Kullanılmış Müller-Mitteltal Ka-Ta-R 18,0 satın al (56.087)

Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles, rated at required tonnage * First axle configured as a lift axle (fully automatic) * Lift axle with ride height +30 mm via control cylinder * Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering via radio remote control ----Drawbar / Flange Towing Eye: * 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load ----Electric / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, actuated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12V + 24V via tail light circuit ----General Attachments: * BPW support winch at the front * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead, left side (direction of travel) * Shovel and broom holder in front of the bulkhead * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right * Enclosed side impact protection, usable as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Main frame constructed from high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift operation controlled by radio remote * Remote with fast function for unloading, but not for loading * Emergency stop switches on both left and right sides * Container supports: 4 lateral supports per side and 1 rear roller each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 mechanical drop supports at the rear * Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open * Monitoring system for underride guard to ensure it is retracted when tipping ----Loading Height: Pgedpox Dp Agjfx Ag Djp * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized * Axles, air tank, and front support winch painted in black * Palfinger hooklift painted in black / yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor Pgodpfxjx Nli No Ag Djp ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: Pgsdsl Thyxepfx Ag Dep * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted Pgodpfsl Th Eyex Ag Djp ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: Pgedpfx Asxptn Deg Dop * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm Pedpsl Tihuofx Ag Djgp * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection Pjdpel Thymsfx Ag Djgp * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fixture in front of bulkhead for subsequent installation of container locks Pgsdpfjrwc R Asx Ag Djp * 400 mm bolt-on smooth steel front bulkhead * Bolt-on rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear crossmember for 1.2 t lashing option * Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized * Axles, springs, air tank, front support winch, and flange towing eye painted black * Drop sides painted in RAL 9010 pure white * Side walls painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) Pgsdpfxsx Nlkas Ag Djp ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye Pgsdpfxjx Ipapj Ag Dsp ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor Psdpew Ndr Usfx Ag Djgp ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026

Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) Podjr Dpz Aepfx Ag Dogp * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering function featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads) * SmartBoard control unit as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation * Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height) * Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis * Mechanically adjustable warning signage package front and rear * Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on slope * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm steel front wall, slotted in * Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets * One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side * Various drill holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: Pgedoykx I Hopfx Ag Dsp * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. Pgjdpfoykx I Tox Ag Dop ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting Pedpfxex Nlkgs Ag Dsgp ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Pjdpfx Agox Ipbao Dsgp * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders Pedpfxexl Nkgj Ag Degp * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Durum: ikinci el, azami yük ağırlığı: 10.080 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2017, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, yükleme alanı hacmi: 6 m³, Üretim yılı: 2017, Donanım: ABS, Stok No: 5820 Müller-Mitteltal 3 Yönlü Çelik Tandem Damperli Römork / Alüminyum Rampalar / Galvanizli Şasi / Geniş Lastikler! ---- Psdpfxjzdm S So Ag Degp * Üretici: Müller-Mitteltal * Model: KA-TA-R 13,5 * İlk Tescil: 08/2017 * Azami Yüklü Ağırlık: 13.500 kg * Boş Ağırlık (Ruhsata Göre): 3.420 kg * Faydalı Yük: 10.080 kg * Dingil: 2 x Gigant / Kampanalı Frenler * Süspansiyon: Yaprak yaylı * Lastikler: 385/55 R 19.5, yaklaşık %50, çelik jantlı * Muayene (TÜV): 08/2026 * EBS (Elektronik Fren Sistemi) * Renk: Şasi galvanizli, damper gövdesi mavi * Damper Hacmi: Yaklaşık 6 m³ (5,00m uzunluk x 2,42m genişlik x 0,50m yükseklik) * Çekilebilir alüminyum rampalar * 50 mm halka, yükseklik ayarlı çekme çatalı * Yerde 4 çift menteşeli bağlama halkalı damper gövdesi * Ön tarafta tam yük destek ayağı * Arka tarafta ek destek ayakları (katlanabilir) * Sağ ön köşede paslanmaz çelik alet kutusu * Çeyrek çamurluklar * Yük emniyeti sertifikası * İlk sahip Alman üretimi römork! Alman belgeleri ile! Tek elden! İlan Hakkında Olası Hatalara Dair Not: İlan büyük bir özenle hazırlanmış olmasına rağmen, metin ya da verilen bilgilerde tek tük hatalar olabilir. Hatalar, değişiklikler veya ara satışlardan dolayı hiçbir sorumluluk kabul edilmez. Tüm bilgiler taahhüt dışıdır. Bilgilerinizi kontrol etmek veya ek sorular için lütfen bizimle iletişime geçin.

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible. * We are happy to provide a tailored offer. * ----- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs Psdezbfmqspfx Ag Degp * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Digger bucket rest made of hardwood bolted to the front wall * Unladen deck height: 930 mm / Laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for convenient single-operator use * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition * Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams * Toolbox mounted in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request * 1 removable LED beacon at the rear ----- * Leasing, hire purchase, financing, trade-in available * Example: €525 per month, 60-month term, no down payment, no final installment ----- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of opening hours, appointments are possible by arrangement. We speak German, English, Polish, French. Leasing, financing, and trade-in available.

Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem balancing unit with 100 mm wide parabolic springs ----Drawbar / Draw Tube: * Fixed welded draw tube with low-maintenance ball joint for K80 ball head coupling (adjustable +77 mm / 33 mm via front plate) with elevated tower for connection lines ----Electrics / Lighting: * 12V 7+4 pin power supply * LED lighting system 12/24V with protective grille * 2 rear LED work lights switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical support legs at the rear Pgodpfer Dpzuex Ag Dsp * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Hot-dip galvanized two-step access ladder in front of the front wall (left side, FR) ----Chassis: * Chassis made of high-tensile fine-grain steel ----Tipping Platform: * Steel pallet 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls — without central posts — swinging via manual central locking and mechanically foldable with sideboard spring assisters) * Hydraulic tailgate, 500 mm high, functions as hydraulic chute, with 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 recessed and folding 7 t lashing ring in each corner * 4 recessed and folding 3 t lashing rings per side ----Ramps: * 1 pair of aluminium access ramps (10 t/pair for axle distance over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum loading ramps integrated at the rear of the chassis * Load securing according to EN 12642 XL ----Coupling Height: * Approx. 530 mm loaded & approx. 590 mm unloaded ----Paintwork: * Superstructure painted in RAL 9010 pure white * Chassis, draw tube, rear support legs, underrun protection hot-dip galvanized * Axles, air reservoir, front landing gear * K80 coupling painted in black ----Notes: * New vehicle with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer unit with 100 mm wide parabolic springs ----Drawbar/Eyelet: * Solidly welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via the mounting plate), with raised gallows for connection lines ----Electrics / Lighting: * 12 V 7+4-pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without vehicle-side installation ----General Attachments: * Landing gear at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, positioned on the right * Hot-dip galvanized, two-step access ladder in front of the front wall (left side) ----Chassis: * Chassis made of fine-grain steel ----Tipping Platform: * Steel pallet-wide three-way tipper body with M-Strong drop sides (fixed front wall, continuous side walls – without center posts – swinging via manual central locking and mechanically foldable with drop side spring lifter * Hydraulic tailgate, 500 mm high, serves as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t recessed and foldable lashing ring in each corner * 4 x 3 t recessed and foldable lashing eyes on each side ----Ramps: * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 integrated rear ramp compartments in the chassis for aluminum loading ramps * Load securing to EN 12642 XL standard ----Coupling Height: Pgodpfxer Dpz Ho Ag Dop * Approx. 530 mm loaded & approx. 590 mm unloaded ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air reservoir, front landing gear, K80 coupling painted in black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton Podsx Utq Sepfx Ag Djgp Boş ağırlık: 6.530 kg Yük kapasitesi: 25.470 kg Azami toplam ağırlık (zGG): 32.000 kg

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and lifting of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange eye: * Drawbar with adjustable K80 ball coupling ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: Pgjdsy Tr Hiopfx Ag Djp * Support winch at the front * Bolt-on steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking) * 5mm steel floor made of HARDOX-450 or equivalent ----Load securing: * 4 x 3 t UVV lashing rings recessed in the outer frame on each side ----Paintwork: * Axles, air tank, support winch, flange eye painted in black tone * Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24V with galvanized protective housing ----Drawbar / Flange Tow Eye: * Drawbar with K80 ball coupling, adjustable mm (dimensions not specified) ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines ----General Attachments: * Landing leg at the front * Bolted steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter) * Left side wall foldable with drop-side hydromat * Tailgate swinging via automatic hook lock * 5mm steel floor made of HARDOX-450 or equivalent ----Load Securing: * 4 x 3 ton UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, landing leg, flange tow eye painted in black * Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grilles for rear lights, hot-dip galvanized ----Notes: * Sample images ----Delivery Time: * The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026 Psdpfx Aoy Tr Hceg Dsgp

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brake System: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs -110 mm wide- with tandem compensation unit ----Drawbar / Flange eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights Pgsdpfxjl Th Hls Ag Dop * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * Rear fold-out supports (external) * Lateral underrun protection * Quarter plastic mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism * Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points * Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised * Drop sides painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * Axles, springs, air tanks, flange towing eye and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7