Kullanılmış Stihl Rmi 522 C satın al (39.857)

Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering function featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads) * SmartBoard control unit as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation * Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height) * Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis * Mechanically adjustable warning signage package front and rear * Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on slope * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor Gsdpfx Aer Dpz Asqtsbn * 400 mm steel front wall, slotted in * Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets * One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side * Various drill holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı Gbedpfswyhzpex Aqton * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) Gbedpfxjw Ndr Ue Aqton * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized Gsdpfx Aex Ipbmeqtjbn ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps Gjdpfx Aqsykx I Hjtebn * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: Gbsdpfx Asykx I Tsqten * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye Gbodex Nlkgopfx Aqtsn ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Durum: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0 * Suitable for 2x 12 m³ containers/skips * Lowerable pneumatic drawbar for front loading * Adjustable stop point for container mounting * Manual lashing with ratchets * Sealed floor * BPW axles * Leaf suspension * Galvanised frame/chassis * Drum brakes * Wear plates * Additional auxiliary lights * 7 lashing rings per side, mounted externally * Large toolbox * Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg * German vehicle with German documentation! * 1st owner! * First registration: 21.10.2014 * Vehicle inspection (TÜV) valid until 03/2027 * Safety inspection (SP) valid until 09/2026 * VIN: WMM00000E0058208 Gbsdszbbbdepfx Aqtsn Subject to prior sale, errors, and changes! Some company logos have been removed from the images – please ask if needed! No guarantee for the functionality of extra features! Your contact: Christoph Ott Tel. & WhatsApp:

Durum: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi ? alçaktan bağlı ? 50 mm çekme halkası ? konteyner kilidi ? her iki tarafta 12 bağlama halkası ? geri görüş kamerası ? kampana fren ? duomatic bağlantı ? ABS ? havalı süspansiyon ? alet kutusu ? EBS Gedpfoxb Ig Ssx Aqtsbn ? destek ayakları ? ikiz lastik ? BPW akslar Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.

Durum: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? Galvanizli şasi ? Alçak bağlantı ? 50 mm çeki halkası ? Konteyner kilitleme ? Her iki tarafta 12 sabitleme halkası ? Geri görüş kamerası Gjdpfx Aqoxb Iglstsbn ? Kampana fren ? Duomatic bağlantı ? ABS ? Havalı süspansiyon ? Takım sandığı ? EBS ? Destek ayakları ? İkiz tekerlekler ? BPW akslar Tüm bilgiler taahhütsüzdür / Ara satışa tabidir.

Durum: ikinci el, azami yük ağırlığı: 9.050 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2014, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.900 kg Boş ağırlık: 2.850 kg Yük kapasitesi: 9.050 kg Toplam uzunluk: 7.400 mm Gbjdpfxozc Dnvs Aqten Yükleme uzunluğu: yaklaşık 5.500 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.430 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - Çeki oku yükseklik ayarlı - Ön destek ayağı yükseklik ayarlı - 800 mm yan ve arka kapak katlanabilir - Bölünmüş yan paneller, Kinnegrip K20 - BPW akslar - Havalı süspansiyon - Takozlar Araç reklamla kaplanmış ve/veya yazılı olabilir.

Durum: ikinci el, Üretim yılı: 2007, çalışma saatleri: 6.544 h, güç: 85 kW (115,57 bg), motor üreticisi: Perkins, vites türü: mekanik, yakıt türü: dizel, azami hız: 40 km/s, toplam uzunluk: 4.570 mm, toplam genişlik: 2.480 mm, Ek Bilgiler: Marka: MCCORMICK Model: MC 115 4x4 Yapı: Traktör Gjdpfxjzbanco Aqtsbn Yıl: 01.2007 Çalışma saati: 6544 Şasi numarası (VIN): ZM15AS4JJE2027346 Motor: Perkins 84,9 kW Boyutlar: U/G: 4570 mm / 2480 mm Ağırlıklar: boş/dolu: 5265 kg / 7815 kg Maksimum hız: 40 km/s = Daha fazla bilgi = Kullanım alanı: Tarım Boş ağırlık: 5.265 kg CE işareti: Evet Seri numarası: ZM15AS4JJE2027346

Durum: ikinci el, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2012, bir sonraki muayene (TÜV): 06/2028, Üretim yılı: 2012, Dahili araç numarası: G300402 Alman aracı Hemen teslim, Kaufungen - Kassel, Almanya’daki tesisimizde Gbsdpexy Ul Sefx Aqten Daha fazla bilgi: Luis Lucena Üretim yılı: 2012 Treyler boş ağırlığı: 6.530 kg Beton mikseri treyleri LIEBHERR 10 m³ Hatalar olabilir Kullanılmış aracınızı memnuniyetle takas olarak alırız. Finansman direkt olarak firmamızda mümkündür. GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Durum: ikinci el, azami yük ağırlığı: 23.900 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2007, Üretim yılı: 2007, Internal vehicle number: G400178 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Empty weight: 7,100 kg Total length: 10,800 mm Max. permissible weight: 31,000 kg Subject to errors and prior sale. We will gladly take your used vehicle in part exchange. Financing available directly through our company. Gedpozahg Dsfx Aqtobn GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Durum: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer, with pressure sensors for axle group load indication * Side underrun protection * Mechanically adjustable warning sign boards at the front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with splash protection * Foldable (hot-dip galvanized) cover for the toolbox in the turntable platform * Toolbox made from galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on right side * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Towing bar with 40 mm towing eye, height adjustable via tension spring and turnbuckle * Tire pressure monitoring system with in-cab display via EBS signal (no installation required on the truck) * Rubber lining on the folding ramps and on the left and right drive-up slope (approx. 860 mm long) * Rubber lining on longitudinal members from bulkhead to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * 4 stake pockets per side, each with 2 t lashing capacity * Load securing package consisting of: 5 pairs of UVV load rings, swiveling and retractable, loadable in all directions and recessed into the outer frame - corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the sloped rear section) * Timber support holders under loading platform in longitudinal direction * Raised roller stop in front of the bulkhead, with 1 x 6.4 t lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable ramp tip and load-holding valves * Hydraulic lateral ramp adjustment * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l to max. 140 l / min) * Hydraulic control block, splashwater protected * Dual-line hydraulic system * Platform above turntable: approx. 1,960 x 2,520 mm * Rear loading platform: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) * Loaded platform height: approx. 890 mm +/- 20 mm (air suspension adjustment) * Chassis, turntable, roller stop, folding extensions, and access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty Gbjdpfx Aoq Dyvceqtsn * Errors and prior sale reserved * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer, with pressure sensors for axle group load indication * Side underrun protection * Mechanically adjustable warning sign boards at the front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with splash protection * Foldable (hot-dip galvanized) cover for the toolbox in the turntable platform * Toolbox made from galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on right side * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Towing bar with 40 mm towing eye, height adjustable via tension spring and turnbuckle * Tire pressure monitoring system with in-cab display via EBS signal (no installation required on the truck) * Rubber lining on the folding ramps and on the left and right drive-up slope (approx. 860 mm long) * Rubber lining on longitudinal members from bulkhead to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * 4 stake pockets per side, each with 2 t lashing capacity * Load securing package consisting of: 5 pairs of UVV load rings, swiveling and retractable, loadable in all directions and recessed into the outer frame - corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the sloped rear section) * Timber support holders under loading platform in longitudinal direction * Raised roller stop in front of the bulkhead, with 1 x 6.4 t lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable ramp tip and load-holding valves * Hydraulic lateral ramp adjustment Godpfx Aetplv Neqtebn * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l to max. 140 l / min) * Hydraulic control block, splashwater protected * Dual-line hydraulic system * Platform above turntable: approx. 1,960 x 2,520 mm * Rear loading platform: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) * Loaded platform height: approx. 890 mm +/- 20 mm (air suspension adjustment) * Chassis, turntable, roller stop, folding extensions, and access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange drawbar eye: * Height-adjustable (±150 mm) hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General attachments: * Jost support winch at the front * 2 x external drop-down support legs at the rear * Enclosed single plastic mudguards * Foldable A-sign at the rear * Plastic underride guard buffer * Hot-dip galvanized impact guard with integrated chain storage box (W=370 mm x D=420 mm x H=480 mm), front left and right ----Load securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain boxes on the external frame * Balancing chain on both sides with eye and quick-shortener, special Y-version, 6.3 t ----Skip stops: * 2 removable skip stops for lateral centering of containers * Front skip stops with swiveling stop, lockable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and support winch painted in black tone Gedpfspk Dyxsx Aqtsbn ----Info: * Certified lashing force with load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin connector * LED lighting system 12/24 V * 2 additional LED reversing lights at rear (operated via reverse gear) * 1 removable LED beacon (including holder) at rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 meter warning panel sets at the front and rear * Support crank at the front * Rear external folding supports * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides * Lateral underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing eyes every 600 mm - 5 x 3 t UVV-certified lashing eyes installed on each side - * At each front and rear corner: 1 x 6.3 t lashing ring (front, directly behind the container locks in the wooden floor, and rear in the end cross member) * Various holes for 1.2 t lashing points in front and rear cross members ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Storage compartment at the rear, recessed in the chassis under the loading area ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front support crank, and flange towing eye painted in black ----Information: Gbjdpfx Aqjv D Tbketsn * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 39/2026

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * 2 x external drop-down support legs at rear * Closed plastic single mudguards * Foldable A-sign at rear * Plastic underrun bumper with protection buffers * Hot-dip galvanized bumper with integrated chain storage box, size: W = 370 mm x D = 420 mm x H = 480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning devices ----Container Stops: * 2 removable container stops for lateral centering of containers * Front container stops with pivotable stops, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air reservoirs, and landing gear painted black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty Gbjdpfxol Thyqo Aqtsn ----Delivery Time: * Available from approximately CW 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: Gbedpfxoy U A Ele Aqtjn * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Gjdpfx Ajy U A Efoqtebn Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages at the front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left & right side * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor Gbedpfx Aqsv D Tbdoten * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) at an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm – 5 x 3 t UVV lashing brackets installed per side * In the corners at the front and rear, one 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various bores in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading area, integrated in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in a shade of black ----Additional Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 39/2026

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2006, çalışma saatleri: 508 h, bir sonraki muayene (TÜV): 10/2026, mobilite: mobil, Schliesing 220 MX Chipper – Professional Wood Shredder – Excellent Condition For sale is a reliable and powerful Schliesing 220 MX chipper, which has only seen occasional use in our facility management service. The chipper has always been stored indoors, is in perfect working condition, and was recently repainted and serviced (all filters and engine oil replaced). Technical Data: - Manufacturer: Schliesing - Model: 220 MX - Year of manufacture: 2006 - Operating hours: approx. 508 h - Engine: Kubota Diesel, V1305-EU1, approx. 35 HP (25.7 kW), FAMILY 3KBXL01.3BCD - Max. branch diameter: approx. 160–180 mm - Feed rollers: approx. 240 mm wide - Discharge chute: 360° rotatable Gbjdpfoy D Dwbox Aqton Features & Condition: - Very well maintained condition - Recently serviced (new oil + filters) - Drive belt already replaced - Newly painted - Includes one set of spare blades + counter-blades - Ready for immediate use Price: - Net: €13,000 - VAT (19%): €2,470 - Gross: €15,470 An invoice with VAT shown will of course be provided. Inspection and test run are possible and expressly welcome by appointment.

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear Gjdol Th I Aepfx Aqtsbn ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency manual release for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower function and return-to-ride (RtR) valve ----Drawbar: * 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear) * Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required * 15-pin power plug * LED lighting 12 / 24 V * Removable rear LED rotating beacon Gsdpfx Aotplwieqtjbn ----General Attachments: * Side underrun protection * Swing-away supports at the rear of the chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle (FA) plastic quarter mudguards with splash protection * Rear axle (RA) straight galvanised steel skirts with splash protection * Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform) * 2 galvanised climbing steps on turntable, left and right ----Low loader platform: * Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads) ----Load Securing (Load-Securing Package includes): * 2 lashing rings (13.4 t) front left & right on bulkhead cross member * 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets per side, each with simultaneous 2 t lashing option * Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for retrofitting hydraulic ramp repositioning ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame ----Loading Height: * Loaded: approx. 910 mm +/- 20 mm with air suspension ----Paintwork: * Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf