Kullanılmış Euramobil Xtura Xt 686 Ef, Dachklima satın al (3.750)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Ara
Durum: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details upon request.
Lhjdpfx Acsy Aufmeweh
Gooseneck:
* Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform in extendable design:
* Extendable load platform with rear bevel approx. 1,000 mm x 8°
* 6 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be activated via reverse gear and manually
* Air suspension with raise/lower valve
* Axle tool
Brake system:
* Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Steel construction:
* Steel construction of high-strength fine-grained steels
* Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Painting:
* Complete steel structure automatically blast-cleaned after welding with shot-blasting system
* Secondary blasting with corundum for optimum coating adhesion
* Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL
* Wheel rims in silver grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Paint system tested in salt spray fog test according to ISO 9227-NSS
* Cavity sealing with special wax
Electrical system:
* Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098
Accessories included:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection strip at the front
* 4 wheel chocks with holder at the front wall
* Provision at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under the rear bevel of the loading area
* On the gooseneck and rear panel left and right, each with a holder for warning boards including socket
* Load manometer to determine axle loads including load diagram
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm)
* One galvanized toolbox integrated in the beveled gooseneck
* 3 pairs WADER C
Küçük ilan
Roosendaal
2.760 km
Yarı alçak yükleyici
Faymonvilleextentadable 20m disconnectable front + 42000kg...
Ara
Durum: mükemmel (kullanılmış), ilk tescil: 09/2015, yükleme alanı uzunluğu: 20.180 mm, yükleme alanı genişliği: 3.000 mm, renk: diğer, Üretim yılı: 2015, Damages: none
YAFTL2007F0017329
= Further Information =
Unladen weight: 13,600 kg
Payload: 28,400 kg
Gross vehicle weight (GVW): 42,000 kg
Technical condition: very good
Lhodeymrb Sjpfx Acweh
Visual condition: very good
Price: On request
Registration number: DW205AH
= Company Information =
If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the provided information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber.
MOB: Dutch) Available on WhatsApp and Viber.
When paying by bank transfer, the funds must be transferred to the bank account listed below. Always check the payment details specified on our website. If you have received different information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Ara
Durum: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment details available on request.
Lodpfx Acjyvnfgjwshh
Gooseneck:
* Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate covering over the axles
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF, brand of our choice
Axles:
* BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function
* The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually
* Axle tools
Brake System:
* WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098)
Paintwork:
* Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red
* Rear section metallized and painted RAL 9010 (Pure White)
* Rims in silver
Accessories:
* Spare wheel holder in front of the front wall (without spare wheel)
* 2" king pin
* Galvanized steel front wall approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection rail
* Recess at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under rear bevel of platform
* Bracket for warning beacon at trailer rear
* Brackets on both sides of gooseneck and rear for warning panels incl. socket
* TPMS tyre pressure monitoring system according to ECE R 141
* Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm)
* Galvanized toolbox integrated in the beveled gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container
* Adjustable mounting rails for ALU loading ramps at the vehicle rear
* 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform
* Galvanized outriggers extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control depending on current axle load and load condition
* 2 LED reversing lights mounted on rear panel
* 2 pairs of ferry-
Küçük ilan
Burghaun
2.380 km
Tekerlekli ekskavatör
JCBJS 175 W / 2024 / nur 622h! / 1x Tieflöffel
Ara
Durum: ikinci el, Üretim yılı: 2023, çalışma saatleri: 622 h, JCB JS 175 WT-SV wheeled excavator, year of manufacture: 2023, model year: 2024, operating hours: only 622h!, adjustable boom, 1x digging bucket, seat heating, heating, auxiliary hydraulic circuit for hammer, reversing camera, dozer blade, stabilizer pads, engine: JCB ECOMAX [129kW/175hp], weight: 19,200kg, good condition, immediately operational.
Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale!
Ledpjyi R Ayofx Acwohh
Rental possible
= Further information =
Drive: Wheeled
Please contact Tobias Ebert for further details.
Küçük ilan
Seesen
2.411 km
Entegre karavan
EURAMOBILINTEGRA LINE IL 720 EB *Finanzierung möglich*
Ara
Durum: ikinci el, kilometre: 17.500 km, güç: 118 kW (160,44 bg), yatak sayısı: 2, yakıt türü: dizel, vites türü: mekanik, ilk tescil: 08/2021, dingil konfigürasyonu: 2 dingil, emisyon sınıfı: Euro 6, Donanım: ABS, banyo, elektronik denge programı (ESP), ikinci el araç garantisi, klima, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, Financing available!
Lhsdpfx Aetqxixscwsh
For more information, contact:
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett Kombination ATX
Ara
Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website.
Excerpt from the equipment list. Complete specification available on request.
Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4
3-axle compact front bogie:
* Hook coupling at the front and rear. Length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Low bed:
* ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick
* Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear
* Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm
* Loading height approx. 480 mm with ground clearance of approx. 150 mm
5-axle rear bogie:
* Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* Pendulum axle
3-axle front bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
Lodpfxow Tgp Do Acwshh
* Hydraulic axle compensation
* Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
5-axle rear bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paint finish:
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection
* Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system
Includes accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version
* 3.5" king pin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with a separate air connection for pneumatic tools
* BEKA-MAX central lubrication for a 3-axle bogie
* Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams
* Without container locks
* Brackets on the outer beams of the loading platform for attaching foldable extensions
* One 7-pin socket left and right, front and rear, on the rear bogie for warning signs
* BEKA-MAX central lubrication for a 5-axle bogie
* Socket on the rear bogie for the cable remote control for rear axle steering
* Rear bogie with trough
* 2 LED reversing lights mounted on the rear plate
* European reflective signs (red-yellow) at the rear
* One mudflap at the rear
* One LED beacon with bracket left and right on the end cross member
* Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck
* 1-cycle
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Ara
Durum: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings
* Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each
* Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Two-part steel ramps:
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable
* Maximum load per pair: 40,000 kg
Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lockout via reverse gear and manual activation
* Air suspension with lift and lower valve
Lhodpfx Acoyhkq Uewoh
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* TPMS Tyre Pressure Monitoring System according to ECE R 141
Brake system:
* WABCO brake system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection
* Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
Incl. the following additional features:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* Electro-hydraulic unit at the rear, under the loading platform
* On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* One galvanized toolbox, integrated into the chamfered gooseneck
* 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container
* 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each
* One removable galvanized intermediate table with 1 pair of WADER container pockets
* 1 additional hook-on intermediate table, ap
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Ara
Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment details. Complete specification available upon request.
Gooseneck:
* Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10°
* 3 pairs lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Loading platform:
* Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
* 6 pairs outward-folding lashing rings (LC 5,000 daN)
* 2 pairs outward-folding lashing rings (LC 10,000 daN)
* 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN)
* Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN)
Ljdpoyhkrrefx Acwehh
* Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles
Two-piece steel ramps:
* One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm)
* Ramp with hydraulically foldable ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load capacity per pair: approx. 40,000 kg
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 trailing steered axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lifting and lowering valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Tyres:
Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tire Pressure Monitoring System (TPMS) according to ECE R 141
Paintwork:
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL
* Wheels in silver grey
Accessories included:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm)
* Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear beneath the loading area
* On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm)
* One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller
* Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller
* One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch
* Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area
* Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Ara
Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Loading Platform:
* Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN)
* Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate
Two-piece Steel Ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable
* Maximum load per pair: approx. 40,000 kg
Landing Gear:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake System:
* WABCO braking system in accordance with EU regulations, with EBS-E (2S2M)
Tires:
* Tires 235/75 R 17.5 3PMSF – brand at our discretion
TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection
* Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL
* Wheels in silver-gray
Accessories included:
* 2-inch kingpin
* Galvanized steel front wall approx. 400 mm high
* Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Painted sand layer as anti-slip on the checker plates above the kingpin and platform
* Electro-hydraulic unit at rear beneath the loading platform
* On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm)
* Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller
* Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley
Lsdeyhkqzjpfx Acwjhh
* One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch
* Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform
* Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status
* 7 pairs inst...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEGigamax Tiefbett 1+3
Ara
Durum: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Excerpt from the equipment list. Complete specifications available upon request.
GOOSENECK:
* Gooseneck with integrated single-axle running gear (pendulum axle), removable design
* Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles
* Length: approx. 5,200 mm, with front chamfer approx. 60°
* Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7
* For tractor units: 6x4 or 8x4
Ljdpfx Aoyhkqnjcwohh
* Detachable steel front wall, approx. 400 mm high, with chamfered design
* 1 pair of mechanical supports at the front of the gooseneck
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
* 1 spare wheel mount inside on the front wall of the gooseneck with bracket
* 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN)
* 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN)
* 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN)
* On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish
* On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish
* 3.5 inch kingpin
* TPMS tyre pressure monitoring system according to ECE R 141
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H)
LOADING DECK:
* Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick
* Length x width approx. 8,000 mm x 2,740 mm
* Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams
* One locking position approx. every 500 mm in the extension
* 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN)
* 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN)
* Folding extensions, approx. 230 mm per side (WITHOUT wooden planks)
* Extension planks, loose, framed in steel
* Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included
* 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN)
* 2 pairs of screw rings M24 (LC 8,000 daN) included
REAR RUNNING GEAR:
* Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear
* PENDULUM AXLE, all axles hydro-mechanically force-steered
* Hose rupture valve on axle compensation cylinder with automatic reset function
* Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position
* Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* 245/70 R 17.5 3PMSF. Brand at our discretion
* Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit
* 4 pairs
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMegamax Tiefbett 2x10 t, Bolzen-Laschen-Kupplung
Ara
Durum: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
Gooseneck
* Gooseneck in SNT design for optimized deck length
* Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable
* Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2
Tanker deck
* Low bed designed as extendable tanker deck in SUPER LOW design
* Length approx. 6,850 mm
* with mechanical locking
* Supply lines are protected in extendable beams and automatically adjust to the respective low bed length
Rear running gear
* In short version with closed outer frame and checker plate cover
* Running gear with excavator trough, this is closed in the rear section to house air tanks
Axles
* BPW axles and suspension, all axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
Tyres
* GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F)
Lhedsv Sw E Aspfx Acwjh
Braking system
* Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit
Paintwork
* 6-coat treatment
* Complete steel structure shot-blasted after welding
* 1 layer zinc-based primer
* 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax
Trailer color
* RAL 3002 Carmine Red
* Rim color: Silver-grey
* Sidewall color: Natural Aluminum
Accessories included
* Plug-in steel front wall, approx. 400 mm high
* 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall
* Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN)
* 2-inch king pin
* Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly
* Air connection with air gun on the gooseneck
* 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks
* 1 lashing ring each left and right on the front cross member (LC 10,000 daN)
* On the outer beams of the loading area, provisions for removable load floor
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN)
* Cutouts in the upper chord of the outer beams above the lashing rings
* Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers
* Outer beams of the low bed coated with anti-slip sand layer
* 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit
* 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN)
* Chamfered front and rear a
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett (Baggerbett)
Ara
Durum: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment specification. Complete equipment details available on request.
Gooseneck
* Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4.
3-Axle Compact Front Bogie
* Hook mounts at front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Excavator Deck
* Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
5-Axle Rear Bogie
* Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear
Lhodjuvbdtepfx Acwjh
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendle axle
Front Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle
5-Axle Rear Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey
Including Accessories
* Steel front wall, approx. 400 mm high
* Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish
* 3.5 kingpin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connectors on gooseneck
* BEKA-MAX central lubrication for one 3-axle bogie
* One 7-pin socket left and right at rear of the front bogie for warning panels
* Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension
* Steel mattresses with rubber flooring, approx. 12 mm thick
* One 7-pin socket left and right, front and rear on rear bogie for warning panels
* BEKA-MAX central lubrication for one 5-axle bogie
* Socket on rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
*
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Ara
Durum: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website.
Excerpt from the equipment - full specification upon request.
Loading area:
- Low-bed with central beam, extendable version, length approx. 6,750 mm
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN)
Gooseneck:
- Gooseneck hydraulically raisable/lowerable and detachable
Rear running gear:
- Rear running gear, short design, with closed outer frame and tread plate cover
- Running gear with excavator recess, rear half closed to accommodate air tanks
Lhedpfxjxf Silj Acwoh
- 2 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN)
Axles:
- BPW axles, hydro-mechanically forced-steered
- Air suspension with lift and lower valve
Tyres:
- Tyres 245/70 R 17.5 3PMSF
- TPMS: Tyre Pressure Monitoring System according to ECE R 141
Braking system:
- Wabco braking system according to EU regulations, with EBS-E (2S2M)
Paintwork:
- High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red
Including the following additional equipment:
- 2 king pins
- Galvanized steel front wall, height approx. 400 mm
- Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit)
- Electro-hydraulic power unit
- Load manometer for axle load determination, incl. load diagram
- On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
- Separate air connection with air gun on the gooseneck
- 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right
- 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
- 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear
- Galvanized extensions, extendable by approx. 230 mm per side
- Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals)
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover
- 2 pairs of WADER container pockets in the loading area, for 1 x 20' container
- 1 removable galvanized intermediate platform with 1 pair of WADER container pockets
- 1 pair of steel ramps to bridge the pick-up hooks of the low-bed
- Sand coating on the loading area as slip protection
- HRM metallization (High Resistance Metallization)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Ara
Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Partial equipment list. Full specifications available on request.
Gooseneck:
- Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, approx. 30 mm thick
Loading area:
- Telescopic loading area with rear bevel approx. 1,000 mm x 8°
- Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
- Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each)
- 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN)
- 4 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
Tyres 235/75 R17.5 3PMSF, brand at our discretion
- TPMS tyre pressure monitoring system according to ECE R 141
- Data transmission to the truck via the standardised EBS interface per ISO 11992
- For correct display, the truck must be capable of transmitting and displaying this data.
Axles:
- BPW axles and suspension, 2 fixed axles, 3rd axle self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activatable via reverse gear and manually
Ledpfxew Tpq Do Acwshh
- Air suspension with lift and lower valve. Axle tools
Brake system:
- WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Electrical system:
- Electrical system in accordance with EU regulations
- LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Steel structure:
Steel frame made of high-strength fine-grain steels.
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- Entire steel structure is automatically blasted after welding using a turbine blasting system
- Second blasting with corundum for optimal coating adhesion
- HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection
- Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White
- No metallic paint possible
- Paint finish tested in salt spray test per ISO 9227-NSS
- Sealing of cavities with special wax
Including the following accessories:
- Mounts for warning signs on both sides at the gooseneck and at the rear, including socket
- Spare wheel holder in front of the front wall (without spare wheel)
- 2-inch kingpin
- Galvanized steel front bulkhead, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection panel
- Galvanized folding supports under the loading area bevel
- Hardwood impact protection on the rear wall from gooseneck to loading platform
- 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN)
- Aluminium side walls and tailboard on the gooseneck
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Ara
Durum: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load Platform
* Double extendable version with rear chamfer approx. 500 mm x 8°
* 6 pairs of outward folding lashing rings (LC 5,000 daN)
* 4 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 1 cross table approx. 250 mm
* Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles
* Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN)
Axles
* BPW axles and suspension, all axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with lift and lower valve
* Axle tool kit
Tyres:
* Tyres 245/70 R 17.5, load index (146/146 F)
* Brand of our choice
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake System:
* Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Paintwork:
High-quality, durable corrosion protection
* High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)
Steel Construction:
Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations
* Lighting 24 volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Including the following additional equipment:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings at the galvanized front wiring panel
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power unit
* Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit)
* Rear gooseneck mounting point for aluminum loading ramps
* Rear hanging rail for aluminum loading ramps
* Galvanized folding supports under the rear chamfer of the load platform
* On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H)
* Removable galvanized rear stanchions (body length approx. 2,560 mm)
* Tool box, galvanized, integrated in the chamfered gooseneck
* 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers
Ljdpfx Acsw Tprzswjhh
* 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area
* Galvanized wideners, extendable by approx. 230 mm per side
* Movable hanging rails for aluminum loading ramps at the rear of the vehicle
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump
* 2 LED reversing lamps mounted on the rear panel
* HRM Metallization (High Resistance Metallisation). Complete steel structure sh
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 205er
Ara
Durum: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck
* With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading platform
Loading platform in extendable design
* 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN)
* 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate
Landing legs
* JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Axles
* BPW axles, two rigid, two self-steering trailing axles, with drum brakes
* Air suspension with lifting/lowering function
* Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually
* Tyres: 205/65 R 17.5
Brake system
* Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit
Steel construction
* Made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Paintwork
* First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red
* Rear section metallized and painted in RAL 9010 (Pure White)
* Wheel rims in silver
Included accessories
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
Lsdpfx Asu Sd U Uocwshh
* Spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection bar at the front
* 4 wheel chocks with holder set on the front wall
* Mount at the rear of the gooseneck for aluminum loading ramps
* Galvanized folding supports under the loading platform bevel
* Holder for beacon light at the rear of the trailer
* Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations
* On both sides of the gooseneck and rear panel, holder for warning plates including socket
* TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data
* On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* Galvanized toolbox integrated into the beveled gooseneck
* 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container
* Sliding mounting rails for aluminum loading ramps at the rear of the vehicle
* 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* Galvanized crosswise holder under the loading platform
* Galvanized extendable wideners, extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition
* 5 pairs of rec
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
NooteboomOSD-50-04-V EXTENDABLE SEMI DIEPLADER/TIEFLADER...
Ara
Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, ilk tescil: 08/1994, renk: sarı, Üretim yılı: 1994, Donanım: ABS, = Additional Options and Accessories =
- Air suspension
= Further Information =
Axle Configuration
Rear axle 1: Twin tyres
Rear axle 2: Twin tyres
Rear axle 3: Twin tyres; Steering
Rear axle 4: Twin tyres; Steering
Weights
Unladen weight: 11,420 kg
Functional
Load platform height: 77 cm
Extendable body: Yes
Condition
Technical condition: Very good
Visual condition: Very good
Financial Information
Price: On request
NOOTEBOOM OSD-50-04-V SEMI LOWLOADER
4X SAF AXLES
2X STEER AXLES (FOLLOW-UP)
AIR SUSPENDED
TYRE SIZE 205/65/R17.5
EXTENDABLE LOAD PLATFORM
DIMENSIONS 923 CM + 670 CM EXTENDABLE, TOTAL LENGTH OF LOAD PLATFORM 1,593 CM
WIDTH OF LOAD PLATFORM 275 CM +2X 27.5 CM SIDE EXTENSIONS, TOTAL WIDTH OF LOAD PLATFORM 330 CM
HEIGHT OF LOAD PLATFORM APPROX. 77 CM LOADED
Lhodpfx Aouxy Dfscwsh
GOOSENECK LENGTH 388 CM
LASHING EYES AND STAKE POCKETS
2X REAR SUPPORTS
FOLLOW US ON INSTAGRAM: GEURTSTRUCKS
WE SPEAK GERMAN
HABLAMOS ESPANOL
WE SPEAK ENGLISH
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
DansonHLB45 2-AXEL EXTENDABLE SEMI DIEPLADER/TIEFLADE...
Ara
Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2018, renk: kırmızı, Üretim yılı: 2018, Donanım: ABS, = Additional Options and Accessories =
- Air suspension
= Further Information =
Rear axle 1: Dual wheels
Rear axle 2: Dual wheels; Steering axle
Unladen weight: 8,940 kg
Loading platform height: 90 cm
Extendable body: Yes
Technical condition: very good
Visual condition: very good
Price: On request
DANSON HLB45 2-AXLE EXTENDABLE SEMI LOWBED TRAILER
2X SAF AXLES
1X SELF-STEERING AXLE (FOLLOW-UP)
TYRE SIZE 245/70/R17.5
EXTENDABLE LOADING PLATFORM
DIMENSIONS: 740 CM + 500 CM EXTENDABLE, TOTAL PLATFORM LENGTH 1,240 CM
PLATFORM WIDTH: 255 CM + 2X 102.5 CM EXTENDABLE, TOTAL PLATFORM WIDTH 460 CM!!!
PLATFORM HEIGHT: approx. 90 CM
GOOSENECK LENGTH: 40 CM
HOOK EYES, KINGPINS, TWISTLOCKS
FOLLOW US ON INSTAGRAM: GEURTSTRUCKS
Lhedeux Ad Uepfx Acwjh
WE SPEAK GERMAN
HABLAMOS ESPAÑOL
WE SPEAK ENGLISH
Küçük ilan
Dabrowa k/Opola
1.891 km
Scania G450 XT 4x4 EURO6 CIĄGNIK SIODŁOWY Z HYDRAULIKĄ WYWROTU
ScaniaG450 XT 4x4 EURO6 CIĄGNIK SIODŁOWY Z HYDRAULIKĄ...
Ara
Durum: ikinci el, kilometre: 412.604 km, güç: 331 kW (450,03 bg), lastik boyutu: 385/65 R22.5, dingil konfigürasyonu: 4x4, dingil mesafesi: 3.900 mm, renk: sarı, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, toplam uzunluk: 5.900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Üretim yılı: 2020, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, merkezi kilitleme, çekiş kontrolü, - Güneşlik
- Isıtma
- Klima kontrolü
Lhsdpfszf U Spox Acwoh
- Radyo
- Tavan camı
Küçük ilan
Nowy Sacz
1.656 km
Damperli kamyon
SCANIAG 450 XT * Kipper + BORDMATIC* TOPZUSTAND / 8x4
Ara
Durum: ikinci el, kilometre: 408.000 km, güç: 331 kW (450,03 bg), ilk tescil: 07/2019, yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, renk: beyaz, vites türü: otomatik, yükleme alanı uzunluğu: 5.750 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2019, Donanım: ABS, klima, Scania G 450 XT / 8x4
DAMPER + BORDMATIC
Kazasız
İyi durumda!
? ÜRETİM YILI: 2019
? KİLOMETRE: 408.000 km
DONANIM:
? ABS
? ELEKTRİKLİ CAMLAR
? HİDROLİK DİREKSİYON
? TAKOGRAF
Lhjdpfx Acjy Hn Ayjwsh
KAPASİTE: 17.000 kg
TOPLAM AĞIRLIK: 32.000 kg
AKS MESAFESİ: 198/237/136 cm
LASTİK EBATI: 13R22,5
SÜSPANSİYON: YAYLI
TEL:
KUBA - POLONCA, İNGİLİZCE, ALMANCA, İTALYANCA
SEBASTIAN - POLONCA, ALMANCA, İTALYANCA, ????
LASZLO - MACARCA
COSTEL - ROMENCE
(Tüm ihracat işlemlerini ve plaka teminini yapıyoruz)
RADEK - ????
Ref. nr: 7552
Küçük ilan
Nowy Sacz
1.656 km
Damperli kamyon
SCANIAP 410 XT * Kipper * 8x4 * TOPZUSTAND !
Ara
Durum: ikinci el, kilometre: 330.000 km, güç: 302 kW (410,61 bg), ilk tescil: 07/2020, yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, renk: beyaz, vites türü: otomatik, Üretim yılı: 2020, Donanım: ABS, klima, Scania P 410 XT / 8x4
DAMPERLİ KAMYON
Kazası YOK
İYİ DURUMDA!
• Üretim Yılı: 2020
• Kilometre: 330.000 km
DONANIM:
• ABS
• Elektrikli camlar
• Hidrolik direksiyon
• Takograf
KAPASİTE: 20.000 kg
TOPLAM AĞIRLIK: 32.000 kg
DİNGİL MESAFESİ: 197/235/136 cm
LASTİK EBATI: 13R22,5
SÜSPANSİYON: Yaprak yay
TEL:
* Kuba – Lehçe, İngilizce, Almanca, İtalyanca
* Sebastian – Lehçe, Almanca, İtalyanca, ?????
* Laszlo – Macarca
* Costel – Rumence
(Romence: Ihracat için tüm işlemler tarafımızdan yapılır ve plaka dahil.)
Lhodoy Acqdspfx Acwsh
Radek – ?????
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Dabrowa k/Opola
1.891 km
Scania G450 XT 4x4 EURO6 CIĄGNIK SIODŁOWY Z HYDRAULIKĄ WYWROTU
ScaniaG450 XT 4x4 EURO6 CIĄGNIK SIODŁOWY Z HYDRAULIKĄ...
Ara
Durum: ikinci el, kilometre: 375.821 km, güç: 331 kW (450,03 bg), lastik boyutu: 385/65 R22.5, dingil konfigürasyonu: 4x4, dingil mesafesi: 3.900 mm, yakıt deposu kapasitesi: 400 l, renk: sarı, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, toplam uzunluk: 5.900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Üretim yılı: 2020, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, sisal lambaları, çekiş kontrolü, - Güneşlik
Lhjdpfszdqi Iox Acwsh
- Isıtma
- Klima kontrolü
- Radyo
- Tavan camı
- Çift tekerlek dingili
Küçük ilan
Eilenburg
2.237 km
Araba römorku
STEMAWOM STS XT .1 Absenkanhänger 100KMH
Ara
Durum: ikinci el, azami yük ağırlığı: 334 kg, toplam ağırlık: 1.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/2026, yükleme alanı uzunluğu: 2.530 mm, yükleme alanı genişliği: 1.300 mm, yükleme alanı yüksekliği: 80 mm, toplam genişlik: 1.995 mm, toplam yükseklik: 400 mm, A35 GW26GA00006
İndirme römorku, üretici: STEMA, Tip: WOM STS XT .1
Toplam ağırlık: 1.000 kg,
Alçak şasi, hidrolik olarak indirilebilir, kendinden frenli
* Yeni kinematikli döner dingil
* Destek tekerleği
Lhodjyn Ugaepfx Acwoh
* Hidrolik el pompası
* Entegre tırabzanlı, son derece sağlam kaynaklı şasi
* Ek orta sabitleme rayı
* Suya dayanıklı kontrplak zemin
* Geri vites ve sis farlı modern Multipoint III aydınlatma
* STEMA güvenlik V-çekişli, sağlam, sıcak daldırma galvanizli şasi ile mükemmel yol tutuşu
* 2 takoz
* 2 çamurluk
* Patentli katlanabilir plaka taşıyıcı
* Araç hazırlanmadı...ve daha fazlası.
Hatalar ve ara satış hakkı saklıdır.
Küçük ilan
Dabrowa k/Opola
1.891 km
Scania G450 XT 4x4 EURO6 CIĄGNIK SIODŁOWY Z HYDRAULIKĄ WYWROTU
ScaniaG450 XT 4x4 EURO6 CIĄGNIK SIODŁOWY Z HYDRAULIKĄ...
Ara
Durum: ikinci el, kilometre: 370.268 km, güç: 331 kW (450,03 bg), lastik boyutu: 385/65 R22.5, dingil konfigürasyonu: 4x4, dingil mesafesi: 3.550 mm, yakıt deposu kapasitesi: 400 l, renk: sarı, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik, toplam uzunluk: 6.290 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.330 mm, Üretim yılı: 2021, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, klima, merkezi kilitleme, sisal lambaları, - Isıtma
Lhsdpfx Acezcz Dujwoh
- Klima kontrolü
- Radyo
- Tavan camı
- Çift tekerlek dingili
Küçük ilan
Dabrowa k/Opola
1.891 km
Damper
ScaniaP420 XT 8X4 EURO6 WYWROTKA MEILLER KIPPER 18,5m3
Ara
Durum: ikinci el, kilometre: 251 km, güç: 309 kW (420,12 bg), lastik boyutu: 315/80 R22,5, dingil konfigürasyonu: 8x4, dingil mesafesi: 6.000 mm, renk: kırmızı, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik, toplam uzunluk: 9.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.180 mm, Üretim yılı: 2025, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, klima, merkezi kilitleme, - Klima kontrolü
- Radyo
Lhedsw S Arlepfx Acweh
- Tavan camı
Sizin için aramayı kolaylaştırıyoruz: "euramobil xtura xt 686 ef, dachklima"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.




























































































































































































































































































