Kullanılmış Müller-Mitteltal T 3-Profi-30 To. 3 Achser satın al (66.028)

Durumu: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty Hnsdpfx Aiotr St Uefsk * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Durumu: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer assembly ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting Hnsdpfx Aijv D Tcbjfek ----General Attachments: * Support windlass at the front * Externally mounted folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall * Side underrun protection * Plastic quarter fenders ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the front wall and rear incline for retrofitting container locks for transporting 20" containers * Bolted front wall made of smooth sheet metal * Drop-side walls made of trapezoidal-profile steel sheet, foldable, split in the middle (1x) * Steel rear wall, can be slid in and stored between the ramp mounts or in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, angled at about 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t drop-type lashing rings every 600 mm * In each corner at front and rear, 1 x 6.3 t lashing ring * Various holes in the front and end cross members for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear ramp angle approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paint Finish: * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support windlass painted in black * Sideboards painted in RAL 9010 pure white * Painting of side walls in RAL color of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex works Egestorf (A7 motorway)

Durumu: yeni, azami yük ağırlığı: 8.620 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, *KA-TA-R 11.9:* Brakes: - Electronic Braking System (EBS) - Emergency release device for spring brake cylinders - Drum brakes Axle: - 2 x 5.5 t Gigant axles Suspension: - Parabolic springs with tandem equalizer unit Drawbar / Drawbar Eye: - Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange drawbar eye Electrics / Lighting: - Tire Pressure Monitoring System (TPMS) - 15-pin electrical connector - LED tail lights General Attachments: - Jost mechanical landing gear, front - 2 mechanical hot-dip galvanized folding supports, rear - Toolbox made of galvanized sheet steel, right side - Hot-dip galvanized bolted underrun protection - Toolbox made of galvanized sheet steel, right side - Plastic quarter mudguards Tipper Platform: - Mesh hooks on the sides and rear at the central locking mounts, plus 3 on the front wall - Hot-dip galvanized chassis - Steel pallet 3-way tipper body - Continuous side walls, foldable without center stanchions, with drop side spring assist - Tailgate foldable and swingable via manual central locking - Bolted hot-dip galvanized rear stanchions - 4 mm steel floor plate - Preparation for later retrofit of side wall extensions - Platform length: 5.5 meters Load Securing: - Each corner with 1 x 5 t lashing point - Each side with 4 x 3 t lashing rings recessed in the outer frame Ramps: - Mounting rail at rear for loading ramps - 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles - Lockable storage compartment under the load platform, integrated into the chassis from the rear Wheelbase: - Wheelbase: 990 mm Hjdpfxem Angvs Aifjnk Tyres: - Tyres: 235/75R17.5 Paintwork: - Axles, springs, air tank, drawbar, and landing gear painted in black - Platform body color: RAL 9010 pure white - Painting of side walls and tipper platform in a different RAL color possible at extra cost Information: - Reinforced body with EN 12642 XL load securing certificate - New vehicle without initial registration with manufacturer’s warranty - Subject to errors and prior sale Delivery Time: - Available immediately ex stock Egestorf (A7)

Durumu: yeni, azami yük ağırlığı: 8.620 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9: ----Brakes: Hjdpfx Aiol Thx Ejfjnk * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem balance unit ----Drawbar / Flange Eye: * Hot-dip galvanized, height-adjustable drawbar (300 mm adjustment) with 40 mm flange towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General attachments: * Jost mechanical landing leg at the front * Two rear mechanical, hot-dip galvanized folding supports * Tool box made of galvanized sheet steel, mounted on the right side * Bolted hot-dip galvanized underrun guard * Plastic quarter mudguards ----Tipper body: * Mesh hooks on the sides and rear in the central locking mounts, plus three on the front wall * Hot-dip galvanized chassis * Steel pallet – 3-way tipper body * Continuous, fold-down side walls without central stanchions, fitted with drop-side spring lifts * Tailgate foldable and swinging, controlled via manual central locking * Hot-dip galvanized bolted rear stanchions * 4 mm steel floor plate * Preparation for subsequent installation of side wall extensions * 5.5-meter-long body ----Load securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * Rear ramp rails for loading ramps * 1 pair of aluminum ramps, approx. 3,310 x 400 mm (8 t capacity per pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the platform, integrated into the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Body paintwork: RAL 9010 pure white * Painting of side walls and tipper body in any other RAL colour available at extra cost ----Additional information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle without first registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf on the A7

Durumu: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system (TPMS) * Emergency release device for spring-actuated cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering device * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm by offset plate * Jost landing gear at front * External folding supports at rear * Plastic toolbox, approx. 750 x 350 x 300 mm, on right side * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped design * Preparation in front of bulkhead for retrofitting container locks Hjdpfx Aomi Tmaeifonk * Bolted front wall made of smooth panel * Split side walls made of trapezoidal-profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, can be slid in between ramps—bracket for stowage when not in use, mounted inside front wall * Rear stakes bolted * Perforated outer frame, approx. 45° bent with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Lashing package: in each corner front and rear 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in front and rear cross beam for 1.2 t lashing possibilities * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles Hedpfx Aiomi Tcqjfonk * Air suspension with lifting and lowering system * Tow bar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical socket * Multi-chamber tail lights * Reinforcement package on chassis for drill rig transport * 50 mm softwood floor in clamped version * Pre-fitted equipment for retrofitting container locks in front of bulkhead * Bolt-on bulkhead made of smooth sheet metal * Split side walls, steel sheet - trapezoidal profile - foldable with central folding stake * Rear wall, steel, slide-in type between ramps - bracket for storage in front of bulkhead when not in use * Rear stakes bolted * Perforated outer frame approx. 45° angle, with 2 t lashing capacity every 480 mm * Option to install 3 t drop-forged lashing rings every 600 mm * Load securing package (Lasi): front and rear corners each equipped with 1 x 10 t UVV lashing ring, sides each with 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in bulkhead and end crossmember for 1.2 t lashing points * One-piece slide-in ramps, 12 t / pair, ramps approx. 2,750 x 620 mm * Rear access ramp approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flange eye and landing gear painted in black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Hsdsl Thy Rspfx Aifenk * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm Hedel Tilxspfx Aifsnk * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: Hnedpfxopk D D Uo Aifjk * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durumu: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion Hnjdpfxepk D Dms Aifjk ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durumu: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit Hnjdjv Dz N Aopfx Aifek ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire monitoring system * LED lighting * 15-pin plug connector ----General Attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolt-on underrun protection * Quarter mudguards made of plastic * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanized fold-down supports ----Tipper Body: * Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, drop-down without central stanchion, with drop-side spring assist * Tailgate, drop-down and swinging with manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear guide rail for drive-on ramps ----Load Securing: * 1 x 5 t recessed, folding lashing ring in each corner * 4 x 3 t recessed and folding lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, recessed into the chassis from the rear ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Paint finish for side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate in accordance with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Galvanized sheet steel toolbox, right side-mounted * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing leg at the front * Rear: 2 mechanical, hot-dip galvanized folding supports ----Tipper Body: * Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, drop-side panels without central stanchion, folding with drop-side assist spring * Rear tailgate can be folded down or swung with manual central locking Hnodpjq Hg Dxjfx Aifek * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * Each corner with 1 x 5 t recessed and foldable lashing ring * Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, integrated into the chassis at the rear ----Tyres: * Tyres: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Side panels painted in RAL 9010 pure white * Painting of the side panels in an RAL color of your choice available at extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline ----Brake system: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ Tire pressure monitoring system * Multivoltage * 15-pin power plug * 12V 13-pin additional cable * Extended connection cables for forestry and agricultural tractors * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox on right side * Two-step entry at the front left in the direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Mesh hooks at the sides and rear in the central locking bearings and two on the front wall * Steel pallet – three-way tipper body (continuous side walls – without center posts – foldable with drop side spring lift, tailgate foldable and swinging via manual central locking) * 4 mm steel plate floor * Mounting rail at the rear for loading ramps ----Load securing: * One 5 t lashing ring in each corner * Four 3 t lashing eyes each recessed in the outer frame on each side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, integrated under the loading area in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, side walls, fold-down supports and rear stanchions hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted in black * Side walls hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors, prior sale reserved Hsdpjq Euagefx Aifjnk ----Delivery time: * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Hnedol Thw Ispfx Aifok * Parabolic springs with tandem equalization unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12V 13-pin additional cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General attachments: * Mechanical landing gear at the front * Two mechanical foldable rear supports * Plastic toolbox, right side * Two-step entry, front left in the direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Net hooks on the sides and rear in the central lock mountings, plus two on the front wall * Steel pallet – 3-way tipper body (continuous side walls, no central stanchions, fold-down with drop-side spring lifters, rear gate foldable and swinging via manual central locking) * 4 mm steel floor plate * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner * Plus 4 x 3 t lashing eyes recessed in the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment mounted under the loading area at the rear of the chassis ----Tires: * Tires 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, drop sides, foldable supports, and rear stanchions hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black * Drop sides hot-dip galvanized ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18 ----Braking System: * EBS-E (Electronic Braking System with RSS) * Emergency release device for spring brake cylinders Hodpfox Ipbyjx Aifonk * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin electrical connector * LED lighting with galvanized protective canopy ----Drawbar Eye / Drawbar: * Drawbar with 50 mm flange drawbar eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Front support winch * Foldable galvanized steel underrun protection for paver feeding * Closed single-piece plastic mudguards * Front wall platform made of grating with access step on the drawbar and grab handles on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper Body: * Steel 3-way tipper body with aluminium sidewalls, asymmetrical — continuous without center stanchion — pivoting via manual central locking, left side drop-down with side wall spring assist * Rear wall — made from HBW 400 steel — pendulum-mounted with automatic 2-claw locking system * 5 mm steel floor made of HBW 450 steel ----Load Securing: * Four 3 t lashing rings recessed and foldable per side, embedded in the steel floor ----Tarpaulin: * Roll tarp — agate grey, similar to RAL 7038 * Tarpaulin tensioned using lateral tensioning ratchets and tensioning rubbers at front and rear ----Paintwork: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air reservoir, support winch, and flange drawbar eye painted in black * Superstructure painted in RAL 9010 pure white ----Additional Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate up to 19 t * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (images may differ from the actual vehicle due to special equipment) ----Delivery time: * Vehicle available from CW 16/2026

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: Hnodsxf Skpjpfx Aifjk * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system Hnedpfsx Ipbmsx Aifek ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye Hjdpfxsxf Skvo Aifsnk ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Closed plastic mudguards, front & rear axle * Closed side underrun protection * Rear underrun guard bolted * Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear impact protection buffers ----Electrics / lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container guidance surface / tipping frame: * External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment * To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock * The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside * Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: Hodpfxjx Ipa Ae Aifonk * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking components (without top coat) * Turntable, air reservoir, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * Suitable for container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Sample images (actual vehicle photos may vary due to optional equipment) ----Delivery time: * Available from CW 24/2026

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic quarter mudguards * Plastic toolbox at the front right outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: * Loading area: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop-side panels made of trapezoidal-profiled sheet steel, foldable with sideboard spring assist * Rear wall slidably mounted between ramp brackets, when not in use stows inside in front of the bulkhead Hnodpfx Aijq Ra D Esfjk * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option for installation of 3 t foldable lashing rings every 600 mm * In each corner front and rear: 1 x 6.3 t lashing point * Various drillings in front and rear traverse for 1.2 t lashing option ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes, and drive-on ramps * Sides painted in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery Time: Available from CW (calendar week)

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Drawbar adjustable in height by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Load Area: * Load length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Front wall bolted from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with spring lifter * Rear wall made of steel, can be slid in between the ramp holders, stored in front when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, lashing force 2 t every 480 mm * Installation of foldable lashing rings with 3 t rating every 600 mm possible * In each corner front and rear: 1 x 6.3 t lashing point Hodervvfwepfx Aifjnk * Various bores in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, rear stakes, and ramps hot-dip galvanized * Drop side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ----Notes: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: Available from CW (calendar week)

Durumu: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Tool box, galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection Hedpfx Aijpk D Ncefsnk * Plastic quarter mudguards * 15-pin power connector * LED tail lights * Reinforcement package for drilling rig transport on chassis (loading height +20 mm) * 50 mm softwood flooring, clamped version * Fixture in front of bulkhead for retrofitting container locks * Bolted smooth plate steel bulkhead * Fold-down, trapezoidal-profile steel sidewalls with drop side spring assist * Removable steel tailgate insertable between ramps, holder inside front bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm * Optionally, 3 t flush lashing rings can be installed every 600 mm * In each front and rear corner: 1 x 10 t lashing point, various holes in front and end cross-members for 1.2 t tie-down possibility * One-piece mechanical grid ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, rear tailgate, rear folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Sidewalls painted in RAL 9010 pure white * Custom color for sidewalls in any RAL shade available for an extra charge * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted * Available immediately ex Egestorf

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: çelik, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick-shortener in Y-special version, 6.3 t - Tensioning force with load securing certificate - Wabco EBS - RDÜ tire pressure monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensation unit - Jost landing gear at the front - 2 x external folding supports at the rear - Height-adjustable hot-dip galvanized drawbar +/- 150 mm - Hot-dip galvanized chassis - 15-pin electrical connector - LED tail lights - Enclosed single plastic mudguards - Foldable A-panel at the rear - Plastic impact protection buffers on underrun protection - Hot-dip galvanized underrun protection with integrated chain storage box B = 370 mm x D = 420 mm x H = 480 mm, front left & right Hnjdpfxjxuhy Ee Aifjk - 2 interchangeable skip stops for centering skips laterally - Skip stops at the front with pendulum stop, insertable in 4 positions - 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements - Axles, springs, air tanks, and landing leg painted in black - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from calendar week 05 / 2026

Durumu: yeni gibi (kullanılmış), azami yük ağırlığı: 14.400 kg, toplam ağırlık: 12.080 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 285/70R19.5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2022, - ETM-TA 14.4: - Wabco ABS braking system - Emergency release mechanism for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem compensation unit - Height-adjustable drawbar (+/- 150 mm) with 40 mm screwed towing eye - Jost landing gear at the front, lateral underrun protection - Foldable A-panel at the rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel rear wall - Floor made of 50 mm softwood - 1 sliding plate pad 750 x 1,000 mm in the front area incl. 2 removable skip stops at the front, each adjustable to 2 positions - 4 interchangeable skip stops, adjustable to 2 positions each for lateral centering of the skips - 1 UVV-compliant lashing point per side (13.5 t) for attaching tensioning elements - 2 ratchet tensioners (spindle adjustment) with equalizer chain and quick shortener (tension force 6,300 kg) - Rear crossmember for mounting aluminum loading ramps incl. 2 additional drop-down supports at the rear - Unladen loading edge approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized - Axles, springs, landing gear, air tanks painted black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Unladen loading edge: approx. 710 mm - Hot-dip galvanized finish Hedjxvbcpjpfx Aifjnk - Vehicle has day registration from 06/2024, not loaded/used due to missing tire pressure monitoring system - New vehicle with manufacturer's warranty - Subject to errors and prior sale - Immediately available from Egestorf off A7

Durumu: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles Hodpfxjpk D D Ho Aifsnk * Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted laterally on the right (powder-coated in black) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis – loading height + 20 mm * 50 mm softwood floor, clamped design * Provisions in front of the bulkhead for subsequent installation of container locks * Bolted smooth sheet steel front wall * Drop-down side walls of trapezoidal profiled steel with tailgate spring assist * Steel rear panel, retractable between ramps – bracket inside ahead of front wall for storage when not in use * Bolted rear stanchions * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner: one 10 t lashing point; various holes for 1.2 t lashing options in the front and rear cross members * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, rear folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Side board coating in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge * New vehicle with manufacturer's warranty * Subject to changes and prior sale * Immediately available from Egestorf