Alçak şasi dorse

GOLDHOFER STZ-L5-50/80A Tieflader 24m Zwangsgelenkt

Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included Bdedek Af Svopfx Amfod - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durum: mükemmel (kullanılmış), kilometre: 367.000 km, güç: 463 kW (629,50 bg), yakıt türü: dizel, lastik boyutu: 385/65 R 22.5, dingil konfigürasyonu: 8x4, dingil mesafesi: 4.000 mm, yakıt: dizel, yakıt deposu kapasitesi: 900 l, frenler: retarder, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 8.000 kg, izin verilen aks yükü (aks 3): 13.000 kg, Üretim yılı: 2015, Donanım: AdBlue, retarder, Color: White Manufacturer: Mercedes-Benz Model: 4163 SLT 8x4 Chassis Number: WDB9634261L922193 Year of Manufacture: 2015 Mileage: 367,000 km Engine: OM473 inline 6-cylinder, 15.6 L, 460 kW (625 hp), 3,000 Nm, Euro 6 compliant Transmission: Mercedes Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch Front axle: 9,000 kg | Leaf spring suspension | 385/65 R 22.5 Second axle: 8,000 kg | Air suspension | 385/65 R 22.5 Third axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction Fourth axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction GVW: 41,000 kg GCW: 250,000 kg / Up to 500 tons with ballast box (not included) Equipment - 900L fuel tanks - 60L AdBlue tank - 24V electrical system - JOST 3.5" sliding fifth wheel - Rockinger RO*56E coupling (new) - Gigaspace cab - Side skirts - Work lights - Toolboxes - Bull bar with lights - Wheelbase: 4,000 mm - Axle ratio: I = 5.333 Cabin - Sleeper cab - Multifunction steering wheel - Cruise control - Sun visor - 2 beds - Air conditioning - TV - Leather interior - Comfort leather seats - Coffee maker - Fridge drawer - Storage compartments - Radio / CD player / Bluetooth = Further Information = General Information Year of manufacture: 2015 Transmission Type: Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch, automatic Axle Configuration Front axle: Tire size: 385/65 R 22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf spring Middle axle: Tire size: 385/65 R 22.5; Max. axle load: 8,000 kg; Steering; Suspension: air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin wheels; Max. axle load: 13,000 kg; Hub reduction: planetary axles; Suspension: air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin wheels; Max. axle load: 13,000 kg; Hub reduction: planetary axles; Suspension: air suspension Weights Payload: 500,000 kg Gross Vehicle Weight (GVW): 41,000 kg Functional Body manufacturer: Mercedes Bsdpfeuu E T Aox Amfodd Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform Bedpoi Ai E Rsfx Amfjdd - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durum: mükemmel (kullanılmış), kilometre: 279.179 km, ilk tescil: 02/2009, yakıt türü: dizel, dingil konfigürasyonu: 8x6, dingil mesafesi: 4.200 mm, yakıt: dizel, yakıt deposu kapasitesi: 1.000 l, frenler: retarder, renk: beyaz, şoför kabini: yataklı kabin, vites türü: mekanik, emisyon sınıfı: Euro 5, Üretim yılı: 2009, Donanım: ABS, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, is filtrasyon filtresi, klima, merkezi kilitleme, retarder, sisal lambaları, spoiler, tır çekici bağlantısı, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Roof spoiler - Low noise emissions - Speed limiter - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Tow hitch = Further Information = Technical Information Bdedsuxutnjpfx Amfed Number of cylinders: 8 Engine displacement: 15,928 cc Unladen weight: 15,000 kg Axle Configuration Front axle: Steerable Rear axle 1: Steerable Rear axle 2: Twin tyres Rear axle 3: Twin tyres Condition Technical condition: very good Optical condition: very good Financial Information Price: On request MERCEDES-BENZ ACTROS 4360 V8 SLT 8X6 TITAN HEAVY DUTY TRACTOR PUSH AND PULL POWER 250 TON EURO 5 L PACKAGE (CAN BE CONVERTED TO EURO 3 FOR EXPORT) V8 ENGINE 600 HP DRIVE 8X6 WHEELBASE 420 CM DIFFERENTIAL LOCKS FIFTH WHEEL + TRAILER COUPLING HYDRAULICS FOR LOW-LOADER LARGE 1000-LITRE FUEL TANK BEHIND THE CAB TRANSMISSION WSK 440 RETARDER PUSH AND PULL CAPACITY 250 TONNES!!! FRONT PUSH BUMPER EXTRA COOLING PACKAGE FRONT AND REAR OIL AND AIR VALVES TOOLBOXES CAB WITH ALL OPTIONS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2006, toplam genişlik: 2.850 mm, süspansiyon: diğer, lastik boyutu: 285/70R19.5, renk: siyah, Üretim yılı: 2006, Donanım: ABS, = Additional Options and Accessories = - Central lubrication = Remarks = Faymonville Jeep Dolly D3 Year: 10-2006 • 1 x lift axle • 1 x friction-steered axle / trailing steering • Air suspension • Max. technical weight: 56,000 kg Faymonville STBZ-5VA Year: 10-2006 • Pendle axle • Removable gooseneck • Movable table • Extendable bed: 400 cm • Load bed: 650 + 400 cm Bdedpfxjxbng Ej Amfod • 50,000 kg gooseneck load • Max. technical weight: 119,680 kg = Further Information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tires; Tire tread left inside: 15%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Suspension: Air suspension Front axle 2: Twin tires; Tire tread left inside: 30%; Tire tread left outside: 30%; Tire tread right inside: 40%; Tire tread right outside: 60%; Suspension: Air suspension Front axle 3: Twin tires; Steering; Tire tread left inside: 30%; Tire tread left outside: 70%; Tire tread right inside: 60%; Tire tread right outside: 70%; Suspension: Air suspension Rear axle 1: Twin tires; Steering; Tire tread left inside: 30%; Tire tread left outside: 60%; Tire tread right inside: 40%; Tire tread right outside: 70%; Suspension: Hydraulic suspension Rear axle 2: Twin tires; Steering; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 30%; Tire tread right outside: 75%; Suspension: Hydraulic suspension Rear axle 3: Twin tires; Steering; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Suspension: Hydraulic suspension Rear axle 4: Twin tires; Steering; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 40%; Tire tread right outside: 50%; Suspension: Hydraulic suspension Rear axle 5: Twin tires; Steering; Tire tread left inside: 70%; Tire tread left outside: 70%; Tire tread right inside: 20%; Tire tread right outside: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide correct information, but no rights can be derived from the listed texts.

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 11.200 kg, izin verilen dingil yükü (dingil 2): 11.200 kg, izin verilen aks yükü (aks 3): 11.200 kg, yükleme alanı uzunluğu: 14.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, toplam uzunluk: 14.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 245 / 70 R17.5, renk: mavi, Üretim yılı: 2008, Donanım: hidrolik arka platform, Color: Blue Payload capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights / Payload King-pin load: 26,000 kg Axle load: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload capacity: 72,600 kg Axles Axle manufacturer: BPW Air suspension 1st axle fixed Axles 2–6 with hydraulic steering Axles 1 & 2 liftable Bodox R Undjpfx Amfedd High/low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Max. extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm – 925 mm King-pin height: approx. 1,350 mm Additional equipment • PTO operated by truck • Lashing rings • Stake pockets • Partial wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king-pin • Central greasing system • Oversized load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle configuration Tyre size: 245 / 70 R17.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 11,200 kg Rear axle 2: Twin tyres; lift axle; Max. axle load: 11,200 kg; Steering Rear axle 3: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 4: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 5: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 6: Twin tyres; Max. axle load: 11,200 kg; Steering Weights Unladen weight: 20,600 kg Payload: 72,600 kg Total weight: 93,200 kg Functional Body manufacturer: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request

Durum: yeni, boş ağırlık: 10.000 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 51.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Cargo area: - Gooseneck, length approx. 4,100 mm with central beam - Cargo area in extendable design, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps Bdodpfxoiuy Nle Amfjd - Pneumatic locking with conical locking pins and reinforced locking positions - Supply lines are protected within the extendable beams and automatically adapt to the respective cargo area length Axles, suspension, and tires: - BPW axles and suspension, all axles hydro-mechanically forcibly steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tires: 235/75 R17.5 twin tires Paintwork: - 6-coat final treatment - Entire steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paint with two coats of 2-component acrylic paint, single color in MB 7350 Novagrau, then hollow sections sealed with special wax Steel construction: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - MAG welding process according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket on the front connection bar - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets recessed in the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 cross stake pocket bar mounted in the gooseneck cargo floor for stakes approx. 100x50 mm (1x at the rear of the gooseneck) - 2" kingpin - Mechanical landing legs with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Approx. 32 mm wooden floor encased in aluminum omega profiles on the gooseneck and cargo area - One locking position per extension, approx. every 500 mm - 10 pairs of recessed horizontal lashing rings in the outer frame of the cargo area, foldable outward - 6 pairs of stake pockets recessed in the outer frame of the cargo area for stakes approx. 100x50 mm - 2 cross stake pocket bars installed in the cargo floor of the cargo area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Rear cross member with a bevel approx. 350 mm at 10° - Integrated mounting rail for loose aluminum loading ramps at the rear cross member - 1 pair of drop-leg supports at the rear cross member - Fenders on all axles - Central lubrication system with 1 pump - Remote axle steering operated from front and rear via cable remote control with pushbuttons and single-track monitoring of the axles - Under the gooseneck and on the left and right at the rear cross member, one 7-pin socket each for warning boards - One 7-pin socket at the rear cross member - Container locks "TWIST-LOCKS" in the cargo area for transporting 2x 20ft and 1x 40ft containers - Radio remote control for axle steering in addition to cable remote control, with 2 indicator lights at the receiver for single-track monitoring - 2 axle load gauges + axle load chart - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminum 15%) by hot finis

Durum: mükemmel (kullanılmış), ilk tescil: 08/2008, renk: yeşil, Üretim yılı: 2008, Çekilebilir üst yapı: Evet Teknik durumu: çok iyi Bedpfxoykz Uie Amfodd Optik durumu: çok iyi

Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: Bodpfow Tgp Dex Amfjdd * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle

Durum: işlem için hazır (kullanılmış), makine/araç numarası: YAFTL40900001004, azami yük ağırlığı: 80.000 kg, toplam ağırlık: 105.000 kg, lastik boyutu: 70%, dingil mesafesi: 1.360 mm, renk: kırmızı, Üretim yılı: 2009, Donanım: ABS, Country of manufacture: Netherlands Bsdpfevtygfsx Amfjdd Body options: Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening Additional information: Low-bed pipe carrier trailer, extendable, hydraulic suspension, laterally extendable up to 3500 mm internal and 4200 mm external width, latest generation pendulum axles. Option to add a 2-axle dolly for a 2+4 pipe carrier combination. Load capacity 85 tons. We have 2 identical units available in perfect condition.