Kullanılmış Faymonville Max Trailer Max100 4A 8.60 U satın al (50.608)

Koşul: yeni, Üretim yılı: 2026, GVN Treyler 4 Dingilli Özel Lowbed Dedjqxbfmepfx Afvouu Daha fazla bilgi için lütfen bizimle iletişime geçiniz.

Koşul: ikinci el, azami yük ağırlığı: 49.900 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2020, bir sonraki muayene (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single telescopic loading platform, wheel recess, with rear bevel and drive-on ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - Robust all-steel welded construction - Designated loading platform 3,900 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) - Ball-race turntable-mounted fifth-wheel plate with replaceable 2" kingpin and adjustable steering wedge - Mechanical landing gear at the front Loading Platform - Single telescopic, constructed as external/internal tube design with fixed 300 mm front platform section - 300 mm sliding table, adjustable and lockable on the inner tube - Extension stage locking with spring-loaded cylinders and conical bolts - 1 pair of wheel recesses after the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis - 1st axle liftable, steerable ahead - SAF axle assembly, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift/lower valve for lowering to min. 805 mm or raising to max. 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess after gooseneck 410 mm deep - Wheel recess after the 1st axle 410 mm deep Rear of Vehicle - Design "Bevelled 500 mm" - Short overhang 1,240 mm from center of the last axle - Hydraulic rear support Drive-on Ramps - 2-piece ramps with lengths 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - Dual-line full air braking system for all axles, with diaphragm brake chambers - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Park brake via spring-loaded cylinders - Anti-lock braking system (ABV brake) Special Equipment - Wheel recess - Excavator boom recess Duedpfx Afey Iq Tdjveu - Extendable widenings - Central lubrication system "BekaMax" - Electro-hydraulic unit with radio remote control Technical data Gooseneck Platform (LxW): 3,900 x 2,480 mm 1,000 mm slope for milling machine Fifth wheel height laden: 1,250 mm Loading Platform Platform (LxW): 8,800 x 2,550 mm Telescopic extension up to 2,800 mm Stepwise extendable to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable, steered ahead 2nd-4th axles hydromechanically forced-steered (dual-circuit steering) Radio remote control Electro-hydraulic unit

Koşul: ikinci el, boş ağırlık: 9.600 kg, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2011, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 205/65R17.5, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lift/lower function, 3rd and 4th axles with self-steering, ABS (anti-lock braking system), extendable, lashing eyes, loading ramps attachable, front and rear supports, side aluminum underrun protection, storage box. Body: 4-axle low-loader trailer with attachable loading ramps, SAF axles, 3rd and 4th axles with self-steering, 13 pairs of lashing rings, 10 pairs of preparations for insertable stakes, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm low-bed height, low-bed length retracted approx. 9,500 mm, TÜV (MOT) due, aluminum ramps available at an extra charge of EUR 1,500. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale and errors excepted. Dodexxkqzspfx Afveuu

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm Dedpfsxtc Uhex Afvjuu * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: ikinci el, toplam ağırlık: 40.000 kg, ilk tescil: 01/2012, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretici: Faymonville Tip: Euromax STZ-3AUB Üretim yılı: 2012 Ürün türü: İkinci el Veriler: İlk tescil: 2012 Toplam boyutlar UxGxY: 13,50 x 2,55 x 4,00 m Azami yüklü ağırlık: 40.000 kg Boş ağırlık: 10.000 kg Konum: Essen Dodoy H T Diepfx Afveuu Hemen teslim

Koşul: ikinci el, azami yük ağırlığı: 27.300 kg, toplam ağırlık: 40.000 kg, ilk tescil: 02/2012, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Üretici: Faymonville Tip: Euromax GTZ-3AUB Üretim yılı: 2012 Ürün tipi: İkinci el Bilgiler: İlk tescil: 02/2012 Toplam boyutlar UxGxY: 13,35 x 2,55 x 3,70 m Boş ağırlık: 12.700 kg Azami toplam ağırlık: 40.000 kg Yük kapasitesi: 27.300 kg Dingil sayısı: 3 Özellikler: 3 m uzatılabilir (toplam 16,35 m), zorunlu yönlendirmeli trailing axle (arka dingil), kuğu boyunu için hidrolik yükseltilebilir yatak Konum: Essen Duedpfx Ajy H T Dpefveu Hemen teslim

Koşul: ikinci el, toplam ağırlık: 42.000 kg, ilk tescil: 06/2013, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretici: Faymonville Tip: Euromax Üretim Yılı: 2013 Ürün Türü: İkinci El Veriler: İlk tescil: 13.06.2013 Toplam Ölçüler UxGxY: 13,50 x 2,55 x 4 m Azami toplam ağırlık: 42.000 kg Boş ağırlık: 10.900 kg Konum: 45143 Essen Dodpfxoyr Uyze Afvjuu Hemen teslim

Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar * Teker havuzları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg Duedpfx Aowta Alofveu -----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır. WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir * Takip kontroll aksı * Hidrolik yükleme rampaları * Havalı süspansiyon -----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır Dodpfx Aex I Uyhsfveuu WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: ikinci el, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2021, toplam genişlik: 3.000 mm, toplam yükseklik: 3.760 mm, Donanım: ABS, * Own hydraulic unit * Hydraulically movable loading ramps * 4 hydraulic auxiliary supports * Hydraulically extendable low-bed (3000 mm) * Extendable loading platform (500 mm) * AXION radio system with remote control * Gooseneck with side walls & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E * SAF axles with drum brakes * Wabco SmartBoard unit * Height-adjustable low-bed * Reversing camera * Telematics ----The following work was carried out by ES-GE Nutzfahrzeuge in February: * Brake drums, brake shoes & linings, brake cams, bushings & slack adjusters renewed on all 4 axles * Tie rod ends replaced * Suspension of the steering knuckles on TwinAxle II replaced * Electrical lighting system serviced * Hydraulic accumulator replaced * EBS repaired * Electric pump checked * High-pressure oil and filter replaced * Checked axle play * Central lubrication system checked * Suspension levers serviced Djdpfx Aozbw N Refvsuu * Sensors for height adjustment serviced * Distribution box at the front serviced * Wooden floor repaired * Protective covers repaired * Air reservoir newly fastened * Wheel bearings checked ----* Tire size: 245/70R17.5 * Gross vehicle weight: 73,000 kg * Unladen weight: 14,600 kg * Total length: 13,200 - 16,200 mm * Total width: 2,540 - 3,000 mm * Mileage: 194,000 km * Next SP inspection due: 09.2026 ----Vehicle number: 12154----Subject to errors and prior sale----Advertising and various lettering digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- YOUR VTS TEAM

Koşul: ikinci el, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2025, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Gooseneck: Djdpfszauvrjx Afvouu - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6x4 or 8x4 2-Axle Front Bogie: - Hook coupling front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and with pin-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance of 150 mm 4-Axle Rear Bogie: - Mechanical pin-eye coupling for attaching a low bed at the front, end cross-member at rear - Chassis length x chassis width approx. 5,480 mm x 2,850 mm Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and quick connector to secure in the raised position - Axles top-coated with 2 layers of 2-component paint in single color MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle levelling - Tyres 285/70 R19.5 Remote Steering: - Remote steering from the front and rear via cable remote control with pushbuttons, with single-track control of the axles - Socket for operating the remote steering on the gooseneck - Cable remote control with pushbuttons, includes single-track control of axles Accessories included: - Galvanized connection strip at the front with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right rear on the gooseneck for warning board - Spare wheel hoist with winch at the front side of the gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including hanger for supply lines; tractor unit tank must be at least 80 liters and come with coupling fittings - Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and in area of lowbed hook coupling - 2 spare wheels - Front bogie with separate air connection for air tools - Foldable steel loading width extensions, adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel inserts are placeable in 2 positions for a lowered loading area - Steel inserts with rubber flooring approx. 12 mm thick - Option to screw in rings (⌀ 40 mm) every approx. 500 mm on the outer upper flange of the excavator deck for lashing rings - 2 INOX toolboxes approx. 855 x 340 x 390 mm left and right on the gooseneck - Radio remote control for rear steering in addition to cable remote - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery - Steel inserts adjustable from 2,850 mm to 3,250 mm wide and insertable in 2 positions for a lowered loading area - 4 pairs of steel inserts with rubber flooring approx. 12 mm thick - Maximum 3,500 mm telescopic tube coverable, in 500 mm increments - Central beam of the lowbed provided with a painted sand covering as anti-slip protection - Extensive lashing points

Koşul: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included Duedeyvnd Njpfx Afveu * 1st axle with automatic lift axle function and start-up a...

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list. Duedpfxjy Auhhs Afvju Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer * 2-inch king pin * Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish * One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration) LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering * 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually * 1st axle with traction help * Technical axle load: 12,000 kg each * Air suspension with lift-lower valve HYDRAULIC LOADING RAMPS: * 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently * Flashing lights on outer side of ramp tips, switch located next to ramp controls * Transport lock for ramps using quick-lock mechanism * On-outline sand coating finish on ramp outer frame and ramp tips * Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks * Control valves for hydraulic ramps located on the right side of the vehicle BRAKING SYSTEM: WABCO EBS-E braking system, meets current EU requirements SURFACE PROTECTION: * HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims in silver grey * Side panels: natural aluminum * Wheel hubs per axle manufacturer * Lamp panel in pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame * Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage * Behind front wall: approx. 12 mm thick DELIGNIT board bolted on * Two additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, izin verilen aks yükü (aks 3): 10.500 kg, lastik boyutu: 235/75R17,5, renk: mavi, Üretim yılı: 2005, = Further Options and Accessories = - Air suspension - Central lubrication = Notes = The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations issued by Heinhuis, as well as to all agreements concluded by Heinhuis and the negotiations leading up to them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Year of manufacture: 2005 Axle Configuration Tyre size: 235/75R17.5 Axle make: BPW Rear axle 1: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 2: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 3: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 4: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Weights Unladen weight: 15,000 kg Payload: 45,000 kg Djdpfoy I Tu Dox Afvouu Gross vehicle weight: 60,000 kg Condition Technical condition: good Visual condition: good = Company Information = For more information: WhatsApp:

Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin Dusdpfx Afoy Auh Ijvou * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Koşul: ikinci el, renk: mavi, Üretim yılı: 2022, Faymonville Maxtrailer F-S42-2GXX. Baujahr: 2022 12-t-Pendel-X-Achsen Eigengewicht: 12.917 kg Nutzlast: 34.083 kg Zulässiges Gesamtgewicht: 47.000 kg Sattellast: 23.000 kg Hydraulisch abnehmbarer Schwanenhals Alu-Bordwände + Werkzeugkasten am Schwanenhals Reserverad Hydraulikanschluss (NATO) vom Zugfahrzeug 5,5 Meter ausziehbar 2 x 25 cm verbreiterbar Funkfernbedienung Hydropneumatische Federung Baggerbrücke 2600x700 mm Verzinkt Abmessungen: Schwanenhals: L: 3.700 mm B: 2.450 mm H: 1.450 mm Sattelhöhe: 1.150 mm Ladefläche: L: 6.850 mm B: 2.550 mm H: 350 mm Bodenstärke: 200 mm Heck Trailer: L: 2.600 mm B: 2.550 mm Dusdpfey A Edaex Afvsu H: 1.000 mm Bereifung: 245/70R17,5 90% Wie neu! ID NR: 509 Die Allgemeinen Geschäftsbedingungen der Heinhuis gelten für alle Anzeigen, Angebote und Offerten von Heinhuis, alle von Heinhuis abgeschlossenen Verträge und die diesen vorausgehenden Verhandlungen. Mit jeder Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 12.917 kg Zuladung: 34.083 kg zGG: 47.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für mehr Informationen: WhatsApp:

Koşul: ikinci el, Üretim yılı: 2018, Faymonville Maxtrailer F-S43-1AAF. Yıl: 2018. 9 ton SAF akslar. Boş ağırlık: 9.961 kg. Azami ağırlık: 45.000 kg. Dusdpfx Afey Ay R Ijvsu König pimi yükü: 18.000 kg. Güç destekli direksiyon, 3 yönlendirilebilir aks. 7,5 metre uzatılabilir. Havalı süspansiyon. Paslanmaz çelik alet kutuları. Radyo uzaktan kumanda. 1. aks kaldırılabilir aks. EBA, ABS, ALB. Zemin ölçüleri: U: 13.550 mm. G: 2.480 mm. Y: 1.400 mm. Y (Alüminyum yan panolar): 600 mm. Lastikler: 385/65R22,5 %70. ID NR: 513. Heinhuis’in genel hüküm ve koşulları, Heinhuis’in tüm ilan, teklif ve fiyatlandırmalarında, yapılan tüm sözleşmelerde ve bunları önceleyen müzakerelerde geçerlidir. Cevabınızın herhangi bir biçimiyle, Heinhuis genel hüküm ve koşullarının geçerliliğini kabul ettiğinizi ve bu hükümleri okuduğunuzu beyan etmiş olursunuz. Fiyatlarımız ihracat net fiyatlardır. = Daha fazla bilgi = Üretim yılı: 2018 Boş ağırlık: 9.961 kg Yük kapasitesi: 35.039 kg Azami toplam ağırlık: 45.000 kg Uzatılabilir yapı: Evet = Şirket Bilgileri = Daha fazla bilgi için: WhatsApp:

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2021, Faymonville Maxtrailer F-S43-1AAF Year of manufacture: 2021 10.5 ton BPW axles Own weight: 9,446 kg Gross weight: 49,500 kg Kingpin load: 18,000 kg Air suspension Toolbox on gooseneck Duodpfsy Ayy Nex Afvsu 3rd axle is a steering axle (trailing axle) Excavator trough Wheel recesses (50 cm) Mechanical ramps (length: 2,450 mm) Dimensions: Neck: Length: 3,450 mm Width: 2,550 mm Height: 1,400 mm Kingpin height: 1,200 mm Loading floor: Length: 9,300 mm Width: 2,550 mm Height: 900 mm Tyres: 235/75R17.5, 50% tread remaining German trailer! ID No.: 678 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, to all agreements entered into by Heinhuis, and to any preceding negotiations. By responding in any manner, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these conditions. Our prices are net export prices. = More information = Year of manufacture: 2021 Empty weight: 9,446 kg Payload: 40,054 kg Gross vehicle weight: 49,500 kg = Company information = For more information: WhatsApp:

Koşul: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). Dsdpfx Afog Sk Tvovouu 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh

Koşul: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics Dodpsrvw U Sofx Afvsuu • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 8.000 kg, izin verilen aks yükü (aks 3): 8.000 kg, ilk tescil: 11/2017, toplam uzunluk: 135.000 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 780 mm, renk: siyah, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Havalı süspansiyon = Diğer bilgiler = Aks konfigürasyonu Arka aks 1: Maks. aks yükü: 8.000 kg Arka aks 2: Maks. aks yükü: 8.000 kg; Yönlendirilebilir Arka aks 3: Maks. aks yükü: 8.000 kg; Yönlendirilebilir Arka aks 4: Maks. aks yükü: 8.000 kg; Yönlendirilebilir Ağırlıklar Boş ağırlık: 14.800 kg Yük kapasitesi: 42.200 kg Duedpfx Asyx Hwysfvsu Azami toplam ağırlık: 57.000 kg Durum Teknik durumu: iyi Görsel durumu: iyi Hasar: yok Finansal bilgiler Fiyat: Talep üzerine Ek bilgi Daha fazla bilgi için David F Middelman ile iletişime geçiniz.

Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit Dsdpfxoxarmaj Afvjuu * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Duedpoyhkqusfx Afvsu Excerpt from the equipment. Full equipment list available upon request. Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement * 2-inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs * On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish LOADING AREA: * Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F) * Mechanical landing legs with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area * Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps * 1 spare wheel mounting bracket under loading area on right side in front of axles * Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN) * 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area * Control valves for hydraulic ramps located on the right side of the vehicle * 1 pair of foldable mechanical rear supports with single-handed operation HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Duedpfjrgzv Nox Afvou * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Koşul: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Gooseneck * Gooseneck in SNT design for optimized deck length * Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Tanker deck * Low bed designed as extendable tanker deck in SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are protected in extendable beams and automatically adjust to the respective low bed length Rear running gear * In short version with closed outer frame and checker plate cover * Running gear with excavator trough, this is closed in the rear section to house air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Braking system * Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit Paintwork * 6-coat treatment * Complete steel structure shot-blasted after welding * 1 layer zinc-based primer * 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax Djdpfov Sw E Aex Afvsuu Trailer color * RAL 3002 Carmine Red * Rim color: Silver-grey * Sidewall color: Natural Aluminum Accessories included * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading area, provisions for removable load floor * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN) * Cutouts in the upper chord of the outer beams above the lashing rings * Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers * Outer beams of the low bed coated with anti-slip sand layer * 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Chamfered front and rear a