Kullanılmış Müller-Mitteltal 21 To Luftgef. Tandemtieflader Mit 3 Mtr Rampen satın al (54.889)

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0 – Technical Specifications and Equipment Overview: ---- Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lifting and lowering function ---- Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye; height-adjustable drawbar ---- Lighting / Electrical System: * 15-pole electrical connector * LED lights, 12/24 V * RDÜ tire pressure monitoring system ---- General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Front of bulkhead and rear slope prepped for subsequent installation of container locks for 20" container transport * Version with 21 t GVW, reinforced chassis and axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Front of bulkhead prepped for subsequent installation of container locks * Bolted front wall made of smooth steel sheet * Split side walls made of trapezoidal profiled steel sheet, fold-down with center folding stake * Rear wall made of steel, slidable between the ramps (with storage holder at the front when not in use) * Bolted rear stakes ---- Load Securing: * Perforated outer frame, approx. 45° edge, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * Profifix lashing rail centrally aligned with the longitudinal axis for lashing up to LC 3000 daN * In the front and rear corners, each with 1 x 10 t lashing ring * Load securing package (Lasi-Paket): on each side, 2 x 8 t retractable lashing rings in the outer frame; various bores in the front wall and end cross member for 1.2 t lashing points ---- Ramps: * One-piece mechanical steel grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm (chassis) ---- Loading Heights: * Unladen: approx. 940 mm Nedpfx Abeq Dyu Uj Ajcu * Laden: approx. 910 mm ---- Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75 R17.5 ---- Paintwork: * Side wall paintwork in a custom RAL color shade (special or metallic paint not available); amendable up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black ---- Additional Information: * New vehicle with manufacturer’s warranty * Subject to alterations and prior sale * Sample images ---- Delivery Time: * Available from calendar week 29 / 2026

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: Nodpsl Tihxofx Ab Aocu * Air suspension with raising and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: * Available from week 29 / 2026

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector Ncsdpfxepk D D Ho Ab Aju * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) Ncodpfx Ajpk D Ncjb Aou * 15-pin electrical connector * LED tail lights ----General Fittings: * Jost landing gear at front * Fold-out stabilizer legs at rear * Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of the front wall for later installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift * Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a shade of black * Sideboard panels painted RAL 9010 pure white * Painting of side walls in other RAL color available for surcharge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: Ncedpfjl Th Nrsx Ab Aju * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm Ncsdpfx Abol Th Nco Aou ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet Nsdpfsvin Ucex Ab Ascu * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles Nedpfxevin T Sj Ab Ajcu ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL Ncjdpfxel Thyxo Ab Aou * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Ncsdpfx Asl Thymjb Aju ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing aggregate ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights 12/24 V * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Jost mechanical landing gear front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks at the central locking positions as well as 2 on the front wall * Steel pallet three-way tipper body with reinforced strong side walls (continuous upper side walls with internal pipe reinforcement - without center stanchions - foldable with side wall spring lifter) * Rear stanchions bolted * Combined steel swing doors at rear, asymmetrically split, two-leaf design, can be pivoted and locked at 270° (not foldable) and with additional pendulum frame for automatic rear wall opening during tipping process; locking by galvanized rotating bar lock at the back and central locking. Deactivation function for automatic rear wall feature when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * Each corner with 1 x 5 t lashing point * 4 x 3 t recessed lashing rings per side on the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: * Rear mounting rail for access ramps * 1 pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment for ramps installed below the loading area in the chassis, accessible from the rear ----Tires: * Tire size: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Side walls painted in a desired RAL color (special or metallic paints excluded) – color can be changed up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to prior sale and errors * Sample images Njdex Hm Rcjpfx Ab Ascu ----Delivery Time: * Available immediately from calendar week 29/2026

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange-type Drawbar Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal – no installation required on truck side ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on front right side of chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks installed at the central locking bearings and 2 units on the bulkhead * Steel pallet-drop, 3-way tipper superstructure with reinforced Strong sideboards (continuous upper side panels with internal reinforcement tube – without intermediate stanchions – foldable using board catch spring lifter) * Rear stanchions bolted * Combination steel double rear wing doors – asymmetrically split, swingable and lockable up to 270° (not foldable) – with additional pendulum frame for automatic tailgate opening during tipping; locking via galvanized rotary bolt at the rear and central locking system; deactivation function for the automatic rear wall function when tipping backwards with the wing door open * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point at each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Chassis: * Chassis constructed of fine-grain steel ----Ramps: * Rear fitting track for loading ramps * 1 pair of aluminium loading ramps approx. 3570 x 410 mm (load capacity 10 t per pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps embedded underneath the loading area at the rear of the chassis ----Tyres: * Tyres: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir and landing leg painted in a black tone * Body side boards painted in a RAL colour of your choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion ----Information: Ncedpox Hm Riofx Ab Aju * Reinforced superstructure with load securing certificate * Subject to errors and prior sale * Sample images ----Delivery Time: * Ready for immediate delivery ex works from week 29/2026

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Nodpfx Aeq Ra D Esb Aocu * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge Nodpol Th Hwefx Ab Ascu * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility Ncjdpfxsmi Tmae Ab Aju ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Tow Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Landing gear at the front * Fold-out stabilizer legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal steel sheet, central split, folding * Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use * Rear stakes bolted Njdpjv Eq Evjfx Ab Ajcu ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various holes in the front and end cross-members for 1.2 t lashing options * Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle, approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye and landing gear painted black * Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED lighting ----General Attachments: * Support winch at the front * Fold-out external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers * Bolted smooth steel bulkhead * Side walls made of trapezoidal steel sheet, split and foldable once in the center * Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead Ncedpfx Absv D Tcbe Aeu * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing eyes at 600 mm intervals * In each front and rear corner: one 6.3 t lashing ring * Multiple holes for 1.2 t lashing options in front and rear crossmember * Profifix lashing rail along centerline for lashing up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness) * Rear approach angle approximately 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, on the front wall exterior ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading area length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Provision at the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal steel side walls with fold-down spring-assisted gates * Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions Ncsdpervvfwefx Ab Asu ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to fit 3 t drop lashing brackets every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps * Side wall paintwork in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * available from calendar week

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brake System: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs -110 mm wide- with tandem compensation unit ----Drawbar / Flange eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * Rear fold-out supports (external) * Lateral underrun protection * Quarter plastic mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism * Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points * Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN Ncodpsl Th Hljfx Ab Aju ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised * Drop sides painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * Axles, springs, air tanks, flange towing eye and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 volt ----General Attachments: * Jost landing gear at the front Nsdpfx Ajmi Tcqeb Aecu * External folding supports at the rear * Plastic Toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Provision in front of bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center * Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use * Screw-mounted rear posts ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm * Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points ----Ramps: * Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized * ---Axles, air tank, flange towing eye, and landing gear painted in black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders Njdpfxol Th I Ao Ab Aocu * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency manual release for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower function and return-to-ride (RtR) valve ----Drawbar: * 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear) * Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required * 15-pin power plug * LED lighting 12 / 24 V * Removable rear LED rotating beacon ----General Attachments: * Side underrun protection * Swing-away supports at the rear of the chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle (FA) plastic quarter mudguards with splash protection * Rear axle (RA) straight galvanised steel skirts with splash protection * Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform) * 2 galvanised climbing steps on turntable, left and right ----Low loader platform: * Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads) ----Load Securing (Load-Securing Package includes): * 2 lashing rings (13.4 t) front left & right on bulkhead cross member * 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets per side, each with simultaneous 2 t lashing option * Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for retrofitting hydraulic ramp repositioning ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame ----Loading Height: * Loaded: approx. 910 mm +/- 20 mm with air suspension ----Paintwork: * Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted black Nsdpfx Abotplwio Aecu ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking system: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and adjustable height via tension spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on the trailer as an information tool (axle load display – front and rear separately) * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear ----General attachments: * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Stainless steel/polymer quarter mudguards with splash protection at the front axle * Straight galvanized steel mudflaps with splash protection at the rear axle * Tool box made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right-hand side * Compartment in the bogie with folding lid for accessories, 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low-bed platform: * ROBOT-welded anti-slip coating on the steel plate of the bogie platform (bead welds left proud) ----Load securing (load securing package consisting of): * 2 lashing eyes (13.4 t) front left and right at the front wall support * 1 pair of UVV lashing rings (13.4 t) at front and rear, plus 3 pairs per side of UVV lashing rings (10 t) – swiveling and lowerable, loadable in all directions and integrated into the outer frame * 3 stake pockets per side, each with a 2 t lashing option * Profifix lashing rail along the longitudinal centerline, in flat section, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear bevel) * Widening planks stored in the middle of the loading area ----Ramps: * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way valve block for possible retrofitting of hydraulically shifting ramps ----Excavator arm trough: Ncedpjxptn Refx Ab Aeu * Continuous excavator arm trough from rear axle to end support (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN integrated in the excavator arm trough at the longitudinal frame ----Loading height: * Approx. 910 mm, +/- 20 mm with air suspension, loaded ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports, and ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector Njdpfsl Th Nnox Ab Ascu ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted Nedpfx Aoq Dyvyjb Ajcu * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf