Kullanılmış Müller-Mitteltal 3- Achs Sattel.-Luft-Lenk,Hydr. Rampe Mit Gummi satın al (45.687)

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: Iedoy U A Efjpfx Al Retk * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages at the front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left & right side * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) at an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm – 5 x 3 t UVV lashing brackets installed per side * In the corners at the front and rear, one 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various bores in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles Isdpjv D Tbdefx Al Retk * Rear storage compartment below the loading area, integrated in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in a shade of black ----Additional Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 39/2026

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brake System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and adjustable height ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V wiring * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer – pressure gauge for payload determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel skirts with splash protection * Reflective contour tape on sides and rear Iedpfol Tlhrjx Al Rstk * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Forepart in front of the turntable platform approx. 490 mm long with 45° corners * Robot-welded anti-slip coating on the turntable platform steel deck * Hardwood flooring on running surfaces of the low loader platform ----Load Securing (La-Si Package, consisting of): * In front of the bulkhead carrier left & right, each with 1 x 13.4 t UVV lashing ring * Four holes per side in the turntable platform, each with 2 t lashing capacity * 1 pair of 13.4 t lashing rings suspended at the rear left & right in front of the rear crossmember * Four pairs per side of 10 t foldable and lowerable UVV lashing rings, loadable in all directions, integrated into the outer frame * Three stake pockets per side, each with 2 t lashing option ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not in the sloping rear) * Board holder for extensions mounted longitudinally under the chassis on the left ----Excavator Arm Rest: * Excavator arm rest from rear axle to end crossmember, approx. 2,100 mm long and approx. 190 mm deep * Two pairs per side of 6.4 t lashing rings in the excavator arm rest ----Ramps: * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable side-to-side * Outer boards of the loading ramps made of hardwood * Steel structure prepped for 6-way control valve ----Loading Height: * Unladen loading height approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black ----Information: * Vehicle has a day registration dated 07/2024, due to the missing tire pressure monitoring system and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: Ijdpfx Aljvin Ucs Retk * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical System: Iodpel Tnu Asfx Al Rotk * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (switched by reverse gear) ----General Attachments: * Manometer - pressure gauge for determining load weight (axles separated over 2 air suspension circuits) * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud flaps with spray protection * Reflective contour tape on sides and rear * Toolbox, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Deck: * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip covering on steel plate of the turntable platform * Hardwood flooring on running surfaces of the low loader deck ----Load Securing (load securing package includes): * In front of the front wall carrier left & right, 1 x 13.4 t UVV lashing point each * 4 holes per side in the turntable platform, each with a lashing capacity of 2 t * 1 pair of lashing points (13.4 t) suspended at the rear left & right in front of the rear cross member * Per side 4 pairs of UVV lashing rings (10 t), swiveling and lowerable, loadable in all directions and recessed into the outer frame * Per side 3 stake pockets, each with a simultaneous 2 t lashing option ----Widening Kit: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (except at the rear bevel) * Plank holders for extensions under the chassis, left side in longitudinal direction ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points per side in the excavator arm rest ----Ramps: * Hydraulically operated, one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks on the ramps made of hardwood * Steel construction prepared for 6-function slider valve ----Loading Height: * Loaded edge (unladen) approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Chassis, turntable frame, folding outriggers, mechanical drop supports, ramps galvanized * --Axles, air tank, drawbar painted in black tone-- ----Info: * Vehicle has a temporary registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale Itedpfx Aljvin T Ss Rjk ----Delivery Time: * Available from approx. week 45 / 2026

Durum: ikinci el, azami yük ağırlığı: 31.300 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.050 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Meusburger MPG-3 Düşük Yataklı Römork, Direksiyonlu/Kaldırılabilir Dingil, Hidrolik Rampalı Donanım: Hava süspansiyonu * Dingil ağırlık ölçer * 1. Dingil kaldırılabilir dingil * 3. Dingil direksiyonlu * Ek destek ve kablosuz uzaktan kumanda ile hidrolik rampa * Geçiş rampası * Kablosuz uzaktan kumanda ile elektrikli vinç * Edscha brandası * Her iki tarafta depolama bölmeleri * Kullanıma hazır yedek lastik * Ek farlar * Çekilebilir genişlik levhaları Güvenlik: ABS * EBS * Disk fren Hatalar ve ön satış saklıdır. Itjdpfx Aljwfwd Ds Rsk Şirket içi araç numarası: 8303

Durum: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! Itjdpfxswmpbdj Al Rek - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profil 30.0: * EBS fren sistemi * RDÜ lastık basıncı izleme sistemi * Yaylı hava silindirleri için acil serbest bırakma mekanizması * Kampana frenler * 3 x 11 ton BPW Eco akslar * Yaylı süspansiyon * Arka aks mekanik dengeleme * Yan çarpma koruması * Şasi çerçevesinin arkasındaki döner destek ayakları * Ön ve arka kısımda mekanik olarak ayarlanabilir uyarı levhası setleri * Ön aks için kapalı plastik çamurluk ve arka aks için düz bükülmüş çelik levha etekler, her ikisi de sıçrama koruması ile * Yanlarda ve arkada reflektörlü kontur şeridi * Döner platform üzerindeki alet kutusu için katlanır kapak (sıcak daldırma galvanizli) * Çoklu voltaj sistemi * LED arka farlar * Arka kısımda döner lamba (çıkarılabilir) * 40 mm çekme gözü ve yay ve gergi kilidi ile yükseklik ayarı olan çekme çubuğu * 15 kutuplu elektrik prizi * Her iki yanda 4 adet bağlama yuvası (ancak bağlama çubukları mevcut değil), aynı anda bağlama imkanı * Aşağıdakilerden oluşan La-Si paketi: Döner platformun ana şasisinde önde sol ve sağda 2 adet bağlama gözü (6,4 ton), 5 çift UVV bağlama halkası, her yönde yüke dayanıklı ve dış çerçeveye gömülü - köşelerde 13,4 ton, diğer yerlerde 10 ton. * 3 m toplam genişlik için 6 çift mekanik katlanır destek ayağı (ancak arka eğimde değil) * Yükleme alanının ortasında genişletme plakaları * Arka aks üzerinden yaklaşık 2.100 mm uzunluğunda ekskavatör kolu destek çubuğu (ekskavatör kolu destek çubuğunda yanlarda 2 çift 6,4 tonluk bağlama halkası) * Hidrolik, tek parça rampalar (yaklaşık 3.000 x 720 mm) * Daha sonra hidrolik rampa kaydırma sisteminin takılması için 4 yollu kontrol bloğu * Mekanik yan rampa kaydırma * Döner halka üzerindeki yükleme alanı: yaklaşık 1.960 x 2.520 mm * Boş haldeki yükseklik yaklaşık 1.070 mm * Arka yükleme alanı: yaklaşık 6.500 x 2.520 mm * Boş haldeki yükseklik yaklaşık 910 mm (860 mm'lik rampa eğimi dahil) * Şasi, döner platform, çekme çubuğu ve rampalar sıcak daldırma galvanizli * Akslar, yaylar, hava tankı vb. siyah tonunda boyalı * 235/75 R 17,5 çift lastik * 5.900 kg boş ağırlık * --30.000 kg toplam ağırlık teknik olarak mümkün-- * Araç sıcak daldırma galvanizli Itedpfxel Thxdo Al Rsk * Üretici garantili yeni araç * Hatalar ve ön satış saklıdır * Yaklaşık 44. hafta/2026'dan itibaren teslimat mümkündür.

Durum: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profil 30,0: * EBS-E (elektronik fren sistemi) Ijdpfx Astplv Njl Rjtk * RDS Lastık Basıncı İzleme Sistemi * Yaylı silindirler için acil serbest bırakma mekanizması * Kampana frenler * 3 x 11 ton BPW Eco akslar * Kaldırma ve alçaltma sistemi ile hava süspansiyonu * Toplam aks yükünü aks grubuna göre göstermek için basınç sensörleri ile birlikte römork üzerindeki bilgi aracı olarak SmartBoard * Yan çarpma koruması * Önde ve arkada mekanik olarak ayarlanabilir uyarı levhası paketleri * Ön akslarda kapalı plastik çamurluklar ve arka akslarda düz çinko kaplı çelik levhalar, her ikisi de sıçrama koruması ile * Döner platform üzerindeki alet kutusu için katlanabilir kapak (sıcak daldırma galvanizli) * Yaklaşık 650 x 300 x 600 mm boyutlarında, galvanizli çelik levhadan yapılmış alet kutusu (siyah toz boyalı), sağ tarafta * 15 kutuplu elektrik fişi * 12 / 24 V LED aydınlatma * Arka kısımda çıkarılabilir LED döner lamba * Sinyal lambası kontrolü ile yan işaretleme lambaları * 40 mm çekme çubuğu ve yay ve sıkıştırma kilidi ile yükseklik ayarlı çekme bağlantısı * EBS sinyali aracılığıyla kamyonda gösterilebilen lastik basıncı izleme sistemi (kamyon tarafında kurulum gerektirmez) * Katlanabilir rampalar üzerinde ve sol ve sağ taraftaki eğimli yüzeyde (yaklaşık 860 mm uzunluğunda) kauçuk kaplama * Uzunlamasına destek kirişleri üzerinde, ön destek kirişinden son destek kirişine kadar kauçuk kaplama * Düşük platformun yürüyüş yüzeylerinde sert ağaç zemin * Her iki tarafta 4 adet bağlama yuvası, aynı anda 2 ton bağlama kapasitesi * Aşağıdakilerden oluşan La-Si paketi: 5 çift UVV bağlama halkası, dönebilen ve alçalabilen, her yönde yüke dayanıklı ve dış çerçeveye gömülü – köşelerde 13,4 ton, diğer yerlerde 10 ton. * 3 metre toplam genişlik için 6 çift mekanik katlanabilir destek ayağı (ancak arka eğimde değil) * Yük alanı altında, uzunlamasına yönde ahşap taşıma kızakları * Ön destek kirişinin önünde, yukarı çekilmiş rulo durdurucu, her iki tarafta 1 x 6,4 ton bağlama halkası * Hidrolik katlanabilir rampalar (yaklaşık 4.650 x 720 mm), hidrolik olarak açılabilen sivri uç ve yük tutma vanları ile * Hidrolik yan rampa kaydırma * Arka destek, hidrolik (tek kademeli silindir) * Römork üzerindeki hidrolik debi ayırıcısı (kamyondaki hidrolik pompa kapasitesi 40 litreden fazla ve maksimum 140 litre/dakika ise) * Sıçrama suyuna karşı korumalı hidrolik kontrol bloğu * Çift hatlı hidrolik sistem * Döner halka üzerindeki yük alanı: yaklaşık 1.960 x 2.520 mm, * Arka yük alanı: yaklaşık 6.500 x 2.520 mm (860 mm eğimli yüzey dahil) * Yüklü durumdaki yükseklik: yaklaşık 890 mm +/- 20 mm (hava süspansiyonu) * Şasi, döner platform, rulo durdurucu, katlanabilir genişletmeler ve erişim rampaları sıcak daldırma galvanizlidir. * Akslar, döner halka, çekme bağlantısı, hava tankı vb. siyah renkte boyanmıştır * Yüklü durumdaki yükseklik: yaklaşık 890 mm +/- 20 mm * Fabrika garantisi ile yeni araç * Hatalar ve ön satış saklıdır * Yaklaşık 45. hafta/2026'dan itibaren teslim edilebilir.

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profil 30.0: Ijdpfx Ajl Th Adol Retk * EBS fren sistemi * RDÜ lastık basıncı izleme sistemi * Yaylı hava silindirleri için acil serbest bırakma mekanizması * Kampana frenler * 3 x 11 ton BPW Eco akslar * Yaylı süspansiyon * Arka aks mekanik dengeleme * Yan çarpma koruması * Şasi çerçevesinin arkasındaki döner destek ayakları * Ön ve arka kısımda mekanik olarak ayarlanabilir uyarı levhası setleri * Ön aks için kapalı plastik çamurluk ve arka aks için düz bükülmüş çelik levha etekler, her ikisi de sıçrama koruması ile * Yanlarda ve arkada reflektörlü kontur şeridi * Döner platform üzerindeki alet kutusu için katlanır kapak (sıcak daldırma galvanizli) * Çoklu voltaj sistemi * LED arka farlar * Arka kısımda döner lamba (çıkarılabilir) * 40 mm çekme gözü ve yay ve gergi kilidi ile yükseklik ayarı olan çekme çubuğu * 15 kutuplu elektrik prizi * Her iki yanda 4 adet bağlama yuvası (ancak bağlama çubukları mevcut değil), aynı anda bağlama imkanı * Aşağıdakilerden oluşan La-Si paketi: Döner platformun ana şasisinde önde sol ve sağda 2 adet bağlama gözü (6,4 ton), 5 çift UVV bağlama halkası, her yönde yüke dayanıklı ve dış çerçeveye gömülü - köşelerde 13,4 ton, diğer yerlerde 10 ton. * 3 m toplam genişlik için 6 çift mekanik katlanır destek ayağı (ancak arka eğimde değil) * Yükleme alanının ortasında genişletme plakaları * Arka aks üzerinden yaklaşık 2.100 mm uzunluğunda ekskavatör kolu destek çubuğu (ekskavatör kolu destek çubuğunda yanlarda 2 çift 6,4 tonluk bağlama halkası) * Hidrolik, tek parça rampalar (yaklaşık 3.000 x 720 mm) * Daha sonra hidrolik rampa kaydırma sisteminin takılması için 4 yollu kontrol bloğu * Mekanik yan rampa kaydırma * Döner halka üzerindeki yükleme alanı: yaklaşık 1.960 x 2.520 mm * Boş haldeki yükseklik yaklaşık 1.070 mm * Arka yükleme alanı: yaklaşık 6.500 x 2.520 mm * Boş haldeki yükseklik yaklaşık 910 mm (860 mm'lik rampa eğimi dahil) * Şasi, döner platform, çekme çubuğu ve rampalar sıcak daldırma galvanizli * Akslar, yaylar, hava tankı vb. siyah tonunda boyalı * 235/75 R 17,5 çift lastik * 5.900 kg boş ağırlık * --30.000 kg toplam ağırlık teknik olarak mümkün-- * Araç sıcak daldırma galvanizli * Üretici garantili yeni araç * Hatalar ve ön satış saklıdır * Yaklaşık 44. hafta/2026'dan itibaren teslimat mümkündür.

Durum: ikinci el, azami yük ağırlığı: 31.820 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/1980, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 1980, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal T4 Düşük Tabanlı Römork * Tamburlu frenli SAF akslar * Çift lastik Itjdjy Skl Iepfx Al Rek * Genişletilmiş yükleme yüzeyine sahip düşük taban * Hidrolik yükleme rampaları, hareketli (2 adet) * Üzerinden geçilebilen kuğu boynu * Arka kısımda ek destekler * Döner platformlu tasarım ----Ölçüler ve Yükleme Alanı: Yükleme alanı yaklaşık 9.800 mm * Yükleme alanı genişliği: 2.550 - 3.000 mm * Yükleme alanı yüksekliği: 900 mm ----* İzin verilen toplam ağırlık: 40.000 kg * Faydalı yük: 31.820 kg * Lastik: 235/75R17.5 ----Araç numarası/Vehicle: 11892----Hatalar ve önceden satış saklıdır----Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır. -----Bir araç satın alırken ortaya çıkan tüm resmi işlemler konusunda size her türlü konuda yardımcı olmaktan memnuniyet duyarız. İsteklerinizi ve önerilerinizi bize bildirin, biz de hallederiz. Özellikle aşağıdaki hizmetleri ek ücrete tabi olarak sunabiliriz:----Eski aracınızın değerini düşerek takasa alınması, TÜV/SP denetimi, tam kapsamlı ihracat işlemleri, finansman sağlama, ihracat plakası başvurusu, araçların nakliyesi ve araçların tescili, kurtarma ve araç taşımacılığı.---- ?SİZİN VTS EKİBİNİZ

Durum: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profil 30,0: * EBS-E (elektronik destekli fren sistemi) * RDÜ (Lastık Basıncı İzleme Sistemi) * Yaylı silindirler için acil serbest bırakma cihazı * Kampana frenler * 3 x 11 tonluk BPW Eco akslar * Kaldırma ve alçaltma sistemi ile hava süspansiyonu * Römork üzerindeki toplam aks yükünü gösteren basınç sensörleri ile donatılmış SmartBoard bilgi paneli Itjdpfx Asq Dyvcjl Rsk * Yan çarpma koruması * Ön ve arka kısımda mekanik olarak ayarlanabilir uyarı levhası setleri * Ön aks kapalı plastik çamurluklar ve arka aks düz çinko kaplama çelik koruma panelleri (her ikisi de sıçrama koruması ile) * Şasi platformundaki alet kutusu için katlanır kapak (sıcak daldırma galvanizli) * Yaklaşık 650 x 300 x 600 mm boyutlarında çinko kaplı çelikten alet kutusu (siyah elektrostatik boyalı), sağ tarafta * 15 pinli elektrik bağlantı fişi * 12 / 24 V LED aydınlatma * Arka kısımda çıkarılabilir LED döner lamba * Sinyal lambası ile entegre yan işaret lambaları * 40 mm çekme çubuğu ve yaylı çekme mekanizması ile yüksekliği ayarlanabilir çekme bağlantısı * EBS sinyali üzerinden kamyonda görüntüleme imkanı sunan lastik basıncı izleme sistemi (kamyon tarafında herhangi bir kurulum gerektirmez) * Katlanır rampalar üzerinde ve sol ve sağ taraftaki eğimli rampada (yaklaşık 860 mm uzunluğunda) kauçuk kaplama * Uzunlamasına destek kirişlerinde ön destekten son desteğe kadar kauçuk kaplama * Düşük platformun yürüyüş yüzeylerinde sert ağaç zemin kaplaması * Her iki tarafta, aynı anda 2 tonluk sabitleme imkanı sunan 4 adet halka yuvası * Aşağıdaki parçalardan oluşan La-Si paketi: 5 çift UVV sabitleme halkası (dönebilir ve alçaltılabilir, her yönde yüke dayanıklı ve dış çerçeveye entegre - köşelerde 13,4 ton, diğer yerlerde 10 ton) * 3 m toplam genişlik için 6 çift mekanik katlanır destek (ancak arka eğimde değil) * Yük alanı altında uzunlamasına yerleştirilmiş ahşap tutucular * Ön destek kirişinin önünde yukarı çekilmiş rulo durdurucu, her iki tarafta 1 x 6,4 tonluk sabitleme halkası * Hidrolik katlanır rampalar (yaklaşık 4.650 x 720 mm), hidrolik olarak açılabilen uç kısım ve yük tutma vanaları ile * Hidrolik yan rampa kaydırma * Hidrolik arka destek (tek aşamalı silindir) * Römork üzerindeki hidrolik debi ayırıcı (kamyondaki hidrolik pompa kapasitesi 40 litreden fazla ise, maksimum 140 litre/dakika) * Su sıçramasına karşı korumalı hidrolik kontrol bloğu * Çift hatlı hidrolik sistem * Döner göbek üzerinde yük alanı: yaklaşık 1.960 x 2.520 mm, * Arka yük alanı: yaklaşık 6.500 x 2.520 mm (860 mm'lik eğimli rampa dahil) * Yüklü halde yükseklik: yaklaşık 890 mm +/- 20 mm (hava süspansiyonu) * Şasi, döner göbek, rulo durdurucu, katlanır genişletmeler ve rampalar sıcak daldırma galvanizli. * Akslar, döner göbek, çekme bağlantısı, hava tankı vb. siyah renkte boyalı. * Yüklü halde yükseklik: yaklaşık 890 mm +/- 20 mm * Üretici garantisi ile yeni araç * Hatalar ve ön satışlar saklıdır * Yaklaşık 45. hafta/2026'dan itibaren teslimat

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm Itedperwc R Refx Al Rek ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side * 15-pin power plug * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Fold-out support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision for subsequent installation of container locks in front of the bulkhead * Bolted 400 mm bulkhead made from smooth sheet * Rear stakes bolted * Side boards with spring-assist lifting ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm * Installation of 3 tonne folding lashing rings possible every 600 mm * Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring * Various drillings in front and rear cross members for 1.2 tonne lashing option * Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange-eye painted in black * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Info: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards Itsdpfx Aol Thyxel Rok ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: Itedpfx Ajxptn Dol Rsk * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each Ijdsl Tihuepfx Al Rotk * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing aggregate ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights 12/24 V * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Jost mechanical landing gear front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks at the central locking positions as well as 2 on the front wall * Steel pallet three-way tipper body with reinforced strong side walls (continuous upper side walls with internal pipe reinforcement - without center stanchions - foldable with side wall spring lifter) * Rear stanchions bolted * Combined steel swing doors at rear, asymmetrically split, two-leaf design, can be pivoted and locked at 270° (not foldable) and with additional pendulum frame for automatic rear wall opening during tipping process; locking by galvanized rotating bar lock at the back and central locking. Deactivation function for automatic rear wall feature when tipping backwards with open swing door Ijdpex Hm Rcefx Al Retk * 4 mm fine-grain steel floor plate ----Load Securing: * Each corner with 1 x 5 t lashing point * 4 x 3 t recessed lashing rings per side on the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: * Rear mounting rail for access ramps * 1 pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment for ramps installed below the loading area in the chassis, accessible from the rear ----Tires: * Tire size: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Side walls painted in a desired RAL color (special or metallic paints excluded) – color can be changed up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to prior sale and errors * Sample images ----Delivery Time: * Available immediately from calendar week 29/2026

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit Iodpfx Aox Hm Risl Rstk ----Drawbar / Flange-type Drawbar Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal – no installation required on truck side ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on front right side of chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks installed at the central locking bearings and 2 units on the bulkhead * Steel pallet-drop, 3-way tipper superstructure with reinforced Strong sideboards (continuous upper side panels with internal reinforcement tube – without intermediate stanchions – foldable using board catch spring lifter) * Rear stanchions bolted * Combination steel double rear wing doors – asymmetrically split, swingable and lockable up to 270° (not foldable) – with additional pendulum frame for automatic tailgate opening during tipping; locking via galvanized rotary bolt at the rear and central locking system; deactivation function for the automatic rear wall function when tipping backwards with the wing door open * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point at each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Chassis: * Chassis constructed of fine-grain steel ----Ramps: * Rear fitting track for loading ramps * 1 pair of aluminium loading ramps approx. 3570 x 410 mm (load capacity 10 t per pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps embedded underneath the loading area at the rear of the chassis ----Tyres: * Tyres: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir and landing leg painted in a black tone * Body side boards painted in a RAL colour of your choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion ----Information: * Reinforced superstructure with load securing certificate * Subject to errors and prior sale * Sample images ----Delivery Time: * Ready for immediate delivery ex works from week 29/2026

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Itedpfx Ajrwc R Asl Rsk * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fixture in front of bulkhead for subsequent installation of container locks * 400 mm bolt-on smooth steel front bulkhead * Bolt-on rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear crossmember for 1.2 t lashing option * Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized * Axles, springs, air tank, front support winch, and flange towing eye painted black * Drop sides painted in RAL 9010 pure white * Side walls painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" Itjdsl Thymopfx Al Rok ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 27.940 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t axles * Air suspension with raise/lower function and RtR valve * Start-assist for maneuvering via EBS to the first axle (no truck-side installation) with lifted lift axle +30 mm ride height * Smart-Board information tool mounted on trailer with pressure sensors for total axle load display * Last axle configured as self-steering axle with electro-pneumatic steering lock * Steering lock for the self-steering axle can be activated from the tractor for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop legs and rear swinging supports on chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 2 LED work lights on trailer sides (no truck-side installation) * 7-pin socket at rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with in-cab display option via EBS signal (without truck-side installation) * Mechanically adjustable warning sign holder packages front and rear * Straight steel fenders * Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 mm x H = 500 mm x L = 665 mm) with top folding lid and side doors in the chamfered corners * On each side of the fifth-wheel platform, 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable * Rear drop-in wall, 150 mm high * Rear slant on the fifth-wheel platform to the lowbed, approx. 700 mm long with checker plate and perforated strip for attaching aluminum loading ramps * Fifth-wheel and lowbed platforms with 50 mm clamped wooden planks * Tread plate above axles * Preparation for 3 receptacle shafts under the fifth-wheel platform for storing optional aluminum ramps * Swivel arm as a carrier for connecting lines from the truck to the trailer * Load securing package consisting of: perforated outer frame on the fifth-wheel platform, 45° bent with hole pattern for lashing equipment (2 t lashing force per point with min. 480 mm spacing), 2 x 6.3 t recessed lashing rings on each side, 1 x 16.5 t lashing ring per side on the slope from lowbed platform to fifth-wheel platform, 2 pairs of 16.5 t lashing rings in the lowbed platform (1 pair on the longitudinal beams after the step, 1 pair over the middle axle next to the longitudinal beam), 3 x 13.4 t lashing rings per side on the outer frame (1 at beginning of fifth-wheel frame step, 1 at start of ramp slope, 1 at end of ramp slope), 3 x 10 t lashing rings each side (2 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle), 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear) * Extended excavator arm resting area from the end of the last rigid axle over the steering axle to the rear cross member, continuous with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 mm / Depth front 170 mm; 2 x 6.4 t lashing rings per side in the excavator arm rest Iedpowh Hdxjfx Al Rjtk * 2 wheel recesses per side, 390 mm deep and 640 mm wide, for transporting wheel loaders with a wheelbase of 3,000 – 3,590 mm and a tire diameter of 1,760 mm – with sliding covers * 2nd sliding cover...

Durum: ikinci el, azami yük ağırlığı: 10.080 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2017, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, yükleme alanı hacmi: 6 m³, Üretim yılı: 2017, Donanım: ABS, Stok No: 5820 Itsdpfx Alezdm S Sj Rsk Müller-Mitteltal 3 Yönlü Çelik Tandem Damperli Römork / Alüminyum Rampalar / Galvanizli Şasi / Geniş Lastikler! ---- * Üretici: Müller-Mitteltal * Model: KA-TA-R 13,5 * İlk Tescil: 08/2017 * Azami Yüklü Ağırlık: 13.500 kg * Boş Ağırlık (Ruhsata Göre): 3.420 kg * Faydalı Yük: 10.080 kg * Dingil: 2 x Gigant / Kampanalı Frenler * Süspansiyon: Yaprak yaylı * Lastikler: 385/55 R 19.5, yaklaşık %50, çelik jantlı * Muayene (TÜV): 08/2026 * EBS (Elektronik Fren Sistemi) * Renk: Şasi galvanizli, damper gövdesi mavi * Damper Hacmi: Yaklaşık 6 m³ (5,00m uzunluk x 2,42m genişlik x 0,50m yükseklik) * Çekilebilir alüminyum rampalar * 50 mm halka, yükseklik ayarlı çekme çatalı * Yerde 4 çift menteşeli bağlama halkalı damper gövdesi * Ön tarafta tam yük destek ayağı * Arka tarafta ek destek ayakları (katlanabilir) * Sağ ön köşede paslanmaz çelik alet kutusu * Çeyrek çamurluklar * Yük emniyeti sertifikası * İlk sahip Alman üretimi römork! Alman belgeleri ile! Tek elden! İlan Hakkında Olası Hatalara Dair Not: İlan büyük bir özenle hazırlanmış olmasına rağmen, metin ya da verilen bilgilerde tek tük hatalar olabilir. Hatalar, değişiklikler veya ara satışlardan dolayı hiçbir sorumluluk kabul edilmez. Tüm bilgiler taahhüt dışıdır. Bilgilerinizi kontrol etmek veya ek sorular için lütfen bizimle iletişime geçin.

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and lifting of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange eye: Ijdpfx Aloy Tr His Rjtk * Drawbar with adjustable K80 ball coupling ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: * Support winch at the front * Bolt-on steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking) * 5mm steel floor made of HARDOX-450 or equivalent ----Load securing: * 4 x 3 t UVV lashing rings recessed in the outer frame on each side ----Paintwork: * Axles, air tank, support winch, flange eye painted in black tone * Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit Ijdpfey Tr Hcox Al Rotk * Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24V with galvanized protective housing ----Drawbar / Flange Tow Eye: * Drawbar with K80 ball coupling, adjustable mm (dimensions not specified) ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines ----General Attachments: * Landing leg at the front * Bolted steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter) * Left side wall foldable with drop-side hydromat * Tailgate swinging via automatic hook lock * 5mm steel floor made of HARDOX-450 or equivalent ----Load Securing: * 4 x 3 ton UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, landing leg, flange tow eye painted in black * Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grilles for rear lights, hot-dip galvanized ----Notes: * Sample images ----Delivery Time: * The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026