Kullanılmış Henra Alçak Yükleyici Römork satın al (16.425)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Semi 2P. Radmul.-Federhebewerkra.
Ara
Durumu: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm
- Neck height 200 mm with chamfered corners
- Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper)
- 2 king pin positions, replaceable 2" king pin
- Closed outer frame with perforated outer profile for lashing with tension straps
- Reinforced frame design / point load in center of gravity
Hnjdpfx Aijwu Agijfjk
- Preparations for extendable loading area wideners
- With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underride guard = extended end plate
- Drop supports at rear
Ramps:
- 2 single-piece aluminum drive-on ramps with spring-assisted lifting function
- Length x width approx. 2,500 mm x 600 mm
- Lockable in transport position using tension straps
- Manually sideways adjustable
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gears:
- Mechanical 24t landing gears, one-side operation with load compensation
Axles, Steering and Tires:
- BPW air suspension axles, 10t axle load each, air bag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake pads
- Automatic slack adjuster
- Lifting and lowering device, total stroke approx. 200 mm
- 2nd ride height via ball valve +50 mm
- 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Incl. tire pressure monitoring
Brake System:
- Dual-circuit brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Painting:
- Steel shot blasting, spray galvanizing of frame and primer
- Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey
- Plastic parts black, unpainted
- Rims: factory silver
- Reflective tape side and rear in yellow
Accessories:
- Plug-in side and rear boards on the swan neck, approx. 400 mm high
- Spare wheel holder
- Aluminum docking protection
- 4 wheel chocks
- Sheet metal mudguards with Clear-Pass
- Elongated license plate holder in end plate
- 1 plug-in ECE panel at rear
- 11 pairs of ZK modules 10t side:
- 2x on the swan neck
- 9x on the loading platform
- Without rear tow rings
- Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm
- 4 holders for warning signs, insertable into stake pockets on loading platform
- 6 pairs of stake pockets on the side for insertable stakes 100x50 mm
- 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions)
- 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle)
- 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underride guard
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Ara
Durumu: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook pick-up at front and rear
- Chassis length x chassis width approx. 2,200 mm x 2,850 mm
Excavator Deck 'BB-A':
- Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
- Loading height 550 mm with ground clearance 150 mm
4-Axle Rear Bogie:
- Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back
- Bogie length x bogie width approx. 5,480 mm x 2,850 mm
- Numerous lashing points
Pendulum Axle and Tyres (Front and Rear Bogie):
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Burst hose valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in raised position
- Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres: 285/70 R19.5
Remote Steering:
- Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring
- Socket for remote steering operation on the gooseneck
- Cable remote control with push-buttons including single-track alignment monitoring
Included Accessories:
- At the galvanized connection bar at the front: yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" kingpin
- One 7-pin socket at left and right rear of the gooseneck for warning signs
- Support bracket with winch for spare wheel at the front of the gooseneck
- Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings
- Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized
- Control lever on the gooseneck protected by a fold-down cover
- Separate air connection with air gun on the gooseneck
Hjdpfswcmhaex Aifjnk
- Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up
- 2 spare wheels
- One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign
- Front bogie with separate air connection for air tools
- Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel deck inserts can be placed in 2 positions to create a lowered loading area
- Steel mats with 12 mm thick rubber surface
- Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings
- One locking position every approx. 500 mm at the extension with mechanical lock
- Socket for cable remote control of the remote steering at the rear bogie
- 2 reversing lights on the rear panel
- Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light
- 1 work light left/right on the rear panel of the gooseneck with separate on/off switch
- Two INOX toolboxes approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
- Wireless remote control for the remote steering
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-A-S-hyd.Ladebo.-hyd.Rampen
Ara
Durumu: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°
- Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles
Two-part Steel Ramps:
- One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles, Suspension and Tyres:
- BPW axles and suspension, 2 axles rigid, 1 axle trailing steer
- Technical axle load: 12,000 kg
- Electro-magnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lowering valve
- Axle tools
- Tyres 235/75 R 17.5 3PMSF
- TPMS tyre pressure monitoring system according to ECE R 141
Included Accessories:
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the galvanized connection rail at the front
- 4 wheel chocks
- Galvanized folding supports under the chamfer of the loading area
- One holder for a beacon at the rear of the trailer
- Cover plates to bridge the gap between the ramps and the loading area
- White reflective tape according to EU regulations on the sides of the trailer and red on the rear
- Electro-hydraulic unit at the rear, under the loading area
- Holder for warning signs left and right on the gooseneck and ramps, including socket
- Control valves for the ramps located on the right side of the trailer
- European reflective boards (red-yellow) at the rear of the trailer
- Manual and description on USB stick
- On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm
- The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm)
- An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller
- Bolted 5t ring for running the winch cable on the gooseneck without pulley
- 2 pairs of WADER container pockets in the loading area for one 20ft container
Hnodpfx Aju Hp Hrjifok
- 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area
- Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status
- 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN)
- On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance
- BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump
- Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm
- 80 km/h speed stickers at the rear and on both sides
- Load gauge to determine axle loads, including load diagram
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter
Ara
Durumu: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 and 6 x 2
Loading Platform:
- Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6°
- Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
- Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area
Ramps:
- One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide
- Grating surface
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards
- Painted sand coating on the outer frame of the ramp as well as on the ramp tip
- Flashing lights on the outer side of the ramp tips with switch next to the ramp control
- Ramp locking in transport position with quick-release fastener
Axles, Suspension and Tyres:
- BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering
Hnsdpfouadk Nex Aifek
- 1st axle with starting aid
- Operated via the brake pedal of the tractor unit
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
- TPMS tyre pressure sensors fitted on all wheels including spares
Brake System:
- WABCO EBS-E braking system according to EU regulations
Paintwork:
- Trailer painted MB 7350 Novagrau grey
Accessories Included:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches
- Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide
- JOST Module B – static test load = 50,000 kg
- Continuous grating surface with 5 mm steel plate underneath as additional reinforcement
- Painted sand coating
- Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle
- 2" king pin
- Central lubrication system with one pump, brand BEKAMAX
- On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
- Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller
- WABCO Smart Board system
- 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Ara
Durumu: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
• Gooseneck with rear bevel approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Loading platform:
• Extendable loading platform with rear bevel approx. 500 mm x 8°
• 9 pairs of outwards folding lashing rings
• 1 pair of flat lashing rings at the front of the loading platform
• Cut-outs in the outer frame for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate covering above axles
Landing gear:
• JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles
• Technical axle load: 12,000 kg
• 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually
• Tyres 235/75 R 17.5 3PMSF
Braking system:
• WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M)
Paintwork:
• First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single colour MB 7350 Novagrau
• Rear section metallised and painted RAL 9010 (pure white)
Steel construction:
• Fabricated from high-tensile fine-grained steels
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Equipment:
• One spare wheel with holder in front of the bulkhead
• 2" kingpin
• Galvanised steel front bulkhead approx. 400 mm high
• Yellow-red air couplings on galvanised connection strip at the front
• 2 wheel chocks with holder mounted to the bulkhead
• Provision at rear of gooseneck for ALU loading ramps
• Galvanised extendable deck wideners, approx. 230 mm per side
• Bracket for beacon at the rear of the trailer
• Galvanised supports under the rear bevel of the loading platform
• White reflective tape to EU regulations on sides, extension; red at the rear
• Mounting hardware for warning signs with socket at gooseneck and rear, left and right
• Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm
• Removable rear galvanised stanchions (body length approx. 2,560 mm)
Hnedpema Hf Rjfx Aifok
• 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame
• Lift axle on front axle with TEBS E control, responsive to axle load and load status
• Adjustable mounting rails for ALU loading ramps at rear
• 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel
• BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection
• 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm
• Mounting for beacon on warning signs
• European reflective plates (red-yellow) at rear of trailer
• 80 km/h speed stickers on rear and both sides
• Load gauge to determine axle loads including load diagram
• HRM Metallisation (High Resistance Metallisation) of outer frame
• Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Ara
Durumu: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4.
Loading Platform:
Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned.
Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length.
Axles and Tyres:
BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion.
Sockets and Lighting:
24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850.
Paint Finish:
6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax.
Accessories:
Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us.
3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide.
Hedpfjrigw Rsx Aifenk
2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle.
1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard).
Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit.
Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included.
One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version.
Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity.
Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Jumbo-Semi mit Plane
Ara
Durumu: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading Platform:
5 pairs of fold-out lashing rings on the outside
3 pairs of fold-out lashing rings on the outside
1 pair of horizontal lashing rings at the front end of the platform
Cut-outs in the outer frame of the loading platform for attaching tension straps
Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles
Landing Gears:
JOST landing legs with 2-speed gearbox, lifting capacity 24 t
Axles and Tyres:
BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function
Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Axle tool
Tyres 205/65 R17.5 3PMSF
Brake System:
WABCO brake system according to EU regulations, with EBS-E
Steel Construction:
High-strength fine-grained steel construction
Steel Grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical Equipment:
Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets
Connections according to ISO
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer
Premium 2-component topcoat, single colour in MB 7350 Novagrau
No metallic finish possible
Rear section metallized and painted RAL 9010
Accessories Included:
1 spare wheel 205/65 R 17.5
TPMS tyre pressure monitoring system according to ECE R 141
Hnjdpfstphtmex Aifsk
Galvanized front connection bar with yellow-red air couplings
4 chocks with holder at the front wall
Mounting at rear of gooseneck for ALU loading ramps
Galvanized folding supports under the loading platform’s rear chamfer
Holder for a warning beacon at the rear of the trailer
Height-adjustable tarpaulin superstructure
Galvanized front wall with tensioning mechanism for sliding curtains
Height-adjustable by approx. 400 mm
Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls
On platform: 3 pairs of adjustable stanchions
Rear of superstructure can be hydraulically widened left and right by approx. 750 mm
Sliding roof with upward swinging portal beam
Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals
Height upper edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will damage the tarpaulin
Suspension rail for ALU loading ramps at the rear of the vehicle
At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket
Mudflap at the rear of the trailer
European reflector boards at the rear of the trailer
7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
Lift axle on the front axle with TEBS E control, depending on current axle load and loading status
Rear of superstructure with closed ALU wing doors
Anti-slip sand finish painted on checker plates on gooseneck and platform
Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump
80 km/h speed sticker at rear and on both sides
Load gauge for axle load determination including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Ara
Durumu: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
Hjdpfx Aiewhywfefenk
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Ara
Durumu: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm
- Neck height 200 mm with beveled corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper)
- 2 king pin positions with interchangeable 2” king pin
- Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps
- Reinforced frame design / point load at the center of gravity
- Prepared for extendable load width extensions
- With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underrun protection = extended end plate
- Drop-leg stabilizers at rear
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Axles, Steering, and Tires:
- BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lift and lowering mechanism, total travel approx. 200 mm
- 2nd ride height setting via ball valve +50 mm
- 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer
- 3rd axle is a friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, with centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring
Brake System:
- Dual-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Paintwork:
- Steel shot blasting, chassis spray galvanizing and priming
- Painting of chassis/hub/outer frame in DB 7350 Novagrau
Accessories:
- Removable drop sides and tailboard on gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Metal mudguards with Clear-Pass
- Long number plate holder integrated in end plate
- 1 removable ECE plate at rear
- 11 pairs of ZK-modules 10t side-mounted:
- 2x on the gooseneck
- 9x on the loading area
- Without rear towing eyes
- Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm
- 4 holders for warning signs, insertable in stake pockets on loading area
Hnedpfjwu A Sljx Aifsk
- 6 pairs of side stake pockets for insertable stanchions 100x50 mm
- 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions)
- 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container
- Rubber apron mounted on underrun protection
- Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation
- Mechanical landing legs 24t, single-sided operation with load compensation
Optionally, the trailer is available with aluminum approach ramp
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Ara
Durumu: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
Hnsdpfx Aoh Hm Thjifjk
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Goldhofer6-Achs-Tele-Semi mit hydr.Rampen-zwangs.
Ara
Durumu: kullanılmış, azami yük ağırlığı: 75.700 kg, toplam ağırlık: 93.200 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2008, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 885 mm, lastik boyutu: 245/70 R17.5, renk: beż, Üretim yılı: 2008, Gooseneck, fixed, in central beam design:
- Loading area 3,700 mm x 2,480 mm
- Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at gooseneck end)
- Closed outer frame
- Max. kingpin load 26,000 kg
- Articulation radius 2,700 mm
- 2" kingpin
- Wooden floor
- Hydraulically operated landing legs
- One-piece aluminum drop sides, 400 mm high, three sides closed including tailgate, folding and removable stanchions
- 2 pairs of lashing points LC 8,000 daN
Loading area:
- Single-stage extendable, continuous over running gear
- Designed as an outer/inner tube structure with a 1,090 mm long fixed deck section at the front
- (L x W) 8,700 mm x 2,550 mm, extendable by 6,700 mm to a max. of 15,400 mm
- Steel plate flooring
- Locking of extension stages via spring-loaded cylinder and cone bolt
- Vehicle optimized for maximum extension
- 7 pairs of lashing points LC 13,000 daN
- 6 pairs of lashing points LC 6,000 daN
- 6 pairs of stanchion pockets 100 x 50 mm (LC 2,000 daN)
6-axle chassis:
- 1 rigid axle, 5 forced steered axles
- Axle make: SAF
- Chassis width 2,550 mm
- 1st axle is a load-dependent lift axle
- 2nd axle can be lifted manually (not load-dependent)
- Axle spacing, starting from first axle 1,310 mm
- Twin tires 245/70 R 17.5
- Air suspension, stroke 200 mm
- Ride height: 885 mm +100 mm / -100 mm
- 2nd ride height: 845 mm +140 mm / -60 mm
- Steel/wood floor covering
Rear of vehicle:
- "Beveled" design (600 mm long, 10° bevel)
- 1,000 mm rear overhang from center of last axle
- Removable ramp eye at end cross member
- Mechanical support for stability during loading
- 1 pair of lashing points LC 6,000 daN
Hjdpfx Asxp U Tzeifsnk
- 1 pair of lashing points LC 13,000 daN
Loading ramps:
- Two-part ramps, length 2,850 mm + 1,540 mm, width 720 mm
- Ramp lifting gear hydraulic
- SuperGrip rubber surface
- Climbing strips on ramp edges 20 mm x 20 mm x 100 mm
- Laterally adjustable by hydraulic cylinder to max. external width of 2,790 mm or minimum internal distance of 480 mm
- Integrated mechanical lock in ramp lifting cylinder for securing ramps in transport position
- Mount for revolving warning beacon
Hydraulics:
- Hydraulic connection for tractor unit (1 set), connections for the tractor, hydraulic pump in tractor unit with max. delivery capacity 60 l/min
- Manual emergency hydraulic pump
- Electro-hydraulic unit
Steering assist:
- Steering cylinder for manual control of trailer axles via cable remote control, spiral cable extendable from 1.5 m to 5 m
Accessories included:
- Spare wheel holder on front of gooseneck, plug-in, galvanized
- Mounting bracket for stanchions on gooseneck
- 2 pairs of warning plates, approx. 423 mm x 423 mm
- Widening incl. widening planks, attachable widening element at vehicle rear
- 1 pair of wheel chocks incl. holder
- 1 spare wheel
- Central lubrication system with 2 pumps
- Paint finish single color RAL-1001 beige
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Tele-Semi 1P. Radmul.-Federhebew.
Ara
Durumu: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis:
- Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm
- Neck of frame 200 mm with chamfered front corners
- Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel)
- 2 king pin positions with interchangeable 2” king pin
- Outer frame closed to the outside as perforated outer frame
- Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically
- Frame before and after partition with 80x80 mm step
- Reinforced frame version / point load in retracted position at the center of gravity
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle
- 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm
- Underrun protection = extended end plate
- Drop legs at the rear
Ramps:
- 2 single-piece aluminum loading ramps, special design with spring lift system
- Length x width approx. 2,500 mm x 600 mm
- Can be secured for transport with lashing straps
- Laterally manually adjustable
Axles, steering, and tires:
- BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lifting and lowering device with total stroke approx. 200 mm
- 2nd driving position via ball valve +50 mm
- 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, with center offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Includes tire pressure monitoring
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing gears:
- Mechanical 24 t landing gears with one-sided operation and thrust compensation
Paintwork:
- Steel shot blasting, sprayed zinc coating and priming of the chassis
- Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey
- Reflective tape on sides and rear in yellow
Hnsdpfsxnym Dox Aifsk
Accessories:
- Removable sideboards and rear wall on the swan neck, approx. 400 mm high
- Spare wheel holder
- Lateral aluminum side impact protection
- 4 wheel chocks with holder
- Long license plate holder on the end plate
- 1 ECE sign at the rear, plug-in type
- 11 pairs of ZK modules 10 t on the side:
- 2x on the swan neck
- 2x on the platform before extension
- 7x after extension
- Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm
- 4 plug-in warning board holders in stanchion pockets on the loading platform
- 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm
- 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions)
- 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle)
- 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
MartzAuto Transporter Anhänger 1,5t 3,6m NEU
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 425 kg, azami yük ağırlığı: 1.075 kg, toplam ağırlık: 1.500 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 3.610 mm, yükleme alanı genişliği: 1.900 mm, lastik boyutu: 10", lastik durumu: 100 yüzde, Üretim yılı: 2026, Scope of delivery:
Hsdpfsx Dm Iyex Aifonk
1x car transporter trailer with winch and tilting function, 1500kg
Description:
Car transporter trailer equipped with a winch, tilting function, and loading ramps. The pre-installed winch—with a cable length of 12m—allows for easy loading and transport of vehicles, including those that are no longer roadworthy.
Thanks to the tilting mechanism and additional loading ramps, the trailer offers a low approach angle, facilitating the loading of vehicles with low ground clearance.
The ramps are adjustable and securely stowed under the loading platform with a safety lock.
Technical specifications:
- Tiltable
- Braked
- Plastic wheel chocks with holder
- Equipped with winch
- Plug holder
- Welded frame
Gross weight: 1500kg
Plug type: 13-pin
Unladen weight: 425kg
Payload: 1075kg
Overall length: 5150mm
Overall width: 2040mm
Overall height: 800mm
Loading platform length: 3610mm
Loading platform width: 1900mm
Jockey wheel: Yes
Brakes: Yes
Wheel chocks: Yes
Shock absorbers: No (surcharge: 109,- EUR for 100km/h upgrade)
Küçük ilan
Ardagger Stift
1.929 km
Alçak yükleyici yarı römork
HRD
Ara
Durumu: kullanılmış, boş ağırlık: 7.440 kg, azami yük ağırlığı: 42.000 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, renk: kırmızı, römork freni: frenli römork, Üretim yılı: 2009, Donanım: ABS, Satılık sağlam bir HRD düz yataklı dorse, SPLB 3 S tipi, 2009 model, EN 12642-XL sertifikalı ön duvarı ve kapsamlı donanımı ile.
İkinci ön duvar taşınabilir / değişken şekilde monte edilebilir
Hsdjx Akvrspfx Aifjnk
Takılabilir dikmelik
Tabana entegre 8 adet konteyner kilidi - 20 ft / 40 ft konteynerler için uygun
Aydınlatmalı geniş yük uyarı panoları (çekilebilir)
Lastikler %50'den fazla diş derinliğine sahip
Yan paneller kısmen mevcut (tamlığı kontrol edilmemiştir)
Tahta döşeme sağlam durumda, yaşına uygun kullanım izleri vardır
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
Martz AnhängerHochlader Universal Transporter 3t 5m
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 666 kg, azami yük ağırlığı: 2.332 kg, toplam ağırlık: 3.000 kg, yükleme alanı uzunluğu: 5.070 mm, yükleme alanı genişliği: 2.110 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 10, Üretim yılı: 2026, Scope of delivery:
1x Car trailer, high-loader, aluminium side walls, 507x211 cm, 3000 kg
Description:
Premium multifunction trailer!
This trailer features aluminium side panels, ideal for transporting a wide range of goods. It also comes equipped as standard with a winch for added operational support. Loading ramps are securely stored underneath the load platform. Lashing rings on the sides allow you to quickly and easily secure your cargo at any time.
Technical specifications:
- Automatic jockey wheel
- Aluminium side walls
- Winch
- Loading ramps
- Lashing rings
- Chocks with holder
Gross weight: 3000 kg
Unladen weight: 666 kg
Payload: 2332 kg
Load area length: 5070 mm
Load area width: 2110 mm
Overall width: 2150 mm
Overall length: 6570 mm
Overall height: 890 mm
Side wall height: 300 mm
Hnodsuyt Rbepfx Aifek
Side wall material: Aluminium
Manufacturer: Martz
Trailer type: Box trailer
Suspension type: Rubber torsion axle
Drawbar type: V-drawbar
Floor: Screen-printed floor
Tyres: 195/55 R10C
Frame type: Welded
Frame material: Steel
Usage: Universal
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
Martz Alu Hochlader 2t 365cm x 171cmAnhänger NEU
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 470 kg, azami yük ağırlığı: 1.530 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.650 mm, yükleme alanı genişliği: 1.710 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Scope of delivery:
1x Car Trailer High-loader Aluminium Tandem Trailer 365x171cm 2000kg
Description:
Multipurpose trailer designed for transporting various types of materials. The wheels are positioned underneath the loading platform – this extends the loading area and raises it higher than other luggage trailer series, making manual loading and unloading easier. All side walls are removable, allowing goods to be freely loaded, for example with a forklift.
The chassis is made of construction steel, featuring a closed, bolted profile. The floor is a high-quality, waterproof and anti-slip phenolic plywood.
Technical Specifications:
- Braked
- Tandem axle
- Jockey wheel
- Wheel chocks with holder
Gross weight: 2000kg
Unladen weight: 470kg
Payload: 1530kg
Loading area length: 3650mm
Loading area width: 1710mm
Total width: 1860mm
Total length: 5020mm
Overall height: 1000mm
Side wall height: 300mm
Side wall material: Aluminium
Manufacturer: Martz
Plug type: 13-pin
Trailer type: Box trailer
Number of axles: 2 axles
Suspension type: Rubber torsion axle
Drawbar type: V-drawbar
Wheel position: underfloor
Floor: Phenolic plywood
Tyres: 195/50 R13C
Trailer type: High-loader
Frame type: Bolted
Frame material: Steel
Applications: Construction material transport, removals/furniture transport, goods transport, and more.
Hnsdpoxq Eghefx Aifjk
Shock absorbers: No (optional: €199 surcharge for 100 km/h upgrade)
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
MartzAnhänger Maschinenanhänger 5m 3,5t
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 897 kg, azami yük ağırlığı: 2.603 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.070 mm, yükleme alanı genişliği: 2.100 mm, lastik boyutu: 10, Üretim yılı: 2026, Scope of delivery:
1x Car Transporter / Machinery Trailer, tiltable, with winch and ramp, 507x210 cm, 3500 kg
Description:
Our machinery transporter / car transporter is the perfect solution for transporting standard vehicles and machinery.
Thanks to the low loading angle, made possible by the hydraulic system and ramp, more vehicles can be transported easily compared to conventional car transporters.
Hnedpfxeuyhdis Aifjk
With a loading area length of 5070 mm and a payload capacity of up to 2624 kg, our trailer is ideally suited for transporting larger and heavier vehicles as well as loads.
The transport surface is made of non-slip, waterproof plywood, providing additional safety.
Comfort has not been overlooked: The integrated winch, built-in lashing eyes, and automatic jockey wheel make handling significantly easier for you.
Technical data:
- 3 axles
- Winch
- Lashing eyes
- Hydraulic system
- Automatic jockey wheel
- Ramp with shock absorber
- Welded, hot-dip galvanized frame
Gross weight: 3500 kg
Unladen weight: 897 kg
Payload: 2624 kg
Length of loading area: 5070 mm
Width of loading area: 2100 mm
Overall width: 2210 mm
Overall length: 6630 mm
Overall height: 940 mm
Manufacturer: Martz
Trailer type: Car transporter
Drawbar type: V drawbar
Floor: Anti-slip plywood
Frame type: Welded
Frame material: Steel
Purpose: Machinery transport, car transport, heavy load transport
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
MartzAnhänger ALU Hochlader 2t 325cm x 171cm
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 452 kg, azami yük ağırlığı: 1.548 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.250 mm, yükleme alanı genişliği: 1.710 mm, yükleme alanı yüksekliği: 300 mm, Üretim yılı: 2026, Scope of delivery:
1x Car Trailer High Loader Aluminium Tandem Trailer 325x171cm 2000kg
Description:
Multi-purpose trailer designed for the transport of various types of materials. The wheels are positioned underneath the loading platform – providing a wider and higher loading area compared to other box trailer series, which facilitates manual loading and unloading.
All side walls are removable, allowing free access for loading, for example with a forklift. The subframe is made from structural steel with a closed profile and is bolted together. The floor is made of high-quality, waterproof, and anti-slip phenolic plywood.
Technical specifications:
- Braked
- Tandem axle
- Jockey wheel
- Wheel chocks with holder
Gross weight: 2000kg
Unladen weight: 452kg
Payload: 1548kg
Loading area length: 3250mm
Loading area width: 1710mm
Overall width: 1850mm
Overall length: 4660mm
Overall height: 1000mm
Side wall height: 300mm
Side wall material: Aluminium
Manufacturer: Martz
Plug type: 13-pin
Trailer type: Box trailer
Number of axles: 2 axles
Suspension: Rubber spring axle
Drawbar type: V drawbar
Wheel position: below floor
Floor: Phenolic plywood
Hnjdpfx Ajuxminjifek
Wheels: 195/50 R13C
Loader type: High loader
Frame type: Bolted
Frame material: Steel
Intended use: Building material transport, removals / furniture transport, goods transport, etc.
Shock absorbers: No (Option: €199 surcharge for 100 km/h upgrade)
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
STEMAAnhänger Tieflader 251cm x 128cm x 1,3t
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: STL1300, azami yük ağırlığı: 1.055 kg, toplam ağırlık: 1.300 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.510 mm, yükleme alanı genişliği: 1.280 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 13, Üretim yılı: 2026, STL 1300 Trailer with Multifunctional Equipment:
- Foldable and removable tailgate
- Durable, high-quality corrosion protection
- Side panels made of single-wall steel sheet with Galvalume (aluminum-zinc coating)
- Robust drop bolt latches
- Fixed front wall
- 35 cm high
- Mounted eyelets for securing tarpaulins and nets
- Optimal road stability thanks to test-track-approved chassis with STEMA safety V-drawbar
- Coupling hitch with safety indicator
- Partially hot-dip galvanized
- Bolted chassis
- Continuous, anti-slip, waterproof phenolic plywood floor
- 12 mm thick
- Additional cross members for floor support
- Modern multifunctional lighting
- With reverse light
- With rear fog lamp
- 13-pin plug, EU equipment
- Marker lights
- Robust rubber spring axle with independent wheel suspension
- Maintenance-free compact wheel bearings
- Impact-resistant plastic mudguards
- Equipped with splash guards
- Wheel chocks with holder
- 6 recessed lashing rings, integrated into the loading area frame
Hodpouw Sqnjfx Aifsnk
Technical Data:
Total weight: 1300 kg
Payload: 1055 kg
External dimensions (L x W x H in cm): 373 x 177 x 90
Bed dimensions (L x W x H in cm): 251 x 128
Tyres (inch): 13
Brakes: YES
Jockey wheel: YES
Shock absorbers: NO (upgrade for 100 km/h available for EUR 109)
Maximum speed: 80 km/h
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici römork
HumbaurHTD30K-RM-BM / Luftfederung
Ara
Durumu: yeni, boş ağırlık: 6.700 kg, toplam ağırlık: 30.000 kg, yükleme alanı uzunluğu: 8.550 mm, yükleme alanı genişliği: 2.540 mm, Üretim yılı: 2026, Donanım: tır çekici bağlantısı, HTD30K- RM-BM / Air Suspension
Technical Data:
Internal dimensions: approx. 8,550 mm x 2,540 mm
Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm
Permissible total weight: 24,000 kg
Payload: approx. 17,300 kg
Tires: 235/75 R17.5 twin tires
Loading height: approx. 900 mm
Drawbar length: approx. 1,800 mm
Coupling height: approx. 800–980 mm
Plank length: approx. 3,150 mm
Plank width: approx. 750 mm
Permissible total weight (special permit): 30,000 kg
Payload (special permit): approx. 23,300 kg
Low bed length: approx. 6,500 mm
Overall length (B-dimension): 10,800 mm
Technical gross weight: approx. 33,000 kg
8 pairs of lashing rings, 3,000 kg per lashing point, located in the outer frame
3 pairs of lashing rings, 10,000 kg per lashing point, recessed in the low bed
2 pairs of lashing rings, 10,000 kg per lashing point, recessed in the rear bed
4 pairs of lashing rings, 2,000 kg per lashing point, above the wheel cutouts 2nd and 3rd axle
7 pairs of lashing rings, 3,000 kg per lashing point, stake pockets (90x50 mm) with lashing option
Standard Equipment:
Axles
Low loader axles from renowned manufacturers
Suspension
Air suspension unit including lifting and lowering function, acting on the rear axle aggregate
Braking System
Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake
Including 2 external test connections
for brake/modulator and bellows pressure
Electrics
LED lighting with indicator function
for side marker lights, multivoltage (12–24V)
Turntable
Heavy-duty welded construction with low-maintenance ball bearing turntable
Drawing Device
Drawbar with 8° angled towing eye Ø40 mm, height adjustable, low-maintenance silent bushings
Frame
Robust welded structure made from high-strength fine-grain steel
Continuous cross-members for maximum stability
Front wheel recess (top length approx. 2,170 mm); rear wheel recess (top length 1,280 mm), depth 330 mm
Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm)
Maximum safety during loading and unloading
Hedpfx Ajq Ulaqjifonk
Flooring
50 mm softwood planking
Ramps
One-piece hot-dip galvanized loading ramps
(3,100 mm x 750 mm) with 50 mm softwood planking, laterally shiftable
Direct-acting upright spring assist for easy operation
Optimum securing by tension lock and counter-stop
Finishing
Chassis and turntable frame hot-dip galvanized by immersion
Support
2 folding supports at the rear left and right of the vehicle
Features
Foldable side underrun protection
Other
Retro-reflective markings according to ECE Directive R48: white on the side, red at the rear
Front wheel recess cover with 2 pairs of stake pockets, without planking (cover retractable under the longitudinal beams)
Hardwood flooring for RM covers front and rear wheel recess covers
Storage box at the top front of the platform area, with folding lid, size approx. L 700 x D 810 x H 140 mm
LED warning package, HTD offset Aspöck warning panels (4), electrics and beacon
3 m accessory kit without loading ramp bevel for HTD30K wheel recess low loaders with 6,500 mm low bed, folding extension with spruce planks for the flat area of the low bed
Basic hydraulics for trucks with rear connection, operating pressure max. 200 bar, up to 150 l/min with 2-circuit hydraulic connection and return with quick coupling SVK BG3
Hydraulic ramp shift side-to-side by approx. 300 mm each side
Hydraulic ramp lifter for single-piece ramp
Hydraulic support legs left and right, suitable for stepped l
Küçük ilan
Nürnberg
2.232 km
İnşaat makineleri için alçak yükleyici römorklar
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Ara
Durumu: yeni, boş ağırlık: 10.650 kg, azami yük ağırlığı: 39.350 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.830 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 5-AXLE SWING BOGIE LOWBED TRAILER, HOT-DIP GALVANIZED
=> FULL AIR SUSPENSION
=> HOT-DIP GALVANIZED
IN TOP CONFIGURATION!!!!
* AS LIFT AXLE
* AS SELF-STEERING FOLLOWING AXLE
• SAF – LOWBED AXLES
• AIR SUSPENSION
Hodpfxshmm Rce Aifsnk
• ONE-PIECE LONG LOADING RAMPS
• HYDRAULIC RAMP LIFTER
• HYDRAULIC REAR SUPPORTS
• HYDRAULIC SIDE SHIFTING
• HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE
• EXCAVATOR ARM TROUGH
• CHASSIS AND BOGIE FRAME HOT-DIP GALVANIZED
• OUTER FRAME ADDITIONALLY PAINTED IN RED
• LOADING RAMPS HOT-DIP GALVANIZED
• 10 t RECESSED LASHING POINTS IN LOADING PLATFORM
• 3 t LASHING POINTS IN OUTER FRAME (High Deck)
• 6 t LASHING POINTS IN OUTER FRAME (Lowbed)
• 4 pairs of 3 t lashing points in outer frame (Lowbed)
• LASHING POINTS IN EXCAVATOR ARM TROUGH
• 3-METER WIDENING PACKAGE
• FOLD-OUT EXTENSIONS
• WOODEN PLANKS IN STEEL BOX UNDER LOADING PLATFORM
• SECOND STEEL STORAGE BOX UNDER LOADING PLATFORM
• WARNING SIGNS
• REAR BEACON LIGHT
• REAR STEPS
• 2 STORAGE BOXES IN HIGH DECK
• DIGITAL AXLE LOAD DISPLAY
• WABCO SMARTBOARD
• AIR SUSPENSION
• LIFT-AND-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING AND UNLOADING)
• STAKE POCKETS IN OUTER FRAME
• TWO STAKE POCKETS INCLUDING DROP-IN STAKES AT FRONT END
• EBS - ELECTRONIC BRAKING SYSTEM
B-DIMENSION = approx. 11,790 MM
=> Freight cost for delivery: €2.90 plus VAT per km
=> Prices ex D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and changes!*
*Price valid ex D-86368 Gersthofen*
*Sale only to business customers!*
*Images may deviate and are for general guidance only – may include/show accessories for extra charge*
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Salzburg
2.037 km
Alçak yükleyici yarı römork
GoldhoferSTZ-VKL 3-34/80 A with Extension beam´s
Ara
Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 57.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 945 mm, renk: mavi, Üretim yılı: 2008, Bu düşük yataklı treylerden iki adet mevcut
Üretici: Goldhofer
Tip: STZ-VKL 3-34/80 A
Yıl: 2008
Toplam ağırlık: 54.000 kg
Boş ağırlık: 21.000 kg
Yük kapasitesi: 33.000 kg
Toplam tren uzunluğu: 20.000 mm (maks. teleskopik 24.200 mm)
Yükleme alanı (uzxgen): 7.300 mm x 2.750 mm (teleskopik olarak 4.200 mm’ye kadar)
Lastikler: 235/75 R 17,5
Hjdpfxjxc U Nvj Aifonk
Ekstra:
Uzatma kirişi: 2x 6.000 mm
Küçük ilan
Diespeck
2.278 km
Alçak yükleyici römork
PoppZA 10/50 ZB
Ara
Durumu: kullanılmış, boş ağırlık: 2.600 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/1993, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.000 mm, yükleme alanı hacmi: 12 m³, lastik boyutu: 205/65 R17,5, dingil mesafesi: 990 mm, Colour: orange/silver
Drum brake
Payload: 7,400 kg
Leaf suspension
Side walls: 600 mm + 400 mm extension
Hedpfxstr Tzdj Aifjnk
BPW axles
Lashing rings
Errors and omissions excepted
Küçük ilan
Adlkofen
2.121 km
Alçak yükleyici römork
ReckerJTA24
Ara
Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: W09T242247GR27178, boş ağırlık: 6.260 kg, azami yük ağırlığı: 17.740 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2025, yükleme alanı uzunluğu: 4.450 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 13.950 mm, toplam genişlik: 300 mm, toplam yükseklik: 1.220 mm, süspansiyon: hava, lastik boyutu: 285/70R19,5 --/147J, dingil mesafesi: 6.844 mm, renk: mavi, römork freni: frenli römork, Üretim yılı: 2007, Donanım: ABS, Teklif edilen, 2007 model Gebr. Recker üretimi 24 tonluk alçak yataklı treylerdir.
İnşaat, tarım ve orman makinelerinin taşınması için uygundur.
Yaklaşık 60.000 km önce komple revizyondan geçmiştir:
- Elektrik sistemi yeni
- Hidrolik sistemi yeni (hortumlar ve borular)
- Hava sistemi yeni (ABS ve EBS dahil)
- Arka taşıyıcı (arka aks)
- Tamamen kumlanmış, sıcak daldırma galvanizli ve boyanmış
Hedpjxx U H Hsfx Aifenk
Alçak yatak kısmı uzunlukta 2,5 m'ye kadar uzatılabilir (toplam uzunluk kapalı: 4,45 m; tamamen uzatılmış: 6,95 m).
Genişlikte ise 3 m'ye kadar açılabilir (kapalı: 2,55 m; açılmış: 3,00 m).
Yükleme yüksekliği: Platformda 40 cm, rampa oyuklarında 20 cm'dir.
Sizin için aramayı kolaylaştırıyoruz: "henra alçak yükleyici römork"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






























































































































































































































































