Kullanılmış Müller-Mitteltal Müller Schneepflüge Breit 3.60 M satın al (43.393)

Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as Run-on-Ready (RtR) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control panel mounted on trailer as an infotool with pressure sensors for axle load display * 15-pin power socket * LED lighting system 12 / 24V * Rear left removable LED beacon ----General Attachments: * Lateral underrun protection * Front landing gears and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under chassis, right side ----Low Loader Deck: Ljdpfxspk D I Ao Ag Noaa * Fifth-wheel platform with 45° chamfered front corners and toolbox at the front made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminium drop sides (RAL 9010 pure white) on the sides of the fifth-wheel platform, foldable and removable * 150 mm high removable rear drop board * Rear slope on the fifth-wheel platform to the low bed, approx. 700 mm long * Fifth-wheel platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, but not on the rear slope (extension boards included, with storage on the fifth-wheel platform) * Mechanically adjustable warning sign sets front and rear ----Load Securing (Lashing Package): * On the fifth-wheel platform, each 2 x 6.3 t lashing points and 3 x 5 t lashing bars on each side of the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * Each side 2 x 6.4 t lashing eyes and 1 lashing point in the excavator arm recess at the rear * 2 x container locks directly after the step in the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from end of last rigid axle over steering axle to end cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized, hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for future retrofit of hydraulic ramp sliding by customer * Outer plank on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading surface of fifth-wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading surface: approx. 8,500 x 2,520 mm * Unladen deck height approx. 910 mm (incl. 860 mm approach slope) ----Fifth-Wheel Height: * Approx. 1,220 mm (suitable for 2-axle and 3-axle tractor units) ----Painting: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Sample images may show equipment not included on the offer ----Delivery Time: * Available from week 26/2026

Durumu: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency Release Device for Spring-Loaded Cylinders * Drum Brakes ----Axles: * 3 x 11 t BPW Eco Plus Axles * Rear axle with steered trailing axle and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR-valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gear at the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis, right side Ljdpjl Tnvgefx Ag Nsaa ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high side aluminum drop sides (RAL 9010 pure white) foldable and removable on the fifth wheel platform * Rear wall -150 mm- pluggable * Rear slant on the fifth wheel platform to the low bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber flooring and low bed platform with 60 mm timber flooring * Checker plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 meters total width, but not in the rear slant (extension planks available and stored on the platform) * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each, and 3 x 5 t lashing bars per side in the outer frame * On the low bed platform, 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivotable and lowerable, recessed into the outer frame * 2 x 6.4 t lashing points per side, and 1 lashing ring in the excavator arm trough at the rear * 2 x container locks directly after the cranked section in the low bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the rear crossbeam with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for the customer's retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the entry slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l up to 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm entry slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may contain equipment features not included in the offered vehicle ----Delivery Time: * Available from calendar week 26/2026

Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference Number: 11612 * NEW VEHICLE, not yet registered, now available in RAL 9016 traffic white * Door-to-door delivery available for an additional charge! Lodpfsyl Ebpex Ag Noaa * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side boards can swing, fold down, and be removed; prepped for later retrofit side board extensions * Front wall hot-dip galvanized * Lockable compartment under the tipping platform for loading ramp * Includes loading ramps 3.31m, 8t per pair * 4 UVV lashing rings LC 5000 daN at front and rear * 8 recessed, folding lashing eyes LC 3000 daN mounted in the tipper floor (centered) * Net hooks * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye 40mm * Galvanized chassis * Tires: 235/75R 17.5 (x4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on the front wall --- Please request an individual quote from us! Additional equipment options available. Financing from just €405 net for 72 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner" --- Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged. WhatsApp Leasing, financing, and trade-ins possible---

Durumu: kullanılmış, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles! Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Lsdpoi Rk Axefx Ag Noaa

Durumu: kullanılmış, boş ağırlık: 2.910 kg, azami yük ağırlığı: 7.590 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2009, bir sonraki muayene (TÜV): 04/2025, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, side underrun protection, front support, rear support, swinging tailgates Ljdpfx Asv S H Sfsg Noaa Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost of €900.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Durumu: kullanılmış, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Laedpfxeqpgtmj Ag Nsa Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: Ljdspk D Awspfx Ag Noaa * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Durumu: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: Lasdpfx Aepk D Iisg Nja * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2014, Donanım: ABS, Araçla ilgili sorularınız için size Sayın Seidel (telefon) yardımcı olacaktır. MÜLLER MITTELTAL SF32BM/BT Beton Mikser Yarı Römork Üst yapı: Liebherr HTM 1004 10m³, BPW dingiller, kampanalı fren, yay depo sistemi, Wabco ABS, 1. dingil kaldırılabilir, havalı süspansiyon, azami toplam ağırlık: 32.000 kg, boş ağırlık: 6.510 kg, taşıma kapasitesi: 25.490 kg, lastik diş derinliği: 1. dingil 14-15 mm, 2. dingil 10 mm. Talebiniz doğrultusunda size leasing veya finansman teklifi sunabiliriz. Sayın Seidel size memnuniyetle yardımcı olacaktır (telefon). Daha fazla bilgi web sitemizde bulunmaktadır. ... Hatalar, değişiklikler ve ön satış hakkı saklıdır!!! = Ek bilgiler = Ledpfxsyfu Sds Ag Neaa Azami toplam ağırlık: 32.000 kg Dış ölçüler: 0x2500x4000 Daha fazla bilgi için Tobias Ebert ile iletişime geçin.

Durumu: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: Lsdpspk D Dqofx Ag Noaa * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durumu: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye Laedpfxendpn Sj Ag Nja ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system * 15-pin electrical connector ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durumu: kullanılmış, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * Two SAF axles * First axle as lift axle (fully automatic) * Lift axle ride height +30 mm via actuator cylinder * Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12/24V * 2 LED reversing spotlights switched with reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via rear lamp circuit ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable pin towing coupling (use only with underrun protection retracted) * Enclosed plastic half-shell single fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising space ----Hydraulics: * Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023) * Base frame made from high-tensile fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift controlled via remote control * Remote control with quick function for lowering, not for lifting * Emergency stop switches, left and right * Container supports with four pads per side and one roller at the rear on each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 mechanical drop-down supports at the rear * Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open. * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in black * Palfinger hooklift painted in black/yellow ----Infos: * Errors and prior sale excepted * Vehicle is in very good / like-new condition Lasdpfeyfy Rrox Ag Nsa ----Container: Dimensions: * Load length: 5,500 mm * Load width: 2,300 mm * Load height: 1,000 mm Infos: * Mountings for hook systems avail...

Durumu: kullanılmış, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via actuator cylinder * Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Radio remote power supply 12+24 V via tail light ----General Attachments: * BPW landing gear front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Drop-in-pin towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the bulkhead, left side * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side * Enclosed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control Laodpfx Agsx Dp Ats Nea ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of the hooklift device via remote control * Remote control with fast function when unloading but not when loading * Emergency stop buttons on both left and right sides * Container saddle with 4 supports per side and 1 roller at the rear per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durumu: kullanılmış, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles, rated at required tonnage * First axle configured as a lift axle (fully automatic) * Lift axle with ride height +30 mm via control cylinder * Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering via radio remote control ----Drawbar / Flange Towing Eye: * 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load ----Electric / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, actuated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12V + 24V via tail light circuit ----General Attachments: * BPW support winch at the front * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead, left side (direction of travel) * Shovel and broom holder in front of the bulkhead * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right * Enclosed side impact protection, usable as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Main frame constructed from high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift operation controlled by radio remote * Remote with fast function for unloading, but not for loading * Emergency stop switches on both left and right sides Lajdpfxsx Dp Agj Ag Nsa * Container supports: 4 lateral supports per side and 1 rear roller each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 mechanical drop supports at the rear * Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open * Monitoring system for underride guard to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized * Axles, air tank, and front support winch painted in black * Palfinger hooklift painted in black / yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durumu: kullanılmış, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles, rated for high load * First axle configured as lift axle (fully automatic) * Lift axle travel height +30 mm via height-adjustment cylinder * Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flanged Eye: * 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light circuit ----General Equipment: * BPW manual landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel guards * Double access step, front left of the bulkhead * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side * Enclosed side underrun protection, suitable for use as advertising space ----Hydraulics: * Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation) * Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed from high-tensile fine-grained steel * 20,000 kg traction force * Hook height: 1,570 mm * Hooklift controls via radio remote * Quick function available for discharging, not for loading * Emergency stop button on both left and right sides * Container mounts: each side with 4 supports plus 1 rear roller each * Hydraulically operated rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at rear * Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load Laedpfxsx Dp Ame Ag Noa * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves * Monitoring system ensuring underrun protection is retracted before tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized * Axles, air reservoirs, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Information: * Mounting brackets for hook s

Durumu: kullanılmış, azami yük ağırlığı: 14.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2010, bir sonraki muayene (TÜV): 05/2025, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.300 mm, Üretim yılı: 2010, Donanım: ABS, MÜLLER MITTELTAL RA18 Trailer for Hooklift Containers with External Rollers 5,500 mm – 7,000 mm German trailer, 2nd owner Technical Specifications: - Suitable for hooklift containers with external rollers, lengths 5,500–7,000 mm inner length, designed for rear loading. Lajdpfx Agsvg T Nyo Nea Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer frame guides for containers, hot-dip galvanized - Container locking: The container is secured at 4 points by 2 pneumatic transverse locking units. After sliding the container on, the 4 locking claws are closed by actuating a valve, clamping the container to the chassis frame. Additionally secured at the front by 2 locking elements (with empty holders) that can be positioned as needed along the guide path. - 2 x 9-ton BPW 420 mm drum brake axles with air suspension units - Air suspension with lowering function - Frame: welded steel construction - Braking system: Dual-line brakes according to EU regulation EBS - DUOMATIC coupling head - Spring-loaded parking brake - 24 Volt electrical system - Multi-chamber rear lights - 15-pin plug with connection cable - Lighting in line with EU regulations - Rims: factory silver - Underrun protection: aluminium profiles - Wheel chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Transfer/delivery available at additional cost. All information without guarantee! Sale only to businesses or for export! NOTE: PRICE IS NET PLUS VAT Language support: German, Czech, Polish, Romanian, Russian, English WhatsApp: Contact: Josef

Durumu: kullanılmış, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540 STRAIGHT LOAD BED Container Locking System Unladen Weight: 8,000 kg German Inspection (HU): Due Gigant Axles with Drum Brakes Air Suspension Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4 Extendable to 3,000 mm with Lighting Laodpstuhv Rjfx Ag Nja Drawbar – 50 mm Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm Support System Tyres: 235/75 R 17.5 Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract. Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.

Durumu: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Lasdpfx Agsrwc R Ro Nsa * Parabolic springs with compensating unit ----Towing Bar / Flange Towing Eye: * Towing bar height adjustable by 300 mm * Towing bar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrical systems ----General Attachments: * Landing gear at the front * Fold-out rear support legs externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofit container lock fittings * 400 mm screwed flat steel front wall * Bolt-on stanchions at the rear * Drop sides with spring assistors ----Load Securing: * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various drilled holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026

Durumu: kullanılmış, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 Lasdpfel Tlhrox Ag Nja * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durumu: kullanılmış, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes Lajdpjl Th Eyjfx Ag Noa ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Durumu: kullanılmış, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, front right side of chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks in the positions of the central locking mechanism plus 2 on the front bulkhead * Chassis made from fine-grained steel * Steel pallet 3-way tipper superstructure, continuous side panels with internal tube reinforcement – without intermediate posts, folding with drop-side spring lift * Removable bolted rear stanchions Lodpol Th Htofx Ag Nsaa * Combined steel double-wing rear doors, asymmetrically split, can swing and lock up to 270° – not foldable – with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary latch at the rear and central locking, deactivation function for automatic tailgate operation when tipping backwards with open door * Each corner with 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes integrated in the outer frame on each side * 4 mm steel floor plate (fine grain steel) * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable rear compartment under the loading deck, built into the chassis for the ramps * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted in black tone * Tires 285/70 R19.5 * Side board paintwork RAL 9010 pure white * Side wall paintwork available in RAL color of choice at additional cost * Vehicle is registered for one-day registration (never used) * Subject to errors and prior sale * Available immediately ex Egestorf

Durumu: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front landing gear (support winch) * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Pre-installation in front of the bulkhead for retrofitting container locks * 400 mm bolted smooth sheet steel bulkhead * Bolt-on rear stanchions * Sideboards with spring-assisted lifting ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings at 600 mm intervals * One 6.3 t lashing ring in each corner front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail along the central longitudinal axis for lashing up to LC 3000 daN ----Ramps: Ljdpfjrwc R Aex Ag Nsaa * Single-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible down to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 litres/min up to max. 140 litres/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 16/2026

Durumu: kullanılmış, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes Lajdpfx Asl Th Dmog Noa ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Durumu: kullanılmış, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics Ledpfx Ajl Tnu Ajg Nsaa * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Durumu: kullanılmış, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right side at the front of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Screw-fastened underrun protection * Plastic quarter fenders * Net hooks located at the central locking housing and 2 pieces on the front wall * Chassis made of high-tensile fine-grain steel * Steel pallet tri-sided tipping body with continuous side walls reinforced at the top with internal pipes, without middle stakes, foldable with drop-side spring cylinders * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270° (non-drop-down), with additional swing frame for automatic tailgate opening when tipping, rear locking by galvanized rotary latch and central locking, deactivation function for automatic tailgate when tipping backwards with opened wing doors * 1 x 5 t lashing ring in each corner, plus 4 x 3 t lashing points recessed in the outer frame on each side * 4 mm steel floor made from high-tensile fine-grain steel Laedpol Th Duefx Ag Noa * Rear mounting rail for loading ramps * Reinforced superstructure with cargo securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable compartment for ramps, accessible from the rear and recessed under the loading area in the chassis * Chassis, drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R19.5 * Body painted RAL 9010 pure white * Side walls can be painted in any RAL color for an extra charge * Vehicle comes with day registration (without actual use) * Errors and prior sale reserved * Immediately available ex works Egestorf