Kullanılmış Müller-Mitteltal Ets-Ta-B 10,7 satın al (33.643)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
Gbodpfsxf Skpex Aqtjn
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange drawbar eye:
Gedpfx Aqoxglh Rjtebn
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection
* Side and rear conspicuity tape, reflective
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi voltage system
* LED tail lights
* Removable rotating beacon at the rear
Gsdpfxsl Th Ade Aqtobn
* Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not included) with simultaneous lashing capability
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere
* 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope)
* Widening boards stored in the center of the loading area
* Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest)
* Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm)
* 4-way control block for later retrofitting of hydraulic ramp shifting
* Mechanically adjustable lateral ramp movement
* Load area above slewing ring: approx. 1,960 x 2,520 mm
* Load height unladen approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Load height unladen approx. 910 mm (incl. 860 mm approach slope)
* Chassis, bogie, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg empty weight
* -- technically permissible gross weight of 30,000 kg --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL4-achs Anh. Tieflader, Klapprampe, Gummibelag
Ara
Durum: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0
Gbsdpfx Aqsylfvgjten
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 4 x 11 ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RtR valve
----Drawbar:
* Straight drawbar with 50 mm towing eye and continuously adjustable height setting
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required
* SmartBoard as infotool with pressure sensors for axle load indication per axle group
* 15-pin electrical connector
* LED rear lights
* LED beacon (removable) at the rear
----General attachments:
* Warning sign packages front & rear
* 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side
* Front closed plastic single mudguards
* Rear straight steel mud aprons each with spray protection (spray mist suppression)
* Side underrun protection
----Low-loader platform:
* Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable
* Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood
* 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp
* Rubber overlay on the approach ramp left and right, approx. 860 mm long
* Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each
----Chassis:
* Chassis made of high-strength fine grain steel
----Load securing (Lasi package):
Turntable platform:
* 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform
Low-bed:
* Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions
* Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings
----Ramps:
* Rubber overlay on folding loading ramps
* Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm
* Hydraulic lateral ramp shift & load holding valves
----Rear support:
* Hydraulic rear support
----Wideners:
* 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope)
* Widening planks stored in a compartment left side
----Digger stick recess:
* Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm
* 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side
----Hydraulics:
* Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min)
----Loading dimensions:
* Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp)
* Loading area above turntable: approx. 2,990 x 2,520 mm
----Loading height:
* Loaded approx. 890 mm, +/- 20 mm
----Paintwork:
* Reflective contour tape, sides and rear
* Chassis, turntable, ramps, and folding outriggers hot-dip galvanized
* Axles, drawbar, air tanks and turntable painted in black tone
----Info:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images may include special equipment
----Delivery time:
* Vehicle is expected to be available from week 23/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
Gsdpexf Skvjfx Aqtsbn
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General fittings:
* Support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fixture in front of bulkhead for subsequent installation of container locks
* 400 mm bolt-on smooth steel front bulkhead
* Bolt-on rear stanchions
* Drop sides with spring assist
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes in front and rear crossmember for 1.2 t lashing option
* Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized
* Axles, springs, air tank, front support winch, and flange towing eye painted black
* Drop sides painted in RAL 9010 pure white
* Side walls painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
Gbodpfx Ajrwc R Aeqton
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
Gbjdpsv D Tcbofx Aqten
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Tiefl., verz., Baggerstiel, hydr. Klapprampen
Ara
Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3:
* ABS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at rear
* Side underrun protection
* Pivoting supports at the rear of the chassis frame
* Mechanically adjustable warning panel sets at front & rear
* Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards
* Reflective contour tape on sides and rear
* Hinged (hot-dip galvanized) cover for toolbox on the turntable platform
* Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, powder-coated black, mounted laterally under the chassis
* 15-pin electrical connector
* LED lighting 12 / 24 V
* Removable LED beacon at rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* 4 stake pockets per side (no stakes included), doubles as lashing points
* Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform
* 5 pairs of UVV lashing rings, swiveling and retractable
* Loadable in all directions, integrated in outer frame corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for overall width of 3 m (not at rear slope)
* Extension planks for platform width stored in a storage compartment under loading area
* Digger arm cradle above rear axle up to rear crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings per side in the cradle)
* Hydraulically operated folding ramps (approx. 4,650 x 720 mm) with hydraulic movable tip and load holding valves, hydraulically adjustable ramp lateral shift
* Hydraulic flow divider in trailer (for truck hydraulic pump performance over 40 l up to max. 140 l/min), dual-circuit hydraulics
Godpfxjtplwfs Aqtsbn
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm drive-up slope)
* Loaded platform height approx. 860 mm +/- 30 mm with compensation unit
* Chassis, turntable, folding outriggers, drop supports at rear, and loading ramps hot-dip galvanized
* Axles, springs, drawbar, air tanks, etc., painted black
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from week 19/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable beacon at the rear
* Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing facility
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant)
* Widening planks stored at the center of the loading area
* Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest)
* Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp positioning
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, bogie, towing bar, and access ramps hot-dip galvanized
Gsdpfx Aqex Ipa Netsbn
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* Dead weight 5,900 kg
* --Technically possible gross vehicle weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTALachs leichtbauweise, Radmulden, Alu- Rampen
Ara
Durum: yeni, azami yük ağırlığı: 27.940 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Godpfewh Hdxsx Aqtobn
* 3 x 11 t axles
* Air suspension with raise/lower function and RtR valve
* Start-assist for maneuvering via EBS to the first axle (no truck-side installation) with lifted lift axle +30 mm ride height
* Smart-Board information tool mounted on trailer with pressure sensors for total axle load display
* Last axle configured as self-steering axle with electro-pneumatic steering lock
* Steering lock for the self-steering axle can be activated from the tractor for maneuvering via EBS (without truck-side installation)
* 2" king pin
* 1 liftable axle
* Side underrun protection
* Front aluminum drop legs and rear swinging supports on chassis
* Alcoa LVL One aluminum rims
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at rear
* 2 additional LED reversing lights
* 2 LED work lights on trailer sides (no truck-side installation)
* 7-pin socket at rear for overlength lighting
* Side marker lights with indicator function
* Tire pressure monitoring with in-cab display option via EBS signal (without truck-side installation)
* Mechanically adjustable warning sign holder packages front and rear
* Straight steel fenders
* Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 mm x H = 500 mm x L = 665 mm) with top folding lid and side doors in the chamfered corners
* On each side of the fifth-wheel platform, 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable
* Rear drop-in wall, 150 mm high
* Rear slant on the fifth-wheel platform to the lowbed, approx. 700 mm long with checker plate and perforated strip for attaching aluminum loading ramps
* Fifth-wheel and lowbed platforms with 50 mm clamped wooden planks
* Tread plate above axles
* Preparation for 3 receptacle shafts under the fifth-wheel platform for storing optional aluminum ramps
* Swivel arm as a carrier for connecting lines from the truck to the trailer
* Load securing package consisting of: perforated outer frame on the fifth-wheel platform, 45° bent with hole pattern for lashing equipment (2 t lashing force per point with min. 480 mm spacing), 2 x 6.3 t recessed lashing rings on each side, 1 x 16.5 t lashing ring per side on the slope from lowbed platform to fifth-wheel platform, 2 pairs of 16.5 t lashing rings in the lowbed platform (1 pair on the longitudinal beams after the step, 1 pair over the middle axle next to the longitudinal beam), 3 x 13.4 t lashing rings per side on the outer frame (1 at beginning of fifth-wheel frame step, 1 at start of ramp slope, 1 at end of ramp slope), 3 x 10 t lashing rings each side (2 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle), 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear)
* Extended excavator arm resting area from the end of the last rigid axle over the steering axle to the rear cross member, continuous with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 mm / Depth front 170 mm; 2 x 6.4 t lashing rings per side in the excavator arm rest
* 2 wheel recesses per side, 390 mm deep and 640 mm wide, for transporting wheel loaders with a wheelbase of 3,000 – 3,590 mm and a tire diameter of 1,760 mm – with sliding covers
* 2nd sliding cover...
Küçük ilan
Egestorf
2.485 km
Açık dorseli römork
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering function
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side
* 15-pin electrical connector
* LED lighting
* Front landing gear
* Rear folding support legs
Gbedol Th Dfspfx Aqtjn
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Foldable side walls made of trapezoidal profile steel sheet, split once in the middle
* Steel rear wall, can be inserted between the ramp holders; when not in use, stored inside at the bulkhead
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t fall-arrest lashing eyes every 600 mm – four lateral lashing rings installed on each side
* One 6.3 t lashing ring each at the front and rear corners
* Profifix lashing rail along the longitudinal axis centerline for lashing up to LC 3000 daN
* Various holes in the front and rear cross member for 1.2 t lashing options
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black tone
* Side wall paintwork in a RAL color of your choice (no special or metallic finishes), changeable up to approx. 6 weeks prior to completion
* --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. week 31 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
Gbedpfx Aqjx Ipbgoten
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not supplied), also usable as lashing points
* Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope)
* Widening planks stored in the middle of the loading area
* Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic side-shifting of ramps
* Load area over the turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (including 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. calendar week 36/2026
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts)
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with raise/lower control
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side
* 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery
* 30 mm phenolic resin-coated plywood floor
----Cable Drum Mounts (Drum Supports):
* 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and max. drum width 1,650 mm
Gbodpfx Aox Nlkasqtsn
* Clear width between support arms approx. 1,775 mm, with crossbar
* 6,000 kg drum weight per cable drum mount
* Without drive system and drum brake
* Support arm with clamping latch to secure drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 clamping rings
* 2 centering cones made from polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding
----Loading Height:
* Approx. 1,040 mm when loaded
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in black
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Height-adjustable drawbar, approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED lighting
* Front support winch
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the front wall exterior
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood flooring
* Fixtures in front of the bulkhead and rear for retrofitting 20" container locks
* Bolted smooth sheet metal front wall
* Side walls made of steel sheet – trapezoidal profile – center-folding, split 1x
* Steel rear wall, insertable between ramps, storage bracket inside front wall when not in use
* Bolted rear stakes
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t recessed lashing brackets every 600 mm – 4 lashing rings fitted on each side
* 1 x 6.3 t lashing ring fitted in each front and rear corner
* Profifix lashing rail, centrally aligned longitudinally for lashing up to LC 3,000 daN
* Various holes in front and end cross members for 1.2 t lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
Gbsdsl Thvxspfx Aqtjn
* Rear ascent slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tank, drawbar eye, and support winch painted black
* Side wall paintwork in a customer-specified RAL color (excluding special or metallic paintwork), color changeable up to approx. 6 weeks before completion
* --Reinforced and certified body as per EN 12642 XL including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
* Available from approx. week 31 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
Ara
Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed:
* EBS (electronic braking system)
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 3 x 9 t BPW Eco axles
Gbedsr Dpz Ajpfx Aqton
* Air suspension with lift and lowering function featuring RTR function
* 1st axle liftable
* Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads)
* SmartBoard control unit as an info tool with pressure sensors for total axle load display
* Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation
* Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height)
* Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis
* Mechanically adjustable warning signage package front and rear
* Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side
* Hydraulic flow divider
* Continuous side walls (without central stanchion) up to the drive-on slope
* Rear stanchions foldable
* Steel rear wall inserted in front of the rear stanchions
* 15-pin electrical connector
* LED tail lights
* Removable LED beacon including holder and installation
* 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear)
* Flashing LED side marker lights
* 60 mm larch/Douglas fir wooden floor
* 400 mm steel front wall, slotted in
* Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets
* One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side
* Various drill holes in the front and rear cross members for 1.2 t lashing options
* Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways
* Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting
* Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized
* Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.)
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not supplied), also usable as lashing points
* Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t
Gbjdpfsx Ipb Hsx Aqten
* 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope)
* Widening planks stored in the middle of the loading area
* Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic side-shifting of ramps
* Load area over the turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (including 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. calendar week 36/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization (rear)
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection
* Reflective contour tape on sides and rear
* Folding lid (hot-dip galvanized) for toolbox on the bogie platform
* Multi-voltage system
* LED rear lights
* Detachable rotating beacon (rear)
* Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle
* 15-pin electrical connector
* 4 stake pockets per side (stakes not included) with integrated lashing points
* Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal)
* Widening planks stowed in the center of the loading area
* Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough)
* Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Load area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (incl. 860 mm approach angle)
* Chassis, bogie, towing bar, and ramps hot-dip galvanized
* Axles, springs, air reservoir, etc. painted in black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* Vehicle is hot-dip galvanized
* Brand new vehicle with manufacturer's warranty
Godpfjx Ipavox Aqtjbn
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALTandem- Stahl- 3- Seitenkipper mit Rollplane
Ara
Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML
* Wabco EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
* Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required)
* 2 x 9 t Gigant axles
* Air suspension with level control during tipping operation
* Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate)
* Jost landing gear at the front
* Foldable galvanized steel underrun protection for paver feeding
* Closed individual plastic fenders
* Standing platform at the front wall
* Manual roll-up tarpaulin
* 15-pin electrical connector
* LED tail lights with galvanized protective cover
* 2 LED reversing lights
* Chassis made of fine-grain steel
* Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist)
* Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers
* Front wall platform of grating with step at the drawbar and a hand grip on the front wall
* Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock
* 5 mm steel floor from HBW 450 steel
Gbedpfsxl Nkgex Aqtsn
* Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor
* Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t
* Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery
* Axles, air tanks, landing gear, flange towing eye painted in black tone
* Chassis, underrun protection and drawbar hot-dip galvanized
* New vehicle with full manufacturer’s warranty
* Errors and prior sale excepted
* Available from approx. week 44 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
* 3-in-1 – suitable for hooklift, skip containers, and as a low-loader
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10.5-ton axles
----Suspension:
* Air suspension with manual rear lowering
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required)
* LED tail lights 12/24 V
* 15-pin electrical connector
----General Attachments:
* Tool box made of powder-coated steel plate
* Spare wheel carrier in basket design on right-hand side
* Enclosed side underrun protection
* Quarter mudguards with splash guards made of plastic
* Plastic rear impact protection buffers
* Folding A-board at rear
----Loading Platform:
* Hot-dip galvanized main frame with raised outer frame to guide roll containers
* Steel plate floor with roller recesses in the bogie area
* Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm
* Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails
* Transport of up to 2 skip containers with max. 10 m³ possible
* Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable.
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop-down supports
----Load Securing:
* 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets
* 1 pair of 13.4-ton UVV lashing rings facing towards the front
* Four 8-ton lashing eyes per side integrated into the outer frame
----Ramps:
* Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Painting:
* Reflective contour tape, sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Information:
* Load securing certificate according to DIN 30722-1
* Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight of 20,000 kg technically possible
Gbodpfx Aswb Rakeqten
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egstorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift/lowering device
----Tow Bar:
* Tow bar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side)
* 15-pin power plug
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter fenders
* Rear underrun guard
----Platform:
* Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing
* Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side
* 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included)
* 30 mm phenolic resin plywood flooring
----Drum Supports:
* 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm with cross-connection
* Load capacity per cable drum support 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 locating rings
* 2 centering cones made of polyamide
* 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
----Loading Height:
* Loaded approx. 1,040 mm
----Coating:
Gedpfxjx Nlkge Aqtsbn
* Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized
* Axles painted in a shade of black
----Information:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 51 / 2026
Küçük ilan
Wenzendorf
2.510 km
Roll-off dorse
MÜLLER-MITTELTALTM2 24,0 Absetzmulde
Ara
Durum: ikinci el, azami yük ağırlığı: 19.800 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, Donanım: ABS, * Müller Mitteltal 3 dingilli konteyner taşıma römorku
* Tip TM 2 24
* 7 ila 10 m³ arası iki konteyner için
* Yük emniyeti her bir konteyner için yalnızca iki zincir ile sağlanır
Gedpfsyx R Ensx Aqtjbn
* Çift teker 265/70 R19,5
* Havalı süspansiyon
* BPW dingiller
* Dönel şasi çeki oku; pnömatik olarak alçaltılabilir ve pnömatik kilit açma mekanizmalıdır
* Gergi elemanları takılması için 8 adet 5 ton UVV bağlama halkası
* Konteynerlerin yandan merkezlenmesi için 8 adet değiştirilebilir konteyner durdurucu
* EBS
* Teknik olarak izin verilen toplam ağırlık 27.000 kg
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi römork
MÜLLER-MITTELTALT4PROFI 40,0 Gummibelag BPW
Ara
Durum: yeni, azami yük ağırlığı: 32.300 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, B 11.160 mm
Unladen weight: 8,700 kg
Axle load: 4 x 10,000 kg
Loading length over turntable: 2,900 mm (incl. 390 mm bevel)
Loading length: 6,780 mm
Loading height: 855 mm (-60/+140 mm)
Width: 2,550 mm, extendable to 3,000 mm
Excavator trough integrated at rear of chassis
BPW axles with air suspension and axle load scale
Gedpfjy U Tphjx Aqtsbn
2-piece hydraulic ramps, 4,650 mm long, 720 mm wide
Hydraulic ramp adjustment
Hydraulic rear support legs
Full rubber flooring
Toolboxes
Galvanized
Swivel drawbar with 40/50 mm eye
Küçük ilan
Alsdorf
2.622 km
Roll-off dorse
MÜLLER-MITTELTALKWH 8,8 ML Kabeltransport mit Separatmotor
Ara
Durum: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 05/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer
Gbodpfx Asy Rb Tyjqtjn
* AS NEW and available
* Reference number for inquiries: 11652
* RDÜ tire pressure monitoring system
* EBS brake system, drum brakes, BPW axles, parabolic springs
* Front support winch, rear spring-assisted square tube supports with base plate, safety lock pins for various support heights
* Tow bar with 40 mm towing eye (height-adjustable mm)
* 15-pin electrical connector
* LED lighting
* 315/80 R 22.5 tires, fully covered steel mudguards
* Swiveling cable drum superstructure
* Steel drum shaft with 76 mm diameter, with centering and rotating ends
* 1 pair of stepped polyamide centering cones
* Suitable for drums Ø 800-3,000 x (1,700 mm width between drum arms)
* With tension lock for securing the drum at the carrier arm ends, and a locking device between the cable drum superstructure and the chassis with a centrally positioned claw lock
* Motor-hydraulically operated pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13.
* Drum drive is motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and drum drive brake.
* Also includes a hydraulic power unit: Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable either via truck hydraulics or the power unit by swapping connection lines
* Toolbox approx. 500 x 350 x 400 mm
* Chassis and drawbar hot-dip galvanized
* Advertising space integrated into the side guard, exterior polyester-coated in RAL white
* ----as-new condition (used for only 1 project)
* ----
* Financing is possible through our partners with or without down payment and final value, and with various terms. Contact us for a quote!
* We are an official Müller Mitteltal dealer!
* Example hire-purchase from our partner FM LeasingPartner starting from only €515/month (net) for a 72-month term (no down payment and €0 final value).
* Request your quotation now!
----
* Our Opening Hours
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
* Outside these hours, appointments can be arranged as needed
* We speak German, English, Russian, Polish and French
----
Küçük ilan
Wiesmoor
2.630 km
Roll-off dorse
MÜLLER-MITTELTALTRA Kombi Anhänger 18,0
Ara
Durum: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene)
- Toplam ağırlık: 18.000kg / 20.000kg
- Boş ağırlık: 4.360kg
- Taşıma kapasitesi: 13.640kg / 15.640kg
Diğer bilgiler
- Çift lastikli 235/75R17,5
Gbodpfx Asyw Ep Sjqten
- Gigant akslar
- 4 çift yük sabitleme halkası
- PNömatik kilitleme sistemi
- Alçaltılabilir döner şasi
- Yaklaşık 2.300mm'lik rampa, saklama bölmesinde
- Arka destek ayağı
- Ekipman dolabı
- Alt koruma
Küçük ilan
Coppenbrügge
2.460 km
Müller-Mitteltal KWH 9.9 - kablo makarası römorku
Müller-MitteltalKWH 9.9 - Kabeltrommel-Anhänger
Ara
Durum: yeni, Üretim yılı: 2026, New model, now with 9,900 kg gross vehicle weight!
Cable drum transport trailer. Permissible gross weight: 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol, 8.1 kW, electric start) with weather protection cover, hydraulically driven drum with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centring cones for cable drums. Dual-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tyre pressure monitoring. Height-adjustable 40 mm towing eye, 2-line air, LED lighting 12+24 V. Toolbox, advertising panels integrated into the side underrun protection. Fully hot-dip galvanized vehicle. New vehicle including factory warranty. Available from approx. week 26, 2026. (Archive photos)
= Further information =
Unladen weight: 2,900 kg
Payload: 7,000 kg
Gross vehicle weight: 9,900 kg
Front tyres: 315-80R22.5
Country of manufacture: DE
Godpfeyyhb Nox Aqtobn
Please contact Jan-Marc Schwickert for further information.
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal ets-ta-b 10,7"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






















































































































































































































































































































































































































































































