Kullanılmış Müller-Mitteltal Silo Yapısı satın al (260)

Durumu: kullanılmış, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2017, Müller Mitteltal 3-Axle Lowbed Trailer with Ramps Type T3 Profi Gross Weight: 24,000 / 30,000 kg Payload: 17,940 / 23,940 kg Unladen Weight: 6,060 kg Overall Length: 10,800 mm Loading Length: 8,300 mm / Load Bed: 6,500 mm Loading Height: 900 mm Parabolic Suspension Extensions with Warning Panels Dkjdpfx Agjv Hl Rie Teg Large Lashing Package Long Ramps with Spring Support Toolbox Storage Compartment in the Neck Vehicle is available immediately. Additional new and used 3- and 4-axle lowbed trailers available from stock. For further information, please contact:

Durumu: kullanılmış, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2018, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 490 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.550 mm, Müller Mitteltal KA-TA-R 11.9t * Tandem three-way tipper * Tipper trailer * Truck trailer * One owner * First registration: 25.10.2018 * Next inspection (TÜV): 12/2026 * Gross vehicle weight: 11,900 kg * Unladen weight: 3,060 kg * Payload: 8,840 kg * Overall dimensions: 7,150 mm x 2,550 mm x 1,550 mm * Internal dimensions: 5,000 mm x 2,400 mm x 490 mm * Continuously adjustable drawbar eye height * All supply lines to the towing vehicle protected inside a hot-dip galvanized drawbar * Chassis hot-dip galvanized * Drop sides laser welded from fine-grain steel * Fixed front wall made of smooth sheet * Upper side walls with internal tube reinforcement and spring-assisted * Side and rear walls pendulum, foldable and removable (central locking) * Brake system according to EC Directive 71/320/EEC ff., with ABS 2S/2M and spring-actuated parking brake * Leaf suspension * Stake pocket * Hydraulic three-way tipping system * Recessed lashing points in platform floor * Supports * Support leg * Tires: 235/75R17.5 143 J * Sidewall spring ATTENTION! PLEASE READ! We expressly reserve the right for prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspecting the trailer so the buyer can be fully informed about its condition and suitability. Viewings and inspections are possible and expressly encouraged at any time by appointment! Images similar; equipment may include optional extras available at additional cost. Specified internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Dkjdpfjx Ibl Dex Ag Teg Tel.: Fax:

Durumu: yeni, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit Dodpfx Agol Th Eys Tekg ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2001, toplam uzunluk: 10.000 mm, toplam genişlik: 2.510 mm, süspansiyon: çelik, Üretim yılı: 2001, Ek bilgi: Marka: MÜLLER MITTELTAL Model: T 3 Yapı: platform (platform U=8400 / G=2510 / Y=940 mm) Yıl: 09.2001 Süspansiyon: çelik Frenler: kampana Boyutlar: U/G: 10.000 mm / 2.510 mm Ağırlıklar: tam/boş: 24.000 kg / 6.100 kg = Daha fazla bilgi = Dodpfx Asuwvbqog Tskg Süspansiyon: yaprak süspansiyon Boş ağırlık: 6.100 kg Taşıma kapasitesi: 17.900 kg Azami yüklü ağırlık (GVW): 24.000 kg Daha fazla bilgi için lütfen Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche veya Deniss Urmaker ile iletişime geçiniz.

Durumu: kullanılmış, ilk tescil: 06/2010, yükleme alanı uzunluğu: 11.350 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, - Yönlendirilmiş aks - Uzaktan kumanda - Hidrolik rampalar - Üst yükleme yüzeyi 3500 mm Dksdpfx Aex Dzn Ujg Teg - Alt yükleme yüzeyi 7850 mm

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Dodpsxt Rw Rofx Ag Tskg Daha fazla bilgi için lütfen bizimle iletişime geçin.

Durumu: yeni, azami yük ağırlığı: 24.020 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) Dkedpfsl Th I Asx Ag Tjg * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1992, Üretim yılı: 1992, Donanım: ABS, Müller-Mitteltal Abrollanhänger Alman aracı Dkodpfx Agext Sd Sj Tjg = Daha fazla bilgi = Boş ağırlık: 3.140 kg Taşıma kapasitesi: 14.860 kg Azami yüklü ağırlık: 18.000 kg Satış fiyatı: € 1.500, US$ 1.745

Durumu: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lift and lower system plus RtR valve * Start-assist for shunting, engaged on the first axle via EBS (no truck-side installation required) * Smart-Board infotool mounted on the trailer with pressure sensors for total axle load display * Rear axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting, activated from the cab via EBS (no truck-side installation required) * 2nd king pin position 2 * Side underrun protection, support legs at the front, and swing-down supports at the rear of the chassis * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with indicator actuation * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages at front and rear * Straight steel mudguards * Spare wheel holder in front of the bulkhead (without spare wheel) * Gooseneck platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high, foldable and removable aluminum sideboards on the gooseneck platform (in RAL color of choice) * Rear wall insertable, 150 mm high * Sloped rear section of the gooseneck platform to the lowbed, approx. 700 mm long with checker plate, with a perforated strip at the end for attaching aluminum loading ramps * Gooseneck platform with 50 mm clamped wooden floorboards, lowbed platform with 60 mm clamped wooden floorboards * Tread plate over the axles * 9x mechanical folding extensions to 3 m total width (not on rear slope; extension boards available with lockable crosswise storage compartment under the load deck) * 3 storage recesses under the gooseneck platform for optional storage of aluminum loading ramps or wooden boards for wheel well covering * Swivel arm as carrier for connection lines from truck to trailer Dkedeq Euakopfx Ag Tog * Load securing package (LaSi): gooseneck platform with perforated outer frame, 45° bent with hole pattern for lashing equipment (2 t lashing capacity per point, min. 480 mm apart) * 3 x 13.4 t recessed lashing rings per side in the floor (1x on gooseneck, 1x on longitudinal beams after step, 1x above center axle beside longitudinal beam) * 3 x 13.4 t lashing rings per side on outer frame (1x start of gooseneck step, 1x start of rear slope, 1x end of rear slope) * 2 x 10 t lashing rings per side (1x between front wheel well and 1st axle, 1x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to outer frames of wheel wells (2 at front well, 1 at rear well) * Extended excavator arm trough from end of last fixed axle over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. B = 770 mm x D rear = 270 mm / D front = 170 mm, 2 x 6.4 t lashing rings per side inside trough * 2 wheel wells per side, 390 mm deep and 640 mm wide for transport of wheel loaders with wheelbases of 3,000-3,590 mm and tire diameter of 1,760 mm, with sliding covers

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front: closed plastic mudguards; Rear: straight, galvanized steel fenders each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for total width of 3 m (not at rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator trough) * Hydraulically operated one-piece ramps (approx. 3,000 x 720 mm) * Mechanical side-shifting of ramps * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (includes 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires Djdpjl Thxdofx Ag Tekg * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 09/2026

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing aggregate Dodpfx Asxglibog Tokg * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox mounted front right outside on bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and access ramps * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring lifter * Steel rear wall, retractable between the ramps, storage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, angled by approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing rings every 600 mm possible; in each corner front and rear one 6.3 t lashing ring; various boreholes in front and end crossbar for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach slope at rear approx. 860 mm * -- Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate -- * Side wall color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 08/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * Load securing package (LASI package) * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 2 x 12-ton Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel, mounted right side * Reflective contour tape on sides and rear Dksdsl Thwcjpfx Ag Teg * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized steel sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact bumpers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame section (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in bogie area * Suitable for roll-off container transport, container length 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pivoting stops * 3 pairs of 10-ton UVV lashing rings on sides for connecting tensioning elements for positive and friction-locked load securing, 4 lashing brackets in cloverleaf design (side), 1 pair of 13.4-ton UVV lashing rings at front, load securing certificate to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in ramp run area * Mechanical drop supports at rear * 1 pair aluminum drive-on ramps (10.6 tons/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment, accessible from the rear) * 235/75 R 17.5 twin tires * 4,360 kg unladen weight * Permissible total weight technically up to 20,000 kg * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * Load securing package (LASI package) * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 2 x 12 t Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment * Toolbox made of powder-coated sheet steel, right side * Side and rear contour tape, reflective * Side underrun protection * Plastic quarter mudguards with spray protection Djdsl Thv Ropfx Ag Tskg * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Sheet steel floor with roller recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point twist lock system and mechanical insertable front stop blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and frictional load securing, 4 cloverleaf-type lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front, load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in the ramp area of the traversing slope * Mechanical drop supports at the rear * 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) * 235/75 R 17.5 twin tires * 4,360 kg unladen weight * Permissible gross weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durumu: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lift and lowering device plus RtR valve * Start assist for shunting purposes activated on the first axle via EBS (no truck-side installation required) * Smart-Board installed as an infotool on the trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering purposes via EBS (no truck-side installation required) * 2nd kingpin position * Side underrun protection, landing gears at the front and swing-down supports at the rear of the chassis * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights Dkedetpta Dopfx Ag Teg * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign sets front and rear * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Fifth-wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * On the side of the fifth-wheel platform: 400 mm aluminum side walls (RAL color of your choice), foldable and removable * Rear wall – 150 mm – slotted in * Rear slope at the fifth-wheel platform to low-bed approx. 700 mm long with checkered plate covering and at the end a perforated strip for hanging aluminum loading ramps * Fifth-wheel platform with 50 mm clamped wooden planks and low-bed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 meters total width, but not in the rear slope (extension planks available with lockable storage compartment crosswise under the loading area) * 3 mounting shafts under the fifth-wheel platform for storing alternative aluminum loading ramps or wooden planks for wheel recess covers * Pivoting arm as carrier for connection lines from truck to semi-trailer * Load securing package consists of: perforated outer frame on fifth-wheel platform, 45° edged with hole pattern for lashing devices (2 t lashing capacity per lashing point at minimum 480 mm intervals) * On each side, 3 x 13.4 t recessed lashing rings in the floor (1 on the fifth-wheel platform, 1 on the main beams after the step, and 1 above the middle axle next to the main beam) * On each side, 3 x 13.4 t lashing rings on outer frame (1 at start of step on fifth-wheel platform, 1 at start of approach ramp, 1 at end of approach ramp) * On each side, 2 x 10 t lashing rings (1 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * On each side, 3 x 5 t lashing rings bolted to the outer frame of wheel recesses (2 at the front and 1 at the rear wheel recess) * Extended excavator stick trough from end of last rigid axle through to end cross-member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm, on each side 2 x 6.4 t lashing rings in the stick trough * On each side, 2 wheel recesses 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm and tire diameter of 1,760 mm, with retractable covers.

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-actuated cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating aggregate * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right exterior, mounted on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Pre-installed fittings in front of the front wall for subsequent installation of container locks Dsdpfx Asxglh Rjg Tjkg * Bolted front wall made of smooth sheet metal * Side walls made of steel sheet, trapezoidal profile, foldable with drop-side spring assist * Steel rear wall, insertable between the ramps—holder for non-use inside in front of the front wall * Bolted rear stanchions * Perforated outer frame, approx. 45-degree edged, with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings every 600 mm possible, one 6.3 t lashing ring each in the front and rear corners, various holes in the front and rear crossmembers for 1.2 t lashing points * One-piece mechanical grating ramps with spring-assisted operation for single-person use, approx. 2,750 x 600 mm (can be telescoped to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Drop-side color in RAL 2011 deep orange * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 08/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with indication in the truck via EBS signal – without installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar adjustable in height by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the front right side of the chassis * 15-pin electrical connector Dsdpfxex Hm Rcj Ag Tokg * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking positions and two pieces on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced "Strong" drop sides (continuous side walls on top with internal pipe reinforcement – without center stanchions – foldable with drop side spring lift) * Rear stanchions bolted * Combination steel wing doors at the rear, 2-leaf asymmetrically split, can swivel and be locked at 270°, non-foldable, and with an additional pendulum frame for automatic rear door opening during tipping operation, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic rear door function when tipping rearwards with opened wing door * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings recessed into the external frame * 4 mm plate floor made of fine-grain steel * Rear acceptance rail for the ramps * Body reinforced with cargo securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tires: 358/55 R 19.5 * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the right front side of the chassis * 15-pin power connector Dksdpfxjx Hm Rio Ag Tsg * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at each central locking bearing and two at the front wall * Chassis made of fine-grained steel * 3-way tipper body made of steel with reinforced Strong sideboards (continuous side walls at the top with inside pipe reinforcement – without center stanchions – drop-down with sideboard spring lift) * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – can be swung and locked up to 270° (not drop-down), plus additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate function when tipping in reverse with open wing door * Each corner fitted with 1 x 5 t lashing point; each side with 4 x 3 t lashing rings recessed into the outer frame * 4 mm floor plate made of high-tensile fine-grained steel * Rear mounting rail for drive-on ramps * Reinforced body with load securing certificate * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps integrated below the loading platform in the chassis (accessible from rear) * Drawbar, underrun protection, rear stanchions, and rear fold-down supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork available in a custom RAL color for an additional charge * Errors and prior sale excepted * Available for immediate delivery from week 10/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2025, * EK 9.6 ----Braking System: Dkodpfsw Ndr Usx Ag Teg * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Towing Eye: * Drawbar as central beam with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lift mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal – no installation required on truck side * 15-pin power connector * LED rear lights * Flashing side marker lights ----General Attachments: * Front landing gear * Closed plastic mudguards * Folding underrun protection for pavers ----Chassis: * Chassis made from high-tensile fine-grain steel ----Tipper Body: * Pallet-compatible 3-way tipper body * 700 mm steel front wall * Continuous asymmetric aluminium side walls – foldable without central stanchion, with long-travel locks and pivoting via manual central locking * 800 mm high steel tailgate with automatic opening during rear tipping * 4 mm Hardox 450 steel floor ----Load Securing: * 2 pairs of 3 t lashing rings on each side, recessed and folding in the steel floor ----Paintwork: * Chassis, drawbar, underrun protection hot-dip galvanized * Tipper body painted RAL 9010 pure white ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles Djdpfx Agjl Th Ads Tokg * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel fender skirts, each with spray protection * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power socket * Four stake pockets on each side (stakes not included), each also with lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame—13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical folding outriggers for a total width of 3 meters (not in the rear taper) * Widening boards stored in the middle of the loading area * Backhoe stick support over the rear axle up to the end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings in the side backhoe stick support) * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 09/2026

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with balancing unit * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized drop-down supports at the rear * Plastic toolbox at the front right outside on the front panel * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Mounting fixture ahead of the front wall for retrofitting container locks * Bolted front bulkhead made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assistance * Rear steel wall slidable between the ramps, with internal bracket for storage when not in use * Bolted rear stanchions Dkodporvvfljfx Ag Tjg * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing rings every 600 mm possible; in each front and rear corner one 6.3 t lashing ring; various holes for 1.2 t lashing options in front and end crossmembers * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm width) * Rear access angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white * Side wall painting in a RAL color of choice available at extra charge * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 08/2026

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with equalizer unit * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside the bulkhead * Side underrun protection * Plastic quarter mudguards Dkjdpfx Aeq Dyvveg Teg * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and ramps * 50 mm softwood flooring * Mounting preparation in front of the front wall for subsequent installation of container locks * Bolted smooth sheet steel front wall * Side panels made of trapezoidal-profiled sheet steel, foldable with drop side spring lifts * Steel rear wall insertable between the ramps – holder for storage inside in front of the bulkhead when not in use * Bolted tailgate stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t recessed lashing rings every 600 mm; in the corners front and rear, 1 x 6.3 t lashing ring each; various holes for 1.2 t lashing capability in the front and rear end cross members * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach ramp at rear approx. 860 mm * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * Sidewall color RAL 9010 pure white * Painting of side panels in any RAL color available at extra charge * New vehicle with manufacturer’s warranty * Errors and interim sale excepted * Available from calendar week 08/2026

Durumu: yeni, azami yük ağırlığı: 24.020 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles Dkjdpel Th Nnjfx Ag Tog * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Durumu: yeni, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: Dsdpfx Agsl Th Dms Tskg ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Durumu: yeni, azami yük ağırlığı: 14.680 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Disc brakes * 2 x 10 ton BPW wide track axles * Air suspension (automatic lowering when disconnecting the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 450 x 470 mm, mounted right side * Side stowage box 1,000 x 500 x 500 mm * Enclosed plastic mudguards, front and rear axles * Closed side underrun protection, usable as advertising space * Rear underrun protection * Plastic rear bumper buffers * ADR hazard sign at the rear * 15-pin electrical connector * LED tail lamps * Conveyor track length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable stop angles (2 positions) at front left and right on the running rails Dodpfjv Nulzsx Ag Tekg * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg * -- Technically permitted gross weight up to 20,000 kg -- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, slewing ring, and drawbar * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 09/2026

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front: closed plastic mudguards; Rear: straight, galvanized steel fenders each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for total width of 3 m (not at rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator trough) * Hydraulically operated one-piece ramps (approx. 3,000 x 720 mm) * Mechanical side-shifting of ramps * Loading area above turntable: approx. 1,960 x 2,520 mm Dksdpfxol Thxao Ag Teg * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (includes 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 09/2026