Kullanılmış Meusburger Alçak Yükleyici Inşaat Makineleri satın al (64)

Durumu: kullanılmış, toplam ağırlık: 38.500 kg, boş ağırlık: 10.000 kg, azami yük ağırlığı: 28.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 3.100 mm, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 03/2022, süspansiyon: hava, renk: mavi, lastik boyutu: 245.70 r 17.5, Üretim yılı: 2005, makine/araç numarası: 3, Donanım: ABS, 3 low-bed straight semi-trailers with rear ramps by Meusburger, 5th wheel coupling at 1m, 3 axles with 3rd steering axle, recesses in the loading floor, adjustable height roof system, sliding tarpaulin, rear doors, internal height 3.10m, inspected until 31.10.2022-DEALER INTERDRIVE SRL-PARMA Crjdpfjid Drijx Ab Ujh

Durumu: kullanılmış, toplam ağırlık: 45.000 kg, boş ağırlık: 12.450 kg, azami yük ağırlığı: 32.550 kg, işletme ağırlığı: 12.450 kg, yükleme alanı uzunluğu: 9.730 mm, yükleme alanı genişliği: 2.550 mm, ilk tescil: 11/2008, süspansiyon: hava, renk: turuncu, Very well-maintained vehicle from first owner: Meusburger MTS 3 - 45T Tri-axle low-loader trailer with drive-on ramp Heavy-duty transport Type: MTS 3 Gross vehicle weight: 45,000 kg Payload: 32,550 kg Length: 13,900 mm Width: 2,500 mm Crsdpjwb Sh Aefx Ab Ujh Air suspension

Durumu: yeni, toplam ağırlık: 49.000 kg, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, işletme ağırlığı: 9.800 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava kaldıracı, renk: gri, lastik boyutu: 245/70 R 17,5, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm Codpfx Asxgm S Djb Uorh - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Durumu: kullanılmış, renk: kırmızı, Üretim yılı: 2014, Meusburger MTS-3. Baujahr: 2014. 10 Tonnen BPW-Achsen. Eigengewicht: 12.100 kg. Nutzlast: 35.900 kg. Maximales Gesamtgewicht: 48.000 kg. Sattellast: 18.000 kg. 1. Achse Liftachse. 3. Achse Nachlauflenkachse. Luftfederung. Geschlitzter Boden. Seilwinde. Hydraulische Überfahrbrücke vom Boden zum Schwanenhals. Hydraulik arbeitet mit NATO-Stromversorgung. Zweiteilige hydraulische Auffahrrampen. Hydraulikseitenverschub von links nach rechts. Werkzeugkästen. Abmessungen: Schwanenhals: L: 3.750 mm B: 2.550 mm H: 1.440 mm Sattelhöhe: 1.200 mm Ladefläche: L: 9.730 mm B: 2.550 mm H: 900-950 mm Crjdpfx Aboxg H Hzs Uoh Bereifung: 235/75R17,5, Profil 60–80 % Deutscher Auflieger! ID-Nr.: 639. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf sämtliche Anzeigen, Angebote und Kostenvoranschläge von Heinhuis sowie auf sämtliche von Heinhuis getätigten Verträge und den entsprechenden Vertragsverhandlungen Anwendung. Durch jegliche Form der Kontaktaufnahme erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2014 Leergewicht: 12.100 kg Zuladung: 35.900 kg zGG: 48.000 kg = Firmeninformationen = Für mehr Informationen: WhatsApp:

Durumu: yeni, toplam ağırlık: 38.000 kg, boş ağırlık: 11.000 kg, azami yük ağırlığı: 27.000 kg, işletme ağırlığı: 11.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.550 mm, renk: gri, lastik boyutu: 235/75 R17.5, Donanım: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and drop deck without rear bevel - Frame neck + fifth wheel plate 225 mm - Drop deck designed for a point load of 25 t over 5 m - Outer frame closed outward with welded-in lashing rings for securing loads - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tyres: - BPW low-bed trailer axles, each with a 10 t axle load, air bag diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for two coupling heights +100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded flooring, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the drop deck as well as 1 pair each on the gooseneck and at the beginning of the rear unit – 2 pairs of 4 t lashing rings on both gooseneck and rear unit) - 6 pairs of mushroom-type lashing points in the outer frame in the drop deck - Storage compartment with lid in the front left and right of the drop deck floor Front Wall: - 25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning system Sliding Tarpaulins: - Sliding curtain both sides with welded-in vertical and horizontal straps (approx. 600 mm spacing) and stainless-steel tension locks - Adjustable curtain straps (over-center) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm length, positioned in the drop deck at the front cranking - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door retainer - One aluminum double-joint hinge and two recessed grip recesses per door wing Front Corner Posts: - At roof height, bolted at the front end Central Posts: - 3 pairs of continuously adjustable folding stanchions - Stanchions can be moved along the entire length via trolleys - Central stanchions in the drop deck can also be fixed at the rear platform Roof: - EDSCHA sliding roof (galvanized) with crossbeams that can be shifted in both directions (pushed together to the front in the cargo area) - Rear portal cross member can be swiveled away - PVC tarpaulin roof without customs seal - Hand-operated hydraulic lifting roof on both sides, lift 450 mm - Raised roof movable to the front (9x50) and rear (9x50) positions - Including rear curtain extension and curtain skirt - Roof can be cranked out at the very front on the bulkhead by 900 mm each Accessories: Csdpfeiu Eu Nsx Ab Uerh - Extendable warning boards (removable front and rear with socket) incl. position lights up to 4,000 mm loading width - Storage for 4 warning boards on the front wall, top right and left inside - 1 aluminum ladder with bracket, 2,500 mm long, mounted on the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR panel on the rear wall - Central lub

Durumu: kullanılmış, renk: kırmızı, Üretim yılı: 2018, Meusburger MTS-3. Baujahr: 2018. 10 t BPW-Achsen. Eigengewicht: 11.700 kg. Nutzlast: 36.300 kg. Zulässiges Gesamtgewicht: 48.000 kg. Sattellast: 18.000 kg. 1. Achse Liftachse. 3. Achse Nachlaufachse. Luftfederung. Geschlitzter Boden. Seilwinde. Hydraulische Brücke vom Boden zum Schwanenhals. Länge: 3420 mm. Hydraulik funktioniert über NATO-Stromversorgung vom Zugfahrzeug. 2-Punkt hydraulische Abstützungen am Heck. 2-Wege hydraulische Rampen: - Hydraulisch von links nach rechts. - Länge: 4600 mm. Werkzeugkästen. Abmessungen: Schwanenhals: L: 3750 mm. B: 2550 mm. H: 1440 mm. Königszapfenhöhe: 1200 mm. Tiefbett: L: 9730 mm. B: 2550 mm. H: 900 - 950 mm. Credpfx Abexg H A Aj Ujh Bereifung: 70%. Deutscher Auflieger! ID-Nr.: 408. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle mit Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Durch jede Art von Reaktion akzeptieren Sie die Geltung dieser Allgemeinen Geschäftsbedingungen und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettopreise für den Export. = Weitere Informationen = Baujahr: 2018 Leergewicht: 11.700 kg Zuladung: 36.300 kg zGG: 48.000 kg = Firmeninformationen = Für mehr Informationen: WhatsApp:

Durumu: kullanılmış, toplam ağırlık: 45.000 kg, boş ağırlık: 9.000 kg, azami yük ağırlığı: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.200 mm, ilk tescil: 04/2023, lastik boyutu: 385/55 r 22,5, makine/araç numarası: 837, Donanım: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report. Credpfx Abjma Hmio Ujh Chassis (extendable): Steel frame welded construction – super lightweight design. Neck height approx. 200 mm. Fifth wheel plate with replaceable 2" kingpin. Frame reinforcement for a point load of 25 t over 2 m in the retracted state. Main frame preloaded by approx. 30-50 mm. U-profile outer frame, 6 mm thick (140/70/5 mm), designed as a perforated frame with a hole diameter of 40 mm. Vehicle with extendable central frame, extension length approx. 7,500 mm, each pneumatically lockable. Adjustable intermediate support, approx. 300 mm wide, fixed-mounted – forward installation dimension matched to front corner dimension of 2,040 mm. Aluminum underrun protection. Landing gear: Mechanical 24 t landing legs with single-sided operation and load compensation. Axles and Tires: BPW air suspension axles, each with 9 t axle load, air bellows diameter 360 mm. Disc brakes (small disc TSB3709). Axle spacing 1,810/1,810 mm. 6 steel disc wheels, 10 holes, with offset, hub-centered. 6 tires 385/55 R 22.5 160J, tubeless. Steering: All 3 axles with hydraulic turntable steering via kingpin and turntable. Electrohydraulic follow-up steering powered via NATO socket from the towing vehicle (without installation in the truck and without NATO connection cable). Incl. radio remote control for follow-up steering. Lubrication System: Centralized lubrication system with 2 pumps for all grease points on the steering and axles, manufacturer BekaMax. Braking System: Dual-line brake system with EBS. EBS braking system (WABCO 4S2M). Aluminum air tanks. Spring-loaded parking brake. Electrical Equipment: According to road vehicle regulations. 24 volts. 2x 7-pin and 1x 15-pin socket. 2 pcs. 7-chamber LED tail lights in the underrun protection. 1 pc. 3-pin socket at the rear for overhang lighting in the underrun protection. Lateral LED marker lights. 1 bracket for rotating beacon at the rear. Paintwork: Steel grit blasting, spray galvanizing of chassis including telescopic section and primer coat. Paint finish in DB 7350 Novagrau. Underrun protection in RAL 9010 pure white. Contour markings to EU standard, yellow or white on the sides, yellow or red on the rear. Plastic parts black, unpainted. Accessories: Plastic half-shell fenders with Clear-Pass mud flaps. 28 mm Meranti floor (approx. 1-2 mm overhanging). Front wall made of 25 mm aluminum hollow profiles, 2,200 mm high, bolted, 2 front uprights: 2,200 mm high, bolted at the side. Upper part of front wall with cross-connection, as well as 1 lashing eye each left and right for securing the front wall. Lateral underrun protection. 4 wheel chocks mounted externally on the front wall. Long license plate holder in underrun protection. 2 ECE plates on rear closure plate. 11 pairs of heavy-duty lashing rings (foldable), each with a lashing capacity of 8 t. 1 pair of lashing rings with 4 t capacity for securing the front wall. 6 pairs of load-securing studs on the side of the outer frame, 24 mm rib thickness, each with a lashing capacity of 6 t. 7 pairs of stake pockets on the side of the outer frame for removable stanchions of size 100x50 mm. 8 stake pockets (2 per side) directly behind the front wall as empty holders for removable stanchions. Without stanchions. 5 crossmembers for stake pockets for stanchions size 100x50x5 mm extending from the outer frame to the central frame, first row positioned at height ...

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, renk: kırmızı, lastik boyutu: 235/75R17,5, Üretim yılı: 2014, = Additional Options and Accessories = - Air suspension = Remarks = Meusburger MTS-3. Year: 2014. 10-ton BPW axles. Unladen weight: 12,100 kg. Payload: 35,900 kg. Gross weight: 48,000 kg. Hydraulics from trailer operates via NATO coupling. 2-point hydraulic outriggers at the rear. Slitted floor. Dual-way hydraulic ramps: Hydraulically adjustable left to right. Ramp length: 2.75 meters + 1.90 meters. Air suspension. Hydraulic bridge from floor to gooseneck (length: 3,420 mm). Third axle is steerable. Platform dimensions: Gooseneck: L: 3,800 mm. W: 2,550 mm. h: 1,400 mm. Platform: L: 9,730 mm. W: 2,550 mm. H: 950 mm. Tyres: 235/75R17.5, 80% tread remaining. German trailer! ID No: 413. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into and all prior negotiations. By responding in any form, you accept the applicability of these General Terms and Conditions and declare that you have taken note of them. Our prices are net export prices. Crsdpfjxgp Ihjx Ab Ueh = Additional Information = General Information Year of manufacture: 2014 Axle Configuration Tyre size: 235/75R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right inner: 80%; Tyre profile right outer: 80% Rear axle 2: Twin tyres; Max. axle load: 10,000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right inner: 80%; Tyre profile right outer: 80% Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steerable; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right inner: 80%; Tyre profile right outer: 80% Weights Unladen weight: 12,100 kg Payload: 35,900 kg Gross weight: 48,000 kg Financial Information Price: On request = Company Information = For more information: WhatsApp:

Durumu: yeni, toplam ağırlık: 45.000 kg, azami yük ağırlığı: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, renk: gri, lastik boyutu: 385/55 r 22,5, Donanım: ABS, Chassis (extendable): Steel frame welded construction – ultra-lightweight design. Gooseneck height approx. 200 mm. Fifth wheel plate with replaceable 2” king pin. Frame reinforcement for point load of 25 t over 2 m when retracted. Main frame pre-tensioned approx. 30–50 mm. U-profile outer frame, 6 mm thick (140/70/5 mm), perforated with 40 mm diameter holes. Vehicle fitted with extendable central frame, extension length approx. 7,500 mm, each segment lockable pneumatically. Cjdpfoi Dwlzex Ab Uorh Movable intermediate support approx. 300 mm wide, fixed-mounted, front fitting dimension matched to front corner 2,040 mm. Aluminum underride guard. Landing Legs: Mechanical 24 t landing legs with single-side operation and thrust equalization. Axles and Tyres: BPW air suspension axles, 9 t axle load each, air bellow diameter 360 mm. Disc brakes (small disc TSB3709). Lifting and lowering device with total lift of approx. 200 mm. No lift axle. Axle spacing 1,810/1,810 mm. 6 steel disc wheels, 10-bolt, with offset, hub-centered. 6 tyres 385/55 R 22.5 160J, tubeless. Steering: All 3 axles with hydraulic turntable steering via fifth wheel and turntable. Electrohydraulic trailing steering, powered via NATO socket from tractor unit (no installation in truck, no NATO connecting cable). Including radio remote control for trailing steering. Lubrication System: Central lubrication system with 2 pumps for all lubrication points on steering and axles, make BekaMax. Brake System: Two-line braking system with EBS. EBS brake system (WABCO 4S2M). Aluminum air tanks. Spring-actuated parking brake. No connecting hoses or cables supplied for truck connection. Electrical Equipment: According to vehicle regulations. 24 volt. 2x 7-pole and 1x 15-pole sockets. 2 pcs. 7-chamber tail lights in underride guard. Full LED. 1 pc. 3-pole socket at rear for overhang lighting in underride guard. Side LED marker lights. 1 holder for rotating beacon at rear. No connecting cable to truck supplied. Finish: Steel shot-blasting, chassis including telescope and primer spray-galvanized. Painted in DB 7350 Novagrau. Underride guard in RAL 9010 pure white. Contour marking according to EU regulation, yellow or white on sides, yellow or red at rear. Plastic parts black, unpainted. Accessories: Plastic half-shell mudguards with Clear-Pass spray flaps. 28 mm Meranti floor (projection approx. 1–2 mm). Front wall of 25 mm aluminum hollow profiles, 2,200 mm high, bolted, 2 front stanchions: 2,200 mm high, bolted on sides. Top of front wall with cross member and one lashing eye on left and right for front wall tensioning. Side underrun protection. 4 wheel chocks on outside of front wall. Elongated licence plate bracket in underride guard. 2 ECE plates on rear closure plate. 11 pairs of heavy-duty lashing rings (foldable) with 8 t lashing capacity each. 1 pair of lashing rings with 4 t capacity for front wall tensioning. 6 pairs of mushroom pins on side of outer frame, bridge thickness 24 mm, 6 t lashing capacity each. 7 pairs of stake pockets on side of outer frame for plug-in stakes of 100x50 mm size. 8 items (2 per side) stake pockets directly after front wall for plug-in stake storage (without stakes). 5 stake pocket cross beams for plug-in stakes (100x50x5 mm), running from outer frame to central frame: 1st row at king pin, 2nd before separation, 3rd before 1st axle, 4th between 1st and 2nd axle, 5th behind 3rd axle. Extendable warning plates with positions...

Durumu: kullanılmış, Üretim yılı: 2013, Meusburger MTS-5+2+2. Baujahr: 2013. Gigant-Achsen 12 t. Eigengewicht: 19.860 kg. Zulässiges Gesamtgewicht: 84.000-108.000 kg. Sattellast: 18.000-24.000 kg. Hydraulisches Schwanenhals. Hydraulik kompatibel mit NATO. EBS ABS ALB. Werkzeugkasten am Schwanenhals. Zentralschmieranlage. 2 x 6 Meter ausziehbar. Insgesamt 12 Meter Auszug! 2 x 25 cm verbreiterbar. Hydraulische Federung. 1. Achse Liftachse. Powersteering – alle Achsen lenkbar. Abmessungen: Schwanenhals: L: 3.900 mm. B: 2.550 mm. H: 1.500 mm. Sattelhöhe: 1.250 mm. Ladefläche (5 Achsen): L: 9.500 mm. B: 2.550 mm. H: 900 mm. 2 x Meusburger MUA-2. Gigant-Achsen 12 t. Zulässiges Gesamtgewicht: 24.000 kg. Ladeflächenlänge: 3.200 mm (x2). Bereifung: 245/70R17,5 80 % Profil. ID-Nr.: 450. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle von Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Mit jeglicher Rückmeldung akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind reine Netto-Exportpreise. = Weitere Informationen = Baujahr: 2013 Leergewicht: 19.860 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Cedjxd S Tzspfx Ab Uerh Für weitere Informationen: WhatsApp:

Durumu: yeni, toplam ağırlık: 49.000 kg, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, işletme ağırlığı: 10.100 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Credpfswviwkox Ab Uoh Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durumu: kullanılmış, renk: kırmızı, Üretim yılı: 2016, Meusburger MTS-3 Baujahr: 2016 10 t BPW-Achsen Eigengewicht: 12.000 kg Nutzlast: 36.000 kg Gesamtgewicht: 48.000 kg Sattellast: 18.000 kg Hydraulik vom Auflieger – kompatibel mit NATO-Anschluss Seilwinde Geschlitzter Boden 1. Achse Liftachse 3. Achse Nachlauflenkachse (reibungsgelenkt) Luftfederung Hydraulische Brücke vom Boden zum Schwanenhals - Länge: 3.450 mm Werkzeugkästen 2-fach hydraulische Rampen: - Hydraulik links–rechts - Länge: 2.700 + 1.900 mm EBS, ABS, ALB Abmessungen: Schwanenhals: L: 3.730 mm B: 2.550 mm H: 1.350 mm Sattelhöhe: 1.150 mm Tiefbett: L: 9.750 mm B: 2.550 mm H: 900 mm 2 x Funkfernbedienung Bereifung: 235/75R17,5 (Profil 50–80 %) Deutscher Auflieger! Csdpfx Ajxb Ulueb Ujrh ID-Nr.: 534 Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis, alle von Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Mit jeder Art der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2016 Leergewicht: 12.000 kg Zuladung: 36.000 kg zul. Gesamtgewicht: 48.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durumu: yeni, toplam ağırlık: 49.000 kg, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, işletme ağırlığı: 8.490 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, renk: gri, lastik boyutu: 245/70 R 17,5, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) Codpfx Abjwu A Slj Ujrh - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Durumu: kullanılmış, renk: yeşil, Üretim yılı: 2017, Meusburger MTS-4. Yıl: 2017. 8 ton BPW dingil. Maksimum ağırlık: 50.000 kg. Crjdpfx Aow Th Uhsb Uoh Kingpin yükü: 18.000 kg. 4 metre uzatılabilir. EBS ABS ALB. Twistlock bağlantıları. Havalı süspansiyon. 3. ve 4. dingil yönlendirmeli (sürgülü dingiller). Çinko kaplama. Ölçüler: U: 3950 mm. G: 2550 mm. Y: 1100 mm. Kingpin yüksekliği: 1000 mm. Zemin: U: 9600 mm. G: 2550 mm. Y: 800 mm. Lastikler: 205/65R17,5 %70. Mega - Lowdeck! ID NO: 466. Heinhuis’in Genel Şart ve Koşulları, Heinhuis tarafından yapılan tüm ilan, teklif ve fiyat listeleri ile Heinhuis tarafından akdedilen tüm sözleşmeler ve bunlara ilişkin müzakereler için geçerlidir. Herhangi bir şekilde yanıt verdiğinizde, Heinhuis’in Genel Şart ve Koşullarının geçerliliğini kabul etmiş ve bu şartlardan haberdar olduğunuzu beyan etmiş olursunuz. Fiyatlarımız net ihracat fiyatlarıdır. = Daha fazla bilgi = Üretim yılı: 2017 Azami yüklü ağırlık: 50.000 kg Uzatılabilir yapı: Evet = Firma Bilgileri = Daha fazla bilgi için: WhatsApp:

Durumu: yeni, toplam ağırlık: 49.000 kg, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, işletme ağırlığı: 8.950 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, renk: gri, lastik boyutu: 245/70 R 17,5, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Crodpfxswu Agis Ab Ueh Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durumu: kullanılmış, renk: kırmızı, Üretim yılı: 2017, Meusburger MTS-3. Baujahr: 2017. 10 Tonnen BPW-Achsen. Max. Gesamtgewicht: 38.500 kg. EBS, ABS, ALB. Hydraulik vom Auflieger über NATO-Anschluss einsetzbar. Gelochter Boden. Hydraulische Verbindung vom Boden auf den Schwanenhals: - Länge: 3.450 mm. Seilwinde. Hydraulisch ausziehbare Rampe. Luftfederung. 3. Achse: Nachlauf-Lenkachse. Abmessungen: Schwanenhals: L: 3.370 mm. B: 2.550 mm. H: 1.300 mm. Sattelhöhe: 1.150 mm. Ladefläche: L: 7.100 + 2.750 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5, 50% Profil. Deutscher Trailer! Credpfjw Thw Aox Ab Uoh ID-Nr.: 528. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge der Firma Heinhuis, alle von Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Durch jede Form der Reaktion erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis einverstanden und bestätigen, dass Sie von deren Inhalt Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2017 zul. Gesamtgewicht: 38.500 kg Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durumu: kullanılmış, renk: kırmızı, Üretim yılı: 2018, Meusburger MTS-3. Baujahr: 2018. BPW-Achsen 10 t. Leergewicht: 11.700 kg. Zuladung: 36.300 kg. Gesamtgewicht: 48.000 kg. Sattellast: 18.000 kg. Hydraulik vom Auflieger über NATO-Anschluss. Seilwinde. Geschlitzter Boden. 1. Achse Liftachse. 3. Achse Nachlaufgelenkt / lenkbare Achse (reibungsgelenkt, nachlaufgelenkt). Luftfederung. Hydraulische Brücke zwischen Ladeboden und Schwanenhals. - Länge: 3.450 mm. Werkzeugkästen. 2-Wege-Hydraulikrampen: - Hydraulik regelbar von links nach rechts. - Länge: 2.700 + 1.900 mm. EBS, ABS, ALB. Abmessungen: Schwanenhals: L: 3.730 mm. B: 2.550 mm. H: 1.350 mm. Sattelkupplungshöhe: 1.150 mm. Ladeboden: L: 9.750 mm. B: 2.550 mm. H: 900 mm. Funkfernbedienung + kabelgebundene Fernbedienung. Bereifung: 235/75R17,5 50–80 %. Deutscher Auflieger! ID NR: 536. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Inserate, Angebote und Kostenvoranschläge der Firma Heinhuis, für alle von Heinhuis geschlossenen Verträge sowie für den diesen Verträgen vorangehenden Verhandlungen. Durch jede Art der Rückmeldung akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Cedpfjw Thunsx Ab Usrh Baujahr: 2018 Leergewicht: 11.700 kg Zuladung: 36.300 kg zulässiges Gesamtgewicht: 48.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durumu: kullanılmış, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 205/65R17,5, Üretim yılı: 2014, = Additional options and accessories = - Air suspension = Remarks = Meusburger MPG-5. Year of manufacture: 2014. 8-ton BPW axles. Unladen weight: 15,490 kg. Payload: 42,510 kg. Gross vehicle weight: 58,000 kg. Kingpin load: 18,000 kg. Hydraulic functions on the trailer operate with NATO power supply. Spare wheel. Sliding tarpaulins. Sliding roof. 1st and 2nd axles are lift axles. 4th and 5th axles are steering axles. Internal dimensions: Neck: L: 2,900 mm. W: 2,500 mm. H: 2,620 mm. Kingpin height: 1,250 mm. Loading area: L: 9,980 mm. W: 2,500 mm. H: 3,180 mm. Front: 2 x 1,250 mm hydraulic extension. Rear: 2 x 1,750 mm hydraulic extension. Tyres: 205/65R17.5 80% tread remaining. ID No.: 339. 2 units available. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, as well as all agreements concluded by Heinhuis and all negotiations leading up to them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these conditions. Our prices are net export prices. Cedpow Rwv Aofx Ab Ujrh = Further Information = General Information Year of manufacture: 2014 Axle configuration Tyre size: 205/65R17.5 Axle manufacturer: BPW Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 8,000 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 2: Twin tyres; Lift axle; Max. axle load: 8,000 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 3: Twin tyres; Max. axle load: 8,000 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 4: Twin tyres; Max. axle load: 8,000 kg; Steered; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 5: Twin tyres; Max. axle load: 8,000 kg; Steered; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Weights Unladen weight: 15,490 kg Payload: 42,510 kg Gross vehicle weight: 58,000 kg = Company Information = For more information: WhatsApp:

Durumu: kullanılmış, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 205/65R17,5, Üretim yılı: 2014, = Additional Options and Accessories = - Air suspension = Notes = Meusburger MPG-5. Year: 2014. 8-ton BPW axles. Unladen weight: 15,490 kg. Payload: 42,510 kg. Gross vehicle weight: 58,000 kg. Kingpin load: 18,000 kg. Hydraulics compatible with NATO. Sliding tarpaulin. Sliding roof. Crsdpfew Rwvpjx Ab Uoh 1st and 2nd axles are lift axles. 4th and 5th axles are steering axles. EBA, ABS, ALB. Hydraulically extendable, including cable remote control. Internal dimensions of trailer: Gooseneck: Length: 2,900 mm Width: 2,500 mm Height: 3,180 mm Kingpin height: 1,250 mm Load area: Length: 9,980 mm Width: 2,500 mm Height: 3,180 mm Tyres: 205/65 R17.5, tread depth 80%. ID No.: 339. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Year of manufacture: 2014 Axle Configuration Tyre size: 205/65 R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; max. axle load: 8,000 kg; steered; tyre tread left inside: 80%; tyre tread left outside: 80%; tyre tread right inside: 80%; tyre tread right outside: 80% Rear axle 2: Twin tyres; lift axle; max. axle load: 8,000 kg; steered; tyre tread left inside: 80%; tyre tread left outside: 80%; tyre tread right inside: 80%; tyre tread right outside: 80% Rear axle 3: Twin tyres; max. axle load: 8,000 kg; steered; tyre tread left inside: 80%; tyre tread left outside: 80%; tyre tread right inside: 80%; tyre tread right outside: 80% Rear axle 4: Twin tyres; max. axle load: 8,000 kg; steered; tyre tread left inside: 80%; tyre tread left outside: 80%; tyre tread right inside: 80%; tyre tread right outside: 80% Rear axle 5: Twin tyres; max. axle load: 8,000 kg; steered; tyre tread left inside: 80%; tyre tread left outside: 80%; tyre tread right inside: 80%; tyre tread right outside: 80% Weights Unladen weight: 15,490 kg Payload: 42,510 kg gross vehicle weight: 58,000 kg = Company Information = For more information: WhatsApp:

Durumu: kullanılmış, toplam ağırlık: 38.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2008, bir sonraki muayene (TÜV): 08/2026, Üretim yılı: 2008,

Durumu: kullanılmış, toplam ağırlık: 39.500 kg, azami yük ağırlığı: 29.720 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2003, Donanım: ABS, Vehicle identification number: W09PG400530M49230 Unladen weight: 9,780 kg Csdpfxsv N Sh Ts Ab Uorh Valid roadworthiness certificate (technical inspection/"HU") required Fifth wheel height: 950 - 980 mm – 2" kingpin, replaceable Maximum front fifth wheel load: 11,500 kg Maximum turntable clearance: 1,790 mm Axle loads: 4 x 7,000 kg BPW Eco axles with drum brakes 2 x self-steering axles 1 x lift axle 4 wheel recesses for wheelbase: 3,020 - 3,550 mm Loading height above center of unit: 800 mm Recess for excavator bucket Rear suspension rails for aluminium ramps (WITHOUT ramps) Portal doors on left and right, each extendable by 550 mm Tyres: 205/65 R 17.5 Modifications, prior sale, and errors are expressly reserved. The description serves for the general identification of the vehicle and does not constitute a warranty in the legal sense. The details provided in the purchase contract shall be binding. Our offer generally does not include a new inspection certificate (TÜV). If a new TÜV inspection is required, we will be happy to provide an offer from one of our partner workshops! The vehicle may carry advertising decals and/or markings. Our general terms of delivery and payment apply.

Durumu: kullanılmış, toplam ağırlık: 26.700 kg, boş ağırlık: 5.780 kg, azami yük ağırlığı: 20.920 kg, dingil konfigürasyonu: 2 dingil, dingil mesafesi: 1.300 mm, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 3.200 mm, ilk tescil: 06/2011, bir sonraki muayene (TÜV): 06/2024, süspansiyon: hava, Üretim yılı: 2011, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German semi-trailer * 1st owner * Special low-bed semi-trailer from premium manufacturer Meusburger * Type MPG-2 * Structure with sliding roof mechanism * This allows for side loading * As well as loading from above and from the rear * Ideal for transporting heavy goods, equipment, construction machinery, vehicles etc. * 21 t payload * 3 x 4.2 t Altec loading ramps * Ramp compartment * Sliding tarpaulin left and right, with Edscha sliding roof system * Platform dimensions: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.90 m * Front platform loading height: 1.60 m * Front platform dimensions: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with heavy-duty DIN lashing rings * Aluminum portal doors * BPW Eco Plus axles * Air suspension with lifting/lowering function * 2 x extendable storage boxes * EBS/ABS * Gross vehicle weight: 26,700 kg * Unladen weight: 5,780 kg * Payload: 20,920 kg If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Cjdpfx Aberkn R Tj Ujrh Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV certifications. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misunderstandings regarding their condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to verify the condition and equipment of the goods/vehicles independently. Subject to change, prior sale, and errors.

Durumu: kullanılmış, toplam ağırlık: 24.200 kg, azami yük ağırlığı: 17.120 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2007, Donanım: ABS, Vehicle ID no.: W09PT300770M49890 Unladen weight: 7,080 kg German MOT (HU) due BPW Eco axles with drum brakes Axle 1: LIFTABLE Axle 3: SELF-STEERING Air suspension Platform dimensions: 7,900 x 2,540 mm - Loading height: 800 mm Total length according to registration: 9,195 - 11,195 mm 2 pairs of wheel recesses incl. extendable cover and loose wooden overlay 2 pairs of wheel recesses including cover between 1st and 2nd axle and between 2nd and 3rd axle Drawbar hydraulically extendable - eyelet 50 mm Hydraulic extension at rear Tyres: 205.65 R 17.5 Spare wheel carrier WITH spare wheel Crjdpfx Aevywlfeb Uoh Modifications, prior sale and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the sense of purchase law. The contractual description in the purchase agreement is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops! The vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, toplam ağırlık: 54.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2015, Donanım: ABS, Vehicle Identification No.: W09TS3011F0M49799 First registration: 16.06.2015 German MOT due Curb weight: 10,380 kg Fifth-wheel load: 24,000 kg – Technical axle load: 10,000 kg King pin: 3.5" (replaceable) – Saddle height: 1,350 mm Front swing clearance: 1,770 mm – Rear: 2,310 mm B-dimension at trailer approx. 11,865 mm — Crane boom platform: 3,655 mm Low bed length: 9,445 mm – Loading height: approx. 560 mm Low bed width: 2,750 mm Cedpfx Aborm Dr Eo Uorh Extendable by 3,500 mm Widenable BPW axles – drum brakes, Air suspension – lifting and lowering function with total travel approx. 200 mm 3rd axle: friction-steered trailing axle with electric and mechanical locking Hydraulic forced steering with power unit mounted on front wall Central lubrication system Tires: 235/75 R 17.5 Specifications subject to change, prior sale, and errors excepted. The description serves for general vehicle identification only and does not constitute a warranty in terms of commercial law. The binding specification is as per the sales contract. Our offer is generally without new TÜV (MOT) inspection. If a new MOT is desired, we will gladly provide a quotation from our partner workshops! The vehicle may be stickered or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, toplam ağırlık: 54.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2015, Donanım: ABS, Vehicle Identification Number: W09TS3011F0M49798 First registration: 26/06/2015 DE roadworthiness inspection due Unladen weight: 10,380 kg Fifth-wheel load: 24,000 kg — Technical axle load: 10,000 kg King pin: 3.5" (interchangeable) — Coupling height: 1,350 mm Swing clearance front: 1,770 mm — rear: 2,310 mm Trailer B-dimension approx. 11,865 mm — Gooseneck platform: 3,655 mm Low bed length: 9,445 mm — Loading height: approx. 560 mm Low bed width: 2,750 mm Extendable by 3,500 mm Widenable BPW axles — Drum brakes Air suspension — Lift and lower function, total lift approx. 200 mm 3rd axle: friction-steered trailing axle with electric and mechanical lock Hydraulic steering with pump unit on front wall Central lubrication system Tyres: 235/75 R 17.5 Modifications, prior sale and errors excepted. The description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is decisive. Our offer does not include a new roadworthiness inspection (TÜV) as standard. If a new TÜV inspection is desired, we will be happy to provide an offer from our partner workshops. The vehicle may bear advertising stickers and/or lettering. Our general terms of delivery and payment apply. Crodpfxermhmuo Ab Ush