axle 1: Twin tires; max. axle load: 10,500 kg; tire tread left inside: 70%; tire tread left outside: 70%; tire tread right inside: 70%; tire tread right outside: 70%
Rear axle 2: Twin tires; max. axle load: 10,500 kg; tire tread left outside: 80%; tire tread right outside: 80%
Rear axle 3: Twin tires; max. axle load: 10,500 kg; steered; tire tread left inside: 70%; tire tread left outside: 70%; tire tread right inside: 70%; tire tread right outside: 70%
Weights
Unladen weight: 10,069 kg
Payload: 35,931 kg
Gross vehicle weight: 46,000 kg
Maintenance, History and Condition
Number of owners: 1
APK (MOT/Technical inspection): valid until 11/2026
Technical condition: good
Visual condition: good
Identification
Registration number: OT-87-PP
Product Safety
Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL
Küçük ilan
Dortmund
2.568 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
FaymonvilleMAX Trailer 3-A-Tele-Semi-Radmul.-Rampen
Çağrı
Koşul: ikinci el, boş ağırlık: 11.200 kg, azami yük ağırlığı: 36.800 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report.
Dkodpfxoyylduj Addjl
Gooseneck:
- Gooseneck with rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood floor
Extendable loading area:
- Telescopic loading area with rear bevel approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square rungs as climbing bars and widening in the lower area
- Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- Incl. 3-piece removable galvanized covers above the wheel recesses (W 670 mm) – max. point load 5 t per cover
- Recess in the bevel and extending into the loading area for the excavator bucket arm approx. 2,900 x 750 x 210/290 mm
- 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood covering
- Ramp with hydraulically foldable ramp sections, hydraulic lifting mechanism, and hydraulic side shift
- Maximum load per pair: 40,000 kg
Axles and tires:
- BPW axles and suspension, 2 fixed axles, 1 trailing steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tools
- TPMS tire pressure monitoring system as per ECE R 141
- Tires: 235/75 R17.5 3PMSF
Accessories included:
- On the gooseneck and at the rear, left and right, each with a bracket for warning signs, including socket
- One spare wheel with holder in front of the front wall
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the galvanized connection rail at the front
- 4 wheel chocks with holder
- Galvanized, extendable width extensions approx. 230 mm per side
- Galvanized folding supports beneath the loading area bevel
- Cover plates to bridge the gap between ramps and loading area
- White reflective tape in accordance with EU regulations on the sides and on the extension; rear in red
- Electro-hydraulic unit at rear, under the loading area
- European reflective signs (red-yellow) at the rear of the semi-trailer
- Four extendable warning signs approx. 423 x 423 mm each with a position light, extendable by about 400 mm
- Bracket for beacon on the warning signs
- On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm
- The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container
- 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading surface
- One removable, galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing bars every 200 mm on the outer frame of the loading area bevel
- On the checkered plates on the gooseneck and the loading area, painted-on sand layer as slip protection
- Speed sticker 80 km/h at the rear and on both sides
- Load gauge for determining axle loads, including load chart
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedr.
Çağrı
Koşul: ikinci el, boş ağırlık: 10.650 kg, azami yük ağırlığı: 40.310 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.650 kg, Donanım: ABS, A current and comprehensive inspection and function report is provided with every used semi-trailer.
Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Gooseneck, straight design at rear
- 3 pairs of lashing rings (LC 5,000 daN)
Loading Area:
- Extendable loading platform
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 3 pairs of fold-out lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- Cut-outs in the outer frame for attaching tensioning straps (LC 2,000 daN)
- Approximately 48 mm thick hardwood floor, anti-slip chequer plate above the axles
Axles and Tyres:
- BPW axles, two rigid axles and two trailing steering axles
- Air suspension with drum brakes, raising/lowering function
- Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually
- Axle tools
- Tyres: 205/65 R17.5
Dodpfx Adexfa E Uedekl
Brake System:
- WABCO braking system compliant with EU regulations featuring EBS-E (4S3M)
Steel Construction:
- Structure made from high-strength fine-grain steels
- Steel grades:
* S355J2+N/S355MC (yield strength 355MPa)
* S690QL/S700MC (yield strength 690MPa)
Paintwork:
- First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single-colour in Nova Grey
Included Accessories:
- Spare wheel carrier in front of headboard
- 2" kingpin
- Galvanised steel front wall approx. 400 mm high
- Galvanised connection strip at the front with yellow-red air couplings
- 4 wheel chocks with holder on the front wall
- Galvanised foldable supports under the taper of the loading platform
- Mount for a beacon at the rear of the trailer
- Galvanized, extendable width extensions approx. 230 mm per side
- White reflective tape according to EU regulations on sides, extension, and rear (red at rear)
- At the gooseneck and rear panel, left and right: one holder each for warning signs including socket
- Mudflap at the rear
- European reflective plates (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system according to ECE R 141
- Removable plug-in ALU drop sides and rear wall on the gooseneck approx. 2,440 x 400 mm
- Rear, galvanised plug-in stanchions are removable (body length approx. 2,560 mm)
- 7 pairs of WADER container pockets: 1 x 20ft container on loading platform; 1 x 40ft container on loading platform; 1 x 40ft container above gooseneck; 2 x 20ft containers
- 7 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
- Lift axle on front axle with control via TEBS E depending on actual axle load and current load status
- Adjustable hook rail for ALU ramp attachments at the rear of the vehicle
- Sand layer painted onto checker plates on gooseneck and loading area as slip protection
- Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, each with position light
- Warning panels equipped with beacon mount
- 80 km/h speed stickers at the rear and on both sides
- Load gauge for determining axle loads, including load diagram
- HRM metal coating (High Resistance Metallisation) on the outer frame
- Complete steel structure shot-blasted; subsequently, defined visible surfaces hot-metallized with ZINACOR 850 (zinc 85% - aluminium 15%)
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
FaymonvilleMAX Trailer 4-A-Tele-Semi-Rampen-zwangsg
Çağrı
Koşul: ikinci el, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report.
Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick
Dkodpfeyffd Dsx Addol
Extendable loading platform:
- Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
- 5 pairs of folding external lashing rings (LC 5,000 daN)
- 3 pairs of folding external lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering
Axles and tyres:
- BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered
- Technical axle load: 12,000 kg
- Air suspension with lift/lower valve
- Tyres: 245/70 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
Two-piece steel ramps:
- One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning
- Maximum load per pair: 40,000 kg
Accessories included:
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised connection strip at the front
- 4 wheel chocks
- One spare wheel
- Electro-hydraulic power pack
- Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles
- Mounting provision at rear of gooseneck for ALU approach ramps
- European reflective signs (red-yellow) at rear of trailer
- White reflective tape according to EU regulations at the sides, at the extension, and red at the rear
- On the gooseneck and ramps, left and right, a bracket for warning signs including socket
- One mount for a revolving beacon at the rear of the trailer
- Galvanised folding supports under the platform’s rear slope
- Control valves for the ramps mounted on the right side of the trailer
- Cover plates to bridge the gap between ramps and platform
- Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2
- On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm
- Rear galvanised stub posts are removable (body length approx. 2,560 mm)
- One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap
- 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container
- 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform
- Galvanised platform extensions, extendable approx. 230 mm per side
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope
- Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition
- Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light
- Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring
- Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform
- 80 km/h speed stickers at the rear and on both sides
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX TRAILER MAX100 4A 8.60 U
Çağrı
Koşul: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U
Technical Data
Speed: 80 km/h
Gross Vehicle Weight: 60,800 kg
Fifth Wheel Load: 18,000 kg
Axle Load: 42,800 kg
Tare Weight:
Payload:
Gooseneck Length: 3,850 mm
Loaded Fifth Wheel Height: 1,250 mm
Loading Platform Length: 8,600 mm
Extendable by: 5,400 mm
Axle Spacing: 1,360 mm
Steering Radius (rear): 2,300 mm
Loading Height at Max. Load: 860 mm
Overall Width: 2,540 mm
Suspension Stroke: -55/+145 mm
Technical Description
Gooseneck
With 45° chamfered front corners and rear chamfer approx. 760 mm x 10°
3 pairs of lashing rings (LC 5,000 daN)
30 mm thick hardwood floor
Extendable loading platform
With rear bevel approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings (LC 5,000 daN)
3 pairs of outward-folding lashing rings (LC 10,000 daN)
1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000)
Approx. 48 mm thick hardwood flooring, chequer plate above the axles
Ramps
Two-part steel ramps
One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring
Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position
Max. load per pair: 40,000 kg
Tyres
235/75 R 17.5
Brake System compliant with EU regulations, with EBS-E (4S3M)
Without connection lines to the tractor unit
Paintwork
First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer
High-quality 2-component (2K) top coat, single colour, in RAL shades of choice
Rear section metallized and painted in RAL 9010 (Pure White)
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24t
Lifting capacity (50t test load)
Dsdpfx Adog Sk T Dedjkl
Steel construction made from high-strength fine-grained steels.
Steel Qualities:
Steel construction made from high-strength fine-grained steel
S355J2+N/S355MC (Yield Strength 355MPa)
S690QL/S700MC (Yield Strength 690MPa)
Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
Connection as per ISO.
24N IS0-1185
24S IS0-3731
15-pin IS0-12098
Accessories included:
One galvanized steel headboard approx. 400 mm high
2" king pin
4 wheel chocks with holders on the headboard
One holder for revolving beacon at rear of trailer
SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function
The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually
Axle tools included
Support for ALU approach ramps at the rear of the gooseneck
Galvanized folding supports under the loading platform chamfer
Mechanical safety lock for the loading platform extension
One spare wheel with holder in front of the headboard
Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer
At the front galvanized connector strip, yellow-red air couplings
On gooseneck and rear apron left and right, mounts for warning plates, including sockets
A mudflap at the rear of the trailer
Manual and description
On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH)
Rear galvanized stanchions are removable
Body length approx. 2,560 mm, +/- 46 kg
3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg)
6 pairs of pockets for plug-in stanchions
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX200 Sattelanhänger Megatrailer
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.245 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete vehicle inventory—including vehicles available immediately or on short notice—can be found on our website.
Extract from the equipment list. Full equipment details available on request.
Loading platform:
* Loading area with hardwood floor and rear chamfer approx. 1,000 mm x 8°
* 2 pairs of lashing rings (LC 5,000 daN)
* 1 pair of lashing rings (LC 10,000 daN)
* 6 pairs of outward-folding lashing rings (LC 5,000 daN)
* 2 pairs of outward-folding lashing rings (LC 10,000 daN)
* Cut-outs in the external frame of the loading area for attaching tension belts (LC 2,000 daN)
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles, air-suspended, disc brakes (approx. 377 mm), lift/lower function (ET 120)
* Axle tools
Tyres:
* Tyres 435/50 R 19.5 – brand at our discretion
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data.
Brake system:
* Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel structure:
* Steel construction made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel structure is automatically shot-blasted with a blast wheel machine after welding, with a second shot-blasting using corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection
* Final painting with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Paint finish tested in salt spray test as per ISO 9227-NSS
* Cavities sealed with special wax
Including the following additional equipment:
* Yellow-red air couplings at the galvanized front connection strip
* 4 wheel chocks with holders
* 2-inch kingpin
* Loading area with heavy-duty hardwood floor
* 1 spare wheel holder under the platform, right side in the direction of travel
* Galvanized folding supports under the chamfered loading area
* 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading area
* One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* Non-slip painted sand coating on the central frame member
* 1 INOX toolbox transversely under the platform, approx. 1,000 x 400 x 2,500 mm
* 6 pairs of WADER container locks in the loading platform for accommodating 1x 20' container, 2x 20' containers, or 1x 40' container
* 3 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm
* Rack for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall
Dodpfx Adoyvnfajdskl
* 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm
* Mount for aluminum drive-on ramps, transversely under the platform behind the axles
* 1 beacon light supplied l
Sizin için aramayı kolaylaştırıyoruz: "faymonville max trailer max510 tiefbett 2x12 t pa"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.















































































































































































































































































