Kullanılmış Müller-Mitteltal Damper 3 Taraf satın al (261)

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic suspension Fpjdpfx Agox Ipbgj Tob * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear frame * Mechanically adjustable warning panel sets at the front and rear * Front axle with enclosed plastic mudguards and rear axle with straight galvanized steel mudflaps, each with spray protection * Reflective contour tape along the sides and rear * Hinged (hot-dip galvanized) cover for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), each with lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope) * Widening planks stored in the center of the loading platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 12 / 2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2025, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Extension Side Walls + Aluminium Ramps * Reference number for inquiries: 11532 – available immediately * NEW VEHICLE in RAL 9016 traffic white Fsdpfewnvt Aex Ag Tspb * 5m x 2.42m x 0.5m loading area + 0.5m steel side extensions, three-sided swinging sides, welded side panels, sides can swing, fold down, and are removable, painted, with spring-assist and central locking (locking mechanism galvanized) * Two-step access ladder in front of the bulkhead (galvanized) * Lockable compartment under the tipping platform for loading ramp * Aluminium ramps, pair, 8t, 3.57m long * 2 LED reversing lights at the rear * Chassis hot-dip galvanized * 4 UVV tie-down rings LC 5000daN at front and rear + 8 recessed and foldable lashing points LC 3000daN fitted in the tipper floor (centrally positioned) * Side marker lights with indicator control * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye Ø 40mm * Wide tires 385/55R 19.5 (set of 4), BPW axles, parabolic springs * LED lighting system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring system * We are Müller-Mitteltal authorized dealer * Lease-purchase example from our partner MMV Leasing: EUR 555,- per month net for 60 months with no down payment and 0 EUR residual value * Other terms available with or without down payment/residual value Our opening hours: Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside our business hours, appointments can be arranged We speak German, English, Polish, French * WhatsApp Leasing, financing, trade-in possible

Durumu: kullanılmış, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2018, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 490 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.550 mm, Müller Mitteltal KA-TA-R 11.9t * Tandem three-way tipper * Tipper trailer * Truck trailer * One owner * First registration: 25.10.2018 * Next inspection (TÜV): 12/2026 * Gross vehicle weight: 11,900 kg * Unladen weight: 3,060 kg * Payload: 8,840 kg * Overall dimensions: 7,150 mm x 2,550 mm x 1,550 mm * Internal dimensions: 5,000 mm x 2,400 mm x 490 mm * Continuously adjustable drawbar eye height Fpodpfxex Ibl Do Ag Teb * All supply lines to the towing vehicle protected inside a hot-dip galvanized drawbar * Chassis hot-dip galvanized * Drop sides laser welded from fine-grain steel * Fixed front wall made of smooth sheet * Upper side walls with internal tube reinforcement and spring-assisted * Side and rear walls pendulum, foldable and removable (central locking) * Brake system according to EC Directive 71/320/EEC ff., with ABS 2S/2M and spring-actuated parking brake * Leaf suspension * Stake pocket * Hydraulic three-way tipping system * Recessed lashing points in platform floor * Supports * Support leg * Tires: 235/75R17.5 143 J * Sidewall spring ATTENTION! PLEASE READ! We expressly reserve the right for prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspecting the trailer so the buyer can be fully informed about its condition and suitability. Viewings and inspections are possible and expressly encouraged at any time by appointment! Images similar; equipment may include optional extras available at additional cost. Specified internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty Fedpoxf Sk Njfx Ag Tepb * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2025, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * NEW VEHICLE, never registered * Immediately available Fpjdpfxox I T Aho Ag Teb * Inquiry number: 11555 * Tire pressure monitoring system (RDÜ) * EBS braking system, drum brakes, BPW axle, parabolic leaf springs * Front support winch, spring-assisted rear square tube supports with base plates, safety locking pins for various support heights * Drawbar with 40 mm towing eye (height-adjustable, mm) * 15-pin power connector * LED lighting * 315/80 R 22.5 tires, full length steel mudguards * Swiveling cable drum assembly * Steel drum axle with 76 mm diameter, centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide * For drum diameter 800–3,000 mm x (1,700 mm width between drum arms) * Includes tension lock for drum safety at the load arm ends and a central claw lock for securing the drum assembly to the chassis * Motor-powered hydraulic push and pull cylinders with pipe rupture safety device. Control valve with automatic zero position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Motor-hydraulic drum drive with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive. * Additionally, hydraulic pump unit with petrol engine and hand starter, 13 HP with gear pump (150 bar), pressure supply optionally via truck hydraulics or the pump unit by switching the connection lines * Alternatively, a 6.5 HP diesel engine at 150 bar instead of petrol engine * 2 LED work lights mounted laterally on the trailer (suitable for 12V and 24V), switchable from the truck (truck-side installation required, connected on PIN 11) * Toolbox approx. 500 x 350 x 400 mm * Chassis with drawbar hot-dip galvanized * Advertising panel integrated into the side guard, exterior polyester coated in RAL 9016 traffic white ---- * We are an official MüllerMitteltal dealer! * Example finance lease offer from our partner FM LeasingPartner: e.g. €698 per month net, no down payment, and "€0" final installment over a 60-month term. * Contact us for a quote! * Trade-in of your current vehicle possible! ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside these hours, appointments can be arranged * We speak German, English, Russian, Polish, French ----

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems Fodpfx Agex Ipbmj Tepb * 15-pin 24V power plug * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear Fsdpfx Agjxf Skpj Tspb ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: Fpjdpfxexf Sk Aj Ag Tsb * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps Fpodpfxexf Skvo Ag Teb ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits front and rear * Front: closed plastic mudguards; rear: straight galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear Fpjdox Ipa Nspfx Ag Tob * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV rotary and lowering lashing rings, loadable in any direction and integrated into outer frame – corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear bevel) * Widening planks stored in the center of the loading area * Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm access slope) * Chassis, turntable, tow bar, and ramps are hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical gross weight up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 12/2026 * Sample image

Durumu: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Closed plastic mudguards, front & rear axle * Closed side underrun protection * Rear underrun guard bolted * Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm Fodpox Ipa Ajfx Ag Tepb * Foldable A-sign at rear * Rear impact protection buffers ----Electrics / lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container guidance surface / tipping frame: * External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment * To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock * The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside * Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking components (without top coat) * Turntable, air reservoir, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * Suitable for container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Sample images (actual vehicle photos may vary due to optional equipment) ----Delivery time: * Available from CW 24/2026

Durumu: yeni, azami yük ağırlığı: 10.980 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Towing Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrical / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no in-truck installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable rear LED beacon ----General Attachments: * Front support winch * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Fold-down steel side panels – trapezoidal profile – with drop-side lifting assist * Steel rear panel, retractable between the ramps – storage bracket mounted inside in front of the bulkhead when not in use * Bolted rear stanchions * Rear inclined approach approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the ramps * On the inclined approach and on the outside of the low-bed platform (from bulkhead to end crossmember): each with 12 mm thick and 210 mm wide rubber strips ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various boreholes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid approach ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm) Fsdpfxex Ipbas Ag Tjpb ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and ramps are hot-dip galvanized * Axles, springs, air tanks, and flange towing eye are coated in a black shade * Side panels painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate * Errors and interim sale excepted * New vehicle with manufacturer’s warranty * Sample photos (actual vehicle may differ due to special equipment) ----Delivery time: Vehicle is available from calendar week 10/2026

Durumu: yeni, azami yük ağırlığı: 10.980 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brake: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon at the rear ----General Attachments: * Support winch at the front * External, hot-dip galvanized foldable support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm installed outside front right on the front wall * Lateral underrun protection * Plastic quarter mudguards ----Low-bed Platform: * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, foldable with board spring lifter * Steel rear wall, insertable between the ramps – holder for storage when not in use placed inside in front of the bulkhead * Screw-mounted rear stanchions * Rear approach ramp approx. 860 mm ----Flooring: * 50 mm thick softwood floor * 12 mm thick and 270 mm wide rubber strip on the inner side of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally along the low-bed platform (from bulkhead to end crossmember) ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm * 3 t lashing rings can be installed every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various boreholes in bulkhead and end crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person use, approx. 2,750 x 870 mm (can be retracted to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange tow eye painted in a black shade * Side walls painted in RAL 9010 pure white ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and intermediate sale reserved * New vehicle with manufacturer's warranty * Sample images (pictures may vary from the actual vehicle due to special equipment) ----Delivery Time: Vehicle available from calendar week 10/2026 Fpsdjx Ipapjpfx Ag Tob

Durumu: yeni, azami yük ağırlığı: 20.200 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9-ton BPW Eco axles * Air suspension with lifting and lowering system including RTR function * 1st axle liftable * Last axle configured as a trailing steering axle with electro-pneumatic steering lock actuated via reverse gear PIN (locking the trailing axle from the towing vehicle for maneuvering purposes—no installation required on the truck—assigned to PIN 10 in the 15-pin connector; for maneuvering only, not for use on public roads) * SmartBoard control unit serving as an info tool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, requires no installation on the truck side * Fixed center drawbar with 50 mm flange eye (loaded height 900 mm, height adjustment possible at front plate) * Mechanical support winch at the front, mechanical swing-down supports at the rear on chassis * Mechanically adjustable warning sign package front and rear * Toolboxes made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm, mounted right side * Hydraulic flow divider * Continuous sidewalls (without center stanchion) running to the drive-on slope * Fold-down rear stanchions * Steel rear wall inserted in front of rear stanchions * 15-pin power connector * LED rear lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall, plug-in design * Perforated outer frame, approx. 45-degree angled edge with fixtures for mounting 3-ton folding lashing brackets * Each corner equipped with 1 x 10-ton lashing point plus 2 additional 10-ton and 3 x 6.3-ton lashing rings on each side * Various holes in front and rear cross members for 1.2-ton lashing options * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for optional retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, mechanical rear supports, drive-on ramps, rear tailgate are hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front support winch painted in black Fpodpfer Dpz Ajx Ag Tjb * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Available from calendar week 13/2026 * Sample images (vehicle shown may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30,0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer rear * Side underrun protection * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning boards front and rear Fpsdpfxex Ipavo Ag Teb * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour markings on sides and rear * Folding (hot-dip galvanized) lid for tool box on the turntable platform * Multi-voltage system * LED rear lights * Removable revolving beacon at rear * Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out supports for 3 m total width (not on rear slope) * Extension planks stored in center of loading area * Excavator arm tray over rear axle up to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm tray) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing bar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- a gross technical weight of 30,000 kg is possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 12/2026 * Sample image

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: Fpjdpfxsq Ra D Ej Ag Tob * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic quarter mudguards * Plastic toolbox at the front right outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: * Loading area: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop-side panels made of trapezoidal-profiled sheet steel, foldable with sideboard spring assist * Rear wall slidably mounted between ramp brackets, when not in use stows inside in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option for installation of 3 t foldable lashing rings every 600 mm * In each corner front and rear: 1 x 6.3 t lashing point * Various drillings in front and rear traverse for 1.2 t lashing option ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes, and drive-on ramps * Sides painted in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery Time: Available from CW (calendar week)

Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering function * Preparation in front of the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Drawbar with 50 mm flange eye and height-adjustable tow bar * Jost landing gear at the front * Outboard folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, located right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * 21 ton GVW version with reinforced chassis and axles * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped version * Fittings in front of the bulkhead for retrofitting container locks Fpedpfsl Tihxjx Ag Tob * Bolted bulkhead made of smooth sheet metal * Split side walls made of profiled trapezoidal steel sheet, foldable, with folding post in the center * Rear wall made of steel, can be slid in between the ramps; storage bracket inside front bulkhead when not in use * Rear stakes bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring in each corner, front and rear * Load securing package includes 2 x 8 t retractable lashing rings on each side in the outer frame, various holes in front and rear cross members for 1.2 t securing options * One-piece mechanical grating ramps with spring balancer for single-person operation, approx. 3,000 x 620 mm (can be collapsed down to 20 mm) * Rear run-up slope approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black shade * Loading height (unladen) approx. 940 mm; (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Sideboard color can be freely selected up to approx. 2 weeks before production date (no metallic or special colors) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 15 / 2026

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Fittings: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted on the front right side of the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel sheet, foldable, fitted with drop side lift assist * Steel rear wall, can be stored between the ramp holders, when not in use, inside in front of the front wall * Rear stanchions bolted ----Load Securing: Fedpfx Ageq Ra D No Tepb * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Each front and rear corner fitted with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, dimensions approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and loading ramps * Body side panels painted in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: Available from calendar week

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Fodpfsrvvfwjx Ag Tjpb * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Drawbar adjustable in height by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Load Area: * Load length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Front wall bolted from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with spring lifter * Rear wall made of steel, can be slid in between the ramp holders, stored in front when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, lashing force 2 t every 480 mm * Installation of foldable lashing rings with 3 t rating every 600 mm possible * In each corner front and rear: 1 x 6.3 t lashing point * Various bores in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, rear stakes, and ramps hot-dip galvanized * Drop side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ----Notes: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: Available from CW (calendar week)

Durumu: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Tool box, galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED tail lights * Reinforcement package for drilling rig transport on chassis (loading height +20 mm) * 50 mm softwood flooring, clamped version * Fixture in front of bulkhead for retrofitting container locks * Bolted smooth plate steel bulkhead * Fold-down, trapezoidal-profile steel sidewalls with drop side spring assist * Removable steel tailgate insertable between ramps, holder inside front bulkhead when not in use * Bolted rear stakes Fodpfxepk D Ncs Ag Tspb * Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm * Optionally, 3 t flush lashing rings can be installed every 600 mm * In each front and rear corner: 1 x 10 t lashing point, various holes in front and end cross-members for 1.2 t tie-down possibility * One-piece mechanical grid ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, rear tailgate, rear folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Sidewalls painted in RAL 9010 pure white * Custom color for sidewalls in any RAL shade available for an extra charge * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted Fodpol Th Eyjfx Ag Tjpb ----Delivery Time: * Available immediately ex Egestorf on the A7

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front: closed plastic mudguards; Rear: straight, galvanized steel fenders each with spray protection Fpodpfxol Thxdo Ag Tsb * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for total width of 3 m (not at rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator trough) * Hydraulically operated one-piece ramps (approx. 3,000 x 720 mm) * Mechanical side-shifting of ramps * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (includes 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 09/2026

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing aggregate * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox mounted front right outside on bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and access ramps * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring lifter * Steel rear wall, retractable between the ramps, storage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, angled by approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing rings every 600 mm possible; in each corner front and rear one 6.3 t lashing ring; various boreholes in front and end crossbar for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach slope at rear approx. 860 mm Fpodpfx Agjxglibj Teb * -- Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate -- * Side wall color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 08/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * Load securing package (LASI package) * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 2 x 12-ton Gigant axles Fsdpol Thwcefx Ag Topb * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel, mounted right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized steel sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact bumpers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame section (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in bogie area * Suitable for roll-off container transport, container length 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pivoting stops * 3 pairs of 10-ton UVV lashing rings on sides for connecting tensioning elements for positive and friction-locked load securing, 4 lashing brackets in cloverleaf design (side), 1 pair of 13.4-ton UVV lashing rings at front, load securing certificate to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in ramp run area * Mechanical drop supports at rear * 1 pair aluminum drive-on ramps (10.6 tons/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment, accessible from the rear) * 235/75 R 17.5 twin tires * 4,360 kg unladen weight * Permissible total weight technically up to 20,000 kg * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * Load securing package (LASI package) * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders Fpodpfxsl Thv Re Ag Teb * 2 x 12 t Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment * Toolbox made of powder-coated sheet steel, right side * Side and rear contour tape, reflective * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Sheet steel floor with roller recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point twist lock system and mechanical insertable front stop blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and frictional load securing, 4 cloverleaf-type lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front, load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in the ramp area of the traversing slope * Mechanical drop supports at the rear * 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) * 235/75 R 17.5 twin tires * 4,360 kg unladen weight * Permissible gross weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf