Kullanılmış Kässbohrer 3Achs Tieflader Lenk Saf Hydr. Rampen satın al (5.688)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLVTS 400 S Luft/ Hydr. 4-Achs Tieflader -902
Ara
Durum: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400
Gross vehicle weight: 24,000 kg / 40,000 kg
Unladen weight: 8,080 kg
Payload: 15,920 kg / 31,920 kg
Overall length: 11,940 mm
Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm
Width: 2,550 mm
Loading height: 900 mm
Further information
Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net
Chassis – Low Loader Trailer
Steel welded construction
Turntable with heavy-duty ball-race ring
Folding rear supports
2 wheel chocks with holder
Aluminium side underrun protection
Full-width rear mud flap
Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle
Anti-spray flaps in front of and behind 3rd and 4th axles
Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep
2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel
1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable
Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm
Extendable width to 3,000 mm (not in rear bevel area)
(Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm)
Storage compartment for wooden planks beneath the low loader deck
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t
4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment)
9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t
- 2 at the front on the gooseneck
- 7 in the low-bed section
First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm
3 pairs of additional folding lashing eyes, each rated at 10 t
- 1 on the gooseneck (protruding)
- 1 at the beginning of the low-bed section recessed in the inner longitudinal beams
- 1 behind the last axle recessed in the floor
Towing gear for turntable trailer
Drawbar with certified 50 mm towing eye
Drawbar height adjustment via spring
Axles & suspension
Drum brake axles, manufacturer’s choice
"Axle/chassis laser alignment" reduces tyre wear and fuel consumption
Air suspension with lift & lower valve + auto-reset function
Wheels and tyres
235 / 75 R 17.5” – manufacturer’s choice
Steel twin wheels, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale)
Vehicle stability control system
2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle
12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand)
Note: The trailer may only be towed by vehicles which ensure full ABS functionality!
Electrics
Nlodpsxrx Nlsfx Aldoc
12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light
(Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting)
2 white LED position lights at the front
2 white/red LED lane departure lights at the rear
2 x 7-pin non-interchangeab
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLVTS-S 400 Tieflader Radmulden Parab/ Hydr.
Ara
Durum: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM
Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40%
Monthly rate: EUR 899.00
Vehicle / Body: Low loader
First registration: New vehicle
Gross weight: 24,000 kg / 40,000 kg
Unladen weight: 9,990 kg
Payload: 14,010 kg / 30,010 kg
Overall length: 12,000 mm
Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm
Width: 2,550 mm
Loading height: 900 mm
Further information:
Chassis: Low loader trailer
Steel welded construction
Turntable with heavy-duty ball race
Rear support foldable
Wheel chocks with holder
Aluminium side underrun protection
Full-width rear mudflap
Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle
Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep
2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel
Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim
Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm
1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area.
2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area.
Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm)
Storage compartment for timbers under the low bed deck
70 mm timbers for extension to 3,000 mm
Lashing points low loader:
1 pair of recessed ring lashing points at front of gooseneck, each 5 t
4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps)
Nlsdpfx Alstrizksdsc
8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t
2x at front on gooseneck
6x in the low bed
First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm
5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included)
1 pair of additional folding lashing points recessed in the floor, each 10 t
1x inside next to main frame at start of low bed
2 pairs of additional folding lashing points, each 10 t
1x on gooseneck (protrudes)
1x recessed in floor behind rearmost axle
Drawbar coupling for turntable trailer:
Drawbar with tested 50 mm coupling eye, coupling eye angled at 8°
D-value min. 160 kN
Axles + Suspension:
BPW drum brake axles
Laser-aligned axles/chassis; reduces tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation)
Wheels and tires:
235/75 R 17.5"
Manufacturer’s choice, with M+S marking
Steel rims in twin-wheel configuration, factory silver
Braking system:
2-line compressed air brake system
Spring-loa
Küçük ilan
Regensburg
2.150 km
Alçak şasi dorse
BROSHUISSemi Tieflader 5 Achser SAF TELESKOP - Nr.: 036
Ara
Durum: ikinci el, toplam ağırlık: 70.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/1998, Donanım: ABS, Vehicle Identification No.: XL952N5SAWL007036
Fifth wheel load: 20,000 kg – Axle loads: 5 x 10,000 kg
Unladen weight: 13,100 kg
RO HU due
Neck length: 4,100 mm
Coupling height: 1,250 mm
Low bed: Length: 9,200 mm (650 mm of which are chamfered) – Width: 2,525 mm – Loading height: 880 mm
Extendable by 6,200 mm
Widenable to 3,000 mm
Plug-in rails
Technical axle loads: 5 x 10,000 kg
SAF axles with drum brakes
Axles 1, 2 = liftable
Axles 5, 6 = self-steering
Tyres: 235/75 R 17.5
Modifications, prior sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is binding.
Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be fitted with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.
Nlsdpfsyx N Dvjx Aldoc
Küçük ilan
Koenigs-Wusterhausen
2.227 km
Alçak şasi römork
MÜLLER-MITTELTALTieflader T 4 Profi 40,0 Tiefladeranhänger hydr.
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2020, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 9.800 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS
* Rear support
* BPW ECO-Plus axles
* Amber rotating beacon
* Alloy wheels
* Duomatic air coupling
----Body: Galvanized low-loader trailer (2500+7300mm)/Loading height approx. 900mm, rear sloped/Ramp height approx. 770mm, steel/wood floor with anti-slip covering, extendable to 3 meters, hydraulic loading ramps (folded for low loading angle) with anti-slip covering, also hydraulically laterally adjustable, lashing rings
Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our terms and conditions (see imprint).
Nlodpfx Ajy T Dh Seldsc
Küçük ilan
Neumünster
2.538 km
Alçak şasi römork
MÜLLER-MITTELTALTT40 Tieflader / Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2000, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.750 mm, toplam genişlik: 2.750 mm, Müller Mitteltal TT40 Low Loader - Trailer:
----
* Manufacturer: Müller Mitteltal
* Model: TT40
* First registration: 02 / 2000
* Gross vehicle weight: 40,000 kg
* Unladen weight: 9,900 kg
* Payload: 30,100 kg
* 4-axle
* Last axle steered
* MOT / Inspection due!
* Hydraulic ramps
* Wooden planks in the low-bed section have been replaced previously
* Inspection (MOT/TÜV) due
* German registration
* Total loading area: approx. 10.60 meters
* Loading width: approx. 2.75 meters
* Low-bed length: approx. 4.50 meters
Nodpfxjzaylfj Aldelc
* Rear loading height: approx. 0.9 meters
* Low-bed loading height: approx. 0.65 meters
* Front neck loading height: approx. 1.05 meters
* Additional photos on request (WhatsApp Erik)
* Price: 12,900 Euro, net plus 19% VAT
----For further questions, please call:
Erik Kortum: WhatsApp
All information provided without guarantee or warranty. Subject to errors and prior sale.
Küçük ilan
Furth im Wald
2.116 km
Alçak şasi römork
HÜFFERMANNHPA 2072 Tieflader Abroller Rampen FullOptionNEU
Ara
Durum: yeni, azami yük ağırlığı: 14.904 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.050 mm, Üretim yılı: 2026, Donanım: ABS, HÜFFERMANN HAP 20.72 MultiCarrier FullOption arc galvanized!!!
Features:
- Gross vehicle weight (permitted): 18 t
- Gross vehicle weight (technical): 20 t
- Unladen weight approx. 5,096 t (+/- according to DIN tolerance)
Dimensions:
- Frame length approx. 7,200 mm, container internal length 6,000 - 7,000 mm plus wheeled vehicles
- Overall width max. 2,550 mm
- Container loading height (driving position) approx. 950 mm
Type HPA 2072, twin-tyre
- Welded steel frame construction made of high-strength S700 steel
- Chassis for rear loading
- Load securing with pneumatic low-tension locking, 4 claws, clamping force 2.5 t per claw, operated on the trailer, left side in direction of travel
- 1 removable roller stop as variable container stop
- Integrated lashing rail on the outer frame for bolted lashing rings
- 6 pairs of lashing holes at the front of the outer frame
- Rear approach slope with ramp compartment including steel sheet lid
- Low-maintenance, sealed ball-bearing slewing ring
- Mounting rail for aluminum drive-on ramps (WITHOUT RAMPS)
- 2 pairs 5 t lashing rings on deck, rear lashing rings recessed into the floor!
- 8 pairs of bolted 3 t lashing brackets on the outer frame, approx. equally spaced
Drawbar:
- Extendable drawbar, adjustable 6 x 100 mm, with 40 mm DIN towing eye, straight eye, D-value 125 kN, for twin-tyre running gears
- Drawbar holding spring with tensioner
- Truck coupling height from 635 mm to 835 mm
- Drawbar length 2,000-2,600 mm
BPW EcoPlus low-loader axles with drum brakes S-cam brake 300/200 mm, load capacity 10 t/axle, 17.5" Z-tires, automatic brake stroke adjusters
- 8 tires 235/75 R 17.5, 141J
- 8 steel rims 6.75 x 17.5, with offset, silver
- Black plastic wheel nut caps
Brake system according to ECE regulation R13
- Two-line pneumatic braking system
- Wabco brake system
- EBS system 4S3M, 1st and 2nd axle sensored
- Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP
Nodeyh Sl Djpfx Aldolc
- Spring-type parking brake on 2nd axle
- Aluminum air tanks
- Brake/air connection lines with Duomatic quick coupling
- EBS/ABS connection cable
- Mount for EBS and electrical connectors on the drawbar
Air suspension with lifting and lowering, can be operated separately front and rear via 2 rotary valve levers
- Automatic setting to programmed driving level above 15 km/h
- Schwarzmüller Intelligent Telematics
- Weight detection/axle load display via EBS canbus signal for display in the driver’s cab (truck must be suitably equipped, not a calibrated scale)
- Tire pressure monitoring in accordance with ECE Regulation 141, with pressure sensor in the wheels
- Acoustic reverse warning system/signal, activated via reverse gear
24-volt lighting system according to ECE Regulation R48
- Full LED multi-chamber tail lights "Aspöck EcoLED III"
- LED position lights front
- LED outline markers rear
- LED side marker lights, switched via indicator signal
- LED license plate lights
- Connection cable 1 x 15-pin
- 2 LED worklights, mounted left and right below the outer frame
- 2 LED reversing lights, mounted at the rear left and right
- 7-pin socket at the rear
Paintwork:
- Blasted, arc galvanized, primed with epoxy base, final coat with 2K top coat applied electrostatically
- Material overlaps and joints protected with cavity wax
- Chassis = RAL 9005 deep black
- Load securing elements = RAL 1003 signal yellow
- Drawbar/tow bar in driving pos...
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML
----Brakes:
* Without ABS/EBS, approved for 40 km/h
* Spring-loaded parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem balancing unit with 100 mm wide parabolic springs
----Drawbar / Draw Tube:
* Fixed welded draw tube with low-maintenance ball joint for K80 ball head coupling (adjustable +77 mm / 33 mm via front plate) with elevated tower for connection lines
----Electrics / Lighting:
* 12V 7+4 pin power supply
* LED lighting system 12/24V with protective grille
* 2 rear LED work lights switchable from the towing vehicle, no vehicle-side installation required
----General Attachments:
* Landing gear at the front
* Mechanical support legs at the rear
* Side marker lights with indicator activation
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Hot-dip galvanized two-step access ladder in front of the front wall (left side, FR)
----Chassis:
Nedpfxer Dpzuo Aldjlc
* Chassis made of high-tensile fine-grain steel
----Tipping Platform:
* Steel pallet 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls — without central posts — swinging via manual central locking and mechanically foldable with sideboard spring assisters)
* Hydraulic tailgate, 500 mm high, functions as hydraulic chute, with 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 recessed and folding 7 t lashing ring in each corner
* 4 recessed and folding 3 t lashing rings per side
----Ramps:
* 1 pair of aluminium access ramps (10 t/pair for axle distance over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles
* 2 storage compartments for aluminum loading ramps integrated at the rear of the chassis
* Load securing according to EN 12642 XL
----Coupling Height:
* Approx. 530 mm loaded & approx. 590 mm unloaded
----Paintwork:
* Superstructure painted in RAL 9010 pure white
* Chassis, draw tube, rear support legs, underrun protection hot-dip galvanized
* Axles, air reservoir, front landing gear
* K80 coupling painted in black
----Notes:
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML
----Brakes:
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem equalizer unit with 100 mm wide parabolic springs
----Drawbar/Eyelet:
* Solidly welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via the mounting plate), with raised gallows for connection lines
----Electrics / Lighting:
* 12 V 7+4-pin power supply
* LED lighting system 12 / 24 V with protective grid
* 2 LED work lights at the rear, switchable from the towing vehicle without vehicle-side installation
----General Attachments:
* Landing gear at the front
* Mechanical drop-down supports at the rear
* Side marker lights with indicator control
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, positioned on the right
* Hot-dip galvanized, two-step access ladder in front of the front wall (left side)
----Chassis:
* Chassis made of fine-grain steel
----Tipping Platform:
* Steel pallet-wide three-way tipper body with M-Strong drop sides (fixed front wall, continuous side walls – without center posts – swinging via manual central locking and mechanically foldable with drop side spring lifter
* Hydraulic tailgate, 500 mm high, serves as hydraulic chute with a 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 x 7 t recessed and foldable lashing ring in each corner
* 4 x 3 t recessed and foldable lashing eyes on each side
----Ramps:
* 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles
* 2 integrated rear ramp compartments in the chassis for aluminum loading ramps
* Load securing to EN 12642 XL standard
----Coupling Height:
* Approx. 530 mm loaded & approx. 590 mm unloaded
Nljdpfxjr Dpz He Aldjc
----Paintwork:
* Superstructure painted RAL 9010 pure white
* Chassis, drawbar, rear supports, underrun protection hot-dip galvanized
* Axles, air reservoir, front landing gear, K80 coupling painted in black tone
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Ara
Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle equalization front and rear
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* Warning sign packages front & rear
* Reflective contour tape on sides and rear
* EBS multi-voltage system for 12 & 24 V electrics
* Removable LED beacon at the rear
* 24 V - 15-pin and additionally 12 V - 7+4-pin power cable
* Extended connection lines for agricultural and forestry tractors
Njdel Th Evjpfx Aldelc
* LED lighting
* Straight drawbar with 40 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side
* Enclosed single plastic mudguards at the front
* Straight rear steel splash guards each with spray suppression
* Side underrun protection
* Extended offset cranking by 500 mm to the front
* Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed, lockable storage compartments including covers
* Chassis made of high-strength fine-grained steel
* Floor over the turntable platform made of 50 mm softwood, in the lowbed platform 60 mm softwood
* Outer planks of the access ramps made of 50 mm bamboo wood
* Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing capacity
* Lashing package consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform, each 1 pair 13.4 t lashing rings front and rear on the outer frame, and additionally 4 pairs 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed in the outer frame, 2 pairs 6.4 t lashing rings sideways at the excavator stick holder, 8 pairs galvanized folding extensions for 3 m total width (not including rear slope)
* Widening planks stored in a side locker on the left
* Excavator stick holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm
* Mechanical rear supports
* Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm
* Hydraulic side-shifting of ramps on sliding tube from ramp shaft
* Loading area above turntable: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,280 x 2,520 mm
* Loaded platform height approx. 860 mm (incl. 860 mm approach slope)
* Chassis, turntable, access ramps, mechanical folding supports at rear hot-dip galvanized
* Axles, springs, air tanks and turntable painted in black
* New vehicle with manufacturer’s warranty
* Errors and interim sale excepted
* Available immediately from Egestorf
Küçük ilan
Lübbecke
2.526 km
Makine taşıma römorku
Westfalia2-Achser Tanden Tieflader mit Rampen
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/1989, Üretim yılı: 1989, Donanım: ABS, - EBS
Daha fazla bilgi için lütfen bizimle iletişime geçin.
Nlsdpfx Aloxt Tblodoc
Küçük ilan
Legden
2.617 km
Alçak şasi römork
MÖSLEINTHT 11 Tieflader-Anhänger mit Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 9.100 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2014, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 7.204 mm, yükleme alanı genişliği: 2.484 mm, yükleme alanı yüksekliği: 594 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.500 mm, Donanım: ABS, * Drive-up ramps
* Drop sides
* Height-adjustable towing device
* Front crank support leg
Njdpfsy T Dynjx Aldslc
* Leaf spring suspension
* BPW axles with drum brakes
* Additional rear support legs
* Wheel chocks
* Side lashing points
----* Tire size: 235/75R17.5
* Technical total weight: 11,900 kg
* Unladen weight: 2,800 kg
* Overall length: 9,150 mm
* Safety inspection (SP) due: 10/2026
----Vehicle number: 12097----Subject to errors and prior sale----Advertising and various inscriptions have been digitally removed.----- We are happy to assist you with all formalities involved in the purchase of a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following additional services at extra cost:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfers Vehicle registration Recoveries and vehicle transports----
YOUR VTS TEAM
Küçük ilan
Gralla
1.820 km
Alçak şasi römork
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfun7
Ara
Durum: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 17.350 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,650 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - turntable with heavy-duty ball-bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel fastening kit - without spare wheel, - 1 plastic toolbox with shelf, dimensions 620mm x 360mm x 440mm (W/H/D), lockable with padlock - extendable side extensions up to 3,000 mm wide (not in the rear incline) - storage compartment for wooden planks underneath the low-bed area - 70 mm wooden planks for width extension to 3,000 mm - 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated at 5 t - 7 pairs of lashing mushroom anchors recessed at the top and side of the outer frame, each with a 10 t rating (1 x at the front on the gooseneck, 6 x in the low-bed area) - 5 pairs of stake pockets recessed in the outer frame, 70x40 mm internally - 2 additional pairs of folding lashing eyes, each rated at 10 t, 1x at the front on the gooseneck, 1x behind the 3rd axle - drawbar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) - 235/75 R17.5 - twin steel rims, factory silver - dual-line compressed air braking system - spring-loaded parking brake, ABS and ALB, with front connector, with connection cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin interlock-protected plugs at the front, with connection cable - 1 LED beacon with holder, switched via parking lights (removable beacon) - 2 pairs of warning panels with dual LED illumination, extendable to 3,000 mm - gooseneck front section with steel/chequer plate covering - storage box recessed into the transition incline to the gooseneck - thereafter with 70 mm softwood floor, in wheel arch area with steel/chequer plate covering - rear incline with 70 mm softwood floor - low-bed platform including rear incline: 6,500 mm - steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, surfaced with wood - additional ramp securing
Nedpfsyxh Rzjx Aldolc
Küçük ilan
Gralla
1.820 km
Alçak şasi römork
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Ara
Durum: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate registration technically possible
Nlsdpfxsx Nrp Ns Aldjc
Total technically permissible weight: 24,000 kg / 30,000 kg
Payload approx.: 17,400 kg / 23,400 kg
Unladen weight approx.: 6,600 kg +/- build tolerance
Dimensions approx.:
Total length: 10,900 mm
Total width: 2,550 mm
Neck length: 2,180 mm
Low bed platform length incl. rear bevel: 6,500 mm
Rear bevel length: 950 mm
Chassis width: 2,520 mm
Loading height in loaded low bed: 860 mm
Drawbar height: 900 mm
Drawbar length: 1,900 mm
Features:
- Extendable outriggers to 3,000 mm (not in rear bevel) incl. wooden planks
- SAF drum brake axles
- Parabolic suspension
- Drawbar with certified 40 mm towing eye
- Tyres 235/75 R17.5
- Storage box integrated in transition slope to gooseneck
- 1 plastic toolbox with shelf, 620 x 360 x 440 mm (w/h/d)
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber lined
- Ramps with spring-assisted lifting
- Frame hot-dip galvanized
Subject to errors and modifications.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Ara
Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
Nlodsl Sl Izjpfx Aldoc
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville5-Achs-Tele-Semi m. hydr. Rampen
Ara
Durum: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck:
Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10°
Technical fifth wheel load: 23,000 kg
For tractor units: 6x2, 6x4 and 8x4
Loading Platform:
Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10°
A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm
Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length
Axles and Tyres:
BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
235/75 R 17.5 3PMSF twin tyres
Load index 143/141J (144/144F)
Two-part Steel Ramps:
One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
Hardwood covering
Hydraulically folding ramp tips
Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward
Braking System:
WABCO EBS-E brake system in compliance with EU regulations
Nedpfxomfqi Io Aldjlc
Sockets and Lighting:
24-volt lighting system
Full Metallization:
Complete HRM metallization with ZINACOR 850 for optimal corrosion protection
Surface Treatment:
Entire steel structure shot-blasted automatically after welding using a blast wheel
Second blasting with corundum for optimal coating adhesion
Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax
Rims in silver grey
Steel Structure:
Steel structure made from high-tensile fine-grained steels
Steel grades: S355J2+N/S355MC, S690QL/S700MC
Accessories:
Plug-in steel front wall, approx. 400 mm high
Connection strip for supply lines to the tractor unit
Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches
Outer beam of gooseneck with mounting holes for bolted lashing rings
First hole approx. 200 mm from the front, then every approx. 400 mm
One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring
Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area
Gooseneck guide plate for the saddle plate, approx. 500 mm wide
Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles
Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate
Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform
1 sliding intermediate table for the telescopic tube with large cross-section
Operating valves for hydraulic ramps on right side of vehicle
Central lubrication system with 1 pump, standard grease according to NLGI-2
Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Nedpfxjy Augwj Aldelc
Extendable loading platform:
* Loading platform in extendable design with rear bevel approx. 500 mm x 8°
* 8 pairs of foldable lashing rings (LC 10,000 daN)
* 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Two-section steel ramps:
* One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering
* Ramp with hydraulically folding ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position
Axles:
* BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes
* Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually
* Technical axle load: 12,000 kg each
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data.
Landing legs:
* JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel construction automatically shot blasted after welding using a wheel blast system
* Second blasting using corundum for optimal adhesion of paint system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL
* Rear section metallized and painted in RAL 9010 pure white
Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings at the galvanized front connector panel
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the platform’s rear bevel
* Super Grip rubber ma
Küçük ilan
Aichach
2.196 km
Alçak şasi dorse
MÜLLER-MITTELTALTS3 hydr Rampen GIGANT LUFT
Ara
Durum: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli)
* İlk tescil: 11/2004
* 3 aks
* Havali süspansiyon
* Gigant akslar
* Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir
* Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir
* Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m
* Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m
* Destek ayakları
* Boş ağırlık: 10.260 kg
* Teknik toplam ağırlık: 47.000 kg
* Muayene geçerlilik: 08/2026'ya kadar
* Genel muayene: 02/2026'ya kadar geçerli
Nedpfxow Tgkbj Aldslc
Küçük ilan
Wenzendorf
2.510 km
Alçak şasi dorse
DOLLTieflader Forstmaschinen Lenk Funk Rampe
Ara
Durum: ikinci el, toplam ağırlık: 37.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, bir sonraki muayene (TÜV): 07/2026, Üretim yılı: 2018, Donanım: ABS, * Doll Fahrzeugbau 2 akslı ormancı makinesi lowbed, Tip T2H-0L
* Havalı süspansiyon
* Hidrolik kontrollü akslar
* Uzaktan kumanda
* Toplam uzunluk 16,70 m
* Alçak yatak uzunluğu 9,50 m
* Genişlik 2,55 m
* Toplam ağırlık 37.000 kg (teknik olarak mümkün 39.000 kg)
* Boş ağırlık 10.360 kg
Nledpfx Aloyxb Tvodec
* Taşıma kapasitesi 27.640 kg
* Lastik ebadı 235/75 R17,5
* Çift tekerlek
* Rampalar
* BPW akslar
Muayene tarihli/SP 01/2027
Küçük ilan
Sindelfingen
2.355 km
Tele alçak tabanlı treyler rampalı
NOOTEBOOMMCO-73-04V Tele-Tieflader Rampen 4-Achs
Ara
Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 15.900 kg, azami yük ağırlığı: 42.100 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2001, yükleme alanı uzunluğu: 8.960 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 12.950 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 3.800 mm, süspansiyon: hidrolik, lastik boyutu: 245/70R17,5, dingil mesafesi: 1.360 mm, azami hız: 90 km/s, renk: mavi, römork freni: frenli römork, Üretim yılı: 2001, Donanım: ABS, Nooteboom MCO-73-04V
Top trailer from first owner, first registration: 21.11.2001,
Refurbished in 2014,
Brakes renewed in 12/2025!
66,000 kg total train weight with 3-axle tractor,
Gross weight: 58,000 kg,
Fifth wheel load: 18,000 kg,
Axles 1-4: 10,000/10,000/10,000/10,000 kg,
Njdpoyqm I Uofx Aldolc
Unladen weight: 15,900 kg,
Exact dimensions can be found in the technical data sheet,
Lowbed: 8.96 m + 5.50 m telescopic extension,
Hydraulic supports front and rear allow lifting the trailer including 30 t load completely, e.g., for side ramp unloading,
Hydraulic suspension (also allows leveling for uneven load distribution),
1st axle liftable,
4 steerable axles, either automatic or remote-controlled as desired (also countersteering possible),
Hydraulic ramps + hydraulically extendable up to 3,000 mm,
Loading platform extendable up to 3,000 mm,
Tyres: 245/70R17.5 1A=6/6/6/6mm 2A=11/11/8/8mm 3A=9/9/7/7mm 4A=11/11/7/5mm, spare wheel 6mm,
Further details on request. Sale only to businesses or for export.
Leasing/financing available on request – immediate processing, also without down payment! More information and requirements on request.
Vehicle description is for general identification only. All information, images, and descriptions are provided without guarantee! Equipment details should be verified separately if required. The seller assumes no liability for any errors in typing or data transmission. Subject to error and prior sale.
Thank you very much for your interest! We look forward to your visit.
Our SERVICE
We will gladly consider your used vehicle as part exchange,
30-day export license plates incl. insurance,
EUR-1 and all customs export documents,
TÜV / SP / UVV / tachograph inspection / OBU installation,
Professional delivery to the customer,
Transfer from Stuttgart Airport / Sindelfingen train station to our location possible by arrangement,
Installation of additional components or other individual customer requests possible by arrangement.
Küçük ilan
Lübbecke
2.526 km
Alçak dorse
Langendorf2-Achser Tieflader mit Rampen
Ara
Durum: ikinci el, ilk tescil: 01/1989, renk: kırmızı, Üretim yılı: 1989, Donanım: ABS, Langendorf 2-axle low loader with ramps ABS Tyres 60% remaining profile GR 10.5-20 10PR IDNR 686 We look forward to welcoming you for consultation, contract signing, or vehicle collection at our dealership. Please arrange an appointment in advance. If you are unable to visit us in person, we offer complete processing via telephone, e-mail, WhatsApp, or fax. On request, we can deliver your new vehicle directly to your doorstep, ensuring you the best price as well as maximum safety and convenience throughout the transaction. We are also happy to take your used vehicle in part exchange. We offer digital vehicle appraisals based on your vehicle photos – no need to visit our premises. Our specialised purchasing team guarantees you the highest possible price. Nationwide delivery is available for your 'new' used vehicle, with pick-up of your part exchange if desired – financing and leasing options available. Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Estate) Constantly over 400 vehicles in stock The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment may need to be checked separately. The offer is generally without a new TÜV inspection – we are happy to provide a quote from our partner workshop. Subject to errors and prior sale. = Additional information = Unladen weight: 1,700 kg Payload: 3,300 kg Gross vehicle weight: 5,500 kg VAT/margin scheme: VAT deductible
Nodoxxkrrepfx Aldjlc
Küçük ilan
Lichtenfels
2.271 km
Kutu dorse
KÄSSBOHRERCity-Koffer mit LBW und Zwangslenkung
Ara
Durum: ikinci el, azami yük ağırlığı: 22.580 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2022, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 11.025 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.725 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2022, Donanım: ABS, KÄSSBOHRER 2-Axle City Box Semi-Trailer with Tail Lift
First registration: 11/2022
German registration, one previous owner
Internal dimensions (LxWxH): 11,025 x 2,490 x 2,725 mm
Through-loading height: 2,675 mm
Unladen weight: 7,420 kg
Payload: 22,580 kg
Fifth wheel height: 1,150 mm
BPW axles with large disc brakes, 430 mm
2nd axle with forced steering, TRIDEC system
4x 385/55 R 22.5 tyres with 10 mm tread depth
ALCOA Dura-Bright high-gloss aluminium rims
WABCO trailer EBS with RSS stability program
Air suspension with lifting/lowering function
JOST crank handle landing gear, full-load rated
Body:
Load securing certificate Code XL
Steel front wall, KTL coated
Side walls made from plywood
Floor: 30 mm phenolic plywood, max. forklift axle load 7,200 kg
600 mm steel wear plate at rear
Steel rear portal frame
Doors: smooth version (fully swing), with door retainers, 4 double-joint hinges and 2 internal stainless steel rod locks per door leaf
White GRP roof with 4 integrated LED lamps
2 load securing rails left and right, mounted on side walls
Underride tail lift DHOLLANDIA DHSMR30, lifting capacity 2,500 kg, platform length 1,700 mm, with 2 roll-stops
BDL lock
RENTING is the new BUYING – also available from us immediately on full-service lease!
Nsdpjzfxadofx Aldolc
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Hilpoltstein
2.215 km
Silo yarı römork
KÄSSBOHRERZementsilo 35 m³/3- Achsen/BPW Achsen
Ara
Durum: ikinci el, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 35.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2017, yükleme alanı hacmi: 35 m³, Donanım: ABS, Kässbohrer Çimento Silosu
Nlsdpfx Aexthh Hsldjc
35.000 Litre
3 dingil, havalı süspansiyon, pnömatik korkuluk, BPW akslar, disk frenler, ABS.
Boş ağırlık: 4.650 kg
Yük kapasitesi: 30.850 kg
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
KÄSSBOHRERSPS Mega Schwerlast Plattform Lenkachse
Ara
Durum: yeni, azami yük ağırlığı: 36.565 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.040 mm, Üretim yılı: 2026, Donanım: ABS, Brand-new Kässbohrer SPS Mega Heavy Duty Platform Trailer Immediately Available!
Technical Specifications:
* Fifth-wheel height: 950 mm
* Platform length: 13,550 mm
* Gooseneck: 120 mm
* Platform height: 1,040 mm
* Wheelbase: 7,700 mm
* Axle spacing: 1,360 mm
* Overall width: 2,550 mm
* Gross technical weight [80 km/h]: 45,000 kg
* Gross technical weight [60 km/h]: 46,000 kg
* Unladen weight: 7,827 kg
Chassis:
* BPW axles with air suspension and disc brakes
* Air suspension with load gauge
* 1st axle liftable
* Wabco braking system
* Tyres: 445/45/R 19.5
Frame:
* High-strength chassis constructed from S700 MC steel in accordance with ISO 1726
* 2 mm Omega-profile, reinforced with 30 mm hardwood floor
* 8x2 units of extendable side extensions up to 300 mm
* Landing gear at the front, folding supports at the rear
Ramp:
* Ramp holders at the rear of the vehicle
* Rear ramp storage box
Load Securing:
* Lashing rings
* Stakes pockets
* 6 x 2 units container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 units container locks
Nlsdorukt Rspfx Aldec
* Steel front wall, height 1,500 mm, with Code-XL certificate
Accessories:
* 1x stainless steel toolbox
* Stake box
Chassis color: RAL 3020 Traffic Red
For further information, please do not hesitate to contact us.
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
KÄSSBOHRERSPS Mega Schwerlast Plattform Lenkachse
Ara
Durum: yeni, azami yük ağırlığı: 36.565 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.040 mm, Üretim yılı: 2025, Donanım: ABS, Brand new Kässbohrer SPS Mega Heavy-Duty Platform Semi-Trailer Immediately Available!
Technical Specifications:
* Fifth wheel height: 950 mm
* Platform length: 13,550 mm
* Gooseneck height: 120 mm
* Platform height: 1,040 mm
* Wheelbase: 7,700 mm
* Axle spacing: 1,360 mm
* Overall width: 2,550 mm
* Gross vehicle weight [80 km/h]: 45,000 kg
* Gross vehicle weight [60 km/h]: 46,000 kg
* Unladen weight: 7,827 kg
Chassis:
* BPW axles with air suspension and disc brakes
* Air suspension with load indicator
* 1st axle liftable
* 3rd axle as trailing steering axle
* Wabco braking system
* Tyres: 445/45/R 19.5
Frame:
* Chassis made of high-quality and high-strength S700 MC steel, according to ISO 1726 standard
* 30 mm hardwood floor reinforced with 2 mm Omega-profile
* 8x2 units of extendable side extension boards, expandable up to 300 mm
* Support winch at the front, foldable supports at the rear
Nljdpfx Alorukucsdec
Ramp:
* Provisions for ramps at the rear of the trailer
* Ramp storage box at the rear
Load securing:
* Lashing rings
* Stake pockets
* 6 x 2 container lock pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. container) + 2 x 2 container locks
* Steel headboard, height 1,500 mm, with Code-XL certificate
Accessories:
* 1x stainless steel toolbox
* Stake holder box
Chassis colour: RAL 3020 Traffic Red
For further information, please feel free to contact us.
Küçük ilan
Apeldoorn
2.688 km
Yarı alçak yükleyici
KassbohrerLB4E Uitschuifbaar, Laadrampen, Verbreders, BPW
Ara
Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2019, renk: diğer, Üretim yılı: 2019, Donanım: ABS, = Diğer Opsiyonlar ve Donanımlar =
- BPW dingilleri
- Kaldırılabilir dingil
- Yönlendirme aksı
= Notlar =
Kassbohrer LB4E,
10-2019,
Genişletilebilir,
Genişletme donanımları
Yükleme rampaları,
Nledpfx Alszdd Nvsdjc
BPW dingilleri,
1. aks kaldırılabilir,
3-4 refakatçi olarak gönderildi
= Ek Bilgiler =
Arka aks 1: yönlendirilebilir
= Firma Bilgileri =
Banka bilgileri:
Rabobank hesabı: 39.33.10.655
IBAN: NL73RABO0393310655
Swift Kodu: RABONL2U
- Lütfen işlemden önce her zaman banka bilgilerimizi kontrol edin!
- Araç rezervasyonu depozito olmadan mümkün değildir.
- Sunulan tüm araçlarda yazım ve metin hataları saklıdır.
Sizin için aramayı kolaylaştırıyoruz: "kässbohrer 3achs tieflader lenk saf hydr. rampen"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
































































































































































































































































































































































































































