İkinci El Faymonville 3-A-Semi-Ladebo.-Abklappba.-Heck-Hilfsle Satın Al (64.581)

Durum: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with a 1,000 mm x 6° taper - Suitable for tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform, approx. 9,700 mm in length, with hydraulically folding and lowering rear, as well as hydraulically raisable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering - 3rd axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electro-hydraulic auxiliary steering for the self-steering axle of a 3-axle assembly - Automatic control of the trailing steering axle during reversing via gyroscope sensor - Manual steering operation in forward and reverse via separate wireless remote control Dedpeyw Sakefx Abvoku - Manual operation enabled up to 10 km/h - System powered by a separate electro-hydraulic unit Accessories Included: - Removable steel headboard, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every approx. 400 mm - Additional mounting hole at the rear upper section of the outer beams for a bolted lashing ring - Grating platform with 5 mm sheet metal reinforcement on gooseneck and rear taper - 2" kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) - 1 pair of removable, anodized ALU side walls on the gooseneck, approx. 400 mm high - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - Winch mounting located at the front inside the gooseneck - Continuous grating floor with 5 mm sheet base as additional reinforcement, rated for point load: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted anti-slip sand coating on the gooseneck’s cover plates, as well as in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, loadable in raised driving position: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cut-outs in the outer frame of the platform and the lift bed for attaching tension belts - Extensive lashing points - Hydraulic rear section can be lowered for loading/unloading and raised to reduce total train length - Loadable in driving operation in horizontal position: 10,000 kg - Reduction of overall train length when raised: 2,350 mm - Painted anti-slip sand coating on the entire ramp, except for the extendable galvanized ramp section - Hydraulically extendable rear extensions for loading/unloading - Wireless remote: - Operation of hydraulic lift bed - Operation of hydraulic lifting device for rear extension - Operation of hydraulic extension for rear extension - 1st axle with traction assist - Central lubrication system with 1 pump - 4 warning panels, approx. 423 x 423 mm, extendable

Durum: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approximately 3,700 mm long; rear chamfer approx. 1,000 mm x 6° - Suitable for tractor units: 4 x 2 and 6 x 2 configurations Loading Platform: - Platform length approximately 9,700 mm with hydraulically folding rear section, and front section can be raised hydraulically to facilitate driving onto the gooseneck Axles and Tires: - BPW axles and suspension, first and second axles rigid, third axle steered - Third axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - Plug-in steel front wall, approx. 400 mm high - Yellow-red air couplings at the front connector strip - 3 kW electro-hydraulic unit for controlling hydraulic functions (except hydraulic winches) - Outer beams on the gooseneck with pre-drilled holes for bolt-on lashing rings - First hole approx. 200 mm from the front, subsequent holes every 400 mm - 2 pairs of screw-in lashing rings included - Mounting hole in the upper rear section of the gooseneck’s outer beams for a bolt-on lashing ring - Grating with 5 mm plate reinforcement on the gooseneck and the rear chamfer - 2" king pin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) - On the gooseneck, 1 pair of detachable ALU side walls, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, cable Ø approx. 9.5 mm, with cable pressure roller - Winch mounted at the front on the inside of the gooseneck - Plastic tarpaulin cover for the winch - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B - static test load = 50,000 kg - Continuous grating with 5 mm steel plate substrate as additional reinforcement, designed for point loads: - on the lift bed - on the platform - on the hydraulically lowerable rear section - Painted-on anti-slip sand coating on the cover plates of the gooseneck and in transition areas (gooseneck to lift bed, lift bed to platform, platform to ramps) - 1 spare wheel with mounting adapter under the platform to the right, in front of the axles - Hydraulic lift bed, approx. 2,500 mm long, max. load in raised position during transit: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cutouts in the outer frame of the platform and lift bed for attaching tension belts - Extensive lashing positions - Hydraulically lowerable rear section for loading/unloading, as well as raisable to shorten total vehicle length - Load capacity during transit in horizontal position: 10,000 kg - Reduction in overall train length when raised: 2,350 mm - Painted-on anti-slip sand coating on the complete ramp, except for the extendable galvanized segment - Hydraulically extendable rear ramp extensions for loading/unloading - Radio remote control: Dedpfx Absyw R Srevjku - Operation of hydraulic lift bed - Operation of hydraulic system for ramp extension - Operation of hydraulic extension of rear ramp - 1st axle with traction aid - Central lubrication system with 1 pump - 4 extendable warning panels, approx. 423 x 423 mm each

Durum: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper Dsdpjrvw U Sofx Abveku • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Durum: ikinci el, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, toplam uzunluk: 12.290 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.100 mm, Üretim yılı: 2008, Almanca bilgiler: Ek bilgiler: * Tip | Birinci aks: Continental R * Lastik boyutu | Birinci aks: 445/45 R19.5 * Lastik diş derinliği (iç sol) | Birinci aks: %30 * Lastik diş derinliği (iç sağ) | Birinci aks: %30 * Maksimum aks yükü | Birinci aks: 9000 kg * Tip | İkinci aks: Continental R * Tip | Üçüncü aks: Continental R * Lastik boyutu | İkinci aks: 445/45 R19.5 * Lastik boyutu | Üçüncü aks: 445/45 R19.5 * Lastik diş derinliği (iç sol) | İkinci aks: %30 * Lastik diş derinliği (iç sol) | Üçüncü aks: %30 * Lastik diş derinliği (iç sağ) | İkinci aks: %30 * Lastik diş derinliği (iç sağ) | Üçüncü aks: %30 * Maksimum aks yükü | İkinci aks: 9000 kg * Maksimum aks yükü | Üçüncü aks: 9000 kg * Konum | Birinci aks: Arka * Marka | Birinci aks: Diğer * Fren tipi | Birinci aks: Disk frenler * Süspansiyon | Birinci aks: Hava süspansiyonu * Kaldırma aksı | Birinci aks: Evet * Konum | İkinci aks: Arka * Konum | Üçüncü aks: Arka * Marka | İkinci aks: Diğer * Marka | Üçüncü aks: Diğer * Fren tipi | İkinci aks: Disk frenler * Fren tipi | Üçüncü aks: Disk frenler * Süspansiyon | İkinci aks: Hava süspansiyonu * Süspansiyon | Üçüncü aks: Hava süspansiyonu Ek özellikler: * Merkezi yağlama * Ana sayfa * Direksiyon aksı * Kaldırma aksı * SemCollection Semtrade B.V. Dksdpjz E Ubzofx Abveu İletişim | Martin Klaaijsen | Tel: | Whatsapp: | E-posta: İhracat maliyetleri | Lütfen ülkeniz için geçerli olan maliyetler ve prosedürler hakkında önceden bilgi alın. Konum | Maasdijk (NL) | Alman sınırına 140 km | Rotterdam The Hague Havalimanı'na 20 km Yasal Uyarı: Değişiklikler, ön satış ve hatalar mahfuzdur. ---- İngilizce bilgiler: Ek bilgiler: * Type | First axle: Continental R * Tyresize | First axle: 445/45 R19.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Max load | First axle: 9000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R * Tyresize | Second axle: 445/45 R19.5 * Tyresize | Third axle: 445/45 R19.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Max load | Second axle: 9000 kg * Max load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lifting | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Ek özellikler: * Central lubrication * Homepage * Liftaxle * SemCollection * Steering axle Semtrade B.V. İletişim | Martin Klaaijsen | Tel: | Whatsapp: | E-posta: İhracat maliyetleri | Lütfen ülkeniz için geçerli olan oranlar için bizimle iletişime geçin. Konum | Maasdijk (NL) | Alman sınırına 140 km | Rotterdam The Hague Havalimanı'na 20 km Yasal Uyarı: Fiyatlar ve stok durumu önceden bildirimde bulunulmadan değişebilir. ---- Bildirilen fiyatlar, BPM (Motorlu Taşıtlar Vergisi) hariçtir ve yalnızca ihracat için geçerlidir.

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 10.320 kg, azami yük ağırlığı: 34.680 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2005, Üretici: Faymnonville Tip: ILO 3 / 3 Akslı Dkodpfoz D Dvlox Abvsu Üretim Yılı: 2005 Boş Ağırlık: 10.320 kg Yük Kapasitesi: 34.680 kg Toplam Ağırlık: 42.000 kg Uzunluk: 13,30 m

Durum: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin Dodpfouadk Nox Abveku - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Durum: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: Djdpfx Ajya E A Nsbvjku - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Durum: ikinci el, ilk tescil: 02/2004, renk: diğer, Üretim yılı: 2004, Plaka: QAAB135 Dkjdpfx Abszvan Rsvju

Durum: ikinci el, makine/araç numarası: 202xxxx, Üretim yılı: 2002, Lütfen talep üzerine referans numarasını belirtin: 23156 Özellikler: Model 2002 AB onaylı değil Son AB onayı: 19.09.2024 Arızalar ve kusurlar Tamir gerektiren ürün Lastikler (resimlere bakın) 3. aks üzerinde yönlendirme yok Teslimata hazır Açıklama: Satışa sunduğumuz 2002 model, 3 akslı ve damperli yarı römorklu Maur kamyon kasası, tamir gerektiren bir üründür. AB onaylı olmadığı ve arızalar ve kusurlar bulunduğu için tamir gerektiren bir ürün olarak satılmaktadır. Herhangi bir garanti olmaksızın, mevcut haliyle satılmaktadır. Ek maliyetler oluşabilir. Teslimata hazır. TÜV: Yok AB onay geçerlilik tarihi: 19.09.2024 Boş ağırlık: 11650 Toplam ağırlık: 46000 Yük kapasitesi: 34350 Genişlik: 255 Uzunluk: 1095 Model: 3 akslı damperli yarı römorklu kamyon kasası, tamir gerektiren ürün Dkodpfxezqnf Ho Abvsu = Ek Bilgiler = Daha fazla bilgi için ATS Norway ile iletişime geçin.

Durum: ikinci el, makine/araç numarası: W09STLB3NCEN1xxxx, Üretim yılı: 2012, Please quote reference number: 22956 Technical data: Year of manufacture: 2012 Steerable third axle Liftable first axle Good tyres (see pictures) Lower deck length: 9.50 m Upper deck length: 4 m Brakes in good condition Newly painted Unladen weight: 8,910 kg Gross vehicle weight: 50,000 kg Available immediately Description: HRD Jumbo semi-trailer, 3 axles, year of manufacture 2012. Dsdpszqqrpefx Abvjku According to the owner, the brakes are in good condition. Available immediately. TÜV: Yes EU approved until: 06.05.2027 Curb weight: 8,910 kg Total weight: 50,000 kg Model: Jumbo semi-trailer, 3 axles = Further information = Please contact ATS Norway for further information.

Durum: ikinci el, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2013, Üretim yılı: 2013, Donanım: ABS, * Faymonville F-S43-1ABA Düşük Yataklı Römork * İlk Kayıt Tarihi: 03-2013 * Hidrolik Süspansiyonlu * Hidrolik olarak hareket ettirilebilen çift katlanabilir destek ayağı * Uzaktan kumandalı halatlı vinç dahil * 3. Aks, yönlendirme mekanizmalı * SAF akslar * Hava süspansiyonlu * Tamburlu fren * Azami Yük Kapasitesi: 10.900 kg * Toplam Ağırlık: 31.100 kg * İzin Verilen Toplam Ağırlık: 42.000 kg * Lastikler: 235 / 75 R 17,5 * Daha fazla resim ve video WhatsApp üzerinden gönderilecektir. * Bilgiler bağlayıcı değildir ve ön satış hakkı saklıdır. Dodpfx Ajzq Nupobvjku

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2007, süspansiyon: hava, Üretim yılı: 2007, Donanım: ABS, = Ek Seçenekler ve Aksesuarlar = - EBS - Kaldırma aksı - Hava süspansiyonu = Ek Bilgiler = Süspansiyon: Hava süspansiyonu Arka aks 1: Direksiyonlu Arka aks 2: Direksiyonlu Arka aks 3: Direksiyonlu Boş ağırlık: 12.940 kg Yük kapasitesi: 21.060 kg Toplam ağırlık: 34.000 kg Teknik durumu: iyi Görsel durumu: iyi Araç numarası: Düşük platformlu: 15 Faymonvill / 3 akslı, direksiyonlu, uzaktan kumandalı SAF / Uzatılabilir .: YA9TL35F02113453 SAF 3 x direksiyonlu aks, uzaktan kumandalı Boş ağırlık: 12490 Toplam ağırlık: 34000 Uzunluk: 9.20 m, uzatma ile 15.10 m + uzatma ile 20.40 m, toplam uzunluk 24.40 m Genişlik: m = Şirket Bilgileri = Baskı ve yazım hataları, değişiklikler, ön satış ve hatalar için sorumluluk kabul edilmez! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobil: Bayan Sabine Faust E-posta: Dkedpjzvzt Ijfx Abvju

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding Djdpfx Aeunrapebvoku - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 8.500 kg, azami yük ağırlığı: 40.500 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass Dodpfx Abswu Agijvoku - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durum: ikinci el, makine/araç numarası: ***XL931N5GC6L007092, ilk tescil: 01/2006, lastik boyutu: 285/70 R19.5, dingil konfigürasyonu: 3 dingil, renk: diğer, süspansiyon: hava, toplam uzunluk: 12.400 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.350 mm, Üretim yılı: 2006, Chassis Diameter of coupling pin / fifth wheel: 2 inches Height of coupling pin / drawbar: 145 cm Structure Platform: ✓ Platform size: 880x250 cm Special transport Dkodeu H A R Rspfx Abvsu Hydraulic ramps: ✓ Length over axles: 880 cm Length of loading floor: 880 cm Length of ramps: 255 cm Gooseneck length: 315 cm Low loader: ✓ Maximum width: 300 cm Maximum length: 880 cm Extendable: ✓ Adjustable ramps: ✓ Tank Fuel: ✓ = Additional information = Tyre size: 285/70 R19.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left outer: 95%; Tyre tread right outer: 95% Axle 2: Twin tyres; Tyre tread left outer: 95%; Tyre tread right outer: 95% Axle 3: Twin tyres; Steering; Tyre tread left outer: 95%; Tyre tread right outer: 95% Gross vehicle weight: 16,777,215 kg Loading platform height: 95 cm = Company information = For more information on this unit please call: or email: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform Djdpeuqlmnefx Abveku - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: ikinci el, makine/araç numarası: XNJ31N5S614L0xxxx, Üretim yılı: 2015, Lütfen talebinizde referans numarasını belirtiniz: 23644 Teknik Özellikler: Model: 2015 Satıştan önce AB onaylı olacak Son AB onayı geçerlilik tarihi: 24.02.2026 3 aks Lastikler (fotoğraflara bakınız) Dodpfx Aozqm R Isbvoku 6 metre uzatma Platform 1: 4,109 m Platform 2: 4,214 m Platform 3: 4,765 m Bağlama noktaları Direk yuvaları Arka lambalar Teslimata hazır Açıklama: Satılık 6 m uzatmalı, 2015 model 3 akslı Broshuis alçak yataklı yarı römorkumuz vardır. Römork satıştan önce AB onaylı olarak teslim edilecek ve sahibi tarafından düzgün çalıştığı belirtilmiştir. Teslimata hazır. TÜV: Hayır AB onaylı geçerlilik tarihi: 24.02.2026 Boş ağırlık: 13.200 kg Toplam ağırlık: 50.000 kg Yük kapasitesi: 36.800 kg Genişlik: 255 cm Uzunluk: 1.334 cm Model: 3 akslı, 6 m uzatmalı bröwen semi = Ek Bilgi = Daha fazla bilgi için lütfen ATS Norway ile iletişime geçiniz.

Durum: ikinci el, makine/araç numarası: YX9SET3460801xxxx, Üretim yılı: 2010, Talep üzerine lütfen referans numarasını belirtin: 23157 Özellikler: Model: 2010 AB onaylı değil Son AB onayı geçerlilik tarihi: 28.04.2025 Onarılacak araç Lastikler (resimlere bakın) Bir aks üzerinde kaldıraç 3 aks üzerinde destekleyici dönüş Arka lamba Teslimata hazır Açıklama: 2010 model bir Maur kamyon üst yapısı ve 3 akslı bir damperli yarı römork, onarılacak araç olarak satılıktır. AB onaylı olmadığı ve arızaları ile kusurları bulunduğu için onarılacak araç olarak satılmaktadır. Tekrar kullanılabilir hale getirmek için maliyet gerekecektir. Teslimata hazır. Kilometre: 1 TUV: Hayır AB onay geçerlilik tarihi: 28.04.2025 Boş ağırlık: 11570 Toplam ağırlık: 46000 Yük kapasitesi: 34430 Genişlik: 255 Uzunluk: 1120 Dkodpfxozqnc Sj Abvsu Model: Bilpåbygg 3 akslı damperli yarı römork, onarılacak araç = Daha fazla bilgi = Daha fazla bilgi için ATS Norway ile iletişime geçin.

Durum: ikinci el, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2026, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: gri, Üretim yılı: 2026, Donanım: ABS, Sabit, orta boru tasarımlı kuğu boynu: - Ön köşeler 90° - Germe kayışı için kesiklerle kapalı dış çerçeve - Alüminyum yükleme rampaları için delikli şerit - 2" - Kral pimi - Sürüş yönünde sağda mekanik olarak çalışan BPW destek ayakları - Kuğu boynu sonunda 550 mm uzunluğunda, 8° eğim - Kuğu boynu platformunda gömülü 3 çift yük sabitleme halkası - Kuğu boynu platformunda 100 x 50 mm boyutunda 2 çift kazık yuvası Yükleme alanı: - Germe kayışı için kesikli, kapalı dış çerçeve - Ön sabit bölüm 360 mm - Kaymaz kaplamalı sac zemin - Yük emniyeti için uzun delikli ekskavatör çukuru - 1. dingil önünde sabit monte edilmiş, 390 mm derinliğinde, eğimde tırmanma çıtalı 1 çift tekerlek çukuru - 1. ve 2. dingil arasında sabit monte edilmiş, 390 mm derinliğinde, eğimde tırmanma çıtalı 1 çift tekerlek çukuru - 3.740 mm teknik maksimum uzatma - "Premium" alüminyum tekerlek çukuru kapakları, 600 mm tam genişlikte, 3.000 mm'ye kadar genişletilebilir, 8 t teker yükü - Kapak kullanımıyla farklı teker çukuru derinlikleri (yaklaşık 390 mm ve 260 mm) - 8° eğimli ve 550 mm uzunluğunda arka uç - Rampaların kolay montajı/sökümü için kızaklı yapı - Yükleme sırasında destek için mekanik, yay destekli konforlu destek ayakları - Arka kısımda tam boy çamur koruyucu - Yükleme alanı başlangıcında ortada 1 çift 10.000 daN yükleme noktası - Yükleme alanı arka bölümünde ortada 1 çift 10.000 daN yükleme noktası - Yükleme alanı dış çerçevesinde 7 çift 10.000 daN yükleme noktası Dedpfx Aozdzunjbvsku 3 akslı şasi: - BPW ECO Max marka, havalı süspansiyonlu aks - 245/70 R17.5 çift lastikli, 12 t aks kapasitesi - Jant üzeri lastik basınç sensörlü Lastik Basıncı İzleme Sistemi (RDKS) - 2x hidrolik zorunlu yönlendirmeli aks ve 1x sabit aks - Knorr marka (AB yönetmeliklerine uygun, EBS-E) fren sistemi - Knorr TIM G2 (Treyler Bilgi Modülü) - RSS (Devrilme Stabilite Desteği) - Standart ikinci yükseklik 895 mm (-100/+100) - Yönlendirme kontrolü; kablosuz uzaktan kumanda veya kuğu boynundaki düğme ile, tek izleme fonksiyonu dahil - 1. aks üzerinde yük bağımlı kaldırma aksı ve ilk kalkış yardımı (Zorunlu aks indirme fonksiyonu TIM üzerinden mümkün) 2 parçalı rampalar: - LxG 4.300 x 800 mm - 38t taşıma kapasitesi; zeminde ladin ağacı kaplama - Taşıma pozisyonunda güvenlik için rampanın kaldırma silindirinde entegre mekanik kilitleme - Rampa işlemleri: kaldırma ve yana kaydırma hidrolik - Uzaktan kumanda hem yönlendirme hem de arka fonksiyonları kontrol edebilir - Rampa kullanımı için elektro-hidrolik ünite Dahil olan aksesuarlar: - Arka duvar için park yeri dahil, yaklaşık 400 mm yüksekliğinde ön duvar - Kuğu boynu önünde dik yedek lastik tutucu, yedek lastik dahil - Takozlar ve tutucuları - 3.000 mm’ye kadar genişletme için traversler - 400 mm yüksekliğinde alüminyum takma yan paneller, 2x yan panel (yaklaşık 3.150 mm uzunluğunda) ve rünlü, galvanizli arka panel - 2 çift 423 mm x 423 mm uyarı levhası, 2 konum lambası ve uyarı lambası için soket yeriyle - Ekskavatör çukuru sonunda takılabilir bir bent sacı - Traffideckgo kauçuk kaplama, yükleme alanı dış bölümünde 8 mm yükseklikte, arka eğim dahil, ön sabit bölüm hariç, kumlamalı - Arka eğimde yan tırmanma çıtaları - Arkada kırmızı kontur işareti - Yanda beyaz kontur işareti - Merkezi yağlama sistemi (yönlendirme ve şasi)

Durum: ikinci el, makine/araç numarası: ***XMROVB00090000123, dingil konfigürasyonu: > 3 aks, ilk tescil: 01/2009, toplam uzunluk: 16.750 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2009, Chassis King Pin Diameter / Fifth Wheel: 2 inch Structure Coupling Height: 120 cm Special Transport Length Over Axles: 1185 cm Loading Floor Length: 1185 cm Gooseneck Length: 420 cm Low Loader: ✓ Maximum Width: 250 cm Maximum Length: 4315 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle Configuration Tyre Size: 245/70 R17.5 Axle Manufacturer: BPW Eco Brakes: Drum Brakes Suspension: Air Suspension Axle 1: Twin Tyres; Steering; Left Outer Tyre Tread: 30%; Right Outer Tyre Tread: 35% Axle 2: Twin Tyres; Steering; Left Outer Tyre Tread: 60%; Right Outer Tyre Tread: 60% Axle 3: Twin Tyres; Steering; Left Outer Tyre Tread: 55%; Right Outer Tyre Tread: 65% Axle 4: Twin Tyres; Steering; Left Outer Tyre Tread: 40%; Right Outer Tyre Tread: 30% Weights Gross Vehicle Weight (GVW): 65,000 kg Functional Body Manufacturer: Nooteboom Loading Platform Height: 125 cm = Company Information = Dkjdpfsu H Itqox Abvsu For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, Üretim yılı: 2013, Please quote reference number upon request: 22822 Specifications: Model Year: 2013 Lower deck length: approx. 9 meters Upper deck length: approx. 5 meters Air bellows and air suspension bellows replaced Brakes replaced (Pun: Vultures before their prey) 3rd axle can be lifted (just a joke). Air suspension on first axle Access ramps included Inserts not included Chains on board our vehicle are not included. Tires (see pictures) Ready for delivery Description: 2013 Broshuis E2190/27 tri-axle semi-trailer with driven axles. All air bellows, suspension bellows, landing legs, rail clamps (front) and air bells have been replaced. The brakes are new. The rear rocker is a bit stiff; according to the owner, greasing may be sufficient. Ready for delivery. TÜV: Yes EU approved until: 12.11.2026 Dkjdpozqpkdsfx Abveu Curb weight: 1 Model: E2190/27 3-axle semi-trailer with drive-on ramps = More information = Please contact ATS Norway for further information.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/1997, yükleme alanı uzunluğu: 16.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 850 mm, Üretim yılı: 1997, Donanım: ABS, FAYMONVILLE ALÇAK ŞASİ / UZATILABİLİR / ÇEKİCİ RÖMORK / DİREKSİYONLU AKSLAR / VİNÇ MODEL: STN-3A AZAMİ YÜK: 38.000 KG BOŞ AĞIRLIK: 9.300 KG 3 AKS SAF AKSLAR DİREKSİYONLU AKSLAR VİNÇ YAPRAYAY SÜSPANSİYON YERDEN YÜKSEKLİK: 0,85 M KÖPRÜ YÜKSEKLİĞİ: 1,35 M RÖMORK UZUNLUĞU (KAPALI): 13,2 M RÖMORK UZUNLUĞU (AÇIK): 16,8 M YÜKLEME GENİŞLİĞİ: 2,55 M KÖPRÜ UZUNLUĞU: 4 M LASTİKLER: 235/75 R17.5 İTHAL EDİLDİ ÜLKEDE KULLANILMAMIŞ %100 KAZASIZ NET FİYAT: 16.900 EUR Djdpfx Abjybn Iwjvsku FİRMAMIZIN TAM TEKLİFİ WEB SİTEMİZDE: DETAYLI FOTOĞRAF VE VİDEO WHATSAPP, VIBER VEYA E-POSTA ADRESİNİZE GÖNDERİLEBİLİR. DAHA FAZLA BİLGİ İÇİN LÜTFEN TELEFONLA İLETİŞİME GEÇİN. AŞAĞIDAKİ DİLLERDE HİZMET VERMEKTEYİZ: Lehçe, İngilizce, Almanca, Rumence, İspanyolca, İtalyanca, Fransızca, Türkçe, Macarca, Slovakça, Slovence, Çekçe ve diğerleri

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Dksdpfxjup U Hzj Abvou Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting Djdjwviwkepfx Abvoku - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durum: ikinci el, Üretim yılı: 1976, çalışma saatleri: 9.350 h, Please quote reference number upon request: 22908 Specifications: Model year: 1976 Operating hours: approx. 9350 Weight: approx. 50 tons S-blade cutter Kelly ripper Djdpfeyz Nqbox Abvoku Chassis: see photos Track width: 68 cm Broken window Rust Coolant leak Ready for delivery Description: Komatsu D355-3 A dozer with ripper and blade, year of manufacture 1976. The machine has not been started in several years, but the owner states he will get it running again. The owner also states there is a minor coolant leak. Ready for delivery. Operating hours: 9350 Net weight: 50000 kg Total weight: 50000 kg Model: D355-3 A dozer with ripper and blade = More information = Intended use: Construction Drive: Track Contact ATS Norway for more information.