Kullanılmış Faymonville Max Trailer 3-Achs-Tiefbett Mit Pendelachsen satın al (52.202)

Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Djdpfx Aksw Tpq Djyokn Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Dkodpfow Tprzox Akyjn Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh

Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° Djdjw Tpqwspfx Akyskn * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Koşul: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side Dsdpeu Sd U Uofx Akyskn * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Koşul: ikinci el, boş ağırlık: 2.140 kg, azami yük ağırlığı: 7.860 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 11/2021, süspansiyon: hava, lastik boyutu: 315/70 R22,5, Donanım: ABS, | M-Trailer 1-Axle Dolly (MT-03K1) | Gross weight: 11,000 kg | Payload: 7,860 kg | Tyres: 235/75 R17.5 | twin tyres | BPW axles with drum brakes | rear support | Subject to errors, input mistakes, and prior sale. Djdpsy Tnbvjfx Akyokn

Koşul: ikinci el, azami yük ağırlığı: 23.340 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2002, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.520 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 2.300 mm, Donanım: ABS, Nooteboom düşük şasi alçak şasi römork + kuğu boynu ve 3 yönlendirilebilir aks Tip: EURO5403 Taşıma kapasitesi: 23.340 kg Fren: Tambur + Sökülebilir kuğu boynu + Tüm akslar uzaktan kumanda ile yönlendirilebilir + Uzaktan kumanda Dkodpfx Asy Rvuxskyon Finansman/Leasing konusunda da ortaklarımızla birlikte size memnuniyetle destek oluruz. Tüm bilgiler bağlayıcı değildir. Hata ve ara satış hakkı saklıdır.

Koşul: ikinci el, toplam ağırlık: 133.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2023, Donanım: ABS, Semi-trailer – Vehicle Identification Number: XNJ55H5XX23H01262 – First registration: 29.11.2023 DOLLY – Vehicle Identification Number: XNJ33H5XD23H01262 – First registration: 29.11.2023 ELECTRO-HYDRAULICS with NATO socket – or machine hydraulics German registration Unladen weight: Trailer: 27,140 kg – DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – interchangeable kingpin – 3.5" Turntable clearance front approx. 1,732 mm Hydraulically detachable and height-adjustable gooseneck – length 4,020 mm Low bed: length: 8,000 mm, width: 2,870 mm – loading height: approx. 560 mm TELESCOPIC extension up to 5,800 mm CAN BE WIDENED up to 3,240 mm Chassis frame: length: 7,410 mm, width: 2,750 mm – loading height: approx. 1,100 mm Total length with dolly: 24,622 mm – without dolly: 20,140 mm Excavator trough – dipper well Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steering axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – tyre condition approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Dsdpfx Aox Ialvokyjkn Amendments, prior sale, and errors are expressly reserved. The description is for general identification of the vehicle only and does not constitute a guarantee as understood in the sense of sales law. The description according to the purchase contract is authoritative. Our offer is generally without new TÜV approval. If a new TÜV approval is desired, we will be happy to provide a quotation from our partner workshops! Vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2010, Donanım: ABS, Semi-trailer - Vehicle Identification No.: W09PG3009A0M49815 - First registration: 25.08.2010 DOLLY - Vehicle Identification No.: W09PG3009A0M49816 - First registration: 25.08.2010 ELECTRO-HYDRAULICS German inspection (HU) valid until 04/2026 - Safety inspection (SP) due Empty weight: Trailer: 16,850 kg -- Dolly: 2,240 kg Fifth wheel height: 1,280 mm - Interchangeable kingpin - 3.5" Dedpfx Akjwxi Nroyskn Turntable clearance at front approx. 1,640 mm --Hydraulically lowerable and height-adjustable gooseneck - length 3,750 mm Low bed: Length: 6,850 mm Width: 2,750 mm - Loading height: approx. 350 mm TELESCOPIC EXTENSION up to 4,000 mm CAN BE WIDENED up to 3,210 mm Chassis frame: Length: 4,100 mm Width: 2,750 mm - Loading height: approx. 1,035 mm Overall length: 14,700 mm Excavator trough - bucket recess Central lubrication system GIGANT axles - PENDULUM AXLES with drum brakes with radio remote control 3 x hydraulically suspended and forced-steered axles Axle load 3 x 12,000 kg Maximum fifth wheel load 25,000 kg Tyres: 245/70 R 17.5 Matching 1-axle DOLLY BPW Eco axle with drum brake Air suspension Modifications, prior sale, and errors excepted. The description serves for general identification of the vehicle and does not constitute a guarantee in terms of purchase law. The purchase contract description is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer through our partner workshops! Vehicle may have advertising stickers and/or labeling. Our general terms of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 27.199 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, yükleme alanı uzunluğu: 13.310 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 86 m³, Donanım: ABS, * 5412 - Telefonla yapılacak sorgulamalar için araç kimlik numarası * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz akslar, disk frenler, havalı süspansiyon (yükseltme ve alçaltma), lift aks, depolama kutusu, portal kapılar, kirişli çift kat Dkodpfoxth R Ijx Akyon * Carrier Maxima 1300, Dizel (MOT 4.648 saat), Elektrik (SBY 3.326 saat), -30°C / +30°C * Kasa folyo ile kaplanmış / reklamlı! * 1. aks lastikleri: 385/65R22,5 (4 / 7 mm) * 2. aks lastikleri: 385/65R22,5 (3 / 8 mm) * 3. aks lastikleri: 385/65R22,5 (9 / 3 mm) ----e-posta adresimiz:     sizin için sunduğumuz hizmetler:       - Kısa süreli veya gümrük plakası temini       - Avrupada nakliye / teslimat       - Üçüncü ülkelere araç gümrük işlemleri Eğer Rusça sorularınız varsa şu numaradan arayabilirsiniz: * Yalnızca Rusça konuşanlar için WhatsApp: * İngilizce, Almanca ve diğer diller için WhatsApp:

Koşul: ikinci el, azami yük ağırlığı: 27.206 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2010, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.310 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, Donanım: ABS, * 7861 - Telefonla sorular için araç kimlik numarası * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz akslar, disk frenler, havalı süspansiyon kaldırma ve indirme fonksiyonu, kaldırılabilir aks, alet kutusu, çift kanatlı arka kapılar, kirişli çift kat * Carrier Maxima 1300, dizel (ENG 5972 sa), elektrik (SBY 5.243 sa), -30°C / +30°C * Kasa folyo/reklam kaplıdır! * 1. dingil lastikleri: 385/65R22,5 ( 3 / 4 mm ) Dksdpfx Aexth Rnekyon * 2. dingil lastikleri: 385/65R22,5 ( 7 / 6 mm ) * 3. dingil lastikleri: 385/65R22,5 ( 8 / 8 mm ) ----e-posta adresimiz: sizin için sunulan hizmetlerimiz: - Kısa süreli veya gümrük plakası temini - AB genelinde taşıma / teslimat - Araçların üçüncü ülkeye gümrük işlemleri Rusça olarak sorularınız varsa aşağıdaki numaradan arayabilirsiniz * WhatsApp sadece Rusça konuşanlar için: * WhatsApp, İngilizce, Almanca ve diğer diller için:

Koşul: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457 Specifications: Model year: 2012 3 axles Length: 1325 cm Net weight: 12,178 kg Dksdjy T D Sqepfx Akysn Gross vehicle weight: 59,000 kg 12-ton axles Steerable on all axles Ready for delivery Description: 2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension. The extension measures 14 meters. Ready for delivery. TÜV: Yes EU-approved until: 28.02.2027 Own weight: 12,178 Total weight: 59,000 Model: Telemax flatbed semi-trailer with 27-meter extension = Further information = Please contact ATS Norway for more information.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2016, toplam uzunluk: 13.900 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65/22.5, dingil mesafesi: 9.970 mm, renk: mavi, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanım = - Disk frenler = Diğer bilgiler = Aks konfigürasyonu Lastik ölçüsü: 385/65/22.5 Frenler: Disk frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30 Arka aks 2: Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30 Dsdpfxeyzqqps Akyekn Arka aks 3: Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30 Ağırlıklar Boş ağırlık: 7.362 kg Yük kapasitesi: 31.638 kg Azami yüklü ağırlık: 39.000 kg Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Ek bilgiler Daha fazla bilgi için Bas Wolfs ile iletişime geçebilirsiniz.

Koşul: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin Dkjdpfx Asrvw U Sjkysn • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Koşul: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Dsdpfx Akjyxc Eysyekn - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Koşul: yeni, boş ağırlık: 12.000 kg, azami yük ağırlığı: 54.000 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear tapering approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear tapering approx. 1,000 mm x 8° - 5 pairs of foldable lashing rings (LC 5,000 daN) - 3 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the outer frame of the platform for anchoring straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles checker plate Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Brake system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-strength fine-grained steel Axles and tires: - BPW axles and suspension, first axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle toolbox - TPMS tire pressure monitoring system according to ECE R 141 - Tires 245/70 R 17.5 3PMSF Included accessories: Djdpfx Akeykpbksyskn - 2" kingpin - One galvanized steel front wall approx. 400 mm high - At the front galvanized connection strip, yellow-red air couplings - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear steering, controllable from front and rear via cable remote control (push button), with axle alignment monitoring - European reflective plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and extension, red at the rear - Bracket for warning signs on left and right of the gooseneck and at the rear, with socket included - Galvanized, extendable side extensions approx. 230 mm per side - Bracket for a revolving beacon at the rear of the trailer - Galvanized drop down supports under the angled part of the loading platform - One mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable guard around the pump - ALU plug-in sideboards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck - Note: The box covers the oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of loading platform - Sliding plug-in rail for ALU drive-on ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area bevel - Lift axle on the front axle with control by TEBS-E in accordance with current axle load and loading condition - Four warning panels, approx. 400 mm extendable, size approx. 423 x 423 mm, equipped with position lamps - Bracket for revolving beacon on the warning panels - Wireless remote for rear steering, in addition to cable remote, with indicator lights on the receiver for axle alignment monitoring - Painted sand coating on the checker plate sections of the gooseneck and platform as anti-slip protection - 80 km/h speed limit sticker at rear and on both sides - Load gauge for determining axle loads, including load diagram

Koşul: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt of the equipment. Complete equipment list available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden planks * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring. Axle: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake system: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 Volt LED lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel construction automatically blast-cleaned by shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Coating structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included) * Electro-hydraulic unit * 4 wheel chocks with holders at the front wall * 2 inch king pin * At the galvanized connection rail in front, yellow-red air couplings * Mountings for warning boards left and right on neck and rear, including socket * 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform Djdpjw Tpr Iefx Akyskn * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside * Climbing ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l

Koşul: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Loading Platform: - Extendable loading platform with rear bevel approx. 500 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 4 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) Djdpfx Aev Hr Axekyjkn - 1 intermediate table 250 mm - Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, checker plate over the axles Axles and Tyres: - BPW axles, hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tool kit - Tyres: 235/75 R17.5 Braking System: - Braking system compliant with EU regulations, EBS-E (4S3M) Included Accessories: - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring - Recess at rear of gooseneck to accommodate ALU loading ramps - Galvanized, extendable widening by approx. 230 mm per side - European reflector panels (red-yellow) at the rear of the trailer - White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear - Holders for warning signs on both the gooseneck and rear plate, including sockets left and right - Galvanized folding supports under the rear bevel of the loading platform - Mounting bracket for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container - 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform - Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle - Lift axle on the front axle with control via TEBS E according to current axle load and loading condition - Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - Beacon bracket on the warning signs - Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring - Painted sand layer on checker plate above king pin and loading platform for slip resistance - 80 km/h speed sticker at the rear - Load gauge for determining axle loads including load chart

Koşul: ikinci el, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Extendable loading platform with rear bevel of approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-piece steel ramps: - One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning - Maximum load per pair: 40,000 kg Accessories included: - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised connection strip at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power pack - Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles - Mounting provision at rear of gooseneck for ALU approach ramps - European reflective signs (red-yellow) at rear of trailer - White reflective tape according to EU regulations at the sides, at the extension, and red at the rear - On the gooseneck and ramps, left and right, a bracket for warning signs including socket - One mount for a revolving beacon at the rear of the trailer - Galvanised folding supports under the platform’s rear slope - Control valves for the ramps mounted on the right side of the trailer - Cover plates to bridge the gap between ramps and platform - Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanised stub posts are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap - 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container - 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Galvanised platform extensions, extendable approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope - Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition Dkodpfx Aksyffd Doyon - Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light - Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring - Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform - 80 km/h speed stickers at the rear and on both sides

Koşul: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of foldable lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Dkodoxbmplopfx Akyon Compact front chassis: * Hook mounting front and rear, length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear chassis: * Mechanical bolt-eye coupling for mounting a low bed at the front * Rear end cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: * 8 x (M+S) 285/70 R19.5 as per manufacturer specification * Rear chassis tyres: * 16 x (M+S) 285/70 R19.5 as per manufacturer specification * Load index 150/148J Paintwork: * Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch king pin * Truck hydraulic connection with flow control (20 l/min) * Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works * BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-connection hydraulic couplers on the gooseneck * Front chassis with separate air connection for pneumatic tools * BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right at the rear of the front chassis for warning panels * Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2 * Socket on the rear chassis for the cable remote control of the rear steering * Rear chassis with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right * 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery * Remote control: * Operation of the powerpack, engine start/stop * Operation of the rear steering, in addition to the cable remot

Koşul: ikinci el, boş ağırlık: 11.900 kg, azami yük ağırlığı: 39.060 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear gooseneck in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable Load Floor: - Extendable load floor - 5 pairs of swivel-out lashing rings (LC 5,000 daN) - 3 pairs of swivel-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the load floor (LC 10,000 daN) - Cutouts in the external frame of the load floor for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate over the axle area Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment - Maximum load per pair: 40,000 kg Djdsxwnfmjpfx Akyekn Axles and Tyres: - BPW axles, two rigid axles, two steering axles - Air suspension, drum brakes, with lift/lower function - The self-steering axles feature an electro-magnetic reverse lock, activated automatically when reversing or manually - Axle tools - Tyres: 205/65 R17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with mount in front of front wall - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the inclined section of the loading area - A mounting bracket for beacon at the rear of the semi-trailer - Galvanized extendable extensions, approx. 230 mm per side - White reflective tape on side in compliance with EU regulations, extension and rear red - One bracket per side at gooseneck and rear panel for warning boards, including socket - One mudguard at the rear of the semi-trailer - European reflector plates (red-yellow) at rear - ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm, plug-in design - The rear galvanized insert stakes are removable. Total body length approx. 2,560 mm - 7 pairs WADER container pockets: - 1x 20ft container on the load floor - 1x 40ft container on the load floor - 1x 40ft container above the gooseneck - 2x 20ft containers - Support stand with 1 pair WADER container pockets (king pin load approx. 20,000 kg) - 7 pairs of stake pockets for insert stakes 100 x 50 mm in outer frame of load area - Lift axle on front axle with control via TEBS E depending on current axle load and loading condition - Sliding mounting rail for ALU approach ramps at the rear of the vehicle - Sanded, painted non-slip coating applied to checker plates on the gooseneck and load floor - Four extendable warning boards (approx. 400 mm extension) approx. 423 x 423 mm with position lamp - Bracket for beacon on the warning boards - 80 km/h speed stickers on rear and both sides - Load gauge for axle load determination including load chart

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WEB TRAILER PRSH 27 FLATBED with hardwood floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height 1,280 mm with fifth wheel height of 1,150 mm Spring center approx. 1,300 mm Maximum kingpin load approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal members and through-inserted cross members Outer frame height approx. 125 mm, 4 mm groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, each rated 5t! Landing gear: 24t telescopic landing gear by branded manufacturer (Jost/SAF) Axles: Branded axles (SAF/BPW/JOST) 9t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: Dksdpfsg Dkx Eox Akysn EBS brake system by Knorr or Wabco Air lines with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tanks 2 x approx. 80L Tire pressure monitoring Lighting: LED 15-pin front connection Flashing side marker lights Tires: Premium 385/65 R 22.5 tires on steel rims Superstructure: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof hardwood floor, 28 mm, alternately with galvanized omega steel profiles Hardwood boards screwed onto cross members (optional double screws) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium large contoured rear lamp panel Rear underride protection, welded (rectangular tube) Foldable and retractable rear right access ladder with platform Two wheel chocks with holders, plastic or galvanized Plastic fenders 180° over each axle Side underrun protection both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350 Other colors available at additional cost (subject to powder availability) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show optional extras. Get free, no-obligation advice and a personalized quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Errors and prior sale excepted!!!

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, ilk tescil: 06/2017, toplam uzunluk: 7.000 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve donanımlar = - 2 aks - Havalı süspansiyon = Diğer bilgiler = Aks konfigürasyonu Lastik ebatları: 235/70 R17.5 Lastik diş derinliği: %75 Frenler: kampana frenler Djdsy D Hl Iopfx Akyskn Arka aks 1: çift teker; Maks. aks yükü: 10.500 kg Arka aks 2: çift teker; Maks. aks yükü: 10.500 kg Ağırlıklar Azami toplam ağırlık: 21.000 kg Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Hasar: yok Kimlik Plaka: QALO590

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.500 kg, azami yük ağırlığı: 44.500 kg, toplam ağırlık: 54.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 12.950 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 980 mm, toplam uzunluk: 13.550 mm, toplam yükseklik: 3.585 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, lastik durumu: 100 yüzde, dingil mesafesi: 1.360 mm, azami hız: 100 km/s, renk: gri-siyah, Üretim yılı: 2026, 3-axle low-bed semi-trailer | Lift axle | Hydraulic ramps | Extendable | 5-year paintwork warranty | Options such as galvanization available Robust and professional 3-axle low-bed semi-trailer in heavy-duty design, ideal for transporting construction machinery, agricultural equipment, and heavy vehicles. Thanks to the laterally extendable loading platform and the hydraulically adjustable ramps, flexible and rapid loading of a wide range of machines is possible. Djdpfx Akeyzzqgeyjkn Technical data: Total length: 13,550 mm Width: 2,550 mm, laterally extendable: +250 mm per side Total width extended: 3,050 mm Loading platform length: 9,000 mm + 3,950 mm Platform height: 980 mm Gross weight: 54,000 kg Features: 3 TRAX axles with air suspension, each rated for 12 tonnes 1st axle liftable WABCO EBS braking system ADR-certified Aspöck / SABA LED electrical system Hydraulic rear ramps, laterally shiftable Hydraulics with remote control Additional manual control Hydraulic rear supports + mechanical drop supports 55 mm DABEMA hardwood floor Reinforced steel / chequer plate areas Galvanised lashing points Robust S355J2 heavy-duty chassis Delivery time (if not in stock) approx. 12 weeks from order Subject to price changes, technical modifications and prior sale. The images shown are for illustration purposes and may contain special equipment or optional features.

Koşul: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Dkodpjg Sk T Defx Akyen Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Koşul: yeni, azami yük ağırlığı: 36.245 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete vehicle inventory—including vehicles available immediately or on short notice—can be found on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Loading area with hardwood floor and rear chamfer approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the external frame of the loading area for attaching tension belts (LC 2,000 daN) Landing legs: Dodpfx Aoyvnfajkyokn * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data. Brake system: * Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel structure: * Steel construction made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a blast wheel machine after welding, with a second shot-blasting using corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final painting with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint finish tested in salt spray test as per ISO 9227-NSS * Cavities sealed with special wax Including the following additional equipment: * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holders * 2-inch kingpin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the platform, right side in the direction of travel * Galvanized folding supports under the chamfered loading area * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Non-slip painted sand coating on the central frame member * 1 INOX toolbox transversely under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform for accommodating 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm * Rack for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Mount for aluminum drive-on ramps, transversely under the platform behind the axles * 1 beacon light supplied l