Kullanılmış Müller-Mitteltal 14,4 To, Tand - Plateau- Tieflader, Hydr. Rampen satın al (36.887)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
Ara
Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Suspension:
* Air suspension with manual rear lowering
----Axles:
* 3 x 11 t Gigant axles
* Center axle liftable
----Towing Bar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* LED rear lights
* 15-pin power connector
* TPMS (Tire Pressure Monitoring System)
----General Attachments:
* Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm)
* Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm)
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic impact protection buffers
* Mechanical drop-down supports at rear
----Container / Low Loader Deck:
* Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide roll-off containers
* Steel floor with roller recesses in the bogie area
* When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible
* Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the tracks
* Load certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. 10 m³ volume possible
* Includes 8 repositionable skip stops for lateral centering of skips, front 4 stops plug-in with articulated buffer
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on the sides for securing skips with tensioning elements (positive and frictional locking)
* 4 cloverleaf lashing rails on the sides and 1 pair of 13.4 t UVV lashing rings at the front
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
----Ramps:
Hjdotplv Topfx Aifonk
* Welded bead anti-slip surface in the inclined ramp area
* 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Tyres:
* Tyres: 235/75 R17.5
----Ride height:
* Loaded ride height approx. 1,003 mm
----Payload:
* Payload 18,900 kg
----Paintwork:
* Contour tape side and rear, reflective
* Axles, turntable, drawbar, and air tanks painted in black tone
* Hot-dip galvanized main frame
----Info:
* Technically permissible gross weight: 27,000 kg
* New vehicle, unregistered, with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 20/2026
Küçük ilan
Alsdorf
2.622 km
Çalışma platformlu römork
MÜLLER-MITTELTALETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Ara
Durumu: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-loader | Drive-over platform trailer
Reference number for inquiries: 11630
Available immediately from stock in Alsdorf
New vehicle including COC
* Gross weight: 21t, Payload: 16.50t, galvanized chassis
* Platform version with 400 mm high front wall, ramp safety by ramp holding rods and diagonal bracing
* Version: GVW 21t, reinforced frame and axles, axle spacing 1,810 mm
* Loading floor height approx. 910 mm loaded / approx. 940 mm unloaded
Hnodpfx Asyvxg Ueifek
* 7 m loading platform with 400 mm high front wall
* Extended ramps: 3 m ramps, hot-dip galvanized, one-piece, with hot-dip galvanized grating
* Ramp lift with vertically mounted, adjustable springs for easy one-man operation
* Load securing package:
* 4 pieces UVV anti-fall lashing brackets (LC 8,000 daN) mounted to existing hole pattern in 45° outer frame; positioning: approx. 1m inset from front and rear cross-member
* 10 pieces UVV lashing brackets LC 3000 daN, retractable into existing hole grid in outer frame
* 2 UVV lashing rings each, at the front and rear, recessed into cross-member, LC 10,000 daN
* Additional lashing options through holes (Ø 50 mm, LC 1,200 daN) in front and end cross-members
* Provision for retrofitting container locks (container locks available at extra charge)
* 50 mm thick softwood flooring
* Gigant air suspension axles including EBS 2S/2M, lifting and lowering
* 235/75R 17.5 (8x) twin tires with tire pressure monitoring sensor
* Plastic toolbox on the right in direction of travel, in front of the front wall
* LED lighting system
* 7-pin socket at rear, wired for oversize light bar with rear lights (58 R) and ground
* 2 LED reversing lights at rear
* Flashing side marker lights
* Warning board for oversize load
* 1 removable revolving LED beacon, including holder and installation
* Foldable support legs at the rear, support foot at front with geared winding mechanism
---
Example hire purchase offer from our partner MMV Leasing: €655/month net for 60 months, no down payment and "0" euro residual value
Other terms with/without down payment/residual value available!
We are a MüllerMitteltal sales partner.
---
Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside these hours, we are available by appointment.
* We speak German, English, Russian, Polish, French.
* WhatsApp
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
Ara
Durumu: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lift and lower function and RtR valve
* Smard-Board for load weight measurement
* Warning panel packages at front & rear
* Side and rear reflective contour tape
* Rotating beacon (removable) at rear
* LED lamp
* Straight drawbar with 50 mm towing eye and infinitely adjustable height setting
* Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side
Hedpfx Aijl Tik Nefonk
* Closed individual plastic mudguards at the front
* Straight steel mud flaps with splash guards at the rear (spray suppression)
* Side underrun protection
* Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable
* Chassis made of high-strength fine-grain steel
* Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood
* Outer planks of the drive-on ramps made of hardwood
* Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability
* Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform
* Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable
* Loadable in all directions and recessed into the outer frame
* Two pairs of 6.4 t lashing rings at the excavator stick recess on each side
* 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope)
* Widening planks stored in side left storage compartment
* Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm
* Mechanical support legs at the rear
* Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve
* Loading area above slewing ring: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,780 x 2,520 mm
* Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope)
* Flow divider installed
* Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized
* Axles, drawbar, air reservoir and slewing ring painted in black
* Tires 235/75 R 17.5
* New vehicle without first registration with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf, on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
Ara
Durumu: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lifting and lowering system and RtR valve
* Smard on-board system for load weight determination
* Warning panel packages at front & rear
* Reflective contour marking tape on sides and rear
* Removable rear rotating beacon
* LED lights
* Straight drawbar with 50 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, mounted on the right side
* Front: closed single fender in plastic
* Rear: straight steel mudguards with spray suppression (spray mist reduction)
* Side underrun protection
* Extension of the bogie platform at the front by 520 mm with 45° corners and 3 integrated storage compartments including lids, lockable
* Chassis made of high-strength fine-grained steel
* Floor above bogie platform: 50 mm softwood; deep bed platform: 60 mm softwood
* Outer planks of access ramps made of hardwood
* 4 stake pockets per side (no stakes present), each with 2 t lashing capacity
* Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform
* At the side, front and rear: 2 pairs each of 13.4 t lashing rings on the outer frame; also, 4 pairs per side of 10 t lashing rings, swivel and lowerable
* Loadable in all directions and recessed into the outer frame
* 2 pairs of 6.4 t lashing rings at the excavator arm rest
* 8 pairs of galvanized fold-out outriggers for 3-meter total width (not in the rear slope)
* Widening planks for the left side stored in a compartment
Hedpfjl Tphrox Aifonk
* Excavator arm rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm
* Mechanical rear supports
* Hydraulic folding ramps with hydraulically adjustable tip section approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting & load-holding valve
* Loading area above slewing ring: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,780 x 2,520 mm
* Loading height (loaded): approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope)
* Flow divider installed
* Chassis, bogie, access ramps, fold-out outriggers and mechanical rear supports hot-dip galvanized
* Axles, drawbar, air tank and slewing ring painted in black
* Tires: 235/75 R 17.5
* New vehicle without first registration, includes manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf, A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Lateral underrun protection
* Rear swivel supports on the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards
* Reflective contour tape on the sides and rear
* Folding lid (hot-dip galvanized) for toolbox on the turntable platform
Hnodpex Ipbgsfx Aifek
* Multi-voltage system
* LED rear lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* 15-pin power connector
* Four stake pockets on each side (stakes not included), each with additional lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame — in the corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear bevel)
* Widening planks stored in the center of the loading area
* Excavator arm rest over rear axle up to the end carrier, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the arm rest)
* Hydraulically operated one-piece ramp (approx. 3,000 x 720 mm)
* Hydraulic ramp lateral displacement
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unladen: approx. 910 mm (including 860 mm approach ramp)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black finish
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technically permitted gross weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available immediately ex works Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalizer
* Side underrun protection
* Swing-down supports at rear of chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards
* Contour marking tape on sides and rear, reflective
* Folding lid (hot-dip galvanized) for tool box on the bogie platform
* Multi-voltage system
* LED tail lights
* Rotating beacon (removable) at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electric plug
* Four stake pockets on each side (no stakes present), can also be used for lashing
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame; in the corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m total width (not on rear chamfer)
* Widening planks stored in the middle of the loading area
* Excavator arm storage above rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm storage)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulically adjustable lateral ramp shift
* Loading area above the slewing ring: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, bogie, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
Hodpfx Ajx Ipb Heifenk
* 5,900 kg unladen weight
* --Permissible total weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf on the A7
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜ-TA-R 21 Plateau 7m, luftgefedert, LED
Ara
Durumu: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer
Ref. for inquiries: 27963, available end of March 2026
NEW VEHICLE including COC
* GVW: 21t, Payload: 16.50t, galvanized chassis
Hodpfx Aioyuq R Uefonk
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports
* Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm
* Platform height approx. 910 mm loaded / approx. 940 mm unloaded
* Load area: 7,000 mm with 400 mm high front wall
* Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating,
* Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation
* Load securing package (La-Si-Paket):
* 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members
* 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame
* 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN
* Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members
* Prepared for retrofitting container locks
* Softwood (spruce/fir) floor, 50 mm thick
* Gigant axles with air suspension including EBS 2S/2M
* Lifting and lowering function
* 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors
* 1 plastic toolbox positioned in driving direction right, in front of the front wall
* LED lighting system
* 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground
* 2 LED reversing lights at the rear
* Flashing side marker lights
* Oversize load warning sign
* 1 removable all-round LED beacon including holder and installation
* Rear folding supports, front support foot with gear winch
----
Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value
Other terms with/without down payment or residual value are possible!
We are an authorized MüllerMitteltal dealer
----
* Our opening hours:
* Mon-Thu: 08:00-17:00
* Fri: 08:00-15:00
* Outside these hours, we are available by appointment
* We speak German, English, Russian, Polish, and French
* Leasing, financing, trade-in possible
Küçük ilan
Lübbecke
2.526 km
Alçak dorse
Müller-MitteltalTieflader
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS
Daha fazla bilgi için lütfen bizimle iletişime geçin.
Hedpfxoxt Rw Ro Aifenk
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durumu: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
3 in 1 = for roll-off containers, skip containers, and use as low loader
----Braking system:
* EBS-E (electronic braking system)
* Emergency release device for spring-type cylinders
* Drum brakes
Hjdpfx Aol Tld Ieifonk
----Axles:
* 2 × 10.5 t axles
----Suspension:
* Air suspension with manual lowering at rear
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), indication in the truck via EBS signal (without truck-side installation)
* LED tail lights 12/24 V
* 15-pin power connector
----General attachments:
* Tool box made of powder-coated sheet steel
* Spare wheel carrier in basket design on the right side
* Closed side underrun protection
* Plastic quarter mudguards with spray protection
* Rear plastic impact buffers
* Folding A-plate at rear
----Loading area:
* Hot-dip galvanized main frame with raised outer frame for guiding roll containers
* Steel floor with roller recesses in the bogie area
* Transport of roll-off containers with container length from 5,500 mm to 7,000 mm possible
* Pneumatic 4-way clamp locking and mechanical plug-in stop angles at the front of the guide rails
* Transport of up to 2 skip containers with a maximum volume of 10 m³ possible
* Includes 8 relocatable skip stops for lateral centring, front 4 skip stops are plugged in with tiltable stops
* Weld bead as anti-slip coating in the drive-on ramp area
* Mechanical drop-down supports at the rear
----Load securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and non-positive securing of skips; 4 cloverleaf-style lashing cleats on each side
* 1 pair of 13.4 t UVV lashing rings at the front
* Each side fitted with 4 × 8 t lashing loops recessed in the outer frame
----Ramps:
* Aluminium approach ramps (10.6 t / pair), 2,800 × 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear)
----Paintwork:
* Reflective contour tape on sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Notes:
* Load securing certificate according to DIN 30722-1
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* --Perm. total weight of 20,000 kg technically possible--
* New vehicle without initial registration with manufacturer’s warranty
* Errors and intermediate sale excepted
----Delivery time:
* Immediately available from Egstorf
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durumu: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
* 3-in-1 – suitable for hooklift, skip containers, and as a low-loader
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10.5-ton axles
----Suspension:
* Air suspension with manual rear lowering
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
Hnedpowb Rakjfx Aifjk
* TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required)
* LED tail lights 12/24 V
* 15-pin electrical connector
----General Attachments:
* Tool box made of powder-coated steel plate
* Spare wheel carrier in basket design on right-hand side
* Enclosed side underrun protection
* Quarter mudguards with splash guards made of plastic
* Plastic rear impact protection buffers
* Folding A-board at rear
----Loading Platform:
* Hot-dip galvanized main frame with raised outer frame to guide roll containers
* Steel plate floor with roller recesses in the bogie area
* Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm
* Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails
* Transport of up to 2 skip containers with max. 10 m³ possible
* Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable.
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop-down supports
----Load Securing:
* 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets
* 1 pair of 13.4-ton UVV lashing rings facing towards the front
* Four 8-ton lashing eyes per side integrated into the outer frame
----Ramps:
* Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Painting:
* Reflective contour tape, sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Information:
* Load securing certificate according to DIN 30722-1
* Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight of 20,000 kg technically possible
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egstorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durumu: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
3 in 1 – for roll-off containers, skip containers, and as a low-loader
----Braking system:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10.5 t axles
----Suspension:
* Air suspension with manual rear lowering
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm length, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), can be displayed in the truck via EBS signal (no need for truck-side installation)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General equipment:
* Tool box made of powder-coated sheet steel
* Spare wheel holder in cage design on right side
* Closed side underrun protection
* Plastic quarter mudguards with spray protection
* Plastic rear impact protection buffers
* Foldable A-sign at the rear
----Loading platform:
* Hot-dip galvanized main frame with raised outer frame to guide roll containers
* Steel floor with recesses for rollers in the bogie area
* For roll-off container transport, container length from 5,500 to 7,000 mm possible
* Pneumatic 4-point locking clamps and mechanically insertable stop angles at the front of the track
* Can transport up to 2 skip containers with a maximum volume of 10 m³
* Includes 8 repositionable skip stops for lateral centering, front 4 are pinned with pivoting stop
* Weld bead as anti-slip surface in the inclined ramp area
* Mechanical drop-down supports at the rear
----Load securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips, 4 lashing cleats in cloverleaf design on each side
* 1 pair of 13.4 t UVV lashing rings at the front
* 4 x 8 t lashing eyes per side recessed into the outer frame
----Ramps:
* Aluminum drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Painting:
* Reflective contour tape on sides & rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Info:
* Load securing certificate according to DIN 30722-1
* Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* --Permissible total weight of 20,000 kg technically possible--
Hnedpfx Ael Tnwzjifok
* New vehicle without initial registration, comes with manufacturer’s warranty
* Errors and subject to prior sale
----Delivery time:
* Available immediately from Egstorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Swing-down supports at the rear on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
Hnjdpfx Aol Thxdeifsk
* Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each equipped with spray protection
* Contour tape on the sides and rear, reflective
* Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power connector
* Four stake pockets on each side (no stakes included) with lashing points
* Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and recessed, loadable in all directions and integrated into the outer frame – 13.4 t load capacity in the corners, otherwise 10 t
* Six pairs of mechanical folding outriggers for a total width of 3 m (not on the rear slope)
* Extension planks stored in the center of the loading bed
* Excavator boom support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom support)
* One-piece hydraulic loading ramps (approx. 3,000 x 720 mm)
* Four-section control block for future retrofitting of hydraulic ramp shift
* Mechanical lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* -- Gross weight of 30,000 kg technically possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from calendar week 18/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underride protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirting with splash guards
* Reflective contour tape on the sides and rear
* Folding lid (hot-dip galvanized) for toolbox on the bogie platform
* Multi-voltage system
* LED taillights
* Detachable beacon at the rear
* Towing scissors with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin power connector
* Four stake pockets per side (stakes not included), also usable as lashing points
* Load Securing Package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, others 10 t
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper)
* Widening planks stowed in the center of the loading area
* Excavator arm rest above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest)
* One-piece hydraulic ramps (approx. 3,000 x 720 mm)
* 4-section control block for future retrofitting of hydraulic ramp shifting
* Mechanical lateral ramp shifting
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (incl. 860 mm approach slope)
* Chassis, bogie, towing scissors, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technically permissible gross weight: 30,000 kg--
* Vehicle is hot-dip galvanized
Hnodpfsl Th Adox Aifsk
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from CW 18/2026
Küçük ilan
Alsdorf
2.622 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R 11,9 Dreiseiten-Kipper mit Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps
Reference Number: 11612
* NEW VEHICLE, not yet registered, now available in RAL 9016 traffic white
* Door-to-door delivery available for an additional charge!
* Gross weight: 11,900 kg, payload: 8,750 kg
* Galvanized floor, 5m x 2.42m x 0.5m; side boards can swing, fold down, and be removed; prepped for later retrofit side board extensions
* Front wall hot-dip galvanized
* Lockable compartment under the tipping platform for loading ramp
* Includes loading ramps 3.31m, 8t per pair
* 4 UVV lashing rings LC 5000 daN at front and rear
* 8 recessed, folding lashing eyes LC 3000 daN mounted in the tipper floor (centered)
* Net hooks
* Drawbar continuously height-adjustable, hot-dip galvanized, towing eye 40mm
* Galvanized chassis
* Tires: 235/75R 17.5 (x4), BPW axles, parabolic springs
* Tire pressure monitoring
* EBS (Electronic Braking System)
* LED lighting system for 12+24 Volt
* Side marker lights with indicator activation
* Bolted, galvanized rear stanchions
* Excavator bucket holder mounted on the front wall
---
Please request an individual quote from us! Additional equipment options available.
Financing from just €405 net for 72 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner"
---
Our Opening Hours
Hodpfx Aeyl Ebpeifsnk
Monday - Thursday: 08:00 - 17:00
Friday: 08:00 - 15:00
Outside of business hours, appointments can be arranged.
WhatsApp
Leasing, financing, and trade-ins possible---
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.
Ara
Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Rear axle is self-steering with electro-pneumatic steering lock
----Suspension:
* Air suspension with lifting and lowering system as well as Run-on-Ready (RtR) valve
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard control panel mounted on trailer as an infotool with pressure sensors for axle load display
* 15-pin power socket
* LED lighting system 12 / 24V
* Rear left removable LED beacon
----General Attachments:
* Lateral underrun protection
* Front landing gears and mechanical swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel carrier under chassis, right side
----Low Loader Deck:
* Fifth-wheel platform with 45° chamfered front corners and toolbox at the front made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid
* 400 mm high aluminium drop sides (RAL 9010 pure white) on the sides of the fifth-wheel platform, foldable and removable
* 150 mm high removable rear drop board
* Rear slope on the fifth-wheel platform to the low bed, approx. 700 mm long
* Fifth-wheel platform with 50 mm timber planks, low-bed platform with 60 mm timber planks
* Chequer plate over the axles
----Extensions:
* 8 x mechanical folding extensions to a total width of 3 m, but not on the rear slope (extension boards included, with storage on the fifth-wheel platform)
* Mechanically adjustable warning sign sets front and rear
----Load Securing (Lashing Package):
* On the fifth-wheel platform, each 2 x 6.3 t lashing points and 3 x 5 t lashing bars on each side of the outer frame
* On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame
* Each side 2 x 6.4 t lashing eyes and 1 lashing point in the excavator arm recess at the rear
* 2 x container locks directly after the step in the low-bed platform
----Excavator Arm Recess:
Hnedpfxjpk D I Ao Aifsk
* Continuous excavator arm recess from end of last rigid axle over steering axle to end cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm
----Ramps:
* Mechanically single-piece, hot-dip galvanized, hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way valve block for future retrofit of hydraulic ramp sliding by customer
* Outer plank on ramp made from 50 mm hardwood
* Climbing strips on outer frame of ramp and on approach slope
----Hydraulics:
* Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min)
----Loading Dimensions:
* Loading surface of fifth-wheel platform: approx. 3,935 x 2,480 mm
* Low-bed loading surface: approx. 8,500 x 2,520 mm
* Unladen deck height approx. 910 mm (incl. 860 mm approach slope)
----Fifth-Wheel Height:
* Approx. 1,220 mm (suitable for 2-axle and 3-axle tractor units)
----Painting:
* Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized
* Axles, landing gears, air tanks painted in black tone
* Vehicle is hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Errors and intermediate sale excepted
* Sample images may show equipment not included on the offer
----Delivery Time:
* Available from week 26/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.
Ara
Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0:
----Braking System:
Hsdpol Tnvgsfx Aifenk
* Wabco EBS-E (Electronic Braking System)
* Emergency Release Device for Spring-Loaded Cylinders
* Drum Brakes
----Axles:
* 3 x 11 t BPW Eco Plus Axles
* Rear axle with steered trailing axle and electro-pneumatic steering lock
----Suspension:
* Air suspension with lifting and lowering system as well as RtR-valve
----Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon at rear left
----General Attachments:
* Side underrun protection
* Landing gear at the front and mechanical swing supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder under the chassis, right side
----Low Loader Deck:
* Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid
* 400 mm high side aluminum drop sides (RAL 9010 pure white) foldable and removable on the fifth wheel platform
* Rear wall -150 mm- pluggable
* Rear slant on the fifth wheel platform to the low bed, approx. 700 mm long
* Fifth wheel platform with 50 mm timber flooring and low bed platform with 60 mm timber flooring
* Checker plate above the axles
----Widenings:
* 8 x mechanical folding extensions to 3 meters total width, but not in the rear slant (extension planks available and stored on the platform)
* Mechanically adjustable warning panel sets at front and rear
----Load Securing (Load Securing Package):
* On the fifth wheel platform, 2 x 6.3 t lashing rings each, and 3 x 5 t lashing bars per side in the outer frame
* On the low bed platform, 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivotable and lowerable, recessed into the outer frame
* 2 x 6.4 t lashing points per side, and 1 lashing ring in the excavator arm trough at the rear
* 2 x container locks directly after the cranked section in the low bed platform
----Excavator Arm Trough:
* Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the rear crossbeam with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm
----Ramps:
* Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for the customer's retrofitting of hydraulic ramp shifting
* The outer board on the ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp as well as on the entry slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l up to 120 l/min)
----Loading Dimensions:
* Fifth wheel platform loading area: approx. 3,935 x 2,480 mm
* Low bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm entry slope)
----Fifth Wheel Height:
* Approx. 1,220 mm (suitable for 2- and 3-axle tractor units)
----Paintwork:
* Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized
* Axles, landing gear, air tanks painted black
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Sample images may contain equipment features not included in the offered vehicle
----Delivery Time:
* Available from calendar week 26/2026
Küçük ilan
Bovenden
2.411 km
Üç yöne devirmeli römork
Müller-MitteltalKA-TA-R 14,4, Verzinkt, Alu-Bordwände
Ara
Durumu: kullanılmış, boş ağırlık: 3.650 kg, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2011, bir sonraki muayene (TÜV): 08/2024, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 285/70R19.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing rings, underrun protection, front support, rear support, swing tailgates, height-adjustable drawbar.
Hnedpfxsth Uavj Aifek
Body: Tandem 3-way tipper trailer with aluminum drop sides, 2x Gigant axles, drum brakes!
Loading ramps available at an extra charge of €990.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
Ara
Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0:
----Braking System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Suspension:
* Air suspension with manual lowering at the rear
----Axles:
* 3 x 11 t Gigant axles
* Center axle liftable
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device
----Electrics / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS (Tire Pressure Monitoring System)
----General Attachments:
* Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm)
* Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm)
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic bumper buffer
* Mechanical drop-down supports at rear
----Container / Low Loader Platform:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers
* Steel floor with wheel recesses in the bogie area
* Suitable for roll-off containers with lengths from 5,500 to 7,000 mm
* Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails
* Load certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ possible
* Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop
----Load Securing:
* 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips
* 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
----Ramps:
* Weld seam as anti-slip surface in the running rail area of the ramp slope
* 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind)
----Tyres:
* Tyres: 235/75 R17.5
----Ride Height:
* Ride height loaded approx. 1,003 mm
----Payload:
Hnjdpfxspk D Awj Aifok
* Payload 18,900 kg
----Paintwork:
* Reflective contour tape on sides and rear
* Axles, turntable, drawbar, and air tank painted in a shade of black
* Hot-dip galvanized main frame
----Notes:
* Technically possible gross weight of 27,000 kg
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 20/2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
Ara
Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0:
----Braking System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Suspension:
* Air suspension with manual lowering at the rear
----Axles:
Hedopk D Iiepfx Aifsnk
* 3 x 11 t Gigant axles
* Center axle liftable
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device
----Electrics / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS (Tire Pressure Monitoring System)
----General Attachments:
* Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm)
* Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm)
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic bumper buffer
* Mechanical drop-down supports at rear
----Container / Low Loader Platform:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers
* Steel floor with wheel recesses in the bogie area
* Suitable for roll-off containers with lengths from 5,500 to 7,000 mm
* Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails
* Load certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ possible
* Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop
----Load Securing:
* 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips
* 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
----Ramps:
* Weld seam as anti-slip surface in the running rail area of the ramp slope
* 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind)
----Tyres:
* Tyres: 235/75 R17.5
----Ride Height:
* Ride height loaded approx. 1,003 mm
----Payload:
* Payload 18,900 kg
----Paintwork:
* Reflective contour tape on sides and rear
* Axles, turntable, drawbar, and air tank painted in a shade of black
* Hot-dip galvanized main frame
----Notes:
* Technically possible gross weight of 27,000 kg
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 20/2026
Küçük ilan
Schlierbach
2.315 km
Düşük yükleyici
Müller-MitteltalT4 4-Achs Tieflader Radmulden luftgefedert T4 4...
Ara
Durumu: kullanılmış, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile
- 4 x havalı süspansiyonlu GIGANT aks
- havalı süspansiyonlu
- 4 x teker çukuru
- mekanik rampa
- arkada 2 destek, katlanabilir
- uzatılabilir uyarı levhaları
- ABS
- MICHELIN lastikler: 235/75 R 17.5
- ağır model: 40.000 kg azami yüklü ağırlık
Hedpfx Ajwmpbdsifsnk
- boş ağırlık: 8.400 kg
- toplam uzunluk: 11.750 mm
- 50 mm çeki halkası
Özellikle kalk freze makineleri taşımak için uygundur!
- Alman römorku
- Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün!
Hata ve ön satış hakkı saklıdır!
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to, Luft, Seitliche ALU Wände, Rollplane
Ara
Durumu: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18
----Braking System:
* EBS-E (Electronic Braking System with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 9 t Gigant axles
----Suspension:
* Air suspension with level control during tipping operation
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin electrical connector
* LED lighting with galvanized protective canopy
----Drawbar Eye / Drawbar:
* Drawbar with 50 mm flange drawbar eye (adjustable by +77 mm and -33 mm via offset plate)
----General Attachments:
* Front support winch
* Foldable galvanized steel underrun protection for paver feeding
* Closed single-piece plastic mudguards
* Front wall platform made of grating with access step on the drawbar and grab handles on the front wall
----Chassis:
* Chassis made of fine-grain steel
----Tipper Body:
* Steel 3-way tipper body with aluminium sidewalls, asymmetrical — continuous without center stanchion — pivoting via manual central locking, left side drop-down with side wall spring assist
* Rear wall — made from HBW 400 steel — pendulum-mounted with automatic 2-claw locking system
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
* Four 3 t lashing rings recessed and foldable per side, embedded in the steel floor
----Tarpaulin:
* Roll tarp — agate grey, similar to RAL 7038
* Tarpaulin tensioned using lateral tensioning ratchets and tensioning rubbers at front and rear
----Paintwork:
* Chassis, underrun protection, and drawbar hot-dip galvanized
* Axles, air reservoir, support winch, and flange drawbar eye painted in black
* Superstructure painted in RAL 9010 pure white
Hnodjx Ipbyepfx Aifsk
----Additional Information:
* Reinforced and certified superstructure according to EN 12642 XL including load securing certificate up to 19 t
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images (images may differ from the actual vehicle due to special equipment)
----Delivery time:
* Vehicle available from CW 16/2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
Hedpexf Skpefx Aifsnk
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Ara
Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function
----Brake system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brakes are uncoupled)
Hnedpfx Aijx Ipbmefek
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side
* Enclosed plastic mudguards, front and rear axles
* Enclosed side underrun protection
* Rear bolted underrun protection
* Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear bumper pads
----Electrical / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* 15-pin 24V power plug
* LED lighting system for 12 & 24V
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container deck / tipping bridge:
* External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance
* To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement
* Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation)
* Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded/pushed from the front
* Hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
----Paintwork:
* Rear underrun protection and locking components (without top coat)
* Turntable, air tanks, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* For container transports according to DIN 30722 part 1
* New vehicle without initial registration with manufacturer’s warranty
* Errors and prior sale excepted
* Sample pictures (photos may vary from actual vehicle due to special features)
----Delivery time:
* Available from calendar week 24/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
Hodpfx Ajxf Skvsifonk
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Ara
Durumu: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brake is disengaged)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side
* Closed plastic mudguards, front & rear axle
* Closed side underrun protection
* Rear underrun guard bolted
* Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear impact protection buffers
----Electrics / lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* 15-pin 24V power connector
* LED lighting system for 12 & 24V
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container guidance surface / tipping frame:
* External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment
* To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock
* The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside
* Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded from the front; hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
Hedpfxjx Ipa As Aifenk
----Paintwork:
* Underrun protection and locking components (without top coat)
* Turntable, air reservoir, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* Suitable for container transport according to DIN 30722 Part 1
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
* Sample images (actual vehicle photos may vary due to optional equipment)
----Delivery time:
* Available from CW 24/2026
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 14,4 to, tand - plateau- tieflader, hydr. rampen"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






















































































































































































































































































































































































































































