Kullanılmış Faymonville Max110 Semi-Tieflader satın al (14.270)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment list available on request.
Gooseneck
* With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck
* 3 pairs of lashing rings (LC 5,000 daN)
Load Platform
* Extendable version
* 5 pairs of outwards-folding lashing rings (LC 5,000 daN)
* 3 pairs of outwards-folding lashing rings (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN)
* Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN)
* Approx. 48 mm hardwood flooring, over the axles with checker plate covering
Landing Gear
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres
* 205/65 R 17.5
Axles
* BPW axles and suspension
* 1st axle fixed, all other axles hydro-mechanically forced-steered
* Air suspension with lift/lower valve
Braking System
* In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Steel Construction
* Manufactured from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork
* Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red
* Rims in silver
Included Accessories
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* At the galvanized front connection rail: yellow-red air couplings
* 4 chocks with holders at the front wall
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power pack
* Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included)
* European reflective plates (red/yellow) at the rear of the trailer
* Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer
* Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right
* Mount for a beacon at the rear of the trailer
* Galvanized folding supports under the inclined portion of the load platform
Rcsdev Etx Ejpfx Aatob
* Load gauge to determine axle loads, including load chart
* 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers
* Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg
* 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform
* Galvanized, extendable widening brackets by approx. 230 mm per side
* Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle
* 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN)
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection
* 2 LED reversing lights mounted at the rear
* Acoustic warning signal when reversing
* HRM Metallisation (High Resistance Metallisation)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Area:
* Extendable loading area with rear bevel approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN)
* Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering
Tyres:
* Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F)
TPMS:
* TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data.
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, all axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* Axle tools
Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Rcodpfx Aoy Auifsatjb
Steel Construction:
* Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine
* Second abrasive blasting with corundum for optimal adhesion of the coating system
* Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
Accessories:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection strip
* Spare wheel holder in front of the front wall (without spare wheel)
* Electro-hydraulic power pack
* Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit)
* Attachment bar for ALU loading ramps on gooseneck with integrated impact protection
* At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
* Holder for a beacon at the rear of the trailer
* Galvanized foldable supports under the rear bevel of the loading area
* 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN)
* Axle load gauge with load diagram
* On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection
* On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Full specifications available upon request.
Gooseneck:
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading platform, extendable design:
* Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8°
* 5 pairs of outward folding lashing rings (LC 5,000 daN)
* 3 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame for attaching tension belts (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate over axles
Axles:
* BPW axles and suspension
* 1st axle rigid, all other axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with raise/lower valve
* Axle tools included
Tyres:
* Tyres 245/70 R 17.5 3PMSF, load index (146/146 F)
* Manufacturer at our discretion
* TPMS tyre pressure monitoring system according to ECE R 141
* Data transmission to tractor unit via standardised EBS interface per ISO 11992
* For correct display, the tractor unit must support transmitting and displaying these data
Rodpexbmpfjfx Aatjcb
Landing legs:
* JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Paintwork:
* Complete steel structure shot-blasted automatically after welding
* Second blasting using corundum for optimum coating adhesion
* Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Metallic paint not available
* Coating tested in salt spray test according to ISO 9227-NSS
* Cavities sealed with special wax
Steel structure:
* Steel construction made from high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with indicators
* ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO
* 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Including the following additional equipment:
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on front galvanized connection strip
* Electro-hydraulic unit
* Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit)
* Galvanized folding supports under the rear chamfer of the platform
* 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN)
* Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H)
* Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm)
* Galvanised toolbox integrated into the chamfered gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30?) or
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load Platform
* Double extendable version with rear chamfer approx. 500 mm x 8°
* 6 pairs of outward folding lashing rings (LC 5,000 daN)
* 4 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 1 cross table approx. 250 mm
* Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles
* Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN)
Axles
* BPW axles and suspension, all axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with lift and lower valve
* Axle tool kit
Rcsdpjw Tprzsfx Aatsb
Tyres:
* Tyres 245/70 R 17.5, load index (146/146 F)
* Brand of our choice
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake System:
* Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Paintwork:
High-quality, durable corrosion protection
* High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)
Steel Construction:
Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations
* Lighting 24 volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Including the following additional equipment:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings at the galvanized front wiring panel
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power unit
* Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit)
* Rear gooseneck mounting point for aluminum loading ramps
* Rear hanging rail for aluminum loading ramps
* Galvanized folding supports under the rear chamfer of the load platform
* On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H)
* Removable galvanized rear stanchions (body length approx. 2,560 mm)
* Tool box, galvanized, integrated in the chamfered gooseneck
* 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers
* 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area
* Galvanized wideners, extendable by approx. 230 mm per side
* Movable hanging rails for aluminum loading ramps at the rear of the vehicle
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump
* 2 LED reversing lamps mounted on the rear panel
* HRM Metallization (High Resistance Metallisation). Complete steel structure sh
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX810 Semi-Tieflader 2+6 - 2fach tele
Çağrı
Koşul: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website.
Excerpt from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm
* For tractors: 6 x 4 or 8 x 4
* Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L
* With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer
* Gallows with winch for spare wheel located at the front of the gooseneck
* 3.5 inch kingpin
* Steel front wall approx. 400 mm high
* Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish
* Operating levers on the gooseneck protected by a foldable cover
* Illuminated controls at the gooseneck, with on/off switch
* One 7-pin socket left and right at the rear of the gooseneck for warning sign
* BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2
* Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers
* Access steps to the gooseneck
* Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon
* Mounting adapter for 2 spare wheels
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm
* Hydraulic connection lines between the power pack and the connector plate at the gooseneck
* One LED work light left and right at the rear plate of the gooseneck with separate on/off switches
* Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear.
2-Axle Front Bogie:
Redpfx Aszahp Sjatecb
* Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm
* BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods)
* One 7-pin socket left and right at the rear of the front bogie for warning panels
* Bogie surface finished with painted-in sand coating for slip-resistance
* Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer
* One 7-pin socket for warning panels, left and right at the front bogie, in the axle area
* Extendable extensions of approx. 230 mm per side for a 2-axle bogie
* 1 pair of M42 threaded blocks between the axles of the front bogie
* 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed
Load Bed:
* 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8°
* Load bed length: approx. 11,000 mm
* Technically extendable by approx. 8,200 + 7,700 mm
* Axle spacing: approx. 1,500 mm
* Standard width: approx. 2,750 mm
* Hydraulic coupling pin
* BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2
* Load bed surface finished with painted-in sand coating for slip-resistance
* 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN)
* Permanently welded intermediate platform, approx.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full specification available upon request.
Neck (Gooseneck):
* Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN)
* Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN)
* Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering
Two-piece steel ramps:
* One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm)
* Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm
Landing gear:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)
* Tires 235/75 R 17.5 3PMSF
* TPMS tire pressure monitoring system according to ECE R 141
Axles:
* BPW axles and suspension
* 2 rigid axles, 1 trailing steering axle
* Technical axle load: each 12,000 kg
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Colors:
* Semi-trailer in RAL 3002 carmine red
* Rims silver
* Tarp in RAL 9006 silver
Including accessories:
* 1 spare wheel holder below loading platform, right side in driving direction
Rsdpfey Nu Hkox Aatscb
* 2-inch king pins
* Galvanized steel front wall
* At the galvanized connection strip at the front: yellow-red air couplings
* 4 wheel chocks with holder on the front wall
* 3 height wooden boards
* Galvanized folding supports beneath the ramped section of the loading area
* Height-adjustable tarpaulin structure, approx. 3,960 mm?
* Galvanized front wall with tensioning mechanism for sliding curtains
* EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls)
* 3 pairs of sliding stakes on the loading platform
* The body can be hydraulically widened rear left/right by approx. 750 mm
* Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height
* Upper edge of body approx. 3,960 mm (loaded)
* Driving with an open sliding roof is not permitted and will damage the tarp
* Anti-slip sand coating painted onto checker plates on gooseneck and loading platform
* Cover plates to bridge the space between ramps and loading platform
* Electro-hydraulic unit at the rear under the loading platform
* Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket
* Ramp control valves positioned on the right side of the trailer
* Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm)
* Grating cover in the loading platform's sloped section...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Çağrı
Koşul: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.
Equipment excerpt. Full equipment details available upon request.
Gooseneck:
* Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles
Landing legs:
JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t)
Rcedpfx Asy Aug Deatjb
Tyres:
* Tyres 205/65 R17.5 - brand of our choice
TPMS:
* TPMS tyre pressure monitoring system pursuant to ECE R 141
Axles:
* BPW axles, two rigid axles, two steering axles
* Air suspension with lifting/lowering feature
* Drum brakes
* Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Brake system:
* WABCO braking system according to EU regulations with EBS-E (4S3M)
Electrical system:
* Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3)
* All LED side marker lamps flash synchronously with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Trailer color RAL 3002 Carmine Red
* Wheels Silver Grey
* Tarpaulin RAL 9006 (brilliant direct)
Options included:
* One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket
* 2-inch king pin
* Galvanized steel bulkhead
* Yellow-red air couplings at the galvanized front connection strip
* 4 wheel chocks with holder mounted on the bulkhead
* 3-level wooden boards
* Galvanized folding supports under the loading area chamfer
* Mount for beacon at the rear of the trailer
* Height-adjustable tarpaulin structure – approx. 3,960 mm
* Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm
* EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall)
* 3 pairs of sliding stanchions in the loading area
* The body can be hydraulically widened at the rear to the left and right by approx. 750 mm
* Sliding roof with fold-up portal beam
* Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded)
* Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin
* Rear of the body with closed anodized ALU swing doors
* Hook-in rail for ALU drive-on ramps at the rear of the vehicle
* Control valves for hydraulic body widening mounted on the right trailer side
* White reflective tape in accordance with EU regulations, red tape at the rear
* Electro-hydraulic unit mounted at rear under loading area
* Mud flaps at the rear of the trailer
* European reflective warning signs (red-yellow) at the rear of the tr
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10°
Rjdpfx Aaoy Augwotscb
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Extendable loading platform:
* Loading platform in extendable design with rear bevel approx. 500 mm x 8°
* 8 pairs of foldable lashing rings (LC 10,000 daN)
* 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Two-section steel ramps:
* One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering
* Ramp with hydraulically folding ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position
Axles:
* BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes
* Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually
* Technical axle load: 12,000 kg each
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data.
Landing legs:
* JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel construction automatically shot blasted after welding using a wheel blast system
* Second blasting using corundum for optimal adhesion of paint system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL
* Rear section metallized and painted in RAL 9010 pure white
Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings at the galvanized front connector panel
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the platform’s rear bevel
* Super Grip rubber ma
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website.
Excerpt from the equipment. Full specification available upon request.
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Load area:
* Load area with rear bevel, approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering
Two-part steel ramps:
* 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area
* Ramps with hydraulically foldable sections and hydraulic lifting device
* Maximum load per pair: 30,000 kg
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steer axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Tyres:
* Tyres: 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R 141
Braking system:
* WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel construction:
* High-strength fine-grained steel construction
Rodpfx Aaoy Auhuotscb
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection
* Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
* Wheel rims in silver
Incl. accessories:
* One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket
* 1 spare wheel carrier under the load area on the right
* 2-inch kingpin
* One galvanized steel front wall
* At the galvanized front connection rail: yellow-red air couplings
* 4 wheel chocks with holders at the front wall
* 3-tier wooden planks
* Galvanized folding supports under the rear bevel
* Holder for beacon at the rear of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm
* Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm
* EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls)
* 3 pairs of movable stanchions in the load area
* Body hydraulically expandable to left/right at rear by approx. 750 mm
* Sliding roof with high-lift portal carrier
* Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details upon request.
Gooseneck:
* Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10°
Rsdpfx Aasy Aufmetocb
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform in extendable design:
* Extendable load platform with rear bevel approx. 1,000 mm x 8°
* 6 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be activated via reverse gear and manually
* Air suspension with raise/lower valve
* Axle tool
Brake system:
* Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Steel construction:
* Steel construction of high-strength fine-grained steels
* Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Painting:
* Complete steel structure automatically blast-cleaned after welding with shot-blasting system
* Secondary blasting with corundum for optimum coating adhesion
* Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL
* Wheel rims in silver grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Paint system tested in salt spray fog test according to ISO 9227-NSS
* Cavity sealing with special wax
Electrical system:
* Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098
Accessories included:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection strip at the front
* 4 wheel chocks with holder at the front wall
* Provision at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under the rear bevel of the loading area
* On the gooseneck and rear panel left and right, each with a holder for warning boards including socket
* Load manometer to determine axle loads including load diagram
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm)
* One galvanized toolbox integrated in the beveled gooseneck
* 3 pairs WADER C
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate covering over the axles
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF, brand of our choice
Axles:
* BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function
* The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually
* Axle tools
Brake System:
* WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Rodpfeyvnfgex Aatjcb
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098)
Paintwork:
* Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red
* Rear section metallized and painted RAL 9010 (Pure White)
* Rims in silver
Accessories:
* Spare wheel holder in front of the front wall (without spare wheel)
* 2" king pin
* Galvanized steel front wall approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection rail
* Recess at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under rear bevel of platform
* Bracket for warning beacon at trailer rear
* Brackets on both sides of gooseneck and rear for warning panels incl. socket
* TPMS tyre pressure monitoring system according to ECE R 141
* Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm)
* Galvanized toolbox integrated in the beveled gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container
* Adjustable mounting rails for ALU loading ramps at the vehicle rear
* 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform
* Galvanized outriggers extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control depending on current axle load and load condition
* 2 LED reversing lights mounted on rear panel
* 2 pairs of ferry-
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings
* Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each
* Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Two-part steel ramps:
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable
* Maximum load per pair: 40,000 kg
Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lockout via reverse gear and manual activation
* Air suspension with lift and lower valve
Rcsdpfx Aeyhkq Ueatob
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* TPMS Tyre Pressure Monitoring System according to ECE R 141
Brake system:
* WABCO brake system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection
* Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
Incl. the following additional features:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* Electro-hydraulic unit at the rear, under the loading platform
* On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* One galvanized toolbox, integrated into the chamfered gooseneck
* 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container
* 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each
* One removable galvanized intermediate table with 1 pair of WADER container pockets
* 1 additional hook-on intermediate table, ap
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment details. Complete specification available upon request.
Rcjdpfsyhkrrox Aatjb
Gooseneck:
* Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10°
* 3 pairs lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Loading platform:
* Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
* 6 pairs outward-folding lashing rings (LC 5,000 daN)
* 2 pairs outward-folding lashing rings (LC 10,000 daN)
* 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN)
* Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN)
* Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles
Two-piece steel ramps:
* One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm)
* Ramp with hydraulically foldable ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load capacity per pair: approx. 40,000 kg
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 trailing steered axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lifting and lowering valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Tyres:
Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tire Pressure Monitoring System (TPMS) according to ECE R 141
Paintwork:
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL
* Wheels in silver grey
Accessories included:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm)
* Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear beneath the loading area
* On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm)
* One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller
* Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller
* One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch
* Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area
* Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Loading Platform:
* Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN)
* Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate
Two-piece Steel Ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable
* Maximum load per pair: approx. 40,000 kg
Landing Gear:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake System:
* WABCO braking system in accordance with EU regulations, with EBS-E (2S2M)
Redpfx Aeyhkqzsatocb
Tires:
* Tires 235/75 R 17.5 3PMSF – brand at our discretion
TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection
* Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL
* Wheels in silver-gray
Accessories included:
* 2-inch kingpin
* Galvanized steel front wall approx. 400 mm high
* Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Painted sand layer as anti-slip on the checker plates above the kingpin and platform
* Electro-hydraulic unit at rear beneath the loading platform
* On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm)
* Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller
* Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley
* One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch
* Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform
* Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status
* 7 pairs inst...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 205er
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Extract from the equipment list. Complete specification upon request.
Gooseneck:
* Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading area:
* Extendable loading bed
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN)
* Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
* Tyre size 205/65 R 17.5, twin-mounted
Rcsdpfox Uvlrjx Aatsb
Axles:
* BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function
* The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually
Brake system:
* Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Steel structure:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
* High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red
* Rear section metallised and painted in RAL 9010 Pure White
* Rims in silver
Electrical system:
* Electrical system according to EU regulations
Lighting:
* 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Included accessories:
* 2-inch kingpin
* Galvanised steel front wall approx. 400 mm high
* Spare wheel carrier in front of the front wall
* Yellow-red air couplings mounted on the galvanised connection rail at the front
* 4 wheel chocks with holders on the front wall
* Mountings at the rear of the gooseneck for aluminium loading ramps
* Galvanised folding supports under the rear slope of the loading area
* Bracket for a beacon at the rear of the trailer
* Yellow reflective tape as per EU regulations at sides, extension, and rear
* Mounts for warning plates, left and right on the gooseneck and rear panel, including socket
* Mudflap at the rear of the trailer
* Manual and documentation on USB stick
* European reflective plates (Red-Yellow) at the rear
* 80 km/h speed stickers at the rear and both sides
* Audible reverse warning signal
* Load pressure gauge for axle load determination, including load chart
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Partial equipment list. Full specifications available on request.
Gooseneck:
- Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, approx. 30 mm thick
Loading area:
- Telescopic loading area with rear bevel approx. 1,000 mm x 8°
- Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
- Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each)
- 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN)
- 4 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
Tyres 235/75 R17.5 3PMSF, brand at our discretion
- TPMS tyre pressure monitoring system according to ECE R 141
- Data transmission to the truck via the standardised EBS interface per ISO 11992
- For correct display, the truck must be capable of transmitting and displaying this data.
Axles:
- BPW axles and suspension, 2 fixed axles, 3rd axle self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activatable via reverse gear and manually
- Air suspension with lift and lower valve. Axle tools
Redpfx Ajw Tpq Djatjcb
Brake system:
- WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Electrical system:
- Electrical system in accordance with EU regulations
- LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Steel structure:
Steel frame made of high-strength fine-grain steels.
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- Entire steel structure is automatically blasted after welding using a turbine blasting system
- Second blasting with corundum for optimal coating adhesion
- HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection
- Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White
- No metallic paint possible
- Paint finish tested in salt spray test per ISO 9227-NSS
- Sealing of cavities with special wax
Including the following accessories:
- Mounts for warning signs on both sides at the gooseneck and at the rear, including socket
- Spare wheel holder in front of the front wall (without spare wheel)
- 2-inch kingpin
- Galvanized steel front bulkhead, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection panel
- Galvanized folding supports under the loading area bevel
- Hardwood impact protection on the rear wall from gooseneck to loading platform
- 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN)
- Aluminium side walls and tailboard on the gooseneck
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 205er
Çağrı
Koşul: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck
* With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading platform
Loading platform in extendable design
* 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN)
* 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate
Landing legs
* JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Axles
* BPW axles, two rigid, two self-steering trailing axles, with drum brakes
* Air suspension with lifting/lowering function
* Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually
* Tyres: 205/65 R 17.5
Rcjdpou Sd U Usfx Aatjb
Brake system
* Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit
Steel construction
* Made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Paintwork
* First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red
* Rear section metallized and painted in RAL 9010 (Pure White)
* Wheel rims in silver
Included accessories
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection bar at the front
* 4 wheel chocks with holder set on the front wall
* Mount at the rear of the gooseneck for aluminum loading ramps
* Galvanized folding supports under the loading platform bevel
* Holder for beacon light at the rear of the trailer
* Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations
* On both sides of the gooseneck and rear panel, holder for warning plates including socket
* TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data
* On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* Galvanized toolbox integrated into the beveled gooseneck
* 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container
* Sliding mounting rails for aluminum loading ramps at the rear of the vehicle
* 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* Galvanized crosswise holder under the loading platform
* Galvanized extendable wideners, extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition
* 5 pairs of rec
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
Rcjdpfxjw Tpqwo Aatjb
* Hardwood flooring approx. 30 mm thick
Load platform:
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section
* Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each
* Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H))
* 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 5 pairs of outward foldable lashing rings (LC 5,000 daN)
* 3 pairs of outward foldable lashing rings (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN)
* Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN)
One-piece steel ramps:
* 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramp with hydraulic lifting system, hydraulically adjustable
* Maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 axles rigid, 1 axle self-steering
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be engaged via reverse gear and manually
* Air suspension with lift and lower valve
* Axle tools
Tyres:
* Tyres 235/75 R 17.5 3PMSF – Brand of our choice
* TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data
Brake system:
* WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system as per EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* Complete steel structure automatically shot-blasted with turbine system after welding
* Second sandblasting with corundum for optimum adhesion of the coating system
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection
* Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL
* Rims in silver
* Rear section metalliz
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
FaymonvilleF-S42-111A SEMI DIEPLADER/TIEFLADER/LOWLOADER
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2020, renk: kırmızı, Üretim yılı: 2020, Donanım: ABS, Rear axle 1: Twin tyres
Rear axle 2: Twin tyres; Steered
Unladen weight: 8,060 kg
Loading platform height: 86 cm
Extendable superstructure: Yes
Technical condition: Very good
Optical condition: Very good
Price: On request
FAYMONVILLE F-S42-111A SEMI LOWLOADER
2x SAF axles
1x Steering axle (trailing)
Tyre size
Extendable loading platform
Length 680 cm + 420 cm extendable, total loading platform length 1,100 cm
Loading platform width 254 cm
Loading platform height ±86 cm
Gooseneck length 330 cm
Lashing eyes, pockets, twistlocks
Follow us on Instagram: geurtstrucks
Rcodpfx Aex Upxxjatob
Low loader is year of manufacture 2016, but sold as new in 2020
Wir sprechen Deutsch
Hablamos Español
We speak English
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-A-Doppeltele-Semi-zwangsg.
Çağrı
Koşul: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report.
Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Loading Platform:
- Extendable loading platform with rear bevel approx. 500 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 4 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN)
- 1 intermediate table 250 mm
- Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN)
- Approx. 48 mm hardwood flooring, checker plate over the axles
Axles and Tyres:
- BPW axles, hydro-mechanical forced steering
- Technical axle load: 12,000 kg
- Air suspension with lifting/lowering valve
Rcodpfov Hr Axsx Aatob
- Axle tool kit
- Tyres: 235/75 R17.5
Braking System:
- Braking system compliant with EU regulations, EBS-E (4S3M)
Included Accessories:
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection panel
- 4 wheel chocks with holders on the front wall
- Spare wheel with holder in front of the front wall
- Electro-hydraulic unit
- Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring
- Recess at rear of gooseneck to accommodate ALU loading ramps
- Galvanized, extendable widening by approx. 230 mm per side
- European reflector panels (red-yellow) at the rear of the trailer
- White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear
- Holders for warning signs on both the gooseneck and rear plate, including sockets left and right
- Galvanized folding supports under the rear bevel of the loading platform
- Mounting bracket for a beacon at the rear of the trailer
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard
- Mud flap at the rear of the trailer
- Manual and documentation
- On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm
- Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm)
- 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container
- 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform
- Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle
- Lift axle on the front axle with control via TEBS E according to current axle load and loading condition
- Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- Beacon bracket on the warning signs
- Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring
- Painted sand layer on checker plate above king pin and loading platform for slip resistance
- 80 km/h speed sticker at the rear
- Load gauge for determining axle loads including load chart
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
FaymonvilleMAX Trailer 4-A-Tele-Semi-Rampen-zwangsg
Çağrı
Koşul: ikinci el, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report.
Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick
Extendable loading platform:
- Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
Rjdjyffd Djpfx Aatjcb
- 5 pairs of folding external lashing rings (LC 5,000 daN)
- 3 pairs of folding external lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering
Axles and tyres:
- BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered
- Technical axle load: 12,000 kg
- Air suspension with lift/lower valve
- Tyres: 245/70 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
Two-piece steel ramps:
- One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning
- Maximum load per pair: 40,000 kg
Accessories included:
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised connection strip at the front
- 4 wheel chocks
- One spare wheel
- Electro-hydraulic power pack
- Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles
- Mounting provision at rear of gooseneck for ALU approach ramps
- European reflective signs (red-yellow) at rear of trailer
- White reflective tape according to EU regulations at the sides, at the extension, and red at the rear
- On the gooseneck and ramps, left and right, a bracket for warning signs including socket
- One mount for a revolving beacon at the rear of the trailer
- Galvanised folding supports under the platform’s rear slope
- Control valves for the ramps mounted on the right side of the trailer
- Cover plates to bridge the gap between ramps and platform
- Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2
- On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm
- Rear galvanised stub posts are removable (body length approx. 2,560 mm)
- One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap
- 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container
- 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform
- Galvanised platform extensions, extendable approx. 230 mm per side
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope
- Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition
- Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light
- Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring
- Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform
- 80 km/h speed stickers at the rear and on both sides
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-A-Mega-Tele-Semi-Rampen
Çağrı
Koşul: ikinci el, boş ağırlık: 11.900 kg, azami yük ağırlığı: 39.060 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Rear gooseneck in straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable Load Floor:
- Extendable load floor
- 5 pairs of swivel-out lashing rings (LC 5,000 daN)
- 3 pairs of swivel-out lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the load floor (LC 10,000 daN)
- Cutouts in the external frame of the load floor for attaching tension straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, checker plate over the axle area
Two-piece Steel Ramps:
Redpfx Aasxwnfmjtocb
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment
- Maximum load per pair: 40,000 kg
Axles and Tyres:
- BPW axles, two rigid axles, two steering axles
- Air suspension, drum brakes, with lift/lower function
- The self-steering axles feature an electro-magnetic reverse lock, activated automatically when reversing or manually
- Axle tools
- Tyres: 205/65 R17.5
- TPMS tyre pressure monitoring system according to ECE R 141
Included Accessories:
- One spare wheel with mount in front of front wall
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the front galvanized connection strip
- 4 wheel chocks with holders on the front wall
- Galvanized folding supports under the inclined section of the loading area
- A mounting bracket for beacon at the rear of the semi-trailer
- Galvanized extendable extensions, approx. 230 mm per side
- White reflective tape on side in compliance with EU regulations, extension and rear red
- One bracket per side at gooseneck and rear panel for warning boards, including socket
- One mudguard at the rear of the semi-trailer
- European reflector plates (red-yellow) at rear
- ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm, plug-in design
- The rear galvanized insert stakes are removable. Total body length approx. 2,560 mm
- 7 pairs WADER container pockets:
- 1x 20ft container on the load floor
- 1x 40ft container on the load floor
- 1x 40ft container above the gooseneck
- 2x 20ft containers
- Support stand with 1 pair WADER container pockets (king pin load approx. 20,000 kg)
- 7 pairs of stake pockets for insert stakes 100 x 50 mm in outer frame of load area
- Lift axle on front axle with control via TEBS E depending on current axle load and loading condition
- Sliding mounting rail for ALU approach ramps at the rear of the vehicle
- Sanded, painted non-slip coating applied to checker plates on the gooseneck and load floor
- Four extendable warning boards (approx. 400 mm extension) approx. 423 x 423 mm with position lamp
- Bracket for beacon on the warning boards
- 80 km/h speed stickers on rear and both sides
- Load gauge for axle load determination including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Çağrı
Koşul: ikinci el, boş ağırlık: 10.350 kg, azami yük ağırlığı: 37.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: turuncu, Üretim yılı: 2018, işletme ağırlığı: 10.350 kg, Donanım: ABS,
Küçük ilan
Nordland
3.485 km
Platform römorku
Faymonvilletelemax flatbed semi trailer w/ 27 meter extension
Çağrı
Koşul: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457
Specifications:
Model year: 2012
3 axles
Length: 1325 cm
Net weight: 12,178 kg
Gross vehicle weight: 59,000 kg
12-ton axles
Steerable on all axles
Ready for delivery
Description:
2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension.
The extension measures 14 meters.
Rcedjy T D Sqjpfx Aatob
Ready for delivery.
TÜV: Yes
EU-approved until: 28.02.2027
Own weight: 12,178
Total weight: 59,000
Model: Telemax flatbed semi-trailer with 27-meter extension
= Further information =
Please contact ATS Norway for more information.
Küçük ilan
Gilze
2.728 km
Düşük yükleyici
FaymonvilleSTN-3U / HYDRAULIC RAMP / LIFT AXLE / SEMI TRAILER
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, toplam uzunluk: 12.700 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: mavi, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment =
- Lift axle
= Remarks =
SAF axle with drum brakes.
1 x lift axle.
1 x steering axle – self-tracking / trailing steering.
Rcedpfxsy Daxzs Aatjb
= Further Information =
Axle configuration
Tire size: 235/75R17.5
Brakes: Drum brakes
Suspension: Air suspension
Rear axle 1: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40%
Rear axle 2: Twin tires; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%
Rear axle 3: Twin tires; Steered; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50%
Weights
Unladen weight: 10,500 kg
Payload: 44,500 kg
Gross vehicle weight: 55,000 kg
Identification
Type number: STN-3U / HYDRAULIC RAMP / LIFT A
= Company Information =
ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from the published texts.
Sizin için aramayı kolaylaştırıyoruz: "faymonville max110 semi-tieflader"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.


























































































































































































































