Kullanılmış Müller-Mitteltal Kipper satın al (247)

Durumu: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange Mounting Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flanged towing eye ---- Electrics / Lighting: * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via the reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (tire pressure monitoring system) ----General Attachments: * Mechanically adjustable 3-meter warning board sets at front and rear * Support winch at the front * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on the left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood flooring Ksdpfx Aev D Tbkod Uelp * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this is not DIN compliant) with a total outside width of 3,000 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Mounting of 3 t folding lashing brackets every 600 mm possible - each side equipped with 5 x 3 t UVV lashing brackets * Each front and rear corner with 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor, rear in the end cross member) * Various drill holes in the front and rear cross members for securing options up to 1.2 t ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (carrying capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed under the loading area within the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanised--- * Axles, air tanks, front support winch, and flange towing eye painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from calendar week 09/2026

Durumu: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower system ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (corresponds to B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated by reverse gear) * 1 LED beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * Outward folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outside container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute exterior width of 3,000 mm ----Load Securing: * Perforated external frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-in lashing rings possible every 600 mm - each side fitted with 5 x 3 t UVV-compliant lashing rings * 1 x 6.3 t lashing ring in the corners at the front and rear (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and end cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium insert ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment under the loading platform integrated in the chassis ----Coating / Finish: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front landing leg and flange drawbar eye painted black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted Kedpsv D Tbdofx Ad Ujlp ----Delivery time: * Available from week 09/2026

Durumu: kullanılmış, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 01/2027, yükleme alanı genişliği: 2.500 mm, ? Hidrolik rampalar ? Genişletilebilir ? Her iki tarafta 8 adet yük bağlama halkası ? Stepne tutucu ? Yükleme yüksekliği: yaklaşık 930 mm Klsdjytz Hwopfx Ad Ujp ? Kampanalı fren ? Duomatic bağlantı ? Yaprak yaylı süspansiyon ? Çift tekerlekli lastik Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır.

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2006, toplam uzunluk: 7.900 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22.5, renk: diğer, Üretim yılı: 2006, = Additional Options and Equipment = Superstructure - Year of superstructure: 2006 - Superstructure capacity: 9 m³ (Total capacity of the superstructure.) - Material: Steel Engine - Number of fuel tanks: 1 = Further Information = General Information Color: Violet Usable material: Concrete Axle Configuration Tire size: 385/65R22.5 Axle brand: BPW Eco Plus Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 30%; Tire tread right: 30% Axle 2: Tire tread left: 10%; Tire tread right: 20% Weights Unladen weight: 7,920 kg Payload: 21,080 kg Gross vehicle weight: 29,000 kg = Company Information = Would you like more information about this vehicle? We recommend visiting BAS World. There, you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • Support and services from BAS World Want to find out more? Visit BAS World online! España (ES) We speak 17 languages, so we can always help you in your own language. Please don’t hesitate to contact us directly. Our Spanish-speaking colleague will be happy to assist you! Deutschland (DE) We speak 17 languages to always help you in your own language. Feel free to contact us directly. Our German-speaking colleague will be glad to help you! France (FR) We speak 17 languages, so we can always help you in your own language. Don’t hesitate to contact us directly. Our French-speaking colleague will be happy to assist you! Kedpjycfuksfx Ad Uelp Portugal (PT) We speak 17 languages, so we can always help you in your own language. Don’t hesitate to contact us directly. Our Portuguese-speaking colleague will be happy to assist you! Italia (IT) We speak 17 languages, so we can always help you in your own language. Don’t hesitate to contact us directly. Our Italian-speaking colleague will be happy to assist you!

Durumu: kullanılmış, boş ağırlık: 9.300 kg, azami yük ağırlığı: 14.700 kg, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 10/2024, toplam genişlik: 25.500 mm, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17.5 / 10mm, ön lastik ölçüsü: 235 / 75 R 17.5 / 10mm, işletme ağırlığı: 24.000 kg,

Durumu: kullanılmış, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Kodpfxjymuz Ue Ad Uolp Çok iyi bakılmış tandem platform dorse ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap taban * Ağır hizmet tipi yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkün %3,99'dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Almanya genelinde teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Durumu: kullanılmış, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Klsdpjymuz Iofx Ad Usp Çok iyi bakımlı tandem platform römork ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap zemin * Ağır yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkündür %3,99’dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayıp, taahhüt edilen özellikler değildir. Satıcı yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Tüm Almanya’ya teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi-Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2010, 3 dingilli platform alçak şasi römork. Azami toplam ağırlık 30.000 kg, taşıma kapasitesi 22.800 kg. Yükleme alanı yaklaşık 8.800 x 2.550 mm, fazla genişlik uyarı paketi, tepe lambası, 32 bağlama halkası ve 4 demir cep. İki parçalı hidrolik rampalar yaklaşık 2.150+2.000 x 650 mm, rampa milinde kaydırılabilir. Takım kutuları. Gigant dingil, parabolik süspansiyon, EBS, lastik ölçüsü 235-75R17.5. Yükleme yüksekliği yaklaşık 940 mm. Kıvrımlı çekme kolu, 40 mm çekme halkası, 2 devreli hava (Duomatik), 2 devreli hidrolik, 24 Volt. Kırmızı boyalı. = Diğer Bilgiler = Kjdpeyqm Ihefx Ad Ujlp Lastik ölçüsü: 235-75R17.5 Süspansiyon: Parabolik Süspansiyon Boş ağırlık: 7.200 kg Yük taşıma kapasitesi: 22.800 kg Azami toplam ağırlık: 30.000 kg Üretim ülkesi: DE Daha fazla bilgi için lütfen Jan-Marc Schwickert ile iletişime geçin.

Durumu: yeni, azami yük ağırlığı: 6.110 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2025, * KWH 8.8 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system Kljdpfx Adou I Iqro Usp * Drum brakes * BPW axle * Parabolic suspension * Front landing gear * Rear spring-assisted square tube supports with base plate and safety lock pins for adjustable support heights * Drawbar with 40 mm screw-type towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel fenders with splash protection * Enclosed side underride protection, can be used as advertising space * Plastic toolbox with bottom insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum mount, internal width between drum arms 1,700 mm, with locking clasp at the ends of the support arms to secure the drum, plus a central pawl lock securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable rubber-lined drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, centered and with rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic pump unit with petrol engine including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 6.110 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring system * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square support legs at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screw coupling eye (height adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubing and cross members * Enclosed steel mudguards with splash guards * Enclosed side underrun protection usable as an advertising surface * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivel-mounted cable drum superstructure, clear width between drum arms 1,700 mm with tension latch for securing the drum at the carrier arm ends as well as a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor Kedpou I Iqfjfx Ad Uslp * Valves and adjustable rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise tapered centring cones made of polyamide * Hydraulic pump unit with petrol engine including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Kerb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 10.620 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with indication in the truck via EBS signal – without installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar adjustable in height by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the front right side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking positions and two pieces on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced "Strong" drop sides (continuous side walls on top with internal pipe reinforcement – without center stanchions – foldable with drop side spring lift) * Rear stanchions bolted Kljdpox Hm Rcefx Ad Usp * Combination steel wing doors at the rear, 2-leaf asymmetrically split, can swivel and be locked at 270°, non-foldable, and with an additional pendulum frame for automatic rear door opening during tipping operation, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic rear door function when tipping rearwards with opened wing door * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings recessed into the external frame * 4 mm plate floor made of fine-grain steel * Rear acceptance rail for the ramps * Body reinforced with cargo securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tires: 358/55 R 19.5 * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 10.620 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the right front side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at each central locking bearing and two at the front wall * Chassis made of fine-grained steel Kledpfxex Hm Rie Ad Uep * 3-way tipper body made of steel with reinforced Strong sideboards (continuous side walls at the top with inside pipe reinforcement – without center stanchions – drop-down with sideboard spring lift) * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – can be swung and locked up to 270° (not drop-down), plus additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate function when tipping in reverse with open wing door * Each corner fitted with 1 x 5 t lashing point; each side with 4 x 3 t lashing rings recessed into the outer frame * 4 mm floor plate made of high-tensile fine-grained steel * Rear mounting rail for drive-on ramps * Reinforced body with load securing certificate * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps integrated below the loading platform in the chassis (accessible from rear) * Drawbar, underrun protection, rear stanchions, and rear fold-down supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork available in a custom RAL color for an additional charge * Errors and prior sale excepted * Available for immediate delivery from week 10/2026 * Sample images

Durumu: kullanılmış, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS * 5 odacıklı arka stop lambaları * Yüksekliği ayarlanabilir çekici tertibatı Kodsyncyhepfx Ad Uslp * Gigant akslar * Ön destek makarası ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Durumu: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Platform Bed: * EBS (Electronic Braking System) * Emergency release unit for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (lockable from the tractor unit for shunting purposes—no installation required on the truck—allocated to pin 10 in the 15-pin connector, exclusively for maneuvering, not for public road use) * SmartBoard control box as info tool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, no installation required on the truck side * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate) * Mechanical support winch at the front, mechanical swing supports at the rear of the chassis * Hydraulic flow divider * Continuous side panels (without central stanchion) up to the approach slope * Folding rear stakes * Steel rear wall inserted in front of the rear stakes * Mechanically adjustable warning board package front and rear * Tool box made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED taillights * Removable LED beacon including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood flooring * 400 mm steel front wall plugged in * Perforated outer frame, approx. 45 degrees angled with provision to fit 3 t lashing bracket * In each corner 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings mounted on each side Klodpfx Ajr Dpzxjd Usp * Various holes in front and rear crossmembers for 1.2 t lashing points * Hydraulic one-piece access ramps approx. 3000 x 720 mm, mechanically adjustable sideways * 4-way hydraulic control block for possible retrofit of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, and access ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front support winch painted black * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Subject to error and prior sale * Available from KW 13/2026 * Sample images (vehicle images may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPM Tire Pressure Monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning panel packages front and rear * Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards * Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED rotating beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck) * Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to rear crossmember * Hardwood flooring on running surfaces of the low-bed platform * Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket * Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope) * Plank holders under the loading area, longitudinal alignment * Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp displacement * Hydraulic rear support (single-stage cylinder) Kledpsq Dyvcsfx Ad Usp * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope) * Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension) * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 20/2026

Durumu: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9-ton BPW Eco axles * Air suspension with lifting and lowering system including RTR function * 1st axle liftable * Last axle configured as a trailing steering axle with electro-pneumatic steering lock actuated via reverse gear PIN (locking the trailing axle from the towing vehicle for maneuvering purposes—no installation required on the truck—assigned to PIN 10 in the 15-pin connector; for maneuvering only, not for use on public roads) * SmartBoard control unit serving as an info tool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, requires no installation on the truck side * Fixed center drawbar with 50 mm flange eye (loaded height 900 mm, height adjustment possible at front plate) * Mechanical support winch at the front, mechanical swing-down supports at the rear on chassis * Mechanically adjustable warning sign package front and rear * Toolboxes made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm, mounted right side * Hydraulic flow divider * Continuous sidewalls (without center stanchion) running to the drive-on slope * Fold-down rear stanchions * Steel rear wall inserted in front of rear stanchions * 15-pin power connector * LED rear lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall, plug-in design * Perforated outer frame, approx. 45-degree angled edge with fixtures for mounting 3-ton folding lashing brackets * Each corner equipped with 1 x 10-ton lashing point plus 2 additional 10-ton and 3 x 6.3-ton lashing rings on each side * Various holes in front and rear cross members for 1.2-ton lashing options * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for optional retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, mechanical rear supports, drive-on ramps, rear tailgate are hot-dip galvanized Kedpfxjr Dpz Ae Ad Ujlp * Axles, air tanks, flange drawbar eye, and front support winch painted in black * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Available from calendar week 13/2026 * Sample images (vehicle shown may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower system * SmartBoard as an info tool on the trailer with pressure sensors to display axle loads per axle group * Side underrun protection * Mechanically adjustable warning sign packages at front and rear * Front axle fully enclosed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Foldable (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated) mounted on the right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at the rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) Kodpstplv Njfx Ad Ujlp * Rubber covering on folding ramps and on the approach slope left and right (approx. 860 mm) * Rubber covering on longitudinal beams from front bulkhead to rear cross member * Hardwood flooring on the running surfaces of the low-bed platform * Four stake pockets each side with integrated 2 t lashing points * Load security package consisting of: 5 pairs of UVV lashing rings, swivel-mounted and retractable, loadable in all directions and embedded in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers up to 3 m overall width (not on the rear slope) * Plank holder under the loading area in longitudinal direction * Raised roller stop in front of bulkhead with 1 x 6.4 t lashing ring each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic lateral ramp shift * Rear support hydraulically operated (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 l/min up to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulic system * Turntable area loading deck: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded loading height: approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted in a black tone * Loaded loading height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20/2026

Durumu: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor Kledpjx Ipapjfx Ad Uop * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durumu: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel Kljdpfx Adsx Ipbaj Usp * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Durumu: kullanılmış, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, 2-axle TANDEM refrigerated trailer 7 m with 1 t tail lift. * THERMOKING LND-II MAX (diesel engine) and stationary refrigeration 380 V ELECTRIC * Vehicle no. for customer inquiries: 4593 No liability for printing or typographical errors Sale to trade customers only Subject to prior sale and error* Changes, prior sale, and errors expressly reserved. The description serves for vehicle identification and does not constitute a warranty in the legal sense. The description in the purchase contract is binding. * TOP SERVICE & QUALITY * We can gladly provide you with a LEASING-FINANCING-HIRE PURCHASE offer Warranty insurance is available on request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device can be arranged by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually Kledpfx Aoykxfled Uep * TOLL (Toll-Collect) can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ.) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1992, Üretim yılı: 1992, Donanım: ABS, Müller-Mitteltal abroll dorse Alman araç = Daha fazla bilgi = Boş ağırlık: 3.140 kg Taşıma kapasitesi: 14.860 kg Azami toplam ağırlık: 18.000 kg Satış fiyatı: € 1.500, US$ 1.771 Ksdpfx Adjxt Sd Ss Uelp

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Klsdsxt Rw Rspfx Ad Uep

Durumu: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem • Lowloader • Platform Trailer Immediate availability No. for inquiries: 11611 Delivery possible free to your address * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, dual wheels 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized headboard 400mm * Excavator bucket platform made from hardwood, bolted to the headboard * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifters with upright, adjustable springs for single-person operation * 4 UVV drop lashing rings (LC 6300daN) * Perforated outer frame (45°-folded with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm; fitting drop lashing rings LC 3000 daN at approx. 600 mm possible) with tight cross-members, high-profile head and tail sections, and rear entry slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN flush-mounted in the existing hole matrix in the outer frame, additionally * Additional lashing options through holes (Ø 50 mm, LC 1200 daN) in the head and end beams * Toolbox in front of the headboard * Side marker lights with indicator pulse * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable landing gear at front, folding supports at rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable; optionally with 50 mm eye available * 1 removable LED warning light at the rear---- * Leasing, hire purchase, financing, part exchange possible * e.g. 510 euros for 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 Outside business hours by appointment We speak German, English, Polish, French Kodpfxjyndh He Ad Uelp Leasing, financing, part exchange available

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Kljdpfoxw T Uaex Ad Ujp

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm Klodpfx Adoq Dyvyj Uep ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf