Kullanılmış Müller-Mitteltal 2A Gelenkt satın al (1.896)

Durumu: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection Nsdexptn Rjpfx Ak Sola * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 22/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at rear * Side underrun protection * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front & rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) cover for toolbox on the turntable platform * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, powder-coated black, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets per side (no stakes included), doubles as lashing points * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and retractable * Loadable in all directions, integrated in outer frame corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for overall width of 3 m (not at rear slope) * Extension planks for platform width stored in a storage compartment under loading area * Digger arm cradle above rear axle up to rear crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings per side in the cradle) * Hydraulically operated folding ramps (approx. 4,650 x 720 mm) with hydraulic movable tip and load holding valves, hydraulically adjustable ramp lateral shift * Hydraulic flow divider in trailer (for truck hydraulic pump performance over 40 l up to max. 140 l/min), dual-circuit hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm drive-up slope) Nodpfxstplwfs Ak Sjla * Loaded platform height approx. 860 mm +/- 30 mm with compensation unit * Chassis, turntable, folding outriggers, drop supports at rear, and loading ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc., painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 19/2026

Durumu: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs – 110 mm wide – with tandem equalizing unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector Nledpol Th Hlsfx Ak Soa * LED tail lights * 50 mm softwood floor * Fixture in front of bulkhead for retrofitting container locks * Bolted flat plate bulkhead * Trapezoidal-profiled steel side panels, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – bracket for storage in the front bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * In each front and rear corner 1 x 10 t lashing ring, various holes for 1.2 t lashing options in front and rear crossmembers * Profifix lashing rail along center axis for securing up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism suitable for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, loading ramps, and folding supports hot-dip galvanized * Side panel painting in RAL 9010 pure white * Painting in other RAL shades available on request for additional charge * Axles, springs, air tank, flange towing eye, and landing gear painted black * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underride protection * Rear swing-down supports on the chassis frame Nodpfxsl Th Ade Ak Sola * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirting with splash guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED taillights * Detachable beacon at the rear * Towing scissors with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), also usable as lashing points * Load Securing Package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, others 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stowed in the center of the loading area * Excavator arm rest above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-section control block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, towing scissors, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 18/2026

Durumu: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum stands ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck display via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (controlled via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed Structure: * Zurr-fix outer frame, 45° bent with hole pattern for lashing means; lashing capacity per lashing point 2,000 kg with a spacing of 480 mm * Option to install 3,000 kg drop-down lashing brackets at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side in the outer frame for stakes 100 x 50 mm – stakes are not included in the delivery * 30 mm phenolic plywood floor ----Cable Drum Stands: * 3 galvanized cable drum stands secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * 6,000 kg drum weight per drum stand Nlsdpfsx Nli Nex Ak Sea * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 locating rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of drums against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Technical upgrade to 30 t gross vehicle weight possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 28 / 2026

Durumu: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded Nlsdpfsx Nlkaox Ak Sea ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Durumu: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower facility ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck dashboard via EBS signal -no truck-side installation required- * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards Nledpsx Nlkgjfx Ak Soa * Underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with hole pattern for lashings, lashing capacity per point 2,000 kg at a distance of 480 mm * Option for installation of 3,000 kg drop lashing rings at intervals of approx. 600 mm - delivery includes 12 each side, 3,000 kg lashing rings- * 5 pockets each side for stake posts 100 x 50 mm in the outer frame - stake posts are not included in delivery- * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum brackets, secured via container locks, with side forklift pockets, center/center 800 mm (width of pockets 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Internal width between support arms approx. 1,775 mm, with cross brace * Max. drum weight per support 6,000 kg * Without drive and drum brake * Support arm with locking device for securing drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in black shade ----Information: * Technical GVW upgrade to 30 t possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available from week 28/2026

Durumu: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when disconnecting the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Plastic toolbox 450 x 470 mm, right side * Side-mounted storage box 1,000 x 500 x 500 mm * Enclosed plastic fenders front & rear axle * Closed side underrun protection, usable as advertising panel * Rear underrun guard * Plastic bumper buffers at the rear * Hazardous goods sign at the rear * 15-pin electrical connector * LED tail lights * Conveyor (roller) track length approx. 6,830 mm * Pneumatic 4-point clamp lock * Mechanically adjustable stop brackets (2 positions) front left and right on the running tracks * 265/70 R 19.5 twin tires * Curb weight 3,220 kg * --Technical gross vehicle weight rating of 20,000 kg possible-- Nodpfov Nulzex Ak Sola * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, kingpin plate and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as Run-on-Ready (RtR) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control panel mounted on trailer as an infotool with pressure sensors for axle load display * 15-pin power socket * LED lighting system 12 / 24V * Rear left removable LED beacon ----General Attachments: * Lateral underrun protection * Front landing gears and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under chassis, right side ----Low Loader Deck: * Fifth-wheel platform with 45° chamfered front corners and toolbox at the front made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminium drop sides (RAL 9010 pure white) on the sides of the fifth-wheel platform, foldable and removable * 150 mm high removable rear drop board * Rear slope on the fifth-wheel platform to the low bed, approx. 700 mm long * Fifth-wheel platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, but not on the rear slope (extension boards included, with storage on the fifth-wheel platform) * Mechanically adjustable warning sign sets front and rear ----Load Securing (Lashing Package): * On the fifth-wheel platform, each 2 x 6.3 t lashing points and 3 x 5 t lashing bars on each side of the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * Each side 2 x 6.4 t lashing eyes and 1 lashing point in the excavator arm recess at the rear * 2 x container locks directly after the step in the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from end of last rigid axle over steering axle to end cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized, hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for future retrofit of hydraulic ramp sliding by customer * Outer plank on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) Nedpfx Akspk D I Aj Sela ----Loading Dimensions: * Loading surface of fifth-wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading surface: approx. 8,500 x 2,520 mm * Unladen deck height approx. 910 mm (incl. 860 mm approach slope) ----Fifth-Wheel Height: * Approx. 1,220 mm (suitable for 2-axle and 3-axle tractor units) ----Painting: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Sample images may show equipment not included on the offer ----Delivery Time: * Available from week 26/2026

Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency Release Device for Spring-Loaded Cylinders * Drum Brakes ----Axles: * 3 x 11 t BPW Eco Plus Axles * Rear axle with steered trailing axle and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR-valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gear at the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high side aluminum drop sides (RAL 9010 pure white) foldable and removable on the fifth wheel platform * Rear wall -150 mm- pluggable * Rear slant on the fifth wheel platform to the low bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber flooring and low bed platform with 60 mm timber flooring * Checker plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 meters total width, but not in the rear slant (extension planks available and stored on the platform) * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each, and 3 x 5 t lashing bars per side in the outer frame * On the low bed platform, 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivotable and lowerable, recessed into the outer frame * 2 x 6.4 t lashing points per side, and 1 lashing ring in the excavator arm trough at the rear * 2 x container locks directly after the cranked section in the low bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the rear crossbeam with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for the customer's retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the entry slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l up to 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm entry slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may contain equipment features not included in the offered vehicle ----Delivery Time: Nedpfol Tnvgox Ak Sjla * Available from calendar week 26/2026

Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference Number: 11612 Nledpfx Asyl Ebpsk Ssa * NEW VEHICLE, not yet registered, now available in RAL 9016 traffic white * Door-to-door delivery available for an additional charge! * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side boards can swing, fold down, and be removed; prepped for later retrofit side board extensions * Front wall hot-dip galvanized * Lockable compartment under the tipping platform for loading ramp * Includes loading ramps 3.31m, 8t per pair * 4 UVV lashing rings LC 5000 daN at front and rear * 8 recessed, folding lashing eyes LC 3000 daN mounted in the tipper floor (centered) * Net hooks * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye 40mm * Galvanized chassis * Tires: 235/75R 17.5 (x4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on the front wall --- Please request an individual quote from us! Additional equipment options available. Financing from just €405 net for 72 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner" --- Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged. WhatsApp Leasing, financing, and trade-ins possible---

Durumu: kullanılmış, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, Müller-Mitteltal alçak şasi damperli römork - Bir araçta hem alçak şasi hem de iki yandan damperli römork - 40 mm çeki halkası - Basınçlı hava fren sistemi - Yükleme ve boşaltma için destek ayakları - Gigant akslar - Lastik ölçüleri: 235/75 R 17,5 - Tambur fren - Boş ağırlık: 3.620 kg - Yükseklik ayarlı çekme kolu - Muayene son tarihi: 08.2026 - SP son tarihi: 02.2026 - SP son tarihi: - Yükleme alanı uzunluğu: 4.800 mm - Yükleme alanı genişliği: 2.430 mm - Yan tavan yüksekliği: 0,5 m Hatalar ve ara satış ihtimali saklıdır. Nljdpfx Akeyk Rfko Soa Dahili araç numarası: 11349.

Durumu: kullanılmış, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles! Nljdji Rk Axepfx Ak Ssa Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Durumu: kullanılmış, boş ağırlık: 5.100 kg, azami yük ağırlığı: 14.900 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1997, yükleme alanı uzunluğu: 8.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, lashing eyes, mechanical ramps, rear support, lateral aluminium underrun protection, twin tires. Body: 2-axle low-bed trailer with mechanical drive-on ramps, 2x SAF axles, drum brakes! Loading height approx. 900 mm! Nljdpfx Aksv R Hmaj Sja Ramp length approx. 2650 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Durumu: kullanılmış, boş ağırlık: 2.910 kg, azami yük ağırlığı: 7.590 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2009, bir sonraki muayene (TÜV): 04/2025, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, side underrun protection, front support, rear support, swinging tailgates Nledpjv S H Sfjfx Ak Soa Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost of €900.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Durumu: kullanılmış, boş ağırlık: 2.230 kg, azami yük ağırlığı: 3.770 kg, toplam ağırlık: 6.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1984, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 10.5-20, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, underrun protection, front support, rear support, swing doors, height-adjustable drawbar. Nlodpfx Akjuxd Rpj Sea Body: 3-way tipper trailer with towing eye and brake connections (red, yellow). ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Durumu: kullanılmış, boş ağırlık: 3.650 kg, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2011, bir sonraki muayene (TÜV): 08/2024, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 285/70R19.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing rings, underrun protection, front support, rear support, swing tailgates, height-adjustable drawbar. Body: Tandem 3-way tipper trailer with aluminum drop sides, 2x Gigant axles, drum brakes! Loading ramps available at an extra charge of €990.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nsdpfx Akjth Uavj Sjla

Durumu: kullanılmış, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Nledpfxsqpgtmj Ak Soa Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Durumu: kullanılmış, boş ağırlık: 2.700 kg, azami yük ağırlığı: 7.300 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2007, yükleme alanı uzunluğu: 5.020 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 400 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, mechanical ramps, front support legs, storage box, height-adjustable drawbar. Body: Tandem low-bed trailer with mechanical drive-on ramps, 2 BPW axles, drum brakes! Nledpfx Aswvikqsk Sea Loading height approx. 930 mm! Ramp length approx. 2,600 mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale Nledpfxepk D Awj Ak Sea ----Delivery Time: * Available from week 20/2026

Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear Nodpfspk D Iijx Ak Sola ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Durumu: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm Njdpfjpk D Dqox Ak Sela * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durumu: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles Nsdondpn Sspfx Ak Ssla ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system * 15-pin electrical connector ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durumu: kullanılmış, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, Donanım: ABS, Johanning’s Nutzfahrzeuge'ye hoş geldiniz, genç ve seçkin ikinci el araçlarınız için uzmanınız. HEMEN teslim! Teslimat mümkün. Fiyat istek üzerine! Finansman ve kiralama istek üzerine mümkündür. Konum: 39606 Osterburg Marka: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11,9 Yıl: 2016 Boş ağırlık: 3.250 kg TÜV: Mart / 2026 SP: Eylül 2026 Daha fazla fotoğraf veya video talep edebilirsiniz. Nsdpfsycpd Aex Ak Ssla Johanning’s Nutzfahrzeuge, seçkin ve genç ikinci el araçlarınız için partneriniz. Hizmetlerimiz – Sizin avantajlarınız (satış sonrası) – Aracınız her durumda takas alınabilir – Aracınız anında ücretsiz olarak terkin edilir – Ruhsat işlemi 150 € (ücretler ve plaka dahil) – Kısa süreli kayıt – Telefonla randevu ile her zaman inceleme ve test sürüşü mümkündür – Teslimat, anlaşmaya göre adrese kadar mümkündür. Hatalar ve ara satış hakkı saklıdır.

Durumu: kullanılmış, azami yük ağırlığı: 14.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2010, bir sonraki muayene (TÜV): 05/2025, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.300 mm, Üretim yılı: 2010, Donanım: ABS, MÜLLER MITTELTAL RA18 Trailer for Hooklift Containers with External Rollers 5,500 mm – 7,000 mm German trailer, 2nd owner Nljdsvg T Nyjpfx Ak Sja Technical Specifications: - Suitable for hooklift containers with external rollers, lengths 5,500–7,000 mm inner length, designed for rear loading. Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer frame guides for containers, hot-dip galvanized - Container locking: The container is secured at 4 points by 2 pneumatic transverse locking units. After sliding the container on, the 4 locking claws are closed by actuating a valve, clamping the container to the chassis frame. Additionally secured at the front by 2 locking elements (with empty holders) that can be positioned as needed along the guide path. - 2 x 9-ton BPW 420 mm drum brake axles with air suspension units - Air suspension with lowering function - Frame: welded steel construction - Braking system: Dual-line brakes according to EU regulation EBS - DUOMATIC coupling head - Spring-loaded parking brake - 24 Volt electrical system - Multi-chamber rear lights - 15-pin plug with connection cable - Lighting in line with EU regulations - Rims: factory silver - Underrun protection: aluminium profiles - Wheel chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Transfer/delivery available at additional cost. All information without guarantee! Sale only to businesses or for export! NOTE: PRICE IS NET PLUS VAT Language support: German, Czech, Polish, Romanian, Russian, English WhatsApp: Contact: Josef