Kullanılmış Schwarzmüller Tieflader Mit Gekröpftem Plateau satın al (8.297)

Durum: yeni, boş ağırlık: 3.050 kg, azami yük ağırlığı: 9.950 kg, toplam ağırlık: 13.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Each ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing points each 2.5 t, 8 lashing points each 6 t, foldable and removable steel side walls, 50 mm wooden planks, loading area rear end sloped, internal loading width 2,480 mm, removable rear stake, pass-through loading possible at the front, also available with a loading length of 5,300 mm!! Rental price from €550. -- Errors, mistakes, and changes excepted, sample images --, More data at: !, More details: ! Hnsdszc Uzgopfx Ab Esn

Durum: yeni, boş ağırlık: 3.120 kg, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, lastik boyutu: 245 / 70 R 17,5, dingil mesafesi: 990 mm, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245 / 70 R 17,5, arka lastik boyutu: 245 / 70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Each ramp approx. 2,700 mm long x 900 mm wide, ramps with grating surfaces, loading height: 840 mm, 12 lashing rings, each with 2.5 t capacity, 8 lashing rings, each with 6 t capacity, steel sideboards, foldable and removable, 50 mm wooden planks, loading area at rear tapered, internal loading width 2,480 mm, removable rear rack, open front for through-loading, also available with a loading area length of 5,300 mm! Rental price from €500. -- Subject to typographical errors, mistakes, and changes, sample images --. More data available at: !, More Details: ! Hedpfxszbq Hvs Ab Eenn

Durum: ikinci el, azami yük ağırlığı: 84.000 kg, toplam ağırlık: 105.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2000, Donanım: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 HYDRAULIC SUSPENSION – Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg – Axle loads: 6 x 13,000 kg Hnsdpfsx Txllox Ab Eon Unladen weight: 21,000 kg Roadworthiness certificate (RO HU) due Gooseneck length: 3,900 mm Coupling height: 1,350 – 1,450 mm Low bed: Length: 13,550 mm (including 600 mm chamfered) – Width: 3,000 mm – Loading height: 920 mm TELESCOPIC (with sliding table – 500 mm) Hanging rails Technical axle loads: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTING AXLE Axles 2,3,4,5,6 = FORCED STEERING Tyres: 9.5 R 17.5 Modifications, prior sale, and errors are expressly reserved. The description serves for general identification purposes only and does not constitute a warranty as defined by sales law. The condition and scope of delivery are determined exclusively by the purchase contract. Our offer generally excludes new TÜV certification. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. The vehicle may bear advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2014, Donanım: ABS, Vehicle Identification No.: WK0S0003000167818 Curb weight: 10,880 kg German MOT due Gooseneck: 3,500 mm Low-bed: Length: 8,650 mm – Width: 2,520 mm – Loading height: 900 mm Wheel recesses Expandable with extension lighting Spring ramps: 3,000 mm long – 770 mm wide Storage compartment on the gooseneck Front fifth wheel load: max. 18,000 kg Coupling height: approx. 1,250 – 1,300 mm – Kingpin 2" Technical axle loads: 3 x 10,000 kg SAF axles with drum brakes Axle 1 = LIFTABLE Hodsy Rbtgjpfx Ab Eonn Axle 3 = STEERED TRAILING AXLE Tyres: 235/75 R 17.5 Changes, prior sale, and errors expressly reserved. The description serves general vehicle identification and does not constitute a warranty as defined by purchase law. The purchase contract description is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Durum: ikinci el, azami yük ağırlığı: 19.080 kg, toplam ağırlık: 28.480 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2025, bir sonraki muayene (TÜV): 08/2026, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! BPW 10 ton akslar, 2 akslı yönlendirme, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, hidrolik 1400x700 + manuel 700. Hnedpsykgkcofx Ab Een

Durum: ikinci el, azami yük ağırlığı: 16.300 kg, toplam ağırlık: 22.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, load bed length 8,350 mm, Knorr brake system EBS 4s/2k (ASR), rear folding support legs rated at 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings integrated in the outer frame of the platform (8 t), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rolling platform bed, extendable bumper, ramp holder. Hnjdpfx Aeih E Hyjb Een

Durum: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Neck (Gooseneck): * Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN) * Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering Two-piece steel ramps: * One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm Hedpfx Abey Nu Hko Eonn Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 trailing steering axle * Technical axle load: each 12,000 kg * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Colors: * Semi-trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel holder below loading platform, right side in driving direction * 2-inch king pins * Galvanized steel front wall * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3 height wooden boards * Galvanized folding supports beneath the ramped section of the loading area * Height-adjustable tarpaulin structure, approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls) * 3 pairs of sliding stakes on the loading platform * The body can be hydraulically widened rear left/right by approx. 750 mm * Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of body approx. 3,960 mm (loaded) * Driving with an open sliding roof is not permitted and will damage the tarp * Anti-slip sand coating painted onto checker plates on gooseneck and loading platform * Cover plates to bridge the space between ramps and loading platform * Electro-hydraulic unit at the rear under the loading platform * Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket * Ramp control valves positioned on the right side of the trailer * Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm) * Grating cover in the loading platform's sloped section...

Durum: ikinci el, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the equipment list. Complete specification upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading bed * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyre size 205/65 R 17.5, twin-mounted Axles: * BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function * The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually Brake system: * Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 Pure White * Rims in silver Electrical system: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: * 2-inch kingpin * Galvanised steel front wall approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings mounted on the galvanised connection rail at the front * 4 wheel chocks with holders on the front wall * Mountings at the rear of the gooseneck for aluminium loading ramps * Galvanised folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape as per EU regulations at sides, extension, and rear * Mounts for warning plates, left and right on the gooseneck and rear panel, including socket * Mudflap at the rear of the trailer * Manual and documentation on USB stick * European reflective plates (Red-Yellow) at the rear * 80 km/h speed stickers at the rear and both sides * Audible reverse warning signal * Load pressure gauge for axle load determination, including load chart Hnodpfxox Uvlrj Ab Esn

Durum: yeni, azami yük ağırlığı: 32.100 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-axle low bed semi-trailer with ramps, model SDS 470 T Hnodek N Aflepfx Ab Esn Gross weight: 41,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall length: 13,300 mm Loading bed: 9,200 mm Ramps: 2,800 mm x 750 mm with spring assist Air suspension Excavator arm recess Large lashing package 70 mm wooden floor SAF axles, 3rd axle is a self-steering trailing axle plus pre-carriage / handling ex yard Wiesmoor €1,280.00 / net Vehicle is available immediately from stock. Hire purchase offer: 48 months term, 40% residual value, down payment only the VAT. Monthly installment EUR 999.00 (payable net only)

Durum: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500kg Boş ağırlık: 12.060kg Yük kapasitesi: 34.440kg Toplam uzunluk: 13.550mm - 26.550mm Genişlik: 2.550mm Diğer Bilgiler - 3 aks hidrolik zorunlu yönlendirmeli - Üstsadel yönlendirme kıskacı - Rampa askı rayı - Yükleme alanı için takma çıtalar - 2 kat teleskopik, 26.550 mm’ye kadar uzatılabilir - Kuğu boynu üzerinde alet kutusu - E-Tekerlek - Elektrik ön hazırlığı - Hidrolik art yönlendirme fonksiyonu, elektronik uzaktan kumanda - Geniş bağlama paketi Hjdpfxsycpbnj Ab Eenn - Kendi hidrolik pompa ünitesi Diğer yeni ve ikinci el havuzlu yarı römorklar mevcuttur. Daha fazla bilgi için

Durum: ikinci el, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2007, Donanım: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Empty Weight: 11,020 kg German MOT (HU) due Gooseneck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm (King Pin 3.5") Lowbed: Length: 9,400 mm, including sliding table 500 mm (of which 600 mm is chamfered) – Width: 2,525 mm – Loading Height: 880 mm TELESCOPIC EXTENSION: up to 6,300 mm EXTENDABLE WIDTH: up to 3,000 mm Removable side rails Technical axle loads: 4 x 10,000 kg Hsdpfx Absy T Aq Ej Eonn SAF axles with drum brakes Axles 3 and 4: self-steering Large toolbox on gooseneck Central lubrication system Tyres: 245/70 R 17.5 Modifications, prior sale, and errors excepted. The above description is intended for general identification of the vehicle and does not constitute any warranty in the legal sense. The specification in the purchase contract is binding. Our offer is generally without a new TÜV inspection. Should you require a new TÜV approval, we would be happy to provide an offer from our partner workshops! The vehicle may be provided with advertising decals and/or labeling. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, toplam ağırlık: 70.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/1998, Donanım: ABS, Vehicle Identification No.: XL952N5SAWL007036 Fifth wheel load: 20,000 kg – Axle loads: 5 x 10,000 kg Unladen weight: 13,100 kg RO HU due Neck length: 4,100 mm Coupling height: 1,250 mm Hodpfx Aboyx N Dvo Eonn Low bed: Length: 9,200 mm (650 mm of which are chamfered) – Width: 2,525 mm – Loading height: 880 mm Extendable by 6,200 mm Widenable to 3,000 mm Plug-in rails Technical axle loads: 5 x 10,000 kg SAF axles with drum brakes Axles 1, 2 = liftable Axles 5, 6 = self-steering Tyres: 235/75 R 17.5 Modifications, prior sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be fitted with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Durum: yeni, azami yük ağırlığı: 98.290 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * MAX810-Neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulic gooseneck, lift/lower and detachable. Length approx. 3,650 mm * Truck hydraulic connection with flow regulator (20 l/min), * incl. hanging bracket for the supply lines; tractor unit tank must hold at least 80 l, equipped with MAX Trailer couplings; otherwise, couplings to be supplied free issue by the customer. * For tractor unit: 6 x 4 or 8 x 4 Hnedpfxszbfuho Ab Esn Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-eye coupling at the front and rear chamfer of approx. 500 mm x 8°. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling pin. PENDLE AXLE 2-AXLE FRONT CHASSIS PENDLE-AXLE * All axles hydro-mechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-eye coupling front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX centralized lubrication for 2-axle chassis with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDLE AXLE 6-AXLE LOADING PLATFORM PENDLE-AXLE * All axles hydro-mechanically forced steered. * Hose rupture valve on axle equalizing cylinder with automatic RESET function. * Hydraulic cylinders with shut-off valves and pre-insert to secure in raised position. * Technical axle load: each 13,740 kg (30 km/h) * Hydraulic axle equalization. TYRES * 24 x brand at our discretion (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Final coating of axles * Painted in DB7350 Novagrau, solid color, with 2 layers of 2-component paint. * PAINTWORK Complete steel construction sandblasted automatically by shot blast machine after welding. * Second blasting with corundum for optimal adhesion of the coating system. * HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to guarantee optimal corrosion protection. * PAINTWORK Trailer in carmine red (RAL 3002) Including the following accessories * Bracket with winch for spare wheel at the front of the gooseneck. * 3.5-inch kingpin * Steel front wall approx. 400 mm high. * Plug-in aluminium drop sides and rear wall, approx. 400 mm high, anodized finish, for gooseneck. * Operating lever on the gooseneck protected by a foldable cover. * Illuminated operating controls on the gooseneck with on/off switch. * One 7-pole socket left and right rear of the gooseneck for warning board. * Load gauge on the gooseneck to determine axle load at front and rear chassis * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2. * Hydraulic connections from gooseneck to lowbed with threaded couplings. * Access possibility to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm Emission stage: EU Stage V Max. hydraulic pressure: 280 bar Max. flow: 21 l/min Assembly on the gooseneck. * Hydraulic oil tank 100 L frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between power pack and connector plate on the gooseneck. * Radio remote control: * Control of power pack, start/sto

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. Hodjzahp Sspfx Ab Eonn 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raising and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: Hnodpfx Abol Tihxe Esn * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: * Available from week 29 / 2026

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0 – Technical Specifications and Equipment Overview: ---- Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lifting and lowering function ---- Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye; height-adjustable drawbar ---- Lighting / Electrical System: * 15-pole electrical connector * LED lights, 12/24 V Hodpfxeq Dyu Us Ab Eenn * RDÜ tire pressure monitoring system ---- General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Front of bulkhead and rear slope prepped for subsequent installation of container locks for 20" container transport * Version with 21 t GVW, reinforced chassis and axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Front of bulkhead prepped for subsequent installation of container locks * Bolted front wall made of smooth steel sheet * Split side walls made of trapezoidal profiled steel sheet, fold-down with center folding stake * Rear wall made of steel, slidable between the ramps (with storage holder at the front when not in use) * Bolted rear stakes ---- Load Securing: * Perforated outer frame, approx. 45° edge, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * Profifix lashing rail centrally aligned with the longitudinal axis for lashing up to LC 3000 daN * In the front and rear corners, each with 1 x 10 t lashing ring * Load securing package (Lasi-Paket): on each side, 2 x 8 t retractable lashing rings in the outer frame; various bores in the front wall and end cross member for 1.2 t lashing points ---- Ramps: * One-piece mechanical steel grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm (chassis) ---- Loading Heights: * Unladen: approx. 940 mm * Laden: approx. 910 mm ---- Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75 R17.5 ---- Paintwork: * Side wall paintwork in a custom RAL color shade (special or metallic paint not available); amendable up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black ---- Additional Information: * New vehicle with manufacturer’s warranty * Subject to alterations and prior sale * Sample images ---- Delivery Time: * Available from calendar week 29 / 2026

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: Hodpfxoq Ra D Eo Ab Ejnn * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Hnjdpfx Absrvvfwj Esn * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, on the front wall exterior ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading area length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Provision at the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal steel side walls with fold-down spring-assisted gates * Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to fit 3 t drop lashing brackets every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps * Side wall paintwork in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * available from calendar week

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: Hsdpfx Abol Th Hwj Eonn ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted Hnsdspk D D Hjpfx Ab Eon ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brake System: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs -110 mm wide- with tandem compensation unit ----Drawbar / Flange eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * Rear fold-out supports (external) * Lateral underrun protection * Quarter plastic mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall Hnsdpfx Absl Th Hlj Ejn * Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism * Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points * Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised * Drop sides painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * Axles, springs, air tanks, flange towing eye and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Fittings: * Jost landing gear at front * Fold-out stabilizer legs at rear * Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black) * Side underrun protection Hodpfepk D Ncjx Ab Eonn * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of the front wall for later installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift * Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a shade of black * Sideboard panels painted RAL 9010 pure white * Painting of side walls in other RAL color available for surcharge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Equipment excerpt. Full equipment details available upon request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Tyres: * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system pursuant to ECE R 141 Axles: * BPW axles, two rigid axles, two steering axles * Air suspension with lifting/lowering feature * Drum brakes * Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Brake system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash synchronously with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Wheels Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket * 2-inch king pin * Galvanized steel bulkhead * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder mounted on the bulkhead * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Mount for beacon at the rear of the trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall) * 3 pairs of sliding stanchions in the loading area Hnsdpfx Aboy Aug Do Een * The body can be hydraulically widened at the rear to the left and right by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear of the body with closed anodized ALU swing doors * Hook-in rail for ALU drive-on ramps at the rear of the vehicle * Control valves for hydraulic body widening mounted on the right trailer side * White reflective tape in accordance with EU regulations, red tape at the rear * Electro-hydraulic unit mounted at rear under loading area * Mud flaps at the rear of the trailer * European reflective warning signs (red-yellow) at the rear of the tr

Durum: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN) * Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Tyres: * Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data. Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection strip * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit) * Attachment bar for ALU loading ramps on gooseneck with integrated impact protection * At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket * Holder for a beacon at the rear of the trailer * Galvanized foldable supports under the rear bevel of the loading area * 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN) * Axle load gauge with load diagram * On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection * On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized... Hnedpfx Ajy Auifsb Een

Durum: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 500 mm x 8° * 8 pairs of foldable lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Two-section steel ramps: * One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering * Ramp with hydraulically folding ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes * Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: Hnedpfjy Augwox Ab Ejn * Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data. Landing legs: * JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot blasted after welding using a wheel blast system * Second blasting using corundum for optimal adhesion of paint system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL * Rear section metallized and painted in RAL 9010 pure white Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings at the galvanized front connector panel * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the platform’s rear bevel * Super Grip rubber ma