Kullanılmış Müller-Mitteltal Ka-Ta-R 18.0 satın al (55.606)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
Godpfepk D D Uex Agvoiu
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Ara
Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations
----Drawbar / Flange Drawbar Eye:
* Drawbar with positive-locking height adjustment
* 50 mm flange drawbar eye
----Electrics / Lighting:
* 15-pin 24 V connector
* LED rear lights 12/24 V mounted in underride guard
----General Attachments:
* Landing leg at the front
* External folding supports at the rear
* Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
----Tipping Body:
* Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder
* Fixed front wall made from smooth steel sheet
* Hardwood board for excavator bucket, bolted to front wall
* Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking
* Screw-on rear stanchions
* Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors
* 4 mm steel floor
* Two-step access on front left
* Mounting rail at rear for loading ramps
----Load Securing:
* One 7-tonne lashing ring in each corner
* Four 3-tonne lashing points recessed per side into the outer frame
----Loading Ramps:
* Receiving chamber for loading ramps recessed in chassis at the rear
Godpfxevin T Ss Agvsiu
* One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles
----Paintwork:
* Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized
* Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion
* Axles, air tanks, flange drawbar eye, and front landing leg painted in black
----Information:
* -- Load securing certificate in accordance with EN 12642 XL?
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 45 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar adjustable in height by approx. 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted exterior on bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks, mounted at front and rear
* Bolted smooth sheet steel bulkhead
* Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters
* Bolted, hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side)
* 1 x 6.3 t lashing ring at each front and rear corner
* Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis
----Paint / Finish:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Drop side color RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
----Information:
* New vehicle without registration
* Subject to errors and prior sale
Godpfel Tilxex Agvsiu
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
Gijdpfxspk Dv Rj Agvsu
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
Giodpfepk D Dmox Agveu
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Ara
Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
Gijdpfxol Th Dme Agvou
----Suspension:
* Parabolic springs with tandem equalizing unit
----Tow Bar / Flange Drawbar Eye:
* Height-adjustable tow bar (+/- 150 mm)
* 40 mm bolted drawbar eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-plate
----Electrics / Lighting:
* 15-pin electrical connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions
* Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands
----Loading Edge:
* Unladen loading height approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
* Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTandem Tieflader- Tiefbett, 5,5 m - durchfahrbar
Ara
Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9:
* Wabco EBS (elektronik fren sistemi)
* RDÜ (lasti̇k basinci izleme)
* Kampanalı frenler, 2 x 5,5 ton Gigant dingil
* Parabol yaylar, dengeleyici ünite ile
* Yaklaşık 300 mm yükseklik ayarlı çekme kolu
* BPW destek makarası
* Arkada mekanik düşey destekler
* Ön sağda ön panelde plastik alet kutusu
* Yan koruma çubuğu
Gjdpfewyhzvex Agvsiu
* LED aydınlatma
* 50 mm iğne yapraklı ahşap zemin
* Ön panel ve arka travers köşelerinde 1 x 6,3 ton bağlama halkası, dış şasede yanlarda 2’şer 6,3 ton UVV bağlama halkası
* Tek parça, yay mekanizmalı, tek operatörlü çelik ızgara tip rampa, yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz)
* Ön panel, yan paneller, çamurluklar ve çekme kolu sıcak daldırma galvanizli
* Dingiller, yaylar, hava tankı, ön destek makarası siyah tonlarda boyalı
* Yeni araç, tam üretici garantili
* Hatalar ve ara satış hakkı saklıdır
* Yaklaşık 35. hafta / 2026 teslim
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
Gisdpfxsxglibj Agveu
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox installed on the right front exterior of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Prepared fixture in front of the bulkhead for later installation of container locks
* Bolt-on bulkhead made from flat sheet steel
* Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist
* Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring
* Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t
----Ramps:
* One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness)
* Rear approach angle approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel
* Side panel color in RAL 9010 pure white
* Side panel painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. CW 30/2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via actuator cylinder
* Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Radio remote power supply 12+24 V via tail light
----General Attachments:
* BPW landing gear front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Drop-in-pin towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell individual mudguards
* Two-step access in front of the bulkhead, left side
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side
* Enclosed side underrun protection can be used as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-tensile fine-grain steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Control of the hooklift device via remote control
* Remote control with fast function when unloading but not when loading
* Emergency stop buttons on both left and right sides
* Container saddle with 4 supports per side and 1 roller at the rear per side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves.
* Monitoring system for underrun protection to ensure it is retracted when tipping
Gisdpfex Dp Atjx Agveu
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Brakes:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* Two SAF axles
* First axle as lift axle (fully automatic)
* Lift axle ride height +30 mm via actuator cylinder
* Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12/24V
* 2 LED reversing spotlights switched with reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via rear lamp circuit
Gsdpfx Ageyfy Rroveiu
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Detachable pin towing coupling (use only with underrun protection retracted)
* Enclosed plastic half-shell single fenders
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side
* Enclosed side underrun protection usable as advertising space
----Hydraulics:
* Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023)
* Base frame made from high-tensile fine-grained steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Hooklift controlled via remote control
* Remote control with quick function for lowering, not for lifting
* Emergency stop switches, left and right
* Container supports with four pads per side and one roller at the rear on each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist in lifting the main arm
* 2 mechanical drop-down supports at the rear
* Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open.
* Monitoring system for underrun protection ensuring it is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, and front landing leg painted in black
* Palfinger hooklift painted in black/yellow
----Infos:
* Errors and prior sale excepted
* Vehicle is in very good / like-new condition
----Container: Dimensions:
* Load length: 5,500 mm
* Load width: 2,300 mm
* Load height: 1,000 mm
Infos:
* Mountings for hook systems avail...
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1 = for roll-off containers and as a low-bed trailer
----Braking system:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
----Suspension:
Gisdpfx Ajl Tq Nmjgvju
* Air suspension with lifting and lowering system as well as RTR valve
----Drawbar:
* Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* LED rear lights 12 / 24 V
* 15-pin electrical connector
----General attachments:
* Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm
* Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm
* Reflective contour marking tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with spray suppression
* Plastic rear bumper buffer
* Folding A-sign at rear
----Loading platform:
* Main frame with raised outer rails for guiding roll-off containers
* Steel floor plate with recesses for rollers in the bogie area
* Container length possible from 5,500 - 7,000 mm
* Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1
* Weld bead as anti-slip surface in the inclined running track area
* Mechanical drop-down rear supports
----Load securing:
* 1 pair 10 t UVV lashing rings at the front bulkhead support
* 3 pairs 10 t UVV lashing rings at the lateral outer frame
* On each side, 4 x 2 t lashing eyes in cloverleaf design
* 4 x 8 t recessed lashing brackets in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized
* But the drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer's warranty
* Subject to errors and prior sale
* Reference images
----Delivery time:
* Available approx. from CW 43 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye
----General Accessories:
* Jost mechanical support winch at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Body:
* Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall
* Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter)
* Rear stanchions bolted
* Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system
* Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis
----Paintwork:
* Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized
* Side walls and tailgate painted in RAL 9010 pure white
* Painting of side walls in a different RAL color available at extra charge
* Axles, springs, flange eye, air tanks, and support winch painted black
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
Gisdpfol Thyxjx Agvou
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Ara
Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Braking System:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-shield
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made from 50 mm softwood
* 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each)
* Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unladen loading edge approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
* Axles, springs, landing gear, and air reservoir painted in black
----General Information:
* The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf on the A7
Gisdpfsl Th Eyox Agvju
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
Gedpfjx Dp Agex Agvjiu
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrical / Lighting:
* Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side)
* 15-pin electrical connector
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Fittings:
* Aluminium air tank
* Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm
* Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side
* 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery)
* 30 mm phenolic plywood floor
----Cable Drum Mounts:
* 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and drum width max. 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per mount: 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for drum shaft securing
* Steel drum shaft, 76 mm diameter with centering and rotatable ends
* 2 spacer rings
* 2 polyamide centering cones
* 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in a black tone
Giodpfx Asx Nli Nsgvju
----Info:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 51 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* LED lighting
* 15-pin plug connector
----General Attachments:
* Toolbox made of galvanized sheet steel, mounted on the right side
* Bolt-on underrun protection
* Quarter mudguards made of plastic
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanized fold-down supports
----Tipper Body:
* Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior
* Hot-dip galvanized chassis
* Steel platform, 3-way tipper body
* Continuous side walls, drop-down without central stanchion, with drop-side spring assist
* Tailgate, drop-down and swinging with manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor plate
* Rear guide rail for drive-on ramps
----Load Securing:
* 1 x 5 t recessed, folding lashing ring in each corner
* 4 x 3 t recessed and folding lashing rings in the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, recessed into the chassis from the rear
----Tires:
* Tires 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted in black tone
* Drop-side paintwork in RAL 9010 pure white
Gedpfx Aev Dz N Aogvoiu
* Paint finish for side walls in any RAL color available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate in accordance with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Ara
Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring brake chambers
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm with axle lifted)
* Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads.
* Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as an infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required)
* LED lighting system 12/24 V
* Removable LED beacon at rear
----General Attachments:
* Mechanical warning sign kit for 3 m overall width
* Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side
* Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle
----Low Loader Platform:
* Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear)
* Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front
Gedexptn Dspfx Agveiu
* Rubber coating on folding frame, approach slope, and running surface of low loader platform
* Bamboo timber between longitudinal beams in front of excavator stick rest
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing rings in the front corners
* 2 x 13.4 t UVV lashing points front and rear on each side
* 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions)
* 4 stake pockets per side, each with 2 t lashing option
* 1 x 16 t UVV lashing point at rear cross member
----Widening:
* Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side)
----Excavator Stick Rest:
* Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Deck Dimensions:
* Platform over turntable: 2,600 + 390 x 2,520 mm
* Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized
* Drawbar, axles, hydraulic axle supports and air tanks painted in black
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery Time:
Available immediately*
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x SAF axles, rated for high load
* First axle configured as lift axle (fully automatic)
* Lift axle travel height +30 mm via height-adjustment cylinder
* Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flanged Eye:
* 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Power supply for remote control: 12+24 V via tail light circuit
----General Equipment:
* BPW manual landing gear at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-cut aluminium wheels
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell single wheel guards
* Double access step, front left of the bulkhead
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side
* Enclosed side underrun protection, suitable for use as advertising space
----Hydraulics:
* Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation)
* Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame constructed from high-tensile fine-grained steel
* 20,000 kg traction force
* Hook height: 1,570 mm
* Hooklift controls via radio remote
* Quick function available for discharging, not for loading
* Emergency stop button on both left and right sides
* Container mounts: each side with 4 supports plus 1 rear roller each
* Hydraulically operated rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at rear
* Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves
* Monitoring system ensuring underrun protection is retracted before tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized
* Axles, air reservoirs, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
Gedpfxsx Dp Amj Agvjiu
----Information:
* Errors and prior sale excepted
* Vehicle is in very good / as-new condition
----Container Dimensions:
* Internal length: 5,500 mm
* Internal width: 2,300 mm
* Internal height: 1,000 mm
Information:
* Mounting brackets for hook s
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Ara
Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height increases by +30 mm when lifted)
* Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads.
* Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as info tool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation)
* LED lighting system 12/24 V
* Removable LED beacon at the rear
----General Attachments:
* Mechanical warning sign package for 3 m total width
* Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side
* Front plastic mudguards and rear galvanized steel mudflaps
----Low Loader Deck:
* Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening)
* Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward
* Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform
* Bamboo wood between the longitudinal beams in front of the excavator stick recess
----Load Securing (LaSi package):
* 2 x 6.4 t lashing rings at the front corners
* 2 x 13.4 t UVV lashing points per side (front & rear corners)
* 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions)
* 4 stake pockets per side, also providing 2 t lashing capability each
* 1 x 16 t UVV lashing point on the rear traverse
----Widening:
* Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side)
----Excavator Stick Recess:
* Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Platform Dimensions:
* Load area above turntable: 2,600 + 390 x 2,520 mm
* Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope
----Paintwork:
* Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized
* Tow bar, axles, hydraulic axle supports, and air tanks painted in black
Gedpfel Tihusx Agveiu
----Notes:
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
Immediately available*
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
Gjdpfx Agjq Hg Dxevoiu
* Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General Attachments:
* Galvanized sheet steel toolbox, right side-mounted
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing leg at the front
* Rear: 2 mechanical, hot-dip galvanized folding supports
----Tipper Body:
* Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipper body
* Continuous, drop-side panels without central stanchion, folding with drop-side assist spring
* Rear tailgate can be folded down or swung with manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp mounting rail
----Load Securing:
* Each corner with 1 x 5 t recessed and foldable lashing ring
* Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, integrated into the chassis at the rear
----Tyres:
* Tyres: 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Side panels painted in RAL 9010 pure white
* Painting of the side panels in an RAL color of your choice available at extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ Tire Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Manual landing gear at the front
Gedpfeq Euagox Agvjiu
* Two mechanical folding supports at the rear
* Plastic toolbox, right-hand side
* Two-step entry at the front left (in direction of travel)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead
* Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking)
* 4 mm steel bed
* Rear ramp mounting rail
----Load Securing:
* One lashing point (5 t) in each corner
* Four lashing rings (3 t each) recessed on each side into the outer frame
----Ramps:
* One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tank, flange eye and landing gear painted in black
* Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. calendar week 28 / 2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange drawbar eye:
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
Gijdpfx Agoxglh Rjvsu
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1: For hook lift containers and as a low-loader trailer
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 ton axles
----Suspension:
* Air suspension with lifting/lowering system and RTR valve
Gjdpfx Asl Tpc Asgvsiu
----Drawbar:
* Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* LED rear lights, 12 / 24 V
* 15-pin power plug
----General Attachments:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm
* Reflective contour tape on sides & rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Plastic rear impact buffers
* Folding A-board at the rear
----Loading Platform:
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container lengths from 5,500 – 7,000 mm possible
* Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1
* Weld seam as non-slip coating in the ramp area
* Mechanical falling supports at rear
----Load Securing:
* 1 pair 10 t UVV lashing rings at the front wall carrier
* 3 pairs of 10 t UVV lashing rings on the sides in the outer frame
* 4 x 2 t cloverleaf-type lashing eyes per side
* 4 x 8 t lashing brackets set into the outer frame
----Ramps:
* 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear supports hot-dip galvanized
* Drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 43 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
Gedpfx Aol Thw Ijgvsiu
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General fittings:
* Support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fixture in front of bulkhead for subsequent installation of container locks
* 400 mm bolt-on smooth steel front bulkhead
* Bolt-on rear stanchions
* Drop sides with spring assist
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes in front and rear crossmember for 1.2 t lashing option
* Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min)
Gsdorwc R Aopfx Agveiu
----Paintwork:
* Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized
* Axles, springs, air tank, front support winch, and flange towing eye painted black
* Drop sides painted in RAL 9010 pure white
* Side walls painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery time:
* Immediately available from Egestorf
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal ka-ta-r 18.0"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.


























































































































































































































































































































































































































































































































































