Alçak yükleyici

Faymonville MAX Trailer 4-Achs-Tele-Semi-Rampen-nlla

Gooseneck:
- Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring

Extendable Loading Platform:
- Loading platform in extendable design with rear taper approx. 1,000 mm x 8°
- 5 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
- c. 48 mm thick hardwood flooring, over the axles with checker plate covering

Detachable Two-Part Ramps:
- One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable
- Maximum load per pair: 40,000 kg

Landing Legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)

Axles and Tyres:
- BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function
- The trailing steering axles can be locked electromagnetically via reverse gear or manually
- Axle tools
Hsdpfeh Etf Rjx Aacjfn
- Tyres: 235/75 R 17.5

Brake System:
- Brake system according to EU regulations with EBS-E (4S3M)

Steel Construction:
- Steel construction made of high-tensile fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)

Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat finish in single-colour Novagrau

Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets

Accessories Included:
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with holder in front of the headboard
- Yellow-red air couplings at the galvanized front terminal strip
- 4 chocks with holder at the front wall
- Mounting at the rear area of the gooseneck for ALU drive-on ramps
- Galvanized folding supports under the taper of the loading platform
- Bracket for a rotating beacon
- Cover plates to bridge the gap between ramps and loading platform
- White reflector tape to EU specification on the sides, red at rear and on extension
- Electro-hydraulic power pack
- On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet
- Ramp control valves installed on the right trailer side
- One mudguard at the rear of the trailer
- Instruction manual and description on USB stick
- ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm
- The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm)
- 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Extensions, galvanized, extendable by approx. 230 mm per side
- Lift axle on the front axle with control
- Square climbing rails 20 x 20 mm
- Central lubrication system BEKAMAX
- F

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.