Kullanılmış Faymonville F-S43-1Aba 4 Meter Extand. Radmulden Ramps! satın al (51.137)

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord info tool installed with pressure sensors for displaying total axle loads per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Closed individual plastic mudguards at the front * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Front section in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable hinged covers (opens to the rear) * Chassis made of high-strength fine-grained steel * Decking above bogie platform: 50 mm softwood; low loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm hardwood * Load securing package including: 2 lashing eyes (6.4 t) front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings left and right at the front and rear on the outer frame; 1 pair each side 10 t lashing rings foldable and lowerable, loadable in all directions and recessed in the outer frame; 5 t lashing rings bolted to the outer frame near wheel recesses (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings within the excavator boom trough * 11 pairs folding extensions for 3 m overall width (not on rear slope) * Storage box (L = 2,470 x W = 570 x H = 250 mm) for width extension planks made from sheet metal, mounted crosswise to the loading area in front of the first rear axle Gbedpfx Aasxmpyke Nel * Excavator boom trough above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with insertable covers (storage for inserts at the front on the bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp displacement * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding extensions, rear supports and ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Koşul: ikinci el, boş ağırlık: 10.650 kg, azami yük ağırlığı: 40.310 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.650 kg, Donanım: ABS, A current and comprehensive inspection and function report is provided with every used semi-trailer. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Gooseneck, straight design at rear - 3 pairs of lashing rings (LC 5,000 daN) Loading Area: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame for attaching tensioning straps (LC 2,000 daN) - Approximately 48 mm thick hardwood floor, anti-slip chequer plate above the axles Axles and Tyres: - BPW axles, two rigid axles and two trailing steering axles - Air suspension with drum brakes, raising/lowering function - Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake System: - WABCO braking system compliant with EU regulations featuring EBS-E (4S3M) Steel Construction: - Structure made from high-strength fine-grain steels - Steel grades: * S355J2+N/S355MC (yield strength 355MPa) * S690QL/S700MC (yield strength 690MPa) Paintwork: - First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Nova Grey Included Accessories: - Spare wheel carrier in front of headboard - 2" kingpin Gbjdpfx Aoxfa E Uoa Nsl - Galvanised steel front wall approx. 400 mm high - Galvanised connection strip at the front with yellow-red air couplings - 4 wheel chocks with holder on the front wall - Galvanised foldable supports under the taper of the loading platform - Mount for a beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, extension, and rear (red at rear) - At the gooseneck and rear panel, left and right: one holder each for warning signs including socket - Mudflap at the rear - European reflective plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Removable plug-in ALU drop sides and rear wall on the gooseneck approx. 2,440 x 400 mm - Rear, galvanised plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1 x 20ft container on loading platform; 1 x 40ft container on loading platform; 1 x 40ft container above gooseneck; 2 x 20ft containers - 7 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Lift axle on front axle with control via TEBS E depending on actual axle load and current load status - Adjustable hook rail for ALU ramp attachments at the rear of the vehicle - Sand layer painted onto checker plates on gooseneck and loading area as slip protection - Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, each with position light - Warning panels equipped with beacon mount - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load diagram - HRM metal coating (High Resistance Metallisation) on the outer frame - Complete steel structure shot-blasted; subsequently, defined visible surfaces hot-metallized with ZINACOR 850 (zinc 85% - aluminium 15%)

Koşul: ikinci el, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Extendable loading platform with rear bevel of approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-piece steel ramps: - One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning - Maximum load per pair: 40,000 kg Accessories included: - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised connection strip at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power pack - Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles - Mounting provision at rear of gooseneck for ALU approach ramps - European reflective signs (red-yellow) at rear of trailer - White reflective tape according to EU regulations at the sides, at the extension, and red at the rear - On the gooseneck and ramps, left and right, a bracket for warning signs including socket - One mount for a revolving beacon at the rear of the trailer Gbsdpfxjyffd Ds Aa Nel - Galvanised folding supports under the platform’s rear slope - Control valves for the ramps mounted on the right side of the trailer - Cover plates to bridge the gap between ramps and platform - Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanised stub posts are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap - 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container - 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Galvanised platform extensions, extendable approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope - Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition - Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light - Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring - Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform - 80 km/h speed stickers at the rear and on both sides

Koşul: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel Gbedsrvw U Sspfx Aa Nol • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Koşul: ikinci el, kilometre: 269.400 km, güç: 353 kW (479,95 bg), ilk tescil: 03/2009, yakıt türü: dizel, boş ağırlık: 16.285 kg, azami yük ağırlığı: 9.715 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 4x4, dingil mesafesi: 4.300 mm, yakıt: dizel, frenler: motor freni, renk: turuncu, şoför kabini: gündüz kabini, vites türü: mekanik, emisyon sınıfı: Euro 4, süspansiyon: çelik-hava, yükleme alanı uzunluğu: 5.600 mm, yükleme alanı yüksekliği: 700 mm, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, her tahrikli, hız sabitleyici, klima, tır çekici bağlantısı, vinç, MAN TGS 26.480 6X4H-2 BL platform kasa ağır hizmet vinçli İlk tescil: 3/2009 sadece 269.400 km (belgeli) kısa sürücü kabini manuel şanzıman klima römork bağlantısı 6X4 Hidrodrive arka aks hava süspansiyonlu 3. aks yönlendirilebilir ve kaldırılabilir Lastikler 385/65 R22.5 diş derinliği yaklaşık %60 Lastikler 315/80 R22.5 diş derinliği yaklaşık %60 Dingil mesafesi 4300 mm Kasa uzunluğu 5600 mm Yan paneller 700 mm yükleme yüksekliği 1150 mm boş ağırlık 16.285 kg Vinç Fassi F310AXP.25 uzaktan radyo kumanda halat tamburu 5. ve 6. hidrolik devre ek ataşmanlar için 4 noktalı destek dört yanal çıkartmalı hidrolik bom 2,75 m / 9.000 kg 4,60 m / 6.225 kg 6,45 m / 4.245 kg 8,40 m / 3.115 kg 10,40 m / 2.425 kg 12,40 m / 1.990 kg Gbodpfxjyu Snhe Aa Nel 14,60 m / 1.640 kg kanca yüksekliği yaklaşık 18,50 metre Birinci elden, bakımlı durumda Alman aracı. İhracat/Net fiyat: 73.900 Euro Tüm bilgiler garanti verilmeden, hata yapma hakkı saklıdır.

Koşul: ikinci el, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, toplam uzunluk: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, Donanım: ABS, Faymonville Telemax F-S43 low loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | stake pockets | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | Dimensions: 13,500 mm + 7,900 mm + 8,100 mm | Errors, input mistakes and prior sale reserved. Godpfx Aswm I Ipja Nebl

Koşul: ikinci el, boş ağırlık: 2.960 kg, toplam ağırlık: 16.000 kg, ilk tescil: 03/2020, | Krone Kasa Değiştirilebilir Şasi | 2960 kg boş ağırlık | 7,30 metre iç uzunluk | 2,5 metre iç yükseklik | Kiralama mümkün | Hemen teslim | Fiyat adet başınadır! | Hata, giriş hatası ve ön satış hakkı saklıdır. Gbjdewzhwtjpfx Aa Nsl

Koşul: ikinci el, kilometre: 295.008 km, güç: 310 kW (421,48 bg), ilk tescil: 10/2017, yakıt türü: dizel, boş ağırlık: 7.196 kg, azami yük ağırlığı: 10.804 kg, toplam ağırlık: 18.000 kg, lastik boyutu: 315/70R22,5 154G, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.700 mm, bir sonraki muayene (TÜV): 09/2026, yakıt: dizel, frenler: motor freni, renk: beyaz, şoför kabini: gündüz kabini, vites türü: otomatik, emisyon sınıfı: hiçbiri, süspansiyon: çelik-hava, ön lastik ölçüsü: 315/70R22,5 154G, arka lastik boyutu: 315/70R22,5 145G, koltuk sayısı: 2, azami hız: 90 km/s, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, hız sabitleyici, immobilizer sistemi, kabin, kamyon kaydı, klima, merkezi kilitleme, çekiş kontrolü, Satış ile İlgili İrtibat Kişisi: Frank Rau / Rusça / İngilizce / Almanca - Gbedpfxsytfi As Aa Njl Bachar Ibrahim / Arapça / İngilizce / Almanca - Tescil hizmeti, Muayene (HU/SP/UVV), Limana transfer 12 vitesli, Çevre pulu: 4 (Yeşil), Otomatik şanzıman, Dizel, Euro6c, Arka aks tahriki, Çeki demiri, Klima, Ana renk: beyaz Donanımda ekstra özellikler: ABS, Takip mesafesi ayarlayıcı, Hava yastığı, Yol bilgisayarı, Diferansiyel kilidi, Sürüşe hazır, Kabin, Kamyon ruhsatı, Düşük gürültü, Hız sabitleyici, Çekiş kontrolü, Video, İmmobilizer, Merkezi kilit, Süspansiyon: Yaprak-havalı, Taşıma kapasitesi (kg): 10804, Sürekli fren (piyasa): Motor freni Kasa tipi: Antos 1842 2017 4x2 Orijinal kilometre Alman aracı 1. el Sergileyiciler için ideal Çeki kirişi, HSN/TSN: 1313/000 Değişiklik ve hatalar olabilir.

Koşul: ikinci el, boş ağırlık: 10.680 kg, azami yük ağırlığı: 29.320 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2011, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 970 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 4 dingilli, döner tabla, havalı süspansiyon, ABS (anti blokaj sistemi), 3 metreye kadar genişletilebilir, bağlama halkaları, hidrolik rampalar, arka destek, ikiz tekerlek, teker çukurları Üst yapı: Hidrolik çıkış rampalı 4 dingilli alçak şasi römork, 4x 10 ton Gigant dingil, kampanalı frenler! Rampa uzunluğu yaklaşık 2.850 mm! Yükleme yüksekliği yaklaşık 970 mm! Gjdjxx A H Ispfx Aa Nsbl Önde yaklaşık 600 mm ve arkada yaklaşık 670 mm teker çukuru yüksekliği! Römorka yeni bir döner tabla takılmıştır! AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve yazım hataları saklıdır!

Koşul: ikinci el, kilometre: 113.111 km, güç: 118 kW (160,44 bg), ilk tescil: 11/2015, yakıt türü: dizel, yakıt: dizel, renk: diğer, vites türü: mekanik, emisyon sınıfı: Euro 6, koltuk sayısı: 2, Üretim yılı: 2015, Donanım: ABS, elektrikli cam sistemi, hidrolik direksiyon, = Diğer seçenekler ve donanımlar = - Hız sınırlayıcı - Radyo-CD çalar - Disk frenler - Sinyal lambası - İmmobilizer = Notlar = Yapı Yıl: 2008 Mercedes Sprinter 516, 2015, 113000 km, Euro 6, Manuel şanzıman, Versalift ET-30 NE XS = Ek Bilgiler = Azami toplam ağırlık: 5.300 kg Üst yapı markası: Versalift ET-30 Gjdpfxoythy Rs Aa Nsbl = Şirket Bilgileri = Banka bilgileri: Rabobank Hesap: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT/BIC kodu: RABONL2U - İşlem öncesi banka bilgilerimizi mutlaka kontrol edin! - Depozito olmadan araç rezervasyonu yapılamaz. - Tüm sunulan araçlarda yazım ve metin hatası olasılığı saklıdır.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2013, renk: diğer, Üretim yılı: 2013, Achse 1: links 10 mm, rechts 10 mm Achse 2: links 8 mm, rechts 8 mm Achse 3: links 10 mm, rechts 10 mm Gjdpfx Aaeutb Efs Njbl = Weitere Informationen = Leergewicht: 8.350 kg

Koşul: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Gsdetrizkspfx Aa Nsbl Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Koşul: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Gbjdpfel Uxdkox Aa Nsl Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Koşul: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Gbsdpstphtmofx Aa Njl Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Koşul: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Loading platform in extendable design with rear taper approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - c. 48 mm thick hardwood flooring, over the axles with checker plate covering Gbjdpeh Etf Rsfx Aa Njl Detachable Two-Part Ramps: - One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function - The trailing steering axles can be locked electromagnetically via reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system according to EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made of high-tensile fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat finish in single-colour Novagrau Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets Accessories Included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings at the galvanized front terminal strip - 4 chocks with holder at the front wall - Mounting at the rear area of the gooseneck for ALU drive-on ramps - Galvanized folding supports under the taper of the loading platform - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading platform - White reflector tape to EU specification on the sides, red at rear and on extension - Electro-hydraulic power pack - On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet - Ramp control valves installed on the right trailer side - One mudguard at the rear of the trailer - Instruction manual and description on USB stick - ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm - The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Extensions, galvanized, extendable by approx. 230 mm per side - Lift axle on the front axle with control - Square climbing rails 20 x 20 mm - Central lubrication system BEKAMAX - F

Koşul: yeni, boş ağırlık: 9.500 kg, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, işletme ağırlığı: 9.500 kg, Donanım: ABS, Loading platform in extendable design: Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8° 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of folding external lashing rings (LC 5,000 daN) 2 pairs of folding external lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality single-color 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic effect paint possible Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Gbjdpfx Aok Eammja Nol Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tires: BPW axles, air suspension, disc brakes (377 mm), with lift/lower function The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually Axle tools Tires 435/50 R 19.5 Accessories included: At the front galvanized connection rail, yellow-red air couplings 4 wheel chocks with holders 2" king pin Galvanized steel front wall, approx. 1600 mm high, EN12642-XL White reflective tape to EU standards on the sides, on the extension, and red at the rear Loading area with heavy-duty hardwood flooring 9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right side of direction of travel Galvanized drop-down supports under the loading platform chamfer Sliding hook-in strips for ALU loading ramps at the rear of the vehicle European reflective signs (red-yellow) at the rear of the trailer A mudflap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket 1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel 4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes Lift axle on the front axle with control via TEBS E depending on current axle load and load status Speed stickers 80 km/h at the rear and on both sides Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon Load gauge for determining axle loads including load chart HRM metallization (High Resistance Metallisation) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallised

Koşul: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm drive-up slope Loading height: 900 mm 1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, beacon, Comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator boom recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral shifting Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net Vehicle available from 11/09/2023 from the Neumünster trade fair. Gbsdpfx Aaenzlg Do Nol Visit us at Nordbau - Stand West 121, right next to the main entrance. Other 3-, 4- and 5-axle low loaders new and used available immediately.

Koşul: ikinci el, makine/araç numarası: YAFTL4005F0017017, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2015, toplam uzunluk: 13.900 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2015, = Additional Options and Accessories = - Drum brakes = Notes = Chassis Kingpin / fifth wheel diameter: 2 inches Kingpin / drawbar height: 120 cm Drum brake: ✓ Structure Year of manufacture: 2015 Special transport Hydraulic ramps: ✓ Length over axles: 880 cm Load floor length: 880 cm (extends to 660 cm) Gooseneck length: 420 cm Low loader: ✓ Maximum width: 3 cm (275 cm) Maximum length: 1540 cm (880 + 660 cm) Extendable: ✓ Telescopic: ✓ = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; left inner tread: 45%; right inner tread: 60% Middle axle 1: Twin tyres; left inner tread: 20%; right inner tread: 30% Middle axle 2: Twin tyres; steered; left inner tread: 55%; right inner tread: 40% Rear axle: Twin tyres; steered; left inner tread: 40%; right inner tread: 50% Weights Unladen weight: 11,750 kg Payload: 61.0 kg gross vehicle weight (GVW): 73,000 kg Functional Body manufacturer: Faymonville F-S44-1ALN Loading height: 85 cm Gjdexyffpspfx Aa Nebl = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: YAFTL413000014309, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2013, toplam uzunluk: 18.600 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.250 mm, süspansiyon: hidrolik, lastik boyutu: 285/70 R19.5, renk: diğer, Üretim yılı: 2013, = Additional Options and Accessories = - Steering axle - Drum brakes = Notes = Chassis Diameter of kingpin / fifth-wheel coupling: 2 inch Drum brake: ✓ Body Year of manufacture: 2013 Special transport Gbjdpfx Asxtp Rvsa Njl Detachable gooseneck: ✓ Length over axles: 540 cm Loading platform length: 665 cm Low-loader: ✓ Maximum width: 3 cm (275 cm) Extendable: ✓ = Further Information = Tyre size: 285/70 R19.5 Axle make: SAF Brakes: Drum brakes Suspension: Hydraulic suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 50%; Right outer tyre tread: 65% First middle axle: Twin tyres; Steered; Left inner tyre tread: 15%; Right inner tyre tread: 15% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 20%; Right outer tyre tread: % Rear axle: Twin tyres; Steered; Left inner tyre tread: 45%; Right inner tyre tread: % Body make: Faymonville STBZ-4VA = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: YAFTL410000011078, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2010, toplam uzunluk: 18.200 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.550 mm, süspansiyon: hava, renk: diğer, Üretim yılı: 2010, Special Transport Length over axles: 560 cm Loading area length: 750 cm Gooseneck length: 500 cm Low loader: ✓ Maximum width: 313 cm Extendable: ✓ Telescopic: ✓ = Further Information = Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% First middle axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Rear axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Gross vehicle weight: 80,000 kg Registration number: Y0101796 = Company Information = For more information on this unit please call: or e-mail: . Godpfxjwid Dls Aa Nebl A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: ***YAMT13XX6K0104043, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.410 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2019, Chassis Chassis height: 87 cm Kingpin / Fifth wheel diameter: 2 inch Kingpin / Drawbar height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading deck length: 930 cm Ramp length: 395 cm Gooseneck length: 415 cm Low-loader: ✓ Maximum width: 300 cm (25 cm per side) Maximum length: 1380 cm Extendable: ✓ Tank Fuel: ✓ = Further information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Axle 1: twin tyres; left outer tyre tread: 60%; right outer tyre tread: 60% Axle 2: twin tyres; left outer tyre tread: 20%; right outer tyre tread: 30% Axle 3: twin tyres; steering; left outer tyre tread: 55%; right outer tyre tread: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Functional Body manufacturer: Faymonville Gbedpfx Asu H D R Eoa Njl Loading platform height: 87 cm Identification Registration number: C505325 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: 3KNG9391, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2003, toplam uzunluk: 9.500 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.050 mm, süspansiyon: hava, lastik boyutu: 215/75 R17.5, renk: diğer, Üretim yılı: 2003, Chassis Tow hitch / eye diameter: 75 mm Special transport Load bed length: 755 cm Hydraulic ramps: ✓ Ramp length: 245 cm Maximum length: 755 cm Maximum width: 255 cm Tank Fuel: ✓ = Further Information = Axle configuration Tire size: 215/75 R17.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Left outer tire tread: 70%; Right outer tire tread: 70% Axle 2: Twin tires; Left outer tire tread: 45%; Right outer tire tread: 55% Weights Gross Vehicle Weight (GVW): 14,000 kg Functional Body manufacturer: King Gbsdpfx Aaeu H Hxrj Nol Loading platform height: 90 cm Identification Registration number: C163145 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: ***SKMDBP14Z3KNG9390, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2004, toplam uzunluk: 9.400 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.050 mm, süspansiyon: hava, lastik boyutu: 215/75 R22.5, renk: diğer, Üretim yılı: 2004, Chassis Chassis height: 100 cm Godpfx Aaou H H Awo Njbl Special transport Loading floor length: 745 cm Length over axles: 100 cm Hydraulic ramps: ✓ Ramp length: 245 cm Max. length: 745 cm Max. width: 255 cm Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 215/75 R22.5 Axle manufacturer: Gigant Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin mounted; Tyre tread left outer: 80%; Tyre tread right outer: 80% Axle 2: Twin mounted; Tyre tread left outer: 60%; Tyre tread right outer: 60% Weights gross vehicle weight (GVW): 14,000 kg Functionality Superstructure brand: King Loading platform height: 100 cm Identification Registration number: C143629 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, kilometre: 399.000 km, güç: 375 kW (509,86 bg), ilk tescil: 09/2018, yakıt türü: dizel, toplam ağırlık: 18.000 kg, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, Donanım: hidrolik arka platform, is filtrasyon filtresi, Kaldırma platformu: ----- VEB+- Klima- Tam hava süspansiyonu- Römork bağlantısıSüspansiyon: Hava süspansiyonu Gbjdexq Sw Hspfx Aa Nsl

Koşul: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle Gbjdpfxeya E A Nj Aa Nol - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm