Kullanılmış Valtra T203 D Ac 14.33 Front Hydr. satın al (49.426)

Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency Release Device for Spring-Loaded Cylinders * Drum Brakes ----Axles: * 3 x 11 t BPW Eco Plus Axles * Rear axle with steered trailing axle and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR-valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gear at the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards Iedpsl Tnvgjfx Ag Netf * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high side aluminum drop sides (RAL 9010 pure white) foldable and removable on the fifth wheel platform * Rear wall -150 mm- pluggable * Rear slant on the fifth wheel platform to the low bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber flooring and low bed platform with 60 mm timber flooring * Checker plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 meters total width, but not in the rear slant (extension planks available and stored on the platform) * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each, and 3 x 5 t lashing bars per side in the outer frame * On the low bed platform, 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivotable and lowerable, recessed into the outer frame * 2 x 6.4 t lashing points per side, and 1 lashing ring in the excavator arm trough at the rear * 2 x container locks directly after the cranked section in the low bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the rear crossbeam with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for the customer's retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the entry slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l up to 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm entry slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may contain equipment features not included in the offered vehicle ----Delivery Time: * Available from calendar week 26/2026

Durumu: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Ijdpfxsxrx Nls Ag Notf Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Durumu: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck Itjdpfxswviwkj Ag Nef - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durumu: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side Iedpfehlz S Nox Ag Njtf • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Durumu: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer Isdpfsl Sl Izox Ag Nstf High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durumu: kullanılmış, kilometre: 767.130 km, güç: 353 kW (479,95 bg), ilk tescil: 09/2014, lastik boyutu: 315/80R22,5, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.800 mm, renk: mavi, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2014, Donanım: buzdolabı, elektrikli cam sistemi, klima, Tyre size: 315/80R22.5 Front axle: Suspension: Leaf suspension Rear axle: Dual tyres; Suspension: Air suspension Itedeuc Au Sopfx Ag Nef Drive: Wheel Gross vehicle weight (GVW): 19,000 kg Engine brand: Mercedes-Benz = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off)

Durumu: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Total weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: approx. 10,410mm total, gooseneck approx. 2,490mm, loading platform including rear incline approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information Plus pre-shipping / handling from stock location 26639 Wiesmoor: €1,280.00 net Hire purchase offer: Term 48 months, down payment only VAT, residual value 40% Monthly rate EUR 759.00 Chassis, Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Iedpfsvv D Ixex Ag Nstf 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for axles 1 and 2 with anti-splash mudflaps behind each axle, Anti-splash mudflaps before and after axles 3 and 4 Excavator arm recess over rear axles extending to rear, approx. 1,800mm long, approx. 650mm wide and approx. 150mm deep 2 pairs of lashing holes rated to 5t each, in the excavator arm recess on the side of the longitudinal frame approx. 300mm from the front and approx. 200mm before rear incline 1 lockable plastic toolbox, w=600 / h=425 / d=460mm Recessed storage box in the gooseneck with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not in the rear incline) (Note: track width of machines or vehicles to be transported must not exceed external frame width of 2,550mm) Storage compartment for timber planks under the low-bed area 70mm timber planks for widening to 3,000mm Low loader lashing points 1 pair of lashing recesses in the front longitudinal member within the gooseneck, each rated to 10t 4 pairs of lashing holes on the outer frame, rated to 5t each (for securing straps) 9 pairs of recessed lashing mushrooms (above and side of outer frame), each rated to 10t 2 x at the front on the gooseneck 7 x on the low-bed deck First lashing point 250mm from the front and last max. 250mm from the rear, distance between lashing points max. 1,100mm 3 additional pairs of folding lashing points, each rated to 10t 1 x on the gooseneck (protruding) 1 x at the start of the low-bed deck, recessed inside the longitudinal beams 1 x recessed in the floor behind the last axle Drawbar assembly, turntable trailer Drawbar with certified 50mm towing eye Drawbar height adjustment via spring Axles and Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels & tyres 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be appropriately pre-equipped, not installed in this trailer; not a calibrated scale) Vehicle stability control system 2 fail-safe coupling heads at the front, with connecting lines to tractor unit, 12-24 Volt EBS, electronic braking system with EBS plug at the front, including connection cable Knorr make Note: This trailer may only be towed by vehicles that guarantee effective ABS operation! Electrical system 12-24 Volt, multi-chamber LED lights, side yellow LED lighting, LED number plate lighting, (Note: Certain tractor units may show fault codes even though functionality is correct) 2 white front position lights, LED 2 red/white lane marker ligh

Durumu: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Itodpfsrducpjx Ag Nef Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Durumu: mükemmel (kullanılmış), kilometre: 223.491 km, güç: 397 kW (539,77 bg), yakıt türü: dizel, yakıt: dizel, frenler: retarder, renk: mavi, emisyon sınıfı: Euro 6, Üretim yılı: 2018, Donanım: AdBlue, retarder, vinç, = Additional Options and Accessories = - Retarder (Intarder) - PTO (Power Take-Off) = Remarks = Volvo FH 540 8x4 Year: 2018 Mileage: 223,491 km Automatic transmission Unladen weight: 26,425 kg Gross vehicle weight: 39,000 kg Axle loads: 1: 9,000 kg 2: 9,000 kg 3: 10,500 kg 4: 10,500 kg Retarder / Intarder Multifunction steering wheel Air conditioning Auxiliary heater (night heater) Radio CD Electrically operated windows and mirrors Fridge Wheelbase: 1-2: 1,950 mm 1-3: 4,600 mm 1-4: 6,000 mm Full air suspension Sleeper cab with one bed Leather seats Stainless steel toolboxes (RVS toolboxes) Euro 6 with AdBlue Sliding fifth wheel Fifth wheel height: 1,400 mm Tyres: 1: 385/65R22.5 70% 2: 385/65R22.5 70% 3: 295/80R22.5 70% 4: 295/80R22.5 70% HMF 8520 crane Year: 2018 6x hydraulically extendable Winch 5-point outriggers (front stabilisers) Jib 6x hydraulically extendable Radio remote control ID NO.: 6 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations leading up to them. By responding in any form you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = Transmission: automatic Year of manufacture: 2018 Unladen weight: 26,425 kg Payload: 12,575 kg Gross vehicle weight: 39,000 kg Crane: HMF K-0 8520, year 2018, mounted behind the cab Technical condition: very good Visual condition: very good = Company Information = For more information: Ijdpfjx Npglsx Ag Nstf WhatsApp:

Durumu: kullanılmış, kilometre: 806.491 km, güç: 353 kW (479,95 bg), ilk tescil: 06/2014, lastik boyutu: 315/80R22,5, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.700 mm, renk: mavi, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2014, Donanım: buzdolabı, elektrikli cam sistemi, klima, Tire size: 315/80R22.5 Front axle: Suspension: leaf spring Rear axle: twin tires; Suspension: air suspension Drive: wheel Unladen weight: 7,657 kg Payload: 11,343 kg Gross vehicle weight (GVW): 19,000 kg Engine manufacturer: Mercedes-Benz Isdpfx Asuc Emwog Njtf = Additional options and accessories = - Tipping hydraulics - PTO

Durumu: kullanılmış, kilometre: 382.870 km, güç: 330 kW (448,67 bg), ilk tescil: 05/2019, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 05/2026, renk: turuncu, vites türü: otomatik, emisyon sınıfı: Euro 6, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, ? Space Cab ? Şerit takip asistanı ? Soğutucu kutu ? Telsiz ? Otomatik şanzıman ? Klima ? Uzun yol kabini ? Döner ikaz lambası ? Park ısıtıcısı ? Hız sabitleyici ? Kaldırma hidroliği ? Disk fren ? Navigasyon sistemi ? 1 x Depo ? ABS ? Yol bilgisayarı ? Diferansiyel kilidi ? Yaprak-hava süspansiyonu ? Çok fonksiyonlu direksiyon ? Elektrikli camlar ? Elektrikli ve ısıtmalı aynalar ? Sunroof ? 2 x Yatak ? Güneşlik ? Koltuk ısıtma Itsdex Ia Epopfx Ag Njf Tüm bilgiler garanti verilmeksizin sunulmuştur / Ara satış hakkı saklıdır.

Durumu: kullanılmış, makine/araç numarası: WDB9302052L720639, kilometre: 140.250 km, güç: 302 kW (410,61 bg), ilk tescil: 07/2013, lastik boyutu: 315/80 R22.5, dingil konfigürasyonu: 6x2, renk: diğer, vites türü: yarı otomatik, emisyon sınıfı: Euro 5, süspansiyon: hava, toplam uzunluk: 10.700 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2013, = Additional Options and Equipment = - Lock = Notes = Tank Tank material: Steel Freshwater tank: ✓ Hoses: ✓ High-pressure pump: ✓ Pump – Brand and Type: High-pressure pump: Uraca P3.45 P60, Discharge pump: HU 2000 Pump: ✓ Compartment capacity (liters): Baffle position 1: 1300 l water / 10,700 l waste; Position 2: 2,800 l water / 9,200 l waste; Position 3: 4,300 l water / 7,700 l waste Number of compartments: 2 Capacity (liters): 12,000 Pump – Capacity and Pressure: Uraca HP pump: max. flow rate 348 l/min, max. working pressure 190/205 bar Cleaning/Suction: ✓ Test pressure: 2 bar Maximum working load: 0.4 bar Fuel: ✓ Chassis Chassis height: 105 cm Fuel tank capacity: 350 l Wheelbase: 510 cm (1-2), 135 cm (2-3) = Further Information = Tire size: 315/80 R22.5 Suspension: Air suspension Axle 1: Steered; Tire tread left: 60%; Tire tread right: 70% Axle 2: Twin tires; Tire tread left outer: 100%; Tire tread right outer: 100% Axle 3: Steered; Tire tread left: 100%; Tire tread right: 70% Gross vehicle weight (GVW): 25,000 kg Itedpfsu H Ay Ssx Ag Nef Body manufacturer: Huwer Registration number: HX13YRN = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: kullanılmış, Üretim yılı: 2018, çalışma saatleri: 4.500 h, güç: 158 kW (214,82 bg), Donanım: klima, T 214 D 1A7 0010 Used Valtra T214 Direct 0020 4,500 operating hours 0030 First registration: 02.01.2018 YK5T214DOHTS277042 0040 Engine pre-heating 0050 Front axle suspension 0060 PTO stub shaft 6 splines / 35 mm 0070 Compressor kit "Free return 1'' coupling" 0080 AKH 38 mm pin A11 0090 Automatic hydraulic top link 0100 Quick-release K3 main headlights on roof 0110 PTO switch on rear mudguard 0120 Rear window wiper Itjdpfx Ageyfi Dho Njf 0130 Toolbox 0140 Signal socket 0150 Valve protection cover 0160 U-Pilot headland management 0170 1 On/Off valve at rear, 2 front remote valves 0180 ISOBUS at rear 0190 DL 2-line brake system 0200 Automatic climate control 0210 Front mudguards 0220 4WD 0230 Pivoting front axle IND 4WD HiLock 0240 LWS AutoComfort cab suspension 0250 Lower link hooks Cat. 3+3/3HD 0260 Heavy-duty lower links, mechanical, black metallic 0270 CVT transmission, hydraulic pump LS 160 L/min 0280 Passenger seat with seatbelt 0290 Fuel tank: N4: 235 litres 0300 T4: 380 L, front top link, hydraulic hook 0310 No pick-up hitch 0320 PTO: 540/540E/1000 rpm 0330 Premium wipers 0340 Wide-angle wiper for right-hand side mirror 0350 Electrically adjustable & heated mirrors 0360 DIN socket 12V 0370 Sigma Power PTO boost 0380 Ashtray with cigarette lighter 0390 Stoll front loader brackets 0400 RTK 0410 Tires 600/65 R28 Michelin 0420 Tires 710/70 R38 Michelin 0430 Front PTO 0440 Panoramic roof

Durumu: kullanılmış, kilometre: 437.070 km, güç: 338 kW (459,55 bg), ilk tescil: 01/2018, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: turuncu, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 10 m³, yükleme alanı uzunluğu: 4.900 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Donanım: ABS, her tahrikli, klima, navigasyon sistemi, ? Meiller 3-yönlü damper üst yapısı ? Tip: D316 ? Model yılı: 2017 ? Bordmatik ? Hydrodrive ? AP akslar ? Katlanabilir arka koruma barı ? 3 kademeli motor freni ? Telsiz ? Otomatik şanzıman ? Klima ? Uzun yol kabini ? Tepe lambası ? Hız sabitleyici ? Disk frenler ? Navigasyon sistemi ? Römork çalışması için yağ bağlantısı ? ABS ? Yol bilgisayarı ? Diferansiyel kilidi Itsdpsxqu E Tsfx Ag Nof ? Yaprak-hava süspansiyonu ? Çok fonksiyonlu direksiyon ? Çeki demiri ? Elektrikli camlar ? Elektrikli ve ısıtmalı aynalar ? Sunroof ? 1 x yatak ? Güneşlik ? Koltuk ısıtma Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Durumu: kullanılmış, kilometre: 437.070 km, güç: 338 kW (459,55 bg), ilk tescil: 01/2018, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: turuncu, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 10 m³, yükleme alanı uzunluğu: 4.900 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Donanım: ABS, her tahrikli, klima, navigasyon sistemi, ? Meiller 3-yönlü damper üstyapısı ? Tip: D316 ? Üretim yılı: 2017 ? Bordmatic ? Hydrodrive ? AP akslar ? Katlanabilir alt koruma ? 3 kademeli motor freni ? Telsiz ? Otomatik şanzıman ? Klima ? Uzun yol kabini ? Döner tepe lambası ? Hız sabitleyici Ijdpjxqu E Hofx Ag Njtf ? Disk frenler ? Navigasyon sistemi ? Römork kullanımı için yağ bağlantısı ? ABS ? Araç bilgisayarı ? Diferansiyel kilidi ? Yaprak-havalı süspansiyon ? Çok fonksiyonlu direksiyon ? Çeki demiri ? Elektrikli camlar ? Elektrikli + ısıtmalı aynalar ? Sunroof ? 1 x yatak ? Güneşlik ? Koltuk ısıtma Tüm bilgiler taahhüt edilmez / Önceden satış hakkı saklıdır.

Durumu: kullanılmış, kilometre: 570.000 km, güç: 294 kW (399,73 bg), yakıt türü: dizel, vites türü: mekanik, dingil konfigürasyonu: 3 dingil, toplam ağırlık: 26.000 kg, ilk tescil: 05/2002, yükleme alanı uzunluğu: 8.400 mm, yükleme alanı genişliği: 2.350 mm, emisyon sınıfı: Euro 3, renk: kırmızı, Donanım: klima, park ısıtıcısı, * Mercedes-Benz 2540 Actros MP1 inşaat makineleri taşıyıcısı * EZ 2002 * 570.000 km * Avro 3 * Debriyajlı Telligent manuel şanzıman * Klima * Yardımcı ısıtma * 6x2 aks tahrikli * Yaprak-hava süspansiyonu * Arka direksiyon aksı * Hidrolik rampalar Itedpfx Agev H Iato Nof * Yapı: 8.40 x 2.35 m * Yükleme yüksekliği: 110 cm * Dingil mesafesi: 5,90 m * Yük Ağırlığı: 12300 kg * Yük Kapasitesi: 13700 kg * Aracın toplam uzunluğu: 11,35 m

Durumu: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck: Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg Itodpemfqi Iefx Ag Njf For tractor units: 6x2, 6x4 and 8x4 Loading Platform: Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10° A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-part Steel Ramps: One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide Hardwood covering Hydraulically folding ramp tips Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward Braking System: WABCO EBS-E brake system in compliance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface Treatment: Entire steel structure shot-blasted automatically after welding using a blast wheel Second blasting with corundum for optimal coating adhesion Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax Rims in silver grey Steel Structure: Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC, S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection strip for supply lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, then every approx. 400 mm One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area Gooseneck guide plate for the saddle plate, approx. 500 mm wide Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform 1 sliding intermediate table for the telescopic tube with large cross-section Operating valves for hydraulic ramps on right side of vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring

Durumu: kullanılmış, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1987, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.500 mm, Goldhofer 3 dingilli rampalı alçak şasi dorse Toplam ağırlık: 24.000 kg Boş ağırlık: 6.000 kg Taşıma kapasitesi: 18.000 kg Toplam uzunluk: 11.500 mm Yükleme uzunluğu: Toplam yaklaşık 8.700 mm / Alçak yatak yaklaşık 6.500 mm / Kıvrım 2.200 mm Ijdpeya S Huofx Ag Notf Genişlik: 2.500 mm / Yükleme genişliği yaklaşık 2.480 mm Yükseklik: 900 mm Diğer bilgiler - Hidrolik rampalar, yanlara kaydırılabilir - Alt koruma - Ön ve arka uyarı levhaları - Büyük yük sabitleme paketi - Çift lastik takımı - BPW akslar Ek olarak, yeni ve ikinci el 3 ve 4 dingilli alçak şasi dorseler stoklarımızda mevcuttur. Lütfen daha fazla bilgi için web sitemizi ziyaret ediniz.

Durumu: yeni, Üretim yılı: 2026, Metal-Fach Bale Wrapper Z529 Self-loading Length: 2220 mm Width: 1420 mm Height: 2650 mm Own weight: 780 kg Tractor attachment: Three-point linkage Machine drive: Hydraulic Tractor power: 60 kW Recommended pump flow rate: 26 l/min Recommended hydraulic pressure: 14 MPa Bale size: 1200 mm - 1500 mm Film width: 750 mm Standard equipment: - Three-point linkage - Film cutter - Film pre-stretcher 750 mm - Manual control panel - Semi-automatic or fully automatic wrapping process The Z529 bale wrapper is a machine that is mounted on the front or rear three-point hitch of a tractor. It is loaded from below using special arms equipped with rotating rollers. The wrapping process is fully automatic, with an arm rotating around the bale and supplying the film, wrapping the bale as it rotates on the rollers. Upon completion, the film is gripped and cut by a hydraulically operated cutter. After pressing a button, the wrapped bale is unloaded onto the ground by opening the roller arms. The machine can wrap bales with a diameter of 1200 to 1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. Wrapping a 1200 mm diameter bale takes approximately two minutes. The compact dimensions of the machine allow for easy manoeuvring in the field or on the farm. Thanks to its relatively low weight (780 kg), the wrapper can be transported and operated by a tractor with only 60 kW of power. Standard features include a 750 mm film supply unit, hydraulically driven film cutter, and operator control panel. Optionally, the machine can be equipped with a hydraulic bale positioner, allowing the bale to be set upright on its base. ATTENTION !!!!! PLEASE READ !!!! We expressly reserve the right to prior sale as this item is also offered on other platforms. We strongly recommend inspection and testing to avoid misunderstandings regarding condition and suitability. Viewings and tests are possible at any time by appointment and are expressly encouraged!!! Images for reference only, may show optional accessories subject to surcharge. All specified internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND TOP-UP POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Iedpfxehlr Sxo Ag Netf Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Durumu: kullanılmış, Üretim yılı: 2024, çalışma saatleri: 3.322 h, güç: 169 kW (229,78 bg), yakıt türü: dizel, azami hız: 50 km/s, ön lastik ölçüsü: 600/60R30 | 50%, arka lastik boyutu: 710/60R42 | 50%, lastik boyutu: 710/60R42, lastik durumu: 50 yüzde, Donanım: araç içi bilgisayar, basınçlı hava freni, her tahrikli, kabin, klima, ön bağlantı, ön kuyruk mili, Tyres (front): 600/60R30, Tyres (rear): 710/60R42, Operating hours: 3,322, Hydraulic output: 160 L/min, First registration: 2024, Engine cylinders: 6, Transmission designation: CVT, Double-acting spool valves (4x), Three-point rear linkage, Electronic linkage control (ELC), Electronic single-lever control, Air-suspended seat, Radio, Beacon light, Power shuttle, Load-sensing additional hydraulic circuit (Power Beyond), 540/540E (750)/1000 rpm PTO, GPS system (receiver), ISOBUS, LED work lights, Automatic towing hitch, Height-adjustable drawbar, Pressureless return oil port, External control for front linkage, External control for three-point linkage, External control for hydraulic valves, External control for front PTO, External control for rear PTO, Pneumatic cab suspension, Exhaust aftertreatment / AdBlue, Automatic steering system, Hydraulic top link (rear)_____,Location: Customer Itedpjwzgagofx Ag Njf

Durumu: kullanılmış, Üretim yılı: 2024, çalışma saatleri: 460 h, güç: 173 kW (235,21 bg), Donanım: basınçlı hava freni, her tahrikli, kabin, klima, ön kuyruk mili, T 235 D 2A1 (0010) Used AGCO/Valtra all-wheel drive tractor (0020) Cab, air conditioning, heating, ventilation, (0030) Air-suspended seat, radio, multifunction armrest, (0040) Adjustable steering wheel, (0050) Rear window wiper, (0060) GPS / RTK steering system, (0070) Electrically adjustable rear-view mirrors, (0080) LED work lights front & rear, (0090) 2 x rotating beacons, (0100) Front axle suspension, (0110) Cab suspension, (0120) Front linkage, front PTO, (0130) Dual-line air brake system, (0140) ISOBUS pre-installation incl. socket, (0150) PTO: 540 rpm/1000 rpm, (0160) External controls on the fender, Isdpfx Agjwtug Se Notf (0170) Control valves front: 1 DA, (0180) Control valves rear: 5 DA, load sensing, (0190) Hydraulic top link, (0200) Lower linkage K80/ (0210) Automatic hitch / 38mm pin, (0220) Front tyres: 600/65R28 (0230) Rear tyres: 710/70R38

Durumu: kullanılmış, Üretim yılı: 2023, Donanım: ön kuyruk mili,

Durumu: yeni, azami yük ağırlığı: 26.840 kg, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 25 m³, Üretim yılı: 2025, Brakes: - Wabco EBS-E / ABS (electronic braking system with RSS) - Emergency release device for spring brake actuators - Drum brakes 420 x 180 mm - Paver brake with shortened rear mudguards and manual paving switch Axles: - 2 x 9 t BPW axles - Lift axle with starting aid - Reinforced single-leaf torsion bar suspension Suspension: - Air suspension with automatic lowering during tipping (for increased stability, deactivatable for overhead pavers) Electrics / Lighting: - SmartBoard (raising and lowering, lowering of the lift axle, starting aid, odometer, axle load display, ECAS, fault memory readout) - 1 x 15-pin trailer socket - Eco-LED II lighting with protective cover - 1 x additional LED work light - Flashing side marker lights - Tire pressure monitoring system (TPMS) General Attachments: - Aluminium air tank - Telescopic steel landing legs with saucer foot (can only be uncoupled when unladen) - 4 m aluminium ladder stored on the right side above the mudguards - Enclosed plastic single mudguards - Foldable underride guard - Rear tow eye - Foldable access ladder front left side Itjdpfxjw Eg Eqo Ag Nef - Document box on front wall Chassis: - High chassis frame made of high-strength fine-grained steel Tipping Body: - Half-shell rear tipping steel body made of STEELECT 450 steel - HBW 450 - Front wall with 600 mm roof as bow tarpaulin support - Side walls with stable, continuous, inward-sloping top rail - Front and rear wall sloped Thickness of Floor, Side Walls, Front and Rear Wall: - Floor tailored 5 / 6 mm - Front wall 5 mm - Rear wall 5 mm - Side walls 5 mm Hydraulic Cylinder: - Front hydraulic cylinder with medium working pressure Hydraulic Tailgate: - Suspended hydraulic and pendulum rear wall - Control of the hydraulic rear wall via mechanical ball valve Tarpaulin: - Electric sliding tarpaulin - RAL 9006 white aluminium - with manual switch on chassis and radio remote control Fifth Wheel Height: - Unladen approx. 1,350 mm - Laden approx. 1,340 mm Loading Volume: - Approx. 25 m³ Paint: - Chassis painted in RAL 7021 black grey - Tipping body in RAL 9006 white aluminium General Information: - Subject to errors and prior sale - New vehicle with manufacturer warranty Delivery Time: - Available immediately from Egestorf

Durumu: kullanılmış, çalışma saatleri: 415 h, Donanım: her tahrikli, klima, ön kuyruk mili, T 235 D 0010 Used Valtra all-wheel drive tractor 0020 Standard equipment plus "Grassland" package 0030 Black+C1 metallic paint 0040 Unlimited Option leather driver's seat Valtra Evolution 0050 Front linkage and front PTO 1000/1 rpm 0060 PTO 540/540E/1000 rpm 0070 Swivel front mudguards 0080 Load-sensing hydraulic pump 200 L/min 0090 Automatic lower link stabilizers 0100 Hydraulic top link, Cat. 3 0110 Automatic air conditioning (incl. footwell heating) 0120 Premium cabin interior with Valtra Evolution seat 0130 Panoramic roof 0140 SmartTouch Audio & Phone control unit 0150 Auto U-Pilot 0160 Electrically adjustable and heated exterior mirrors 0170 Section Control with up to 96 sections (3 booms) 0180 FM radio 0190 2 yellow rotating beacons 0200 Premium speakers 0210 Valtra Guide centimeter NTRIP (Novatel) and (Novatel)+ (RTK) 0220 Contour assistant 0230 Premium work lights 0240 Tyres: VF710/70R38 + VF600/65R28 Bridgestone 0250 Rear wheel weights 6 x 80 kg on fixed rims Itodpfx Agoxqt A Do Nsf

Durumu: kullanılmış, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2002, yükleme alanı uzunluğu: 11.900 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 3.150 mm, Donanım: ABS, * Vehicle comes with French registration documents * Adjustable floor with remote/radio control * Foldable loading ramps with remote/radio control * Edscha sliding roof currently dismantled Itjdpfxov Tgv To Ag Nef As viewed or offered, without any additional services or accessories. Our offer generally does not include a new roadworthiness (TÜV) inspection. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! The vehicle may be fitted with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We support you with export procedures, preparation of export documents, procurement of license plates, supplier’s declaration, etc.! The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical and data transmission errors. Listed equipment/features may need to be checked separately, if necessary. Errors and prior sale excepted.