Kullanılmış Müller Mitteltal Sf 32 Bm/Bs Mit Liebherr satın al (13.048)

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel Bsdpjy Ngzyefx Ah Eeli ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: Blsdpfx Ahex Nli No Eei * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm screw-type coupling eye (height adjustable mm) ----Electrics / Lighting: Bedpeu I Iqlefx Ah Eoli * 15-pin power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear, with base plate and safety lock pins for various support heights * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, suitable for use as an advertising surface * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms: 1,700 mm, with clamp lock for securing the drum at the support arm ends as well as central claw lock for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of high-grade polyamide centering cones, step-shaped ----Chassis: * Frame made of torsion-resistant square tubing and cross beams ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9,9 ML: ----Fren Sistemi: * EBS fren sistemi * Kampanalı fren * Yaylı silindirler için acil bırakma tertibatı ----Aks: * BPW aksı ----Süspansiyon: * Parabolik yaylar ----Çeki Borusu / Flanşlı Çeki Halkası: * 40 mm cıvatalı ve yükseklik ayarlı çeki borusu ----Elektrik / Aydınlatma: * 15 pinli elektrik fişi * LED aydınlatma * Yanlarda LED flaşörlü işaret lambaları * RDÜ lastik basınç izleme sistemi ----Genel Ekipmanlar: * Ön destek makarası * Arka kısımda zemin plakalı ve farklı yüksekliklerde emniyet pimli yay destekli dörtgen destekler * Çamurluklar kapalı, sacdan yapılmış ve sıçrama önleyicili * Yan koruma kapalı, reklam alanı olarak kullanılabilir * 500 x 350 x 400 mm ebatlarında, taban kaplamalı plastik alet kutusu (yatay monte edilmiştir) ----Üst Yapı: * Döner tamburlu üstyapı, tambur kolları arasında 1.700 mm ölçüsünde serbest genişlik, taşıyıcı kolların uçlarında tambur sabitleme kelepçesiyle ve şasiye merkezi yerleştirilmiş pençe kilidiyle kilitleme * Motor-hidrolik tambur tahriki, yağ motorlu * Valfler ve kaydırılabilir, kauçuk kaplamalı tahrik silindirleri * Tambur tahriki için hidrolik hız regülatörü ve fren * 76 mm çapında çelik tambur mili, merkezleme ve döner uçlara sahip * 1 çift kademeli yerleştirilmiş poliamid merkezleme konisi ----Şasi: * Burulmaya dirençli dörtgen borudan ve enine traverslerden yapılmış şasi ----Pompa Ünitesi: * Loncin benzinli motorlu hidrolik pompa ünitesi, elle ve elektrikli marşlı * Yakıt deposu ve el marşı * 13 HP, dişli pompa (150 bar) ----Lastik: * 315/80 R 22,5 ----Boş Ağırlık: * Boş ağırlık: 2.690 kg ----Boya: * Araç sıcak daldırma galvanizli ----Bilgiler: * Sıfır araç, tam üretici garantili * Hatalar ve ara satış hakkı saklıdır ----Teslimat Süresi: Bljdpfsu I Iqfox Ah Eji * Tahmini 41. haftadan itibaren, 2026 teslimatlı

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: ----Braking System: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Drawbar Eye: * Drawbar with 40 mm bolted drawbar eye (height-adjustable, mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General Attachments: Bodpfx Aju I Iq Eoh Ejli * Front landing leg * Rear spring-assisted square tube supports with base plate and safety locking pins for adjustable support heights * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, usable as an advertising surface * Plastic toolbox with floor liner (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure * Clear internal width between drum arms 1,700 mm * Locking latch for drum securing at carrier arm ends and central pawl lock connecting the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubberized drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 1 pair stepped centering cones made of polyamide ----Chassis: * Chassis constructed from torsion-resistant box sections and cross members ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Further Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles Blsdpfxexglh Rs Ah Eei ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right outside of the front wall * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter * Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use * Removable rear stanchions (bolted) ----Load securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Platform side wall color in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost ----Info: * --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 30/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope Blodpfey Ngz Hex Ah Eoi ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flange towing eye Bsdpev D Tcbofx Ah Esli ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED lighting ----General Attachments: * Support winch at the front * Fold-out external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers * Bolted smooth steel bulkhead * Side walls made of trapezoidal steel sheet, split and foldable once in the center * Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing eyes at 600 mm intervals * In each front and rear corner: one 6.3 t lashing ring * Multiple holes for 1.2 t lashing options in front and rear crossmember * Profifix lashing rail along centerline for lashing up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness) * Rear approach angle approximately 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9,9 ML: ----Fren sistemi: * EBS fren sistemi * Kampana fren * Yaylı fren silindirleri için acil çözme mekanizması ----Aks: * BPW aks ----Süspansiyon: * Parabolik yaylar ----Çeki borusu / Flanş çeki göz: * 40 mm vidalı çeki gözlü ayarlanabilir yükseklikte çeki borusu ----Elektrik / Aydınlatma: * 15 pinli güç fişi Bledpfx Aju I Iqrjh Esi * LED aydınlatma * Yanlarda yanıp sönen LED ikaz lambaları * RDÜ lastik basıncı izleme sistemi ----Genel donanım parçaları: * Önde destek makarası * Arkada yay destekli, taban plakalı ve güvenlik pimli kare profil destek ayakları; farklı yüksekliklerde sabitleme imkanı * Sacdan yapılmış kapalı çamurluklar ve sıçrama koruması * Kapalı yan koruma, reklam alanı olarak kullanılabilir * Alt tabanlı plastik alet kutusu (yatay monte edilen), yaklaşık 500 x 350 x 400 mm ----Üst yapı: * Döner kablo makara üst yapısı: tambur kolları arası iç genişlik 1.700 mm; taşıyıcı kolların uçlarında tambur sabitleme kilidi ve şasiye merkezi pençe kilidi ile üst yapının sabitlenmesi * Motorlu hidrolik tambur tahriki, yağ motorlu * Valfler ve kaydırılabilir, kauçuk kaplı tahrik makaraları * Tambur tahriki için hidrolik hız regülatörü ve fren * 76 mm çapında çelik tambur mili, merkezleme ve döner uçlar * Kademeli olarak yerleştirilmiş 1 çift poliamid merkezleme konisi ----Şasi: * Burulmaya karşı dirençli kare profillerden ve enine traverslerden üretilmiş şasi ----Pompa ünitesi: * Loncin benzinli motorlu hidrolik pompa ünitesi, el ve elektrikli çalıştırma dahil * Yakıt deposu ve el ile çalıştırma sistemi * 13 HP, dişli pompa ile (150 bar) ----Lastikler: * 315/80 R 22,5 ----Boş ağırlık: * 2.690 kg boş ağırlık ----Boya: * Araç sıcak daldırma galvanizli ----Bilgi: * Tam üretici garantili yeni araç * Yanlışlık ve ara satış hakkı saklıdır ----Teslimat süresi: * Yaklaşık 41. haftadan / 2026 itibariyle teslim edilebilir

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles Blodjykx Nqepfx Ah Eei * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: Bjdpfxsx Nlkaj Ah Esli * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) Bedpfxsw Ndr Uj Ah Eeli * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles Bljdpfox Nlkgex Ah Eei ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights Bsdpfx Ahoxl Nkgj Ejli * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Durum: ikinci el, azami yük ağırlığı: 27.300 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 11.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Donanım: ABS, * Gooseneck with storage boxes * Self-steering axles * Hydraulic loading ramps * Widenable lowbed ----* Tire size: 235/75R17.5 * Gross vehicle weight: 42,000 kg * Curb weight: 8,700 kg * Overall length: 13,150 mm * Next safety inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertising and various stickers have been digitally removed.-----We are happy to assist you with all formalities involved in the purchase of a vehicle—simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge:----Trade-in of your old vehicle TÜV/safety inspection Blsdpeza Rlijfx Ah Eei Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- Your VTS Team

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0 – Technical Specifications and Equipment Overview: ---- Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lifting and lowering function ---- Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye; height-adjustable drawbar ---- Lighting / Electrical System: * 15-pole electrical connector * LED lights, 12/24 V * RDÜ tire pressure monitoring system ---- General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Front of bulkhead and rear slope prepped for subsequent installation of container locks for 20" container transport * Version with 21 t GVW, reinforced chassis and axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Front of bulkhead prepped for subsequent installation of container locks * Bolted front wall made of smooth steel sheet * Split side walls made of trapezoidal profiled steel sheet, fold-down with center folding stake * Rear wall made of steel, slidable between the ramps (with storage holder at the front when not in use) * Bolted rear stakes ---- Load Securing: * Perforated outer frame, approx. 45° edge, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * Profifix lashing rail centrally aligned with the longitudinal axis for lashing up to LC 3000 daN * In the front and rear corners, each with 1 x 10 t lashing ring * Load securing package (Lasi-Paket): on each side, 2 x 8 t retractable lashing rings in the outer frame; various bores in the front wall and end cross member for 1.2 t lashing points ---- Ramps: * One-piece mechanical steel grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm (chassis) ---- Loading Heights: * Unladen: approx. 940 mm * Laden: approx. 910 mm ---- Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75 R17.5 ---- Paintwork: * Side wall paintwork in a custom RAL color shade (special or metallic paint not available); amendable up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black ---- Additional Information: * New vehicle with manufacturer’s warranty Bsdpoq Dyu Uofx Ah Eeli * Subject to alterations and prior sale * Sample images ---- Delivery Time: * Available from calendar week 29 / 2026

Durum: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal Düşük Yükleyici, Jant Kovuklu TS 3 RM ML 30,0 - 2 Yükseklik ve Rampa Özellikli * 12 t’den 18 t’ye artırılmış Kingpin yükü dâhildir. Kingpin aşağıdaki şekilde monte edilmiştir: İkinci kingpin pozisyonu 2”, kingpin kröpfung (kıvrım) 2.750 mm’ye kadar dâhil. Arkada serbest döndürme yarıçapı yaklaşık 2.400 mm (minimum 150 mm boşluk tavsiye edilir). Öne doğru serbest döndürme yarıçapı 1.480 mm veya yedek lastikle 1.570 mm. Not: Çekici araç ile yeterli boşluğun müşteri tarafından sağlanması gerekmektedir. * Ön ve arka alt jant kovukları için uzatılabilir parçalar (205 mm derinlik). Jant kovukları için toplam 6 adet yerleştirme kirişi. Kiriş tutucu olarak kabul edilen ALU basınçlı hava tankı (kod 09.112) çelik yerine. * Smartboard kumanda kutusu, treyler üzerinde bilgi aracı olarak monte edilmiş ve basınç sensörleri ile toplam dingil yükünü ekranda gösterecek şekilde ayarlanmıştır. Gösterge, ya kumanda kutusu üzerinden ya da EBS hava süspansiyon sistemiyle (üreticiye bağlı olarak) kamyondan izlenebilir. * SP-Kombi-Paket: Takım kutusu, 45° köşeli galvanizli çelik sacdan imal, ek olarak RAL 9006 beyaz alüminyum toz boya kaplama, platformda monte B=2.480 x Y=500 mm üst kapaklı, yan kapaklı ve eğimli, alüminyum yan duvarlar aşağı katlanabilir (500 mm yüksek), alüminyum arka duvar 150 mm yüksekliğinde çıkartılabilir, iç ve dış alüminyum yan paneller RAL 9006 beyaz alüminyum boya kaplı. Dahil: Katlanabilir ve çıkarılabilir arka dikmeler, galvanizli (boyasız). Vidalanmış ön yapı dâhil. Ön kiriştan kröpfung’a uzunluk: 3.935 mm; kröpfung ölçüsü 2.450 mm veya 2.750 mm’de öne doğru döndürme yarıçapı: yaklaşık 1.750 veya 1.480 mm. * Ön kirişte gömme 2 adet konteyner kilidi bulunur * Sadel platformun altında 3 adet yerleştirme şaftı, tercihe göre alüminyum rampa veya jant kovuk kapama için tahta tutmak için * Katlanır/uzatılabilir konsollar (galvanizli) ve genişletme için ahşap çıtalar dâhil (arka eğim hariç), çıta tutucu platformda (yükün maksimum genişliği 2.500 mm) Bledpfx Ahey R Ipuo Eoi * Ön ve arka uyarı paketli ikinci LED pozisyon lambası (Çift aydınlatma), sadece uyarı paketiyle birlikte * Treylerin arka tarafında 2 adet LED geri vites farı, geri vitesle etkinleşir (12 V ve 24 V’a uygun), maksimum 2 adet ek olarak kullanılabilir * Arka tarafta 7 pinli priz, fazla uzunluk aydınlatması için (arka lamba 58 R) ve şasi ucu için * Rampaların iç çıtasında, sol ve sağ yükleme eğiminde (yaklaşık 860 mm uzunluğunda) lastik kaplama şeritler, tek parça rampada iç çıta üzerinde lastik kaplama * Otomatik merkezi yağlama sistemi, pompalı (24V), gres tankı ve entegre treyler kontrolü ile - rampalar hariç (direksiyonlu araçlarda platform dağıtıcısına bağlantı dâhil) Not: Sadece 24V aydınlatma sistemli çekici araçlarda kullanılabilir! Ara satışı ve hata yapma hakkı saklıdır! Satış yalnızca genel satış şartlarımız (AGB) ile yapılır Önemli Bilgilendirme: Tüm detaylar dikkatlice kontrol edilmekle birlikte, bazen sistemler arası aktarım hatalarından dolayı yanlış bilgi oluşabilmektedir. Bu nedenle, tüm bilgiler taahhüt niteliği taşımamakta olup hukuki bağlayıcılığı yoktur. Yasal Uyarı: Bu ilan, BGB’nin 145. maddesi anlamında bir teklif değildir. Sadece sözleşme öncesi bilgi içermektedir ve verilen detaylar garanti edilmemektedir, taahhüt edilmiş özellikler değildir.

Durum: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights Blodpfjtr Sucsx Ah Eei ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Durum: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost Bjdpetr St Usfx Ah Esli ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, on the front wall exterior ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading area length: 6.27 m * Suitable for container transport Bodervvfwopfx Ah Esli * 50 mm softwood flooring * Provision at the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal steel side walls with fold-down spring-assisted gates * Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to fit 3 t drop lashing brackets every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps * Side wall paintwork in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * available from calendar week

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting Bedpotpta Defx Ah Ejli * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Drawbar adjustable in height by approx. 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * JOST mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking locations and 2 on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * Steel pallet 3-way tipper body with continuous side walls reinforced on top with inner tubing – without central stanchions, foldable with drop side spring assist * Removable bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be pivoted and locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with the wing doors open * 4 mm steel floor plate made of fine-grain steel * Mounting rail at rear for loading ramps ----Load securing: Bedpel Th Htefx Ah Esli * 1 x 5 t lashing ring in each corner and 4 x 3 t recessed lashing eyes per side in the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for ramps integrated underneath cargo area in the chassis, accessible from the rear ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports galvanised * Axles, springs, air tank and landing gear painted in a shade of black * Sideboards painted RAL 9010 pure white * Other RAL colours for the sidewalls available at additional cost ----Information: * Reinforced body with load securing certificate * Vehicle has a one-day registration (not in use) * Subject to prior sale and errors excepted ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: Blsdpfxjq Dyvvo Ah Eoi ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balance mechanism ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, 300 mm range * Drawbar extension of 250 mm (total length 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted flat sheet steel bulkhead * Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option to install 3 t flip lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities * Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall * Sidewall color in RAL 9010 pure white * Painting of sidewalls in a different RAL color available at additional cost ----Information: * --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 29/2026

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brake System: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: Blodpfx Ael Th Hloh Eoi * Parabolic springs -110 mm wide- with tandem compensation unit ----Drawbar / Flange eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * Rear fold-out supports (external) * Lateral underrun protection * Quarter plastic mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism * Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points * Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised * Drop sides painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * Axles, springs, air tanks, flange towing eye and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Fittings: * Jost landing gear at front * Fold-out stabilizer legs at rear * Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of the front wall for later installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift * Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm Blodpspk D Ncsfx Ah Eji ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a shade of black * Sideboard panels painted RAL 9010 pure white * Painting of side walls in other RAL color available for surcharge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf