Kullanılmış Faymonville F-S42-2Acb Pendel-X 5.5 Meter Extandable! satın al (48.407)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Legden
2.617 km
Alçak şasi dorse
FAYMONVILLEMULTIMAX 4.Achs Tieflader / REMORQUE/ AGGREGAT/
Ara
Durum: ikinci el, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2021, toplam genişlik: 3.000 mm, toplam yükseklik: 3.760 mm, Donanım: ABS, * Own hydraulic unit
* Hydraulically movable loading ramps
* 4 hydraulic auxiliary supports
* Hydraulically extendable low-bed (3000 mm)
* Extendable loading platform (500 mm)
* AXION radio system with remote control
* Gooseneck with side walls & storage box
* Hydraulically steered axles
Gbodpfx Ajzbw N Reqton
----* Wabco Trailer EBS-E
* SAF axles with drum brakes
* Wabco SmartBoard unit
* Height-adjustable low-bed
* Reversing camera
* Telematics
----The following work was carried out by ES-GE Nutzfahrzeuge in February: * Brake drums, brake shoes & linings, brake cams, bushings & slack adjusters renewed on all 4 axles
* Tie rod ends replaced
* Suspension of the steering knuckles on TwinAxle II replaced
* Electrical lighting system serviced
* Hydraulic accumulator replaced
* EBS repaired
* Electric pump checked
* High-pressure oil and filter replaced
* Checked axle play
* Central lubrication system checked
* Suspension levers serviced
* Sensors for height adjustment serviced
* Distribution box at the front serviced
* Wooden floor repaired
* Protective covers repaired
* Air reservoir newly fastened
* Wheel bearings checked
----* Tire size: 245/70R17.5
* Gross vehicle weight: 73,000 kg
* Unladen weight: 14,600 kg
* Total length: 13,200 - 16,200 mm
* Total width: 2,540 - 3,000 mm
* Mileage: 194,000 km
* Next SP inspection due: 09.2026
----Vehicle number: 12154----Subject to errors and prior sale----Advertising and various lettering digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle
TÜV/SP inspection
Complete export processing
Financing arrangements
Application for export license plates
Vehicle transfer
Vehicle registration
Recovery and vehicle transport----
YOUR VTS TEAM
Küçük ilan
Bremen
2.551 km
Alçak şasi dorse
FaymonvilleMegamax 2-Achs Tiefbett
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, Üretim yılı: 2022, Faymonville 2-axle low bed trailer MEGAMAX 2x12 t PA
2 steered axles
Single telescopic, 2 x 12 t pendle axles
Overall length: approx. 13,500 mm
Overall width: approx. 2,550 mm
Neck width: approx. 2,480 mm
Load bed width: approx. 2,550 mm
Godpoy Hxd Isfx Aqtsbn
Chassis width: approx. 2,550 mm
Technical extension (telescopic): approx. 4,700 mm
Fifth wheel height (laden): approx. 1,205 mm
Loading height (max. laden): approx. 1,005 mm
Load area length: approx. 6,850 mm
Chassis length: approx. 2,600 mm
Fifth wheel offset: approx. 1,200 mm
Swing clearance radius tractor unit (rear): approx. 2,300 mm
Swing clearance radius (front): approx. 1,800 mm
Axle spacings: approx. 1,360 mm
Gooseneck:
- SNT-designed gooseneck for optimized loading area length, length approx. 3,750 mm
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
Bridge:
- Extra-low 'SUPER LOW' design as an extendable vessel bridge
- Length approx. 6,850 mm, with mechanical locking
Rear chassis:
- Rear chassis with closed outer frame, chequer plate and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at rear
- PENDLE-AXLE, all axles hydro-mechanically forced steered
- Hose rupture valve on axle compensation cylinder with automated RESET function
- Hydraulic cylinder with shut-off cocks and safety plugs for securing in raised position
- Technical axle load: 12,000 kg each
- Hydraulic axle compensation
Brake system:
- WABCO braking system, EBS-E in accordance with regulations
Chassis tyres:
- 245/70 R 17.5 3PMS
Metallisation:
- Complete HRM metallisation (High Resistance Metallisation)
- Complete steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%)
Coating:
- 6-coat finish
- Complete steel construction shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final painting with 2 layers of 2-pack paint (acrylic), single colour, then cavity sealing with special wax
- Trailer colour: RAL 3002 Carmine Red
- Rim colour: Silver grey
- Drop side colour: Natural aluminium
Steel construction:
- Steel construction made from high-strength fine-grained steels.
- Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690Q/S700MC (yield strength 690 MPa)
- MAG welding process according to EN ISO 4063
Küçük ilan
ANDELST
2.692 km
Vinç kamyonu
ManTGS 35.500 8x4 HMF 95 Tonmeter laadkraan bj. 2019!
Ara
Durum: iyi (kullanılmış), kilometre: 164.600 km, güç: 368 kW (500,34 bg), ilk tescil: 08/2017, yakıt türü: dizel, lastik boyutu: 385/55 22.5, dingil konfigürasyonu: 8x4, dingil mesafesi: 4.300 mm, yakıt: dizel, şoför kabini: yataklı kabin, emisyon sınıfı: Euro 6, süspansiyon: diğer, koltuk sayısı: 2, toplam uzunluk: 8.400 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.500 kg, Üretim yılı: 2017, Donanım: ABS, diferansiyel kilidi, elektrikli cam sistemi, hız sabitleyici, klima, vinç, = Additional Options and Accessories =
- Flashing lights
- Roof hatch
Gbsdpfxjza Uw Ns Aqtsn
- High beam
- Remote control
- Refrigerator
- Rear air suspension
- Radio/CD player
- Reversing camera
- Sun visor
- Toolbox
- PTO (Power Take-Off)
= Notes =
- Loading crane HMF 95 tonne-meter (Type: 9520K-RCS)
- Year of manufacture: 2019!
- 6x hydraulic extensions
- 5th and 6th function
- 7th function for the winch
- Oil cooler
- Radio remote control
- Lifting capacity (base crane):
* 6.1 meters -> 12,310 kg
* 7.9 meters -> 9,330 kg
* 9.8 meters -> 7,530 kg
* 11.8 meters -> 6,000 kg
* 13.8 meters -> 5,050 kg
* 16.0 meters -> 4,290 kg
- HMF Fly-Jib (Type: FJ2200)
- 6x hydraulically extendable
- 2x manually extendable
- Lifting capacity (Fly-Jib):
* 20.8 meters -> 2,085 kg
* 22.3 meters -> 1,900 kg
* 23.9 meters -> 1,740 kg
* 25.6 meters -> 1,525 kg
* 27.4 meters -> 1,250 kg
* 29.9 meters -> 1,050 kg
* 31.1 meters -> 700 kg (manual)
* 33.0 meters -> 400 kg (manual)
- Dynamic oil winch (Type: S25)
- Fifth wheel height: 132 cm
- Adjustable fifth wheel
- Multiple toolboxes
- Bed
- 9-ton front axles
- Only 164,442 km!
- Crane year of manufacture: 2019!
= Further Information =
General Information
Number of doors: 2
Registration number: 88-BXK-2
Technical Information
Number of cylinders: 6
Engine displacement: 12,419 cc
Axle Configuration
Front axle 1: Tyre size: 385/55 22.5; Max. axle load: 9,000 kg; Steering axle; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring
Front axle 2: Tyre size: 385/55 22.5; Max. axle load: 9,000 kg; Steering axle; Tyre tread left: 60%; Tyre tread right: 60%; Suspension: leaf spring
Rear axle 1: Tyre size: 315/70 22.5; Twin tyres; Differential lock; Max. axle load: 9,500 kg; Tyre tread left inside: 70%; Tyre tread left outside: 70%; Tyre tread right inside: 70%; Tyre tread right outside: 70%; Final drive: single reduction; Suspension: air suspension
Rear axle 2: Tyre size: 315/70 22.5; Twin tyres; Differential lock; Max. axle load: 9,500 kg; Tyre tread left inside: 70%; Tyre tread left outside: 70%; Tyre tread right inside: 70%; Tyre tread right outside: 70%; Final drive: single reduction; Suspension: air suspension
Weights
Unladen weight: 25,700 kg
Payload: 9,300 kg
Gross vehicle weight: 35,000 kg
Functional
Crane: HMF 9520K-RCS, year 2019, mounted behind the cab
Condition
Technical condition: good
Visual condition: good
Product Safety
Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEFaymonville MAX 710 Tiefbett 2+4 PA - Baggerbett
Ara
Durum: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Complete specification available upon request.
Gooseneck:
* Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm
* 2 pairs of foldable lashing rings on the outside (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN)
* Suitable for 6x4 or 8x4 2-axle tractor units
Compact front chassis:
* Hook mounting front and rear, length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Excavator deck:
* Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance of approx. 150 mm
4-axle rear chassis:
* Mechanical bolt-eye coupling for mounting a low bed at the front
* Rear end cross member, chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
Pendulum axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
Tyres
* Front chassis:
* 8 x (M+S) 285/70 R19.5 as per manufacturer specification
* Rear chassis tyres:
* 16 x (M+S) 285/70 R19.5 as per manufacturer specification
* Load index 150/148J
Paintwork:
* Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL
Including the following accessories:
* Steel front wall, approx. 400 mm high
* Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish
* 3.5-inch king pin
* Truck hydraulic connection with flow control (20 l/min)
* Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity
* With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works
* BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2
* Tool kit Art. No. 612452
* Multi-connection hydraulic couplers on the gooseneck
* Front chassis with separate air connection for pneumatic tools
* BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2
* One 7-pin socket left and right at the rear of the front chassis for warning panels
* Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN)
Godpfxexbmplj Aqtsbn
* Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2
* Socket on the rear chassis for the cable remote control of the rear steering
* Rear chassis with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
* 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery
* Remote control:
* Operation of the powerpack, engine start/stop
* Operation of the rear steering, in addition to the cable remot
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEFaymonville Telemax Sattelauflieger - 2fach tele
Ara
Durum: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the specification. Full equipment details available upon request.
LOAD AREA:
* Gooseneck, length approx. 3,900 mm with central beam
* Load area with double telescopic extension, length approx. 9,300 mm
* A support table approx. 200 mm wide is permanently welded to the central beam
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points)
* Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4
Gsdpfoyvnd Njx Aqtebn
* TPMS tire pressure monitoring system in compliance with ECE R 141
* BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice
* ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic functions
* 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward
* 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN)
* 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 at the rear of the gooseneck
* 2-inch king pin
* Mechanical landing legs with 2-speed gearbox and crank
* 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm
* 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward
* Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit
* Last axle with air bellows venting activated by applying the parking brake
* Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL
* Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917)
* 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection
* Approx. 32 mm wooden floor on the gooseneck and load area
* On the large cross-section telescopic tube, one locking position at approx. every 500 mm
* On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm
* Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN)
* 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm
* 4 wheel chocks with holders under the load area
* 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel
* 1 LED work light mounted left and right in front of the axles with wiring
* 2 axle load gauges mounted on the left side with axle load diagram included
* 1st axle with automatic lift axle function and start-up a...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX810 Semi-Tieflader 2+6 - 2fach tele
Ara
Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website.
Excerpt from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm
* For tractors: 6 x 4 or 8 x 4
* Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L
* With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer
* Gallows with winch for spare wheel located at the front of the gooseneck
* 3.5 inch kingpin
* Steel front wall approx. 400 mm high
* Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish
* Operating levers on the gooseneck protected by a foldable cover
* Illuminated controls at the gooseneck, with on/off switch
* One 7-pin socket left and right at the rear of the gooseneck for warning sign
* BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2
* Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers
Gsdpfxszahp Se Aqtobn
* Access steps to the gooseneck
* Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon
* Mounting adapter for 2 spare wheels
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm
* Hydraulic connection lines between the power pack and the connector plate at the gooseneck
* One LED work light left and right at the rear plate of the gooseneck with separate on/off switches
* Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear.
2-Axle Front Bogie:
* Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm
* BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods)
* One 7-pin socket left and right at the rear of the front bogie for warning panels
* Bogie surface finished with painted-in sand coating for slip-resistance
* Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer
* One 7-pin socket for warning panels, left and right at the front bogie, in the axle area
* Extendable extensions of approx. 230 mm per side for a 2-axle bogie
* 1 pair of M42 threaded blocks between the axles of the front bogie
* 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed
Load Bed:
* 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8°
* Load bed length: approx. 11,000 mm
* Technically extendable by approx. 8,200 + 7,700 mm
* Axle spacing: approx. 1,500 mm
* Standard width: approx. 2,750 mm
* Hydraulic coupling pin
* BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2
* Load bed surface finished with painted-in sand coating for slip-resistance
* 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN)
* Permanently welded intermediate platform, approx.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Ara
Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list.
Full equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractors: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer
* 2-inch king pin
* Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide
* Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917)
* On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish
Godpjy Auhhsfx Aqtobn
* One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration)
LOADING PLATFORM:
* Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6°
* Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads
TYRES:
235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion
* TPMS tyre pressure monitoring system in accordance with ECE R 141
AXLES:
* BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering
* 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually
* 1st axle with traction help
* Technical axle load: 12,000 kg each
* Air suspension with lift-lower valve
HYDRAULIC LOADING RAMPS:
* 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide
* Hydraulically folding ramp tips
* Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently
* Flashing lights on outer side of ramp tips, switch located next to ramp controls
* Transport lock for ramps using quick-lock mechanism
* On-outline sand coating finish on ramp outer frame and ramp tips
* Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks
* Control valves for hydraulic ramps located on the right side of the vehicle
BRAKING SYSTEM:
WABCO EBS-E braking system, meets current EU requirements
SURFACE PROTECTION:
* HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection
PAINTWORK:
* Trailer in carmine red (RAL 3002)
* Rims in silver grey
* Side panels: natural aluminum
* Wheel hubs per axle manufacturer
* Lamp panel in pure white (RAL 9010)
EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame
* Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage
* Behind front wall: approx. 12 mm thick DELIGNIT board bolted on
* Two additional pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Ara
Durum: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the Equipment List. Complete equipment details available upon request.
Loading Platform:
- Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length
- Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Gooseneck:
- Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractor units: 4x2, 6x2
Rear Chassis:
- Rear chassis in short version with closed outer frame and checker plate cover
- Chassis with excavator recess, closed in the rear half to accommodate air tanks
- 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN)
- 1 pair of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN)
Axles:
- BPW axles with hydro-mechanical forced steering
- Technical axle load: 12,000 kg each
- Air suspension with lift and lower valve
Tyres:
- 245/70 R 17.5 3PMSF tyres
- Manufacturer of our choice
- Load index (146/146F)
- TPMS tyre pressure monitoring system per ECE R 141
- Data transfer to the tractor via standardized EBS interface (ISO 11992)
- The tractor must be capable of transmitting and displaying these data for correct indication
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Godpoxarl Njfx Aqtsbn
Electrical System:
- Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the turn signal
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel Structure:
- Made from high-strength fine-grained steels
- Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Coating:
- Complete steel frame automatically shot-blasted after welding
- Second blasting treatment with corundum for optimal coating adhesion
- HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection
- Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL
- Rims in silver
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paint not available
- Paint build-up tested in salt spray fog test according to ISO 9227-NSS
- Cavity sealing with special wax
Including the following additional equipment:
- 2-inch king pin
- One galvanized steel front wall, approx. 400 mm high
- Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included)
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings
- Electro-hydraulic power unit
- Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams
- Without container locks
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE3-Achs-Tiefbett 3x10 t Außenträger
Ara
Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Equipment excerpt. Full specification upon request.
Gooseneck:
* Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long
* Gooseneck hydraulically lift/lowerable and detachable
* For tractor units: 6x4 or 8x4
Lowbed:
* Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long
* Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking
* Supply lines are protected within the extendable beams and automatically adjust to the lowbed length
* 7 pairs of lashing rings foldable outward (LC 10,000 daN)
* 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings
Gjdpfoy Uwu Ijx Aqtjbn
Rear Undercarriage:
* Rear chassis with closed outer frame and checker plate cover
* Chassis with excavator trough, closed in the rear half to accommodate air tanks
* 3 pairs of lashing rings foldable outward (LC 5,000 daN)
* 1 pair of lashing rings foldable outward (LC 10,000 daN)
* 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN)
Axles:
* BPW axles and suspension, all axles hydromechanically forced steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F)
Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL
Including accessories:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized connection bar at the front
* Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit)
* Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks
* Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings
* Electro-hydraulic power unit
* Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO)
* Yellow reflective tape to EU regulations on sides, extension and rear of the trailer
* At the gooseneck and rear, left and right, a bracket for warning signs including a socket
* Manual and description on USB stick
* Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps
* 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4
* 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
* On the gooseneck, a separate air connection with air gun
* 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Ara
Durum: ikinci el, boş ağırlık: 10.350 kg, azami yük ağırlığı: 37.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: turuncu, Üretim yılı: 2018, işletme ağırlığı: 10.350 kg, Donanım: ABS,
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMegamax Tiefbett 2x12 t PA
Ara
Durum: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of vehicles, available immediately and at short notice, on our website.
Partial list of features. Full equipment details upon request.
Gooseneck:
* Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable
* Technical kingpin load: 25,000 kg
* Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Lowbed:
* Lowbed designed as a telescopic vessel bridge in low-profile construction, extendable at the front with mechanical locking
* Length x width approx. 6,850 mm x 2,540 mm
* Supply lines run protected in the extendable beams and automatically adjust to the current lowbed length
Axles and Suspension:
* PENDLE-AXLE
* All axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation
* Cylinders with automatic RESET function
* Hydraulic cylinders with shut-off valves and preload pins for securing in raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Tires: 245/70 R 17.5
* Rear chassis with closed external frame, checker plate cover, and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Brake System:
* Brake system: WABCO EBS-E in accordance with EU regulations, without connecting cables to the tractor unit
Paintwork:
* Trailer color: RAL 3002 Carmine Red
Included Accessories:
* Removable steel front wall, approx. 400 mm high
* 3 kW electric-hydraulic power pack for hydraulic operations (except hydraulic winches), supply line installation on the tractor unit not included
* Outer beams on the gooseneck with mounting holes for bolt-on lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring each left and right on the rear slope of the gooseneck (LC 6,000 daN)
* 2" king pin
* Locking point approx. every 500 mm on the extension
* 1 pair of steel ramps with climbing slats and locking pins for bridging the lowbed receiving hooks
* 1 lashing ring each left and right on the front crossmember (LC 10,000 daN)
* Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading deck
* Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams
Gedpfx Aqex Uvllstjbn
* Cutouts above the lashing rings
* 1 hanging lashing ring each left and right outside on the rear crossmember (LC 10,000 daN) on the outer beams of the loading deck
* Preparation for removable loading floor
* Hanging bar at the front of the rear chassis for loose access ramps to the lowbed
* Chassis with beveled rear corners
* Hanging bar for loose aluminium ramps on the rear end traverse of the vehicle
* Remote steering from front and rear via cable remote control with push-buttons, with axle tracking control, without installation in the tractor unit
* Mechanical pin-latch coupling from lowbed to chassis for swapping loading platforms or installing extension beams, with electrical, pneumatic, and hydraulic couplings
* Round NATO socket at the front connector bar (Maeler & Kaege VG 96 917)
* 2 axle load gauges mounted on the left side
Including special accessories:
* 1 pair of removable aluminium side walls on the gooseneck, approx. 400 mm high, anodized finish
* A
Küçük ilan
Hedensted
2.656 km
Platform römorku
FaymonvilleExtendable / Ausziehbarer auflieger
Ara
Durum: iyi (kullanılmış), makine/araç numarası: YAFTL6002R0035345, yükleme alanı uzunluğu: 14.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 9.000 mm, Üretim yılı: 2024, = Diğer seçenekler ve donanımlar =
Gjdpex Rtiaefx Aqtjbn
- Arka havalı süspansiyon
- Ön havalı süspansiyon
- Kampanalı fren sistemi
= Diğer bilgiler =
Yük kapasitesi: 81.100 kg
Azami toplam ağırlık: 81.100 kg
Teknik durumu: iyi
Görsel durumu: iyi
Ön lastik durumu: 60
Ön lastikler: 245/70 R17.5
Arka lastikler: 245/70 R17.5
Son muayene: 2025-12-28
Daha fazla bilgi için Lastas Sales ile iletişime geçiniz.
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer 4-Achs-Ballastauflieger
Ara
Durum: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area:
- Cargo area with approx. 30 mm thick hardwood floor
- 10 pairs of outward-folding lashing rings
Landing legs:
Gjdpjrq Dlfofx Aqtobn
- JOST landing gear with 2-speed gearbox for 24 t lifting capacity
Axles and tyres:
- BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable
- Air suspension with raise/lower valve
- Axle tools
- Tyres: 385/65 R22.5
Braking system:
- WABCO braking system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel construction made of high-strength fine grain steels
- Steel grades:
- S355J2+N / S355MC
- S690QL / S700MC
Electrics:
- Electrical system according to EU regulations, 24-volt lighting
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Painting:
- First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer
- High-quality single-colour 2-component top coat in Nova grey
- Rear section metallized and painted in RAL 9010
Accessories included:
- Cargo area with approx. 30 mm thick hardwood floor
- 2" king pin
- Galvanized steel front wall approx. 1,200 mm high, EN12642-XL
- Yellow-red air couplings at the galvanized front connection strip
- 4 wheel chocks with holder at the front wall
- Holder for 1,000 mm posts in the rear central beam
- At the gooseneck and the rear plate, holders for warning panels including socket, left and right
- Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles
- Electro-hydraulic power unit
- White reflective tape according to EU regulations on the sides of the trailer, red at the rear
- 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area
- European reflector plates at the rear of the trailer
- A holder for a revolving beacon at the rear of the trailer
- A mudflap at the rear of the trailer
- Manual and description on USB stick
- BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump
- TPMS tyre pressure monitoring system:
- The tractor unit must be capable of receiving and displaying this data in order for correct indication
- Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition
- Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control
- 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes
- 80 km/h speed stickers at rear and both sides
- Adjustable access ladders mounted on the left and right sides in the direction of travel
- 2 reversing lights mounted on the rear plate
- Load gauge for axle loads including load diagram
- HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished
Küçük ilan
Dortmund
2.568 km
Yarı römork
Faymonville3-Achs-Beton-Innenlader-PrefaMAX
Ara
Durum: yeni, boş ağırlık: 9.450 kg, azami yük ağırlığı: 35.550 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 1.560 mm, toplam genişlik: 2.550 mm, lastik boyutu: 385/65 R 22,5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck designed as a loading platform with aluminum chequer plate surface
- Front bevel approx. 45°
- Hydraulic lifting rocker, lifting and lowering range approx. -280/+250 mm
- Two kingpin positions at 2,300 and 2,000 mm
- For tractor units: 4x2, 6x2, or 6x4
Loading Bay:
- Loading bay, approx. 9,500 mm long, with angle profiles underneath for pallet accommodation (distance kingpin to axle centre approx. 8,000 mm)
Axles, Suspension, and Tyres:
- BPW stub axles, with drum brakes, independent wheel suspension, hydraulic axle equalisation with lift and lower function
- Lowering lock on axles in case of suspension airbag rupture, designed for max. pallet height of 150 mm
- Tyres: 385/65 R 22.5
- TPMS tyre pressure monitoring sensors mounted on all wheels including spare wheels
- TPMS system in accordance with ECE R 141
Surface Treatment:
- Complete steel structure automatically shot-blasted with blast wheel unit after welding
- Second blasting with corundum for optimal coating adhesion
- HRM metallisation of entire chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimum corrosion protection
- Final coating: 2 coats of 2K topcoat, single colour in Novagrau (DB 7350)
- Paint structure tested in salt spray test according to ISO 9227-NSS, cavities sealed with special wax
Standard Accessories:
- Removable steel front wall, approx. 400 mm high
- Tool box with lid recessed at rear of gooseneck, approx. 640 x 700 x 215 mm
- Plug-in ALU rear wall on gooseneck, approx. 400 mm high, anodised
- One pair foldable ALU side walls on gooseneck, approx. 400 mm high, anodised
- 2" kingpin
- 3 pairs recessed lashing rings on gooseneck (LC 6,300 daN)
Gsdpfx Aqeygvc Hotjbn
- At the front connection rail, yellow-red air couplings, lighting for operating gooseneck, suspension and hydraulic bracing with on/off switch
- Mechanical drop tube supports for approx. 48,000 kg support load
- Boarding ladder mounted on front right with 2 plug-in handrails
- WABCO Roll Stability Support (RSS)
- 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN)
- On the longitudinal beams, grating inserts level with guide rails of cargo restraints
- Hydraulic pre-installation incl. control unit for mounting 3 pairs of our hydraulic cargo restraints
- First and last axle liftable manually left and right
- Storage boxes behind the axle unit left and right, splash-proof
- Rear taper for easier pallet insertion
- Rear cross member with lugs for mechanical bracing
- 7-pin socket at the rear cross member
- Electro-hydraulic unit
- 4 wheel chocks with holder
- 2 axle load gauges mounted on the left incl. axle load chart
- 3 pairs of hydraulic cargo restraints with swivel arms, slideable on longitudinal beams
- Rear door with cross bracing, hinged left, hydraulically locked right, can be latched horizontally at 90°, 105°, and 270°
- Fold-up underride guard for transporting up to 4 empty standard pallets
- 1 spare wheel
- Number plate with bracket incl. lighting, rear left on trailer
- Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
- Central lubrication system with 1 pump, BEKAMAX brand, for standard grease
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville3-Achs-Tiefbett-Pendelachsen-Bolzen-Laschenkupp.
Ara
Durum: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly)
Low bed:
- Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front
- Length x width approx. 7,550 mm x 2,740 mm
- Mechanical locking of the extension
Chassis:
- Rear chassis with closed outer frame
- Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear
Axles, Suspension, and Tyres:
- “PENDEL-AXLE”, all axles hydromechanically forced steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260"
- Technical axle load 12,000 kg
Gbedsh Hm Tzjpfx Aqten
- Hydraulic axle compensation
- 245/70 R 17.5 tyres
Accessories:
- Detachable steel front wall, approx. 400 mm high
- 4 wheel chocks
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks
- Ramps can be placed over or between the hooks
- Mounting points for steel loading ramps at the rear between the external beams of the gooseneck
- One locking position approximately every 1,000 mm on the extension
- 1 lashing ring each left and right on the front cross member
- Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile
- 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings
- 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards
- 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings
- Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps, brand BEKAMAX
- Remote steering from front and rear, operable via cable remote control, with single-track control of axles
- 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches
- Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Loose widening boards, framed in steel
- 4 warning panels approx. 423 x 423 mm
- Radio remote control for remote steering operation
- 3.5" kingpin
- Anti-slip stickers on the left bevel of the gooseneck
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide
- 1 spare wheel with mounting adapter
- Parking position on the gooseneck for warning panels when not in use
- 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm
- Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear
- Trailer colour MB 7350 Novagrau
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Ara
Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
Gjdpowhywfofx Aqtjbn
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Ara
Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
Gbedjuqlmnopfx Aqtjn
- Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
- Extendable loading platform with rear bevel approximately 1,000 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-tracking axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear or manually
- Air suspension with raise/lower valve
- Axle tools
- 235/75 R 17.5 3PMSF
Brake System:
- WABCO braking system complying with EU regulations, with EBS-E (2S2M)
Landing Legs:
- JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load)
Accessories Included:
- One spare wheel with holder in front of the front wall
- 2" kingpin
- Galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection strip
- 4 wheel chocks with holders on the front wall
- Bracket for beacon at rear of trailer
- Recess at rear of gooseneck for ALU entry ramps
- Galvanised folding supports under the loading platform's rear bevel
- Cover plates to bridge gap between ramps and loading platform
- White reflective tape according to EU regulations on sides, extendable section, and rear in red
- Electro-hydraulic unit at the rear, under the loading platform
- Brackets for warning signs on both left/right of gooseneck and ramps, with socket
- Ramp control valves fitted on right-hand side of trailer
- Mudflap at the trailer rear
- Manual and documentation on USB stick
- ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm
- Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm)
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container
- 6 pairs of stake pockets 100x50 mm in outer frame of loading platform
- Galvanised extendable width extensions, approx. 230 mm per side
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel
- Sanded, painted anti-slip layer on checker plates over kingpin and loading platform
- Holder for beacon on warning signs
- European reflector boards (red-yellow) at the rear
- 80 km/h speed limit stickers on rear and both sides
- Load manometer for determining axle loads including load chart
- HRM Metallisation (High Resistance Metallisation) of outer frame
- Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Semi-nachlaufgelenkt
Ara
Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
Gbodpfounrapex Aqtsn
- Loading area with rear bevel approx. 1,000 mm x 8°
- Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- Cut-outs in the outer frame of the loading area for attaching tensioning straps
- Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Gear:
- JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- TPMS tyre pressure monitoring system as per ECE R 141
- Tyres: 235/75 R 17.5
Paintwork:
- Complete steel structure automatically blasted with shot blasting machine after welding
- Second blasting with corundum for optimal coating adhesion
- Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau
- Rims painted silver
- Rear section metallised and painted RAL 9010 (Pure White)
- Cavities sealed with special wax
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin
Accessories Included:
- Numerous lashing positions
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection bar
- 4 wheel chocks with holder on the front wall
- Holder at the rear of the gooseneck for ALU loading ramps
- Galvanised folding support legs under the rear bevel of the loading area
- Holder for rotating beacon at the rear of the trailer
- Galvanised, extendable widenings approx. 230 mm per side
- White reflective tape to EU regulations on the sides, red at the rear
- Holders for warning panels with socket at the gooseneck and rear crossmember, left and right
- Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanised stakes
- 2 pairs of WADER container pockets in the loading area for a 20ft container
- 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area
- Movable mounting bar for ALU loading ramps at the rear of the vehicle
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel
- Anti-slip sand coating applied to checker plates on gooseneck and loading area
- Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light
- Bracket for rotating beacon on the warning signs
- 80 km/h speed stickers at rear and on both sides
- European reflector panels (red/yellow) at rear of trailer
- Manual and operating instructions on USB stick
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville2-Achs-Tiefbett-Pendelach.-Bolzen-Lasch.
Ara
Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long
- Gooseneck hydraulically lift/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4
Load bed:
- Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension
- Length 6,850 mm x width 2,540 mm
- One locking point approximately every 1,000 mm on the extension
Rear running gear:
- Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Axles, Suspension, and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically steered
- Hose rupture valve on axle compensation cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position
- Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires: 245/70 R 17.5
- TPMS tire pressure monitoring system according to ECE R 14
- TPMS pressure sensors mounted in all wheels, including spares
Included accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches
- One spare wheel with mounting adapter
- Gooseneck outer beams with mounting holes for bolt-on lashing rings
- Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck
- One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck
- Chequer plate cover over the gooseneck
- Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
- Gooseneck operation lighting with on/off switch
- Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly
- 2" king pin
- Anti-slip sticker on the left chamfer of the gooseneck
- Gooseneck closed at the rear upper area with a removable cover
- 4 chocks with holders
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed
- The ramps can be placed above or between the hooks
- Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck
- Prepared for bolt-on container supports for 1x20ft on the outer beams
Godpfx Aqjvy Edcetebn
- Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams
- With electro-pneumatic-hydraulic couplings
- Outer beams of the low bed with integrated sand coating as anti-slip protection
- Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps
- 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm
- Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps
- Remote control (radio and cable)
- 4 extensible warning signs approx. 423 mm x 423 mm
- Extensive lashing positions
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer 3-Achs-Plateau-Sattelaufl.
Ara
Durum: yeni, boş ağırlık: 6.350 kg, azami yük ağırlığı: 38.650 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Platform:
- 2 pairs of external foldable lashing rings (LC 5,000 daN)
- 24 pairs of cutouts in the platform’s outer frame for attaching tensioning straps (LC 2,000 daN)
Landing Gear:
- JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
- BPW axles, air suspended, with disc brakes (430 mm), with raise/lower function
- Tyres: 385/65 R 22.5
Braking System:
- WABCO braking system according to EU regulations with EBS-E (2S2M)
Paintwork:
- Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
- High-quality 2-component (2K) topcoat in single-tone MB 7350 Novagrau
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paint not possible
Steel Construction:
- Steel construction made of high-strength fine-grain steels
Gjdpfx Aoiu Etksqtjbn
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Electrical System:
- Electrical system in accordance with EU regulations
- Lighting 24 Volt
- ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin
- Wiring according to ISO norms:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Accessories included:
- Yellow-red air couplings on the galvanized front terminal strip
- 4 wheel chocks with holder
- 2" king pin
- A galvanized steel front wall approx. 1,600 mm high. EN12642-XL
- White reflective tape according to EU regulations on the sides and red on the trailer’s rear
- European reflective plates (red-yellow) at the rear of the trailer
- Platform with approx. 30 mm thick hardwood floor, fitted in omega profiles
- 10 pairs of stake pockets for 100 x 50 mm slot-in stakes in the platform’s outer frame
- 3 pairs of transverse stake pocket strips mounted on the platform for 100 x 50 mm slot-in stakes
- Storage tray for 1,000 mm slot-in stakes at the rear in the central beam
- 1 spare wheel carrier under the platform on the right side (direction of travel)
- One mudflap at the rear of the trailer
- Manual and documentation on USB stick
- One bracket for a rotating beacon at the rear of the trailer
- On the gooseneck and rear apron, brackets on both sides for warning signs including socket
- 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, flush with the rear
- 80 km/h speed limit stickers at the rear and on both sides
- Four warning signs extendable by approx. 400 mm, each approx. 423 x 423 mm, with LED position light
- Load gauge for axle load determination including load chart
- HRM Metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then the defined visible surfaces metalized and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)
Küçük ilan
Dortmund
2.568 km
Platform
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-nachlaufgel.
Ara
Durum: yeni, boş ağırlık: 8.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.080 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, renk: gri, Donanım: ABS, hidrolik arka platform, Loading Area:
Loading area, extendable design with pneumatically operated locking mechanism
Cut-outs in the outer frame of the loading area for securing straps to be hooked in
Landing Gear:
JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity
Axles and Tyres:
BPW axles, air-suspended, with disc brakes (430 mm), equipped with raise/lower function
Trailing steering axle with electro-magnetic reversing lock, activated via reverse gear or manually
Axle tool kit
Tyres: 385/65 R 22.5
Brake System:
WABCO brake system compliant with EU regulations, with EBS-E
Paintwork:
Superior and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc-rich primer
High-quality two-component top coat, single-tone in MB 7350 Novagrau
tail section metallized and painted in RAL 9010
Metallic paint not possible
Steel Construction:
Steel construction made from high-strength fine-grained steels
Steel grades:
S355J2+N / S355MC
S690QL / S700MC
Electrical System:
Electrical system according to EU regulations
24 Volt ASPÖCK-NORDIK lighting
ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
Connections according to ISO
Accessories Included:
Front galvanized connection strip with yellow-red air couplings
Galvanized steel front bulkhead approx. 1,600 mm high, EN12642-XL
4 wheel chocks with brackets
White reflective tape on the sides, on the extension, and rear red tape according to EU regulations
European reflector plates at the rear of the trailer
Approx. 30 mm thick hardwood floor, enclosed in omega profiles
10 pairs of stake pockets for 100 x 50 mm insert stakes in the outer frame
1 spare wheel carrier beneath the loading area, right side (in driving direction)
Manual and operating instructions
Bracket for rotating beacon at the rear of the trailer
On the gooseneck and rear plate, left and right: bracket for warning signs including socket outlets
Central chassis with painted sand coating as anti-slip protection
6 pairs of WADER container pockets in the loading area: for 1x 20ft container, 2x 20ft containers, or for 1x 40ft container in the extension, an additional locking point is provided for a 45ft container
4 pairs of crosswise stake pocket strips mounted in the loading area, for insert stakes 100 x 50 mm
One galvanized crosswise bracket underneath the loading area, 2,390 x 720 x 400 mm
Access ladder mounted on the right (in driving direction)
Gbjdpfx Ajikyh Hjqtjn
Lifting axle on the front axle with TEBS E control, depending on the current axle load and current loading status
Load gauge for determining axle loads, including load chart
HRM metallization of the outer frame: Complete steel construction blasted, then defined visible areas metallized with ZINACOR 850 hot finish
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer-3-Achs-Mega-Tele-Plateau-nachlaufgel.
Ara
Durum: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area:
- Extendable cargo area design with pneumatically actuated locking
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
- Cut-outs in the external frame of the cargo area for securing belts
Axles and Tyres:
- BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower)
- Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually
- Axle tools included
- Tyres: 435/50 R 19.5
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Paintwork:
- First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K)
- High-quality single-tone two-component topcoat (2K) in Novagrau
- Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not possible
Landing Gear:
- JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel Construction:
- Steel construction from high-tensile fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical System:
- Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
Gbsdpfx Aqsi Dwlwston
- 15-pin ISO-12098
Accessories Included:
- Yellow-red air couplings on the galvanized front connection panel
- 2 wheel chocks with brackets
- 2" king pin
- Galvanized steel front wall approx. 1,600 mm high
- Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer
- European reflective plates (red-yellow) at the rear of the trailer
- Cargo floor made of approx. 38 mm thick hardwood
- 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area
- 1 spare wheel holder under the cargo area on the right in driving direction
- Manual and documentation on USB stick
- 1 mud flap at the rear of the trailer
- 1 bracket for a beacon at the rear of the trailer
- At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket
- 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm)
- 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container
- 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes
- 60 km/h speed sticker at the rear
- 2 reversing lights mounted on the rear panel
- Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light
- Mounting bracket for beacon on the warning signs
- HRM metalization (High Resistance Metallisation) of the external frame
- Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+2) - nachlaufgelenkt
Ara
Durum: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Partial list of features. Full specification available on request.
NECK:
* SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Plug-in steel front bulkhead, approx. 400 mm high
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches)
* Approx. 40 mm hardwood decking above gooseneck
* 2-inch kingpin
* Gooseneck guide plate for fifth wheel, approx. 500 mm wide
* Rear of gooseneck equipped for ALU approach ramps
* Round NATO socket on front connection strip (Maeler & Kaege VG 96 917)
* 4 wheel chocks with holders ahead of the front bulkhead
* 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam)
EQUIPMENT:
* Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10°
* Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing
* 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually
* Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve
* 235/75 R 17.5 3PMSF twin tires. Brand of our choice
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg
* Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction)
* 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements
* Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle
* Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings
* Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers)
* Lockable aluminium elements fitted onto the extension pipes of the outriggers
* 1 pair of mechanical rear supports
* 1st axle with traction aid
* Painted sand...
Gbodpfey Auh Isx Aqtsn
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Ara
Durum: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.
Equipment excerpt. Full equipment details available upon request.
Gooseneck:
* Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles
Landing legs:
JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t)
Tyres:
* Tyres 205/65 R17.5 - brand of our choice
TPMS:
* TPMS tyre pressure monitoring system pursuant to ECE R 141
Axles:
* BPW axles, two rigid axles, two steering axles
* Air suspension with lifting/lowering feature
* Drum brakes
* Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Brake system:
* WABCO braking system according to EU regulations with EBS-E (4S3M)
Electrical system:
* Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3)
* All LED side marker lamps flash synchronously with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098
Gbsdjy Aug Dopfx Aqtsn
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Trailer color RAL 3002 Carmine Red
* Wheels Silver Grey
* Tarpaulin RAL 9006 (brilliant direct)
Options included:
* One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket
* 2-inch king pin
* Galvanized steel bulkhead
* Yellow-red air couplings at the galvanized front connection strip
* 4 wheel chocks with holder mounted on the bulkhead
* 3-level wooden boards
* Galvanized folding supports under the loading area chamfer
* Mount for beacon at the rear of the trailer
* Height-adjustable tarpaulin structure – approx. 3,960 mm
* Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm
* EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall)
* 3 pairs of sliding stanchions in the loading area
* The body can be hydraulically widened at the rear to the left and right by approx. 750 mm
* Sliding roof with fold-up portal beam
* Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded)
* Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin
* Rear of the body with closed anodized ALU swing doors
* Hook-in rail for ALU drive-on ramps at the rear of the vehicle
* Control valves for hydraulic body widening mounted on the right trailer side
* White reflective tape in accordance with EU regulations, red tape at the rear
* Electro-hydraulic unit mounted at rear under loading area
* Mud flaps at the rear of the trailer
* European reflective warning signs (red-yellow) at the rear of the tr
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX110 Semi-Tieflader
Ara
Durum: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Area:
* Extendable loading area with rear bevel approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN)
* Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering
Tyres:
* Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F)
TPMS:
* TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data.
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, all axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* Axle tools
Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel Construction:
* Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine
* Second abrasive blasting with corundum for optimal adhesion of the coating system
Gedpfxey Auifj Aqtsbn
* Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
Accessories:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection strip
* Spare wheel holder in front of the front wall (without spare wheel)
* Electro-hydraulic power pack
* Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit)
* Attachment bar for ALU loading ramps on gooseneck with integrated impact protection
* At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
* Holder for a beacon at the rear of the trailer
* Galvanized foldable supports under the rear bevel of the loading area
* 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN)
* Axle load gauge with load diagram
* On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection
* On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized...
Sizin için aramayı kolaylaştırıyoruz: "faymonville f-s42-2acb pendel-x 5.5 meter extandable!"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.


























































































































































































































































