Kullanılmış Amc Castera S/R 38T Semi-Trailer / Steering satın al (65.151)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Schiedam
2.777 km
Yarı alçak yükleyici
NooteboomSemi low loader trailer
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2010, toplam uzunluk: 13.140 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, dingil mesafesi: 9.010 mm, Üretim yılı: 2010, Donanım: ABS, = Diğer seçenekler ve ekipman =
- Kaldırma aksı
= Ek bilgiler =
Aks konfigürasyonu
Lastik ebadı: 245/70 R 17.5
Bledpfxoyz A E Es Alroh
Aks markası: SAF
Frenler: Kampana frenler
Süspansiyon: Havalı süspansiyon
Arka aks 1: Çift lastikli; Yönlendirmeli; Sol iç diş derinliği: %20; Sol dış diş derinliği: %20; Sağ iç diş derinliği: %20; Sağ dış diş derinliği: %20
Arka aks 2: Çift lastikli; Yönlendirmeli; Sol iç diş derinliği: %40; Sol dış diş derinliği: %40; Sağ iç diş derinliği: %40; Sağ dış diş derinliği: %40
Arka aks 3: Çift lastikli; Yönlendirmeli; Sol iç diş derinliği: %25; Sol dış diş derinliği: %25; Sağ iç diş derinliği: %25; Sağ dış diş derinliği: %25
Ağırlıklar
Boş ağırlık: 13.060 kg
Yük kapasitesi: 34.940 kg
Azami toplam ağırlık: 48.000 kg
Fonksiyonel
Yükleme yüksekliği: 90 cm
Durum
Hasar: yok
Kimlik
Plaka: OK-58-YS
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate covering over the axles
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load)
Bledpfxeyvnfgo Alrsh
Tyres:
* Tyres 235/75 R 17.5 3PMSF, brand of our choice
Axles:
* BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function
* The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually
* Axle tools
Brake System:
* WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098)
Paintwork:
* Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red
* Rear section metallized and painted RAL 9010 (Pure White)
* Rims in silver
Accessories:
* Spare wheel holder in front of the front wall (without spare wheel)
* 2" king pin
* Galvanized steel front wall approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection rail
* Recess at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under rear bevel of platform
* Bracket for warning beacon at trailer rear
* Brackets on both sides of gooseneck and rear for warning panels incl. socket
* TPMS tyre pressure monitoring system according to ECE R 141
* Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm)
* Galvanized toolbox integrated in the beveled gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container
* Adjustable mounting rails for ALU loading ramps at the vehicle rear
* 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform
* Galvanized outriggers extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control depending on current axle load and load condition
* 2 LED reversing lights mounted on rear panel
* 2 pairs of ferry-
Küçük ilan
Kirchberg
2.302 km
Alçak şasi dorse
Semi Trailer 26 FGM 2-Achs Tieflader
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 19.080 kg, toplam ağırlık: 28.480 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2025, bir sonraki muayene (TÜV): 08/2026, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! BPW 10 ton akslar, 2 akslı yönlendirme, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, hidrolik 1400x700 + manuel 700.
Blodpfx Aljykgkcereh
Küçük ilan
Hoogerheide
2.766 km
Düşük yükleyici
Turbo's Hoet3-axle semi-lowbed trailer 39 t + ramps
Çağrı
Koşul: ikinci el, makine/araç numarası: YE73SAAX0HB206959, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2013, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.800 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2013, = Additional Options and Accessories =
- Drum brakes
= Remarks =
Chassis
Coupling pin / fifth wheel diameter: 2 inch
Coupling pin / drawbar height: 120 cm
Drum brakes: ✓
Special transport
2-part road plates: ✓
Hydraulic ramps: ✓
Load floor length: 930 cm
Maximum width: 290 cm (250+20+20)
Maximum length: 1,530 cm
Extendable: ✓
Telescopic: ✓
= Further Information =
Axle configuration
Axle brand: BPWEco
Brakes: Drum brakes
Suspension: Air suspension
Bsdpfx Ajwg Elfelrelh
Front axle: Tyre size: 235/75 R17.5; Tread left: 55%; Tread right: 40%
Centre axle: Tyre size: 235/75 R17.5; Tread left: 50%; Tread right: 30%
Rear axle: Tyre size: 235/75 R22.5; Tread left: 30%; Tread right: 60%
Weights
Unladen weight: 12,890 kg
Payload: 26,110 kg
Gross vehicle weight: 39,000 kg
Functional
Load floor height: 90 cm
Identification
Registration number: QARV573
= Company Information =
For more information on this unit please call: or e-mail: .
A full stock overview can be found at: .
Please do not forget to subscribe to our newsletter for weekly updates on our stock.
Küçük ilan
Berkel en Rodenrijs
2.775 km
2008 PACTON T2-001 ŞEHİR DORSESİ | 10,40 M UZUNLUK | DİREKSİYONLU AKS | KALDIRMA AKSI | BPW DİSK.
PACTONT2-001 CITY TRAILER| 10.40 LONG | STEERING AXL...
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2008, renk: diğer, Üretim yılı: 2008, Aks 1: sol 14 mm sağ 14 mm
Aks 2: sol 14 mm sağ 14 mm
Bodpfxsyv Ep No Alrelh
Aks 3: sol mm sağ mm
= Daha fazla bilgi =
Boş ağırlık: 6.910 kg
Küçük ilan
Kirchberg
2.302 km
Alçak şasi dorse
Semi Trailer 19 AF 1-Achs Tieflader Plane
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 16.300 kg, toplam ağırlık: 22.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, load bed length 8,350 mm, Knorr brake system EBS 4s/2k (ASR), rear folding support legs rated at 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings integrated in the outer frame of the platform (8 t), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rolling platform bed, extendable bumper, ramp holder.
Bljdeih E Hyopfx Alrjh
Küçük ilan
Köln
2.572 km
Tanker yarı römork
CRYOLORgas tank semi trailer for oxygen, nitrog
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1996, Oksijen, azot, argon kriyojenik için CRYOLOR gaz tankı yarı römorku
Yapım yılı: 1996
Ayrıca başka tankerlerimiz, yarı römorklarımız, LIN, LOX, LAR, LNG ve CO2, argon, oksijen, nitrojen ve karbondioksit, LNG, hidrojen, metan için tanklarımız var.
Sorularınızı telefon ve e-posta yoluyla yanıtlamaktan mutluluk duyarız
Bljdpfezbbw Eex Alreh
Küçük ilan
Köln
2.572 km
Tanker yarı römork
CRYOBASE GmbHgas tank semi-trailer for CO2 Carbon dio
Çağrı
Koşul: yeni, boş ağırlık: 9.600 kg, Üretim yılı: 2026, CO₂ (karbondioksit) için yeni gaz tankeri yarı römork
Üretici: CRYOBASE GmbH
Bedpfx Ajzbbzwjlrjlh
Hacim: 23 m³
Çalışma basıncı: 22 bar
Pompalı
Boş ağırlık: 9.600 kg
İlk tescil: 2026 yılı
LIN, LOX, LAR, LNG ve CO₂, argon, oksijen, azot, karbondioksit, LNG, hidrojen ve metan için başka tank yarı römorklarımız da bulunmaktadır.
Daha fazla bilgi için lütfen bizimle telefon veya e-posta yoluyla iletişime geçin.
Küçük ilan
Almanya
2.357 km
Tanker yarı römork
Cryocan LNG gas tanksemi trailer for LNG, methane cryogenic
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2011, LNG (sıvılaştırılmış metan) için kriyojenik gaz semi-treyler.
Üretici: CRYOCAN
AB onayı.
Yıl: 2011
Hacim: 50,25 m3
vakum sertifikası
Ayrıca diğer tankerlerimiz de var
LIN, LOX, LAR, LNG ve CO2
Argon, oksijen, azot ve karbondioksit, metan, hidrojen
Blodpfxozbbvno Alreh
Küçük ilan
Köln
2.572 km
Tanker yarı römork
SATRIgas semi trailer for CO2 Carbon dioxide
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1991, Kullanılmış CO2 (karbondioksit) gaz tankeri
Üretici: SATRI
Bsdpfszbbzqex Alrelh
Üretim yılı: 1991
Boş ağırlık: 10.300 kg
Hacim: 24 m³
LIN, LOX, LAR, LNG, CO2, argon, oksijen, azot, karbondioksit, LNG, hidrojen ve metan için de diğer tanker dorseleri, tanklar ve kaplar sunuyoruz.
Sorularınızı memnuniyetle telefonla veya e-posta ile yanıtlıyoruz.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Çağrı
Koşul: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
Bedpfx Aljup U Hzjrolh
- 30 mm thick hardwood flooring
Loading Platform:
- Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN)
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN)
- Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN)
- Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each
Two-Piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering
- Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tools
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Brackets for warning panels left and right on gooseneck and rear, incl. socket
- One spare wheel
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on galvanized connection rail at front
- 4 wheel chocks
- Galvanized, extendable widenings by approx. 230 mm per side
- Galvanized folding supports under rear bevel of platform
- Bracket for beacon at rear of trailer
- Cover plates to bridge the gap between ramps and platform
- White reflective tape to EU regulations on sides and extension, red at the rear
- Electro-hydraulic unit at rear, under loading platform
- Control valves for ramps positioned on right side of trailer
- European reflector signs (red-yellow) on rear of trailer
- Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light
- Mount for beacon on warning panels
- Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (body length approx. 2,560 mm)
- 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container
- 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform
- One removable galvanized intermediate table with 1 pair WADER container locks
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel
- Anti-slip coated sand layer on tread plates of gooseneck and platform
- 80 km/h speed limit stickers on the rear and on both sides
- Load gauge for determining axle loads, including load diagram
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi m. hydr. Rampen-nlla.
Çağrı
Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck:
• Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood floor
Extendable loading platform:
• Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8°
• Cut-outs in the outer frame of the loading platform for securing straps
• Approx. 48 mm thick hardwood covering, checker plate covering over the axles
Bsdpfx Alehlz S Nerelh
Two-part steel ramps:
• One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering
• Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment
• Maximum load per pair: approx. 40,000 kg
Axles and tires:
• BPW axles and suspension, 2 rigid axles, 1 self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reversing lock, activation via reverse gear and manual operation
• Air suspension with lift and lower valve
• Axle tools
• 235/75 R 17.5 3PMSF
Braking system:
• WABCO braking system according to EU regulations with EBS-E
Painting:
• First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single color in MB 7350 Novagrey
• Rear section metallized and painted in RAL 9010
Landing legs:
• JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load)
Steel construction:
• Steel construction made of high-strength fine grain steels
• Steel grades:
• S355J2+N/S355MC
• S690QL/S700MC
Electrical system:
• Electrical system according to EU requirements, 24 Volt lighting
• ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
Included accessories:
• One spare wheel with holder
• One galvanized steel headboard approx. 400 mm high
• Yellow-red air couplings on the galvanized connection panel at the front
• 4 wheel chocks
• Bracket for rotating beacon at the rear of the trailer
• Holder at rear of gooseneck for ALU approach ramps
• Galvanized folding supports under the rear chamfer of the loading platform
• Cover plates for bridging the gap between ramps and loading platform
• White reflector tape to EU specifications on the sides, extension, and red at rear
• Electro-hydraulic unit mounted at the rear, under the loading platform
• On both sides of the gooseneck and ramps, holders for warning panels with socket
• Control valves for the ramps mounted on the right trailer side
• ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm
• Rear, galvanized removable stakes (body length approx. 2,560 mm)
• Four approx. 400 mm extendable warning boards with position light
• 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container
• 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform
• Galvanized extensions, extendable by approx. 230 mm per side
• 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform
• Anti-slip sand coating on checker plate surfaces above kingpin and loading platform
• Load pressure gauge for axle load measurement including load chart
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Çağrı
Koşul: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
• Gooseneck with rear bevel approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Loading platform:
• Extendable loading platform with rear bevel approx. 500 mm x 8°
• 9 pairs of outwards folding lashing rings
• 1 pair of flat lashing rings at the front of the loading platform
• Cut-outs in the outer frame for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate covering above axles
Landing gear:
• JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles
• Technical axle load: 12,000 kg
• 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually
• Tyres 235/75 R 17.5 3PMSF
Braking system:
• WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M)
Paintwork:
• First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single colour MB 7350 Novagrau
• Rear section metallised and painted RAL 9010 (pure white)
Steel construction:
• Fabricated from high-tensile fine-grained steels
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Equipment:
• One spare wheel with holder in front of the bulkhead
• 2" kingpin
• Galvanised steel front bulkhead approx. 400 mm high
• Yellow-red air couplings on galvanised connection strip at the front
• 2 wheel chocks with holder mounted to the bulkhead
• Provision at rear of gooseneck for ALU loading ramps
Bledpjma Hf Refx Alrsh
• Galvanised extendable deck wideners, approx. 230 mm per side
• Bracket for beacon at the rear of the trailer
• Galvanised supports under the rear bevel of the loading platform
• White reflective tape to EU regulations on sides, extension; red at the rear
• Mounting hardware for warning signs with socket at gooseneck and rear, left and right
• Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm
• Removable rear galvanised stanchions (body length approx. 2,560 mm)
• 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame
• Lift axle on front axle with TEBS E control, responsive to axle load and load status
• Adjustable mounting rails for ALU loading ramps at rear
• 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel
• BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection
• 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm
• Mounting for beacon on warning signs
• European reflective plates (red-yellow) at rear of trailer
• 80 km/h speed stickers on rear and both sides
• Load gauge to determine axle loads including load diagram
• HRM Metallisation (High Resistance Metallisation) of outer frame
• Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-RM-ALU-Ram.
Çağrı
Koşul: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Telescopic loading area with rear incline approx. 1,000 mm x 8°
- 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions
- 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm
- 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc.
- Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
One-piece ALU ramps:
Bjdpfx Ajiu Er Aelrjlh
- One pair of single-piece ALU ramps approx. 2,500 x 600 mm
- Ramps with spring assist and manual lateral adjustment
- Maximum load per pair: 24,000 kg
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with raise/lower valve
- Axle tools
- Tyres 235/75 R 17.5
- TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141
Accessories included:
- One spare wheel with bracket in front of the bulkhead
- 2" kingpin
- One galvanized steel bulkhead ca. 400 mm high
- Yellow-red air couplings at the galvanized front coupling strip
- 4 chocks with bracket at the bulkhead
- Accommodation at the rear of the gooseneck for ALU approach ramps
- Galvanized extensions, extendable approx. 230 mm per side
- Galvanized folding supports under the rear incline of the loading area
- Bracket for a rotating beacon at the rear of the trailer
- White reflector tape in accordance with EU requirements on sides, red on extension and rear
- On the gooseneck and rear panel, bracket for warning boards including socket, left and right
- On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm
- Removable rear galvanized stanchions (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container
- 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area
- One removable galvanized intermediate table with 1 pair WADER container pockets
- 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline
- Non-slip sand coating painted onto the checker plate on the gooseneck and loading area
- Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light
- Bracket for rotating beacon on warning boards
- 80 km/h speed stickers on the rear and both sides
- Load gauge for axle load determination including load chart
- HRM Metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
FaymonvilleMAX Trailer 4-Achs-Tele-Semi mit Rampen, zwgl.
Çağrı
Koşul: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear taper approx. 750 mm x 10°.
3 pairs of lashing rings
30 mm thick hardwood flooring
Extendable loading platform:
Extendable loading platform with rear taper approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings
Blsdol Uxdkopfx Alrsh
3 pairs of outward-folding lashing rings
1 pair of horizontal lashing rings at the front of the loading platform
Cutouts in the outer frame of the platform for attaching tension straps
Approx. 48 mm thick hardwood flooring, checker plate over the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking.
Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg
Landing legs:
JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
Tires 245/70 R 17.5
Brake system:
Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit
Steel structure:
Steel structure made of high-strength fine-grain steels
Steel qualities:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer
High-quality two-component (2K) topcoat in single-tone Nova Grey
Rear section metallized and painted in RAL 9010 (pure white)
No metallic paint possible
Electrical system:
Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories included:
2" king pin
Galvanized steel front wall approx. 400 mm high
Yellow-red air couplings at the galvanized front connection bar
4 wheel chocks with holder at the front wall
One spare wheel with holder in front of the front wall
Electro-hydraulic unit
Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control
Mount for ALU loading ramps at rear section of the gooseneck
European reflector boards (red-yellow) at the rear of the trailer
White reflector tape as per EU regulations on the side, extension and rear Red at the rear
At the gooseneck and ramps, one holder left and right for warning signs including socket
Beacon holder at the rear of the trailer
Galvanized folding support legs under the rear ramp of the loading area
Control valves for ramps located on the right side of the trailer
Cover plates to bridge the gap between ramp and loading platform
One mud flap at the rear of the trailer
Manual and description on USB stick
BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump
Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm
Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm
One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug
4 pairs of WADER container locks in the loading area for a
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Jumbo-Semi mit Plane
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading Platform:
5 pairs of fold-out lashing rings on the outside
3 pairs of fold-out lashing rings on the outside
1 pair of horizontal lashing rings at the front end of the platform
Cut-outs in the outer frame of the loading platform for attaching tension straps
Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles
Landing Gears:
JOST landing legs with 2-speed gearbox, lifting capacity 24 t
Axles and Tyres:
BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function
Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Axle tool
Tyres 205/65 R17.5 3PMSF
Brake System:
WABCO brake system according to EU regulations, with EBS-E
Steel Construction:
High-strength fine-grained steel construction
Steel Grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical Equipment:
Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets
Connections according to ISO
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer
Premium 2-component topcoat, single colour in MB 7350 Novagrau
No metallic finish possible
Rear section metallized and painted RAL 9010
Accessories Included:
1 spare wheel 205/65 R 17.5
TPMS tyre pressure monitoring system according to ECE R 141
Galvanized front connection bar with yellow-red air couplings
4 chocks with holder at the front wall
Bsdpfstphtmex Alrslh
Mounting at rear of gooseneck for ALU loading ramps
Galvanized folding supports under the loading platform’s rear chamfer
Holder for a warning beacon at the rear of the trailer
Height-adjustable tarpaulin superstructure
Galvanized front wall with tensioning mechanism for sliding curtains
Height-adjustable by approx. 400 mm
Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls
On platform: 3 pairs of adjustable stanchions
Rear of superstructure can be hydraulically widened left and right by approx. 750 mm
Sliding roof with upward swinging portal beam
Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals
Height upper edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will damage the tarpaulin
Suspension rail for ALU loading ramps at the rear of the vehicle
At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket
Mudflap at the rear of the trailer
European reflector boards at the rear of the trailer
7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
Lift axle on the front axle with TEBS E control, depending on current axle load and loading status
Rear of superstructure with closed ALU wing doors
Anti-slip sand finish painted on checker plates on gooseneck and platform
Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump
80 km/h speed sticker at rear and on both sides
Load gauge for axle load determination including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 4-Achs-Tele-Semi-Rampen-nlla
Çağrı
Koşul: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
- Loading platform in extendable design with rear taper approx. 1,000 mm x 8°
- 5 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
- c. 48 mm thick hardwood flooring, over the axles with checker plate covering
Detachable Two-Part Ramps:
- One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Landing Legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
- BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function
- The trailing steering axles can be locked electromagnetically via reverse gear or manually
- Axle tools
- Tyres: 235/75 R 17.5
Brake System:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel Construction:
- Steel construction made of high-tensile fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat finish in single-colour Novagrau
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets
Accessories Included:
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with holder in front of the headboard
- Yellow-red air couplings at the galvanized front terminal strip
- 4 chocks with holder at the front wall
- Mounting at the rear area of the gooseneck for ALU drive-on ramps
- Galvanized folding supports under the taper of the loading platform
- Bracket for a rotating beacon
- Cover plates to bridge the gap between ramps and loading platform
- White reflector tape to EU specification on the sides, red at rear and on extension
- Electro-hydraulic power pack
- On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet
- Ramp control valves installed on the right trailer side
- One mudguard at the rear of the trailer
- Instruction manual and description on USB stick
- ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm
- The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm)
- 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container
Bedpfx Aleh Etf Rorelh
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Extensions, galvanized, extendable by approx. 230 mm per side
- Lift axle on the front axle with control
- Square climbing rails 20 x 20 mm
- Central lubrication system BEKAMAX
- F
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
Blsdjl Sl Izepfx Alreh
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Full specifications available upon request.
Gooseneck:
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading platform, extendable design:
* Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8°
* 5 pairs of outward folding lashing rings (LC 5,000 daN)
* 3 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame for attaching tension belts (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate over axles
Axles:
* BPW axles and suspension
* 1st axle rigid, all other axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with raise/lower valve
* Axle tools included
Tyres:
* Tyres 245/70 R 17.5 3PMSF, load index (146/146 F)
* Manufacturer at our discretion
* TPMS tyre pressure monitoring system according to ECE R 141
* Data transmission to tractor unit via standardised EBS interface per ISO 11992
* For correct display, the tractor unit must support transmitting and displaying these data
Landing legs:
* JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Paintwork:
* Complete steel structure shot-blasted automatically after welding
* Second blasting using corundum for optimum coating adhesion
* Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Metallic paint not available
* Coating tested in salt spray test according to ISO 9227-NSS
* Cavities sealed with special wax
Steel structure:
Bedsxbmpfopfx Alrolh
* Steel construction made from high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with indicators
* ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO
* 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Including the following additional equipment:
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on front galvanized connection strip
* Electro-hydraulic unit
* Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit)
* Galvanized folding supports under the rear chamfer of the platform
* 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN)
* Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H)
* Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm)
* Galvanised toolbox integrated into the chamfered gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30?) or
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
Bljdpfjyhkq Usx Alroh
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings
* Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each
* Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Two-part steel ramps:
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable
* Maximum load per pair: 40,000 kg
Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lockout via reverse gear and manual activation
* Air suspension with lift and lower valve
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* TPMS Tyre Pressure Monitoring System according to ECE R 141
Brake system:
* WABCO brake system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection
* Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
Incl. the following additional features:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* Electro-hydraulic unit at the rear, under the loading platform
* On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* One galvanized toolbox, integrated into the chamfered gooseneck
* 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container
* 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each
* One removable galvanized intermediate table with 1 pair of WADER container pockets
* 1 additional hook-on intermediate table, ap
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment details. Complete specification available upon request.
Gooseneck:
* Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10°
* 3 pairs lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Loading platform:
* Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
* 6 pairs outward-folding lashing rings (LC 5,000 daN)
* 2 pairs outward-folding lashing rings (LC 10,000 daN)
* 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN)
* Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN)
* Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles
Two-piece steel ramps:
* One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm)
* Ramp with hydraulically foldable ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load capacity per pair: approx. 40,000 kg
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 trailing steered axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lifting and lowering valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Tyres:
Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tire Pressure Monitoring System (TPMS) according to ECE R 141
Paintwork:
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
Bledpfx Aloyhkrrerjh
* Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL
* Wheels in silver grey
Accessories included:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm)
* Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear beneath the loading area
* On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm)
* One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller
* Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller
* One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch
* Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area
* Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Bedpfx Aloyhkqzjrolh
Loading Platform:
* Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN)
* Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate
Two-piece Steel Ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable
* Maximum load per pair: approx. 40,000 kg
Landing Gear:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake System:
* WABCO braking system in accordance with EU regulations, with EBS-E (2S2M)
Tires:
* Tires 235/75 R 17.5 3PMSF – brand at our discretion
TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection
* Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL
* Wheels in silver-gray
Accessories included:
* 2-inch kingpin
* Galvanized steel front wall approx. 400 mm high
* Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Painted sand layer as anti-slip on the checker plates above the kingpin and platform
* Electro-hydraulic unit at rear beneath the loading platform
* On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm)
* Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller
* Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley
* One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch
* Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform
* Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status
* 7 pairs inst...
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
- Extendable loading platform with rear bevel approximately 1,000 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-tracking axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear or manually
- Air suspension with raise/lower valve
- Axle tools
- 235/75 R 17.5 3PMSF
Brake System:
- WABCO braking system complying with EU regulations, with EBS-E (2S2M)
Landing Legs:
- JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load)
Accessories Included:
- One spare wheel with holder in front of the front wall
Bodpfeuqlmnjx Alrslh
- 2" kingpin
- Galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection strip
- 4 wheel chocks with holders on the front wall
- Bracket for beacon at rear of trailer
- Recess at rear of gooseneck for ALU entry ramps
- Galvanised folding supports under the loading platform's rear bevel
- Cover plates to bridge gap between ramps and loading platform
- White reflective tape according to EU regulations on sides, extendable section, and rear in red
- Electro-hydraulic unit at the rear, under the loading platform
- Brackets for warning signs on both left/right of gooseneck and ramps, with socket
- Ramp control valves fitted on right-hand side of trailer
- Mudflap at the trailer rear
- Manual and documentation on USB stick
- ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm
- Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm)
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container
- 6 pairs of stake pockets 100x50 mm in outer frame of loading platform
- Galvanised extendable width extensions, approx. 230 mm per side
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel
- Sanded, painted anti-slip layer on checker plates over kingpin and loading platform
- Holder for beacon on warning signs
- European reflector boards (red-yellow) at the rear
- 80 km/h speed limit stickers on rear and both sides
- Load manometer for determining axle loads including load chart
- HRM Metallisation (High Resistance Metallisation) of outer frame
- Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedri
Çağrı
Koşul: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck:
- Swan-neck with 30 mm thick hardwood flooring
- Swan-neck at the rear in straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable loading platform:
- Loading platform in extendable version
- 5 pairs of fold-out lashing rings
- 3 pairs of fold-out lashing rings
- 1 pair of horizontal lashing rings at the front of the loading platform
- Cut-outs in the outer frame of the loading platform for attaching tension belts
- Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Landing legs:
- JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tyres:
- BPW axles, two fixed and two steering axles
- Air suspension, drum brakes, with lift/lower function
- The steering axles can be locked electro-magnetically via reverse gear or manually
- Axle tools
- Tyres: 205/65 R17.5
Brake system:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel structure made of high-strength fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single colour in Nova grey
- Rear section metallized and painted in RAL 9010 (pure white)
Included accessories:
- One spare wheel with holder located in front of the bulkhead
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the front galvanized connection strip
- 4 wheel chocks with holder at the bulkhead
- Galvanized folding supports under the sloped part of the loading platform
- Holder for rotating beacon at the rear of the trailer
- Galvanized, extendable width extensions approx. 230 mm per side
- White reflective tape according to EU regulations on sides, at extension section, and red at rear
- On swan-neck and rear panel: one mount each for warning panels including socket (left and right)
- European reflective warning boards (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm
- The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm)
- 7 pairs of WADER container locks
- 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers
- 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform
- Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status
- Sliding hook-in rail for ALU loading ramps at the rear of the vehicle
- Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform
- Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp
- Mount for rotating beacon on warning panels
Bledjt Ag Uwspfx Alreh
- Speed stickers 80 km/h at the rear and on both sides
- Load gauge to determine axle loads, including load chart
Sizin için aramayı kolaylaştırıyoruz: "amc castera s/r 38t semi-trailer / steering"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
























































































































































































