Kullanılmış Müller-Mitteltal T4 Rm 40,0 Radmulden satın al (5.276)

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders Nledpfx Aex Ipb Hjk Soa * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Contour marking tape on sides and rear, reflective * Folding lid (hot-dip galvanized) for tool box on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electric plug * Four stake pockets on each side (no stakes present), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame; in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear chamfer) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm storage) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable lateral ramp shift * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: Nodpfxsv D Tbke Ak Ssla * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ----Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable; locking measure retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not a DIN standard) at a total external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm — mounted 5 x 3 t UVV-certified lashing rings per side * In the front and rear corners, 1 x 6.3 t lashing ring each (front, directly behind the container locks in the timber floor, rear in the end beam) * Multiple holes in front and rear end beams for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (10 t/pair load capacity), suitable for rubber-tyred and tracked vehicles * Rear-accessed storage compartment under the loading area, integrated into the chassis Nsdov D Tbdepfx Ak Sola ----Paintwork: * Chassis, drawbar, front wall, underrun protection as well as rear supports galvanized * Axles, air tanks, front landing gear, and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 22/2026

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakılmış tandem platform dorse Nsdpfxeymuz Uo Ak Sela ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap taban * Ağır hizmet tipi yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkün %3,99'dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Almanya genelinde teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakımlı tandem platform römork ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap zemin * Ağır yük bağlama rayları * 2 dingilli tandem * Geniş lastikler Nledpfxsymuz Is Ak Ssa * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkündür %3,99’dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayıp, taahhüt edilen özellikler değildir. Satıcı yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Tüm Almanya’ya teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi-Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 01/2027, yükleme alanı genişliği: 2.500 mm, ? Hidrolik rampalar ? Genişletilebilir ? Her iki tarafta 8 adet yük bağlama halkası ? Stepne tutucu Njdpfxoytz Hws Ak Sola ? Yükleme yüksekliği: yaklaşık 930 mm ? Kampanalı fren ? Duomatic bağlantı ? Yaprak yaylı süspansiyon ? Çift tekerlekli lastik Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır.

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer Ref. for inquiries: 27963, available end of March 2026 NEW VEHICLE including COC * GVW: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports * Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm * Platform height approx. 910 mm loaded / approx. 940 mm unloaded * Load area: 7,000 mm with 400 mm high front wall * Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating, Nedpfx Aoyuq R Uek Ssla * Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation * Load securing package (La-Si-Paket): * 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members * 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame * 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN * Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Softwood (spruce/fir) floor, 50 mm thick * Gigant axles with air suspension including EBS 2S/2M * Lifting and lowering function * 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors * 1 plastic toolbox positioned in driving direction right, in front of the front wall * LED lighting system * 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize load warning sign * 1 removable all-round LED beacon including holder and installation * Rear folding supports, front support foot with gear winch ---- Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value Other terms with/without down payment or residual value are possible! We are an authorized MüllerMitteltal dealer ---- * Our opening hours: * Mon-Thu: 08:00-17:00 * Fri: 08:00-15:00 * Outside these hours, we are available by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with indication in the truck via EBS signal – without installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar adjustable in height by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the front right side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking positions and two pieces on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced "Strong" drop sides (continuous side walls on top with internal pipe reinforcement – without center stanchions – foldable with drop side spring lift) * Rear stanchions bolted * Combination steel wing doors at the rear, 2-leaf asymmetrically split, can swivel and be locked at 270°, non-foldable, and with an additional pendulum frame for automatic rear door opening during tipping operation, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic rear door function when tipping rearwards with opened wing door * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings recessed into the external frame * 4 mm plate floor made of fine-grain steel * Rear acceptance rail for the ramps * Body reinforced with cargo securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tired and tracked vehicles Nodpfex Hm Rcsx Ak Ssla * Rear lockable storage compartment recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tires: 358/55 R 19.5 * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the right front side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection Nodpfx Akox Hm Rie Sola * Plastic quarter mudguards * Lashing hooks at each central locking bearing and two at the front wall * Chassis made of fine-grained steel * 3-way tipper body made of steel with reinforced Strong sideboards (continuous side walls at the top with inside pipe reinforcement – without center stanchions – drop-down with sideboard spring lift) * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – can be swung and locked up to 270° (not drop-down), plus additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate function when tipping in reverse with open wing door * Each corner fitted with 1 x 5 t lashing point; each side with 4 x 3 t lashing rings recessed into the outer frame * 4 mm floor plate made of high-tensile fine-grained steel * Rear mounting rail for drive-on ramps * Reinforced body with load securing certificate * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps integrated below the loading platform in the chassis (accessible from rear) * Drawbar, underrun protection, rear stanchions, and rear fold-down supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork available in a custom RAL color for an additional charge * Errors and prior sale excepted * Available for immediate delivery from week 10/2026 * Sample images

Koşul: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS * 5 odacıklı arka stop lambaları * Yüksekliği ayarlanabilir çekici tertibatı * Gigant akslar * Ön destek makarası Nljdpfx Aoyncyhsk Soa ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton Boş ağırlık: 6.530 kg Yük kapasitesi: 25.470 kg Nledpfx Akjx Utq So Sea Azami toplam ağırlık (zGG): 32.000 kg

Koşul: ikinci el, boş ağırlık: 3.280 kg, azami yük ağırlığı: 14.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2013, süspansiyon: hava, lastik boyutu: 265/70 R19,5, dingil mesafesi: 5.030 mm, Donanım: ABS, | Müller-Mitteltal roll-off trailer | Toolbox | Galvanized | Tires: 265/70R19.5 | BPW disc brakes | TÜV valid until | Subject to errors, input mistakes, and prior sale. Nsdpfxewd Sdco Ak Sela

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty Nledpfex Ipapox Ak Sea ----Delivery Time: Vehicle available immediately

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: Nsdpfx Aox Ipbask Ssla * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem • Lowloader • Platform Trailer Immediate availability No. for inquiries: 11611 Delivery possible free to your address * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, dual wheels 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized headboard 400mm Nsdpfoyndh Hox Ak Sola * Excavator bucket platform made from hardwood, bolted to the headboard * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifters with upright, adjustable springs for single-person operation * 4 UVV drop lashing rings (LC 6300daN) * Perforated outer frame (45°-folded with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm; fitting drop lashing rings LC 3000 daN at approx. 600 mm possible) with tight cross-members, high-profile head and tail sections, and rear entry slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN flush-mounted in the existing hole matrix in the outer frame, additionally * Additional lashing options through holes (Ø 50 mm, LC 1200 daN) in the head and end beams * Toolbox in front of the headboard * Side marker lights with indicator pulse * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable landing gear at front, folding supports at rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable; optionally with 50 mm eye available * 1 removable LED warning light at the rear---- * Leasing, hire purchase, financing, part exchange possible * e.g. 510 euros for 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 Outside business hours by appointment We speak German, English, Polish, French Leasing, financing, part exchange available

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Njdpfx Ajq Dyvyjk Ssla * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and use as low loader ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-type cylinders * Drum brakes ----Axles: * 2 × 10.5 t axles ----Suspension: * Air suspension with manual lowering at rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), indication in the truck via EBS signal (without truck-side installation) * LED tail lights 12/24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier in basket design on the right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact buffers * Folding A-plate at rear ----Loading area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * Transport of roll-off containers with container length from 5,500 mm to 7,000 mm possible * Pneumatic 4-way clamp locking and mechanical plug-in stop angles at the front of the guide rails * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 relocatable skip stops for lateral centring, front 4 skip stops are plugged in with tiltable stops * Weld bead as anti-slip coating in the drive-on ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and non-positive securing of skips; 4 cloverleaf-style lashing cleats on each side * 1 pair of 13.4 t UVV lashing rings at the front Nedpfx Ael Tld Iek Sola * Each side fitted with 4 × 8 t lashing loops recessed in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair), 2,800 × 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Notes: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Perm. total weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer’s warranty * Errors and intermediate sale excepted ----Delivery time: * Immediately available from Egstorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 – for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length, with 40 mm towing eye and height adjustment mechanism Nlsdpfol Tnwzox Ak Sea ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), can be displayed in the truck via EBS signal (no need for truck-side installation) * LED tail lights 12 / 24 V * 15-pin power connector ----General equipment: * Tool box made of powder-coated sheet steel * Spare wheel holder in cage design on right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable stop angles at the front of the track * Can transport up to 2 skip containers with a maximum volume of 10 m³ * Includes 8 repositionable skip stops for lateral centering, front 4 are pinned with pivoting stop * Weld bead as anti-slip surface in the inclined ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips, 4 lashing cleats in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t lashing eyes per side recessed into the outer frame ----Ramps: * Aluminum drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Painting: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible total weight of 20,000 kg technically possible-- * New vehicle without initial registration, comes with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egstorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: * 3-in-1 – suitable for hooklift, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required) * LED tail lights 12/24 V * 15-pin electrical connector ----General Attachments: * Tool box made of powder-coated steel plate * Spare wheel carrier in basket design on right-hand side * Enclosed side underrun protection * Quarter mudguards with splash guards made of plastic * Plastic rear impact protection buffers Nodpfx Aswb Raksk Sela * Folding A-board at rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm * Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails * Transport of up to 2 skip containers with max. 10 m³ possible * Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable. * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop-down supports ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets * 1 pair of 13.4-ton UVV lashing rings facing towards the front * Four 8-ton lashing eyes per side integrated into the outer frame ----Ramps: * Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Painting: * Reflective contour tape, sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension Nljdpjpk Dv Rjfx Ak Sea ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: Nsdeykx I Hopfx Ak Sjla * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting Nlsdpfxeykx I To Ak Soa * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low-loader | Flatbed | Trailer Available immediately | Request number: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer Technical Specifications: * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) Nljdpfx Aoyadz Rok Sea * 6.27 m x 2.47 m flatbed with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to front wall * Platform height unladen 930 mm / laden 870 mm * Single-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured with holding rods and diagonal supports * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * 4 drop-forged lashing eyes (UVV, LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum spacing of 480 mm). Installation of drop-forged lashing eyes LC 3000 daN at approx. 600 mm spacing possible. Closely spaced transverse profiling, high-profiled front and rear closure, rear access ramp, hot-dip galvanized. * 10 recessed UVV lashing eyes LC 3000 daN in pre-existing hole pattern in outer frame, additional options * Further lashing options via holes (Ø 50 mm, LC 1200 daN) in front and rear beam * Toolbox positioned in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 recessed container locks in front cross member * Height-adjustable support jack at the front, foldable supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable; 50 mm towing eye available on request * 1 removable LED marker light at rear ---- Leasing, hire purchase, financing, and trade-in available E.g. 515 euros for 60 months term without down payment or final residual value ---- Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, we are available by appointment We speak German, English, Polish, and French Leasing, financing, and trade-in possible

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t Nodpfoq Dyv Iox Ak Sela * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm Nljdpfxstplwio Ak Soa * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images