İkinci El Max Trailer 3-Achs-Tele-Semi-Nachlaufgelenkt Satın Al (55.053)

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light Prsdsunrapopfx Abroc - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: ikinci el, boş ağırlık: 11.880 kg, azami yük ağırlığı: 49.920 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 05/2026, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Kuğu boynu: -Yaklaşık 750 mm x 10°'lik arka eğime sahip kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) -30 mm kalınlığında sert ahşap kaplama Yükleme alanı: -Yaklaşık 1.000 mm x 8°'lik arka eğime sahip, çekilebilir yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Gerdirme bantlarının takılması için yükleme alanının dış çerçevesindeki boşluklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Rampalar: -Yaklaşık 2.750 + 1.400 x 800 mm ölçülerinde, yaklaşık 48 mm kalınlığında sert ahşap kaplamalı, galvanizli iki parçalı çelik rampalar -Hidrolik olarak yukarı ve aşağı hareket ettirilebilen rampa parçalarına, hidrolik kaldırma mekanizmasına ve hidrolik olarak hareket ettirilebilen bir rampaya sahip -Çift başına maksimum yük: 40.000 kg Dorse destek ayakları: -24 ton kaldırma kapasitesine (50 ton test yükü) sahip 2 vitesli şanzımanlı JOST dorse destek ayakları (mekanik) Akslar ve lastikler: -BPW akslar, iki sabit aks, iki takip eden dönen aks -Hava süspansiyonlu, tamburlu frenli, kaldırma/indirme fonksiyonlu -Takip eden dönen akslar, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Lastikler 235/75 R17.5 Boya: -Kaplama sisteminin optimum yapışması için korund ile yapılan yüzey hazırlığı -Tüm araç şasisinin ZINACOR 850 (85% çinko/15% alüminyum) ile HRM metalizasyonu -2 kat 2K üst kat boya ile son kat boyama, tek renk DB 7350 Novagrau Standart olarak dahil olan aksesuarlar: -Kuğu boynunda ve arkada, sol ve sağ tarafta, uyarı levhaları için birer adet tutucu, priz dahil -Tutucu ile birlikte bir yedek lastik -2" Kral pim -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön panel -Ön taraftaki galvanizli bağlantı şeridinde, sarı-kırmızı hava bağlantı elemanları Pedpfxozp Ntvs Abrorc -4 adet takoz ve tutucu -Yükleme alanının eğiminin altında galvanizli katlanır destek ayakları -Dorrenin arkasında, etrafı aydınlatan bir lamba için bir tutucu -Rampalar ve yükleme alanı arasındaki boşluğu kapatmak için kapak levhaları -AB yönetmeliklerine uygun olarak yanlarda ve açılır kısımda beyaz reflektör şerit, arkada kırmızı -Arka tarafta, yükleme alanının altında elektro-hidrolik ünite -Rampalar için kontrol vanaları, dorse sağ tarafında -Arka tarafta çamurluk -Avrupa reflektör levhaları (kırmızı-sarı), dorse arka tarafında -USB çubuğunda kullanım kılavuzu ve açıklama -Yaklaşık 400 mm açılabilen dört adet uyarı levhası, yaklaşık 423 x 423 mm boyutlarında, bir konum lambası ile -Kuğu boynunda, takılabilir ALU yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm -Arka, galvanizli takılabilir çerçeveler çıkarılabilir (yapının uzunluğu yaklaşık 2.560 mm) -Yükleme alanında, 1x 20ft, 2x 20ft veya 1x 40ft konteyner için 4 çift WADER konteyner cebi -Yükleme alanının dış çerçevesinde 100 x 50 mm takılabilir çerçeveler için 7 çift çerçeve cebi -Galvanizli, her iki tarafta yaklaşık 230 mm açılabilen genişletmeler -Ön aks üzerinde, mevcut aks yüküne ve mevcut yükleme durumuna bağlı olarak TEBS-E tarafından kontrol edilen kaldırılabilir aks -Yükleme alanının eğiminin dış çerçevesinde, her 200 mm'de 20 x 20 mm kare tırmanma çıtaları -Kuğu boynundaki ve yükleme alanındaki tırtıklı saclarda, kaymayı önlemek için yüzeye entegre edilmiş bir kum tabakası -BEKAMAX

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear Prodpfx Abjup U Hzorsc - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Prodpfx Absuqlmnorjc Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: ikinci el, boş ağırlık: 11.200 kg, azami yük ağırlığı: 36.800 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square rungs as climbing bars and widening in the lower area - Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers above the wheel recesses (W 670 mm) – max. point load 5 t per cover - Recess in the bevel and extending into the loading area for the excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood covering - Ramp with hydraulically foldable ramp sections, hydraulic lifting mechanism, and hydraulic side shift - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system as per ECE R 141 - Tires: 235/75 R17.5 3PMSF Predpfx Aoyyldusbrec Accessories included: - On the gooseneck and at the rear, left and right, each with a bracket for warning signs, including socket - One spare wheel with holder in front of the front wall - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized connection rail at the front - 4 wheel chocks with holder - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Cover plates to bridge the gap between ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension; rear in red - Electro-hydraulic unit at rear, under the loading area - European reflective signs (red-yellow) at the rear of the semi-trailer - Four extendable warning signs approx. 423 x 423 mm each with a position light, extendable by about 400 mm - Bracket for beacon on the warning signs - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading surface - One removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing bars every 200 mm on the outer frame of the loading area bevel - On the checkered plates on the gooseneck and the loading area, painted-on sand layer as slip protection - Speed sticker 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load chart

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Kuğu boynu: •Yaklaşık 750 mm x 10°'lik arka eğime sahip kuğu boynu •3 çift bağlama halkası (LC 5.000 daN) •30 mm kalınlığında sert ahşap kaplama Çekilebilir tasarımlı yük platformu: •Yaklaşık 1.000 mm x 8°'lik arka eğime sahip çekilebilir tasarımlı yük platformu •Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) •Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) Podezr Egdjpfx Abrorc •Yük platformunun ön tarafında yatar pozisyonda 1 çift bağlama halkası (LC 10.000 daN) •Gergi bantlarının takılması için yük platformunun dış çerçevesindeki boşluklar (LC 2.000 daN) •Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Akslar ve lastikler: •BPW akslar, hidro-mekanik olarak zorunlu olarak yönlendirilir •Teknik aks yükü: 12.000 kg •Kaldırma ve indirme valfli hava süspansiyonu •ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi •Lastikler 235/75 R17.5 3PMSF Boya: •Kaynak yapıldıktan sonra tüm çelik yapı, kum püskürtme makinesiyle otomatik olarak temizlenir •Kaplama sisteminin optimum yapışması için ikinci kum püskürtme işlemi korundum ile yapılır •En iyi korozyon korumasını sağlamak için tüm araç şasisinin HRM metalizasyonu ZINACOR 850 (85% çinko / 15% alüminyum) ile yapılır •Son kat boya, 2 kat 2K üst kat boya ile tek renk olarak DB 7350 Novagrau renginde uygulanır •Arka kısım metalize edilerek RAL 9010 (Saf Beyaz) renginde boyanır •Boya kaplaması, ISO 9227-NSS'ye göre tuzlu su püskürtme testinde test edilir •Boşlukların özel balmumu ile yalıtılması Elektrik sistemi: •AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) •Tüm yan işaret lambaları, sinyal lambası ile birlikte yanıp söner •Ön bağlantı şeridindeki ASPÖCK-UNIBOX, 24N, 24S ve 15 pinli prizlerle donatılmıştır Pakete dahil olan aksesuarlar: •2" Kral mandalı •Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar •Ön galvanizli bağlantı şeridinde sarı-kırmızı hava bağlantı elemanları •Ön duvara monte edilmiş 2 adet fren pabucu •Ön duvarın önünde bir adet yedek tekerlek ve tutucu •Elektro-hidrolik güç ünitesi •Önden ve arkadan, kablolu uzaktan kumanda ile basınç düğmeleri aracılığıyla çalıştırılabilen yardımcı direksiyon, aksların tek şerit kontrolü ile •Römorkun arkasında Avrupa reflektör tabelaları (Kırmızı-Sarı) •AB yönetmeliklerine uygun beyaz reflektör bandı, yanlarda ve çekilebilir kısımda, arkada kırmızı •Kuğu boynunda ve arka kısımda, sol ve sağ tarafta uyarı panoları için birer tutucu, priz dahil •Aracın arkasındaki ALU rampalar için kaydırılabilir bağlantı şeridi •Yük platformunun eğiminin altında galvanizli katlanır destekler •Römorkun arkasında bir çamurluk •Kullanım kılavuzu ve açıklama •BEKAMAX (Pico) merkezi yağlama sistemi, normal yağ NLGI-2 ile ve pompanın etrafındaki çıkarılabilir koruma ile •Kuğu boynunda, takılabilir ALU yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm •Arka galvanizli bağlantı elemanları çıkarılabilir (yapının uzunluğu yaklaşık 2.560 mm) •Yük platformunda 3 çift WADER konteyner cepleri, 1x 20 ft, 1x 30 ft veya 1x 40 ft konteyner için •Yük platformunun dış çerçevesinde 100 x 50 mm boyutlarında bağlantı elemanları için 6 çift cep •Sürüş yönünde sağ tarafta, yük platformunun altında INOX 1.500 x 390 x 810 boyutlarında bir alet kutusu •Yaklaşık 400 mm uzatılabilen dört uyarı panosu, yaklaşık 423 x 423 mm boyutlarında, bir konumlandırma lambası ile •Kablolu uzaktan kumandaya ek olarak, tek şerit kontrolü için alıcıda kontrol lambaları bulunan, radyo uzaktan kumandası •Kuğu

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° Prodpfx Aeyxc Eyebrjc - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Durum: ikinci el, makine/araç numarası: YE73SAAX0HB206959, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2013, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.800 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, = Ek Özellikler ve Aksesuarlar = - Kampana frenler = Notlar = Şasi Çekme piminin/dorse bağlantısının çapı: 2 inç Çekme piminin/dingil yüksekliği: 120 cm Kampana fren: ✓ Özel taşıma Predpfx Abswg Elfjrjc İki parçalı yol plakaları: ✓ Hidrolik rampalar: ✓ Yükleme alanının uzunluğu: 930 cm Maksimum genişlik: 290 cm (250+20+20) Maks. uzunluk: 1530 cm Genişletilebilir: ✓ Uzatılabilir: ✓ = Ek Bilgiler = Genel Bilgiler İmalat yılı: 2013 Plaka: QARV573 Aks Konfigürasyonu Aks markası: Bpweco Frenler: Kampana frenler Süspansiyon: Hava süspansiyonu Ön aks: Lastik ölçüsü: 235/75 R17.5; Lastik diş derinliği sol: %55; Lastik diş derinliği sağ: %40 Orta aks: Lastik ölçüsü: 235/75 R17.5; Lastik diş derinliği sol: %50; Lastik diş derinliği sağ: %30 Arka aks: Lastik ölçüsü: 235/75 R22.5; Lastik diş derinliği sol: %30; Lastik diş derinliği sağ: %60 Ağırlıklar Boş ağırlık: 12.890 kg Yük kapasitesi: 26.110 kg Toplam ağırlık: 39.000 kg Fonksiyonel Yükleme alanının yüksekliği: 90 cm = Şirket Bilgileri = Bu araç hakkında daha fazla bilgi için lütfen şu numarayı arayın: veya şu e-posta adresine yazın: . Ürün yelpazemizin tamamına şu adresten ulaşabilirsiniz: . Envanterimizdeki haftalık güncellemeler için lütfen haber bültenimize abone olmayı unutmayın.

Durum: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip Prodpfxeiu Er Aj Abroc - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durum: yeni, boş ağırlık: 12.000 kg, azami yük ağırlığı: 54.000 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear tapering approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear tapering approx. 1,000 mm x 8° - 5 pairs of foldable lashing rings (LC 5,000 daN) - 3 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the outer frame of the platform for anchoring straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles checker plate Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Brake system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-strength fine-grained steel Axles and tires: - BPW axles and suspension, first axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle toolbox - TPMS tire pressure monitoring system according to ECE R 141 - Tires 245/70 R 17.5 3PMSF Included accessories: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - At the front galvanized connection strip, yellow-red air couplings - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear steering, controllable from front and rear via cable remote control (push button), with axle alignment monitoring - European reflective plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and extension, red at the rear - Bracket for warning signs on left and right of the gooseneck and at the rear, with socket included - Galvanized, extendable side extensions approx. 230 mm per side - Bracket for a revolving beacon at the rear of the trailer - Galvanized drop down supports under the angled part of the loading platform - One mudflap at the rear of the trailer Prjdpfsykpbkox Abrsc - Manual and description on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable guard around the pump - ALU plug-in sideboards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck - Note: The box covers the oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of loading platform - Sliding plug-in rail for ALU drive-on ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area bevel - Lift axle on the front axle with control by TEBS-E in accordance with current axle load and loading condition - Four warning panels, approx. 400 mm extendable, size approx. 423 x 423 mm, equipped with position lamps - Bracket for revolving beacon on the warning panels - Wireless remote for rear steering, in addition to cable remote, with indicator lights on the receiver for axle alignment monitoring - Painted sand coating on the checker plate sections of the gooseneck and platform as anti-slip protection - 80 km/h speed limit sticker at rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Prsdst Ag Uwopfx Abrec Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1992, süspansiyon: hava, lastik boyutu: 9.5R17.5, renk: kırmızı, Üretim yılı: 1992, Kendi kendini takip eden aks / izleyen direksiyon. Uzatılabilir. Yükleme alanı uzunluğu: 930 cm x 253 cm Yükleme yüksekliği: 90 cm. Uzatılabilir. = Ek Bilgiler = Aks Konfigürasyonu Lastik Ebadı: 9.5R17.5 Frenler: Kampana frenler Süspansiyon: Hava süspansiyonu Arka Aks 1: Çift lastikli; Lastik diş derinliği sol iç: %30; Lastik diş derinliği sol dış: %30; Lastik diş derinliği sağ iç: %30; Lastik diş derinliği sağ dış: %30 Arka Aks 2: Çift lastikli; Lastik diş derinliği sol iç: %30; Lastik diş derinliği sol dış: %30; Lastik diş derinliği sağ iç: %30; Lastik diş derinliği sağ dış: %30 Arka Aks 3: Çift lastikli; Yönlendirilebilir; Lastik diş derinliği sol iç: %30; Lastik diş derinliği sol dış: %30; Lastik diş derinliği sağ iç: %30; Lastik diş derinliği sağ dış: %30 Podsy N S Rmopfx Abrsrc Ağırlıklar Boş ağırlık: 9.985 kg Yük kapasitesi: 35.015 kg Toplam ağırlık: 45.000 kg Tanımlama Tip numarası: SD 31 / YARI RÖMORK / UZATILABİLİR = Şirket Bilgileri = TÜM FİYATLAR İHRACAT İÇİN NETTİR, Joris Versteijnen (Hollanda-Almanya-İngiltere), Wouter Greutink (Hollanda-Almanya-İngiltere-İspanya-İtalya), Rusça konuşuyoruz. Doğru bilgi vermek için elimizden geleni yapıyoruz. Ancak, yayınlanan metinlerden herhangi bir hak talep edilemez.

Durum: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of outwards folding lashing rings • 1 pair of flat lashing rings at the front of the loading platform • Cut-outs in the outer frame for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate covering above axles Landing gear: • JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles • Technical axle load: 12,000 kg • 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Braking system: • WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M) Paintwork: • First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single colour MB 7350 Novagrau • Rear section metallised and painted RAL 9010 (pure white) Steel construction: • Fabricated from high-tensile fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Equipment: • One spare wheel with holder in front of the bulkhead • 2" kingpin • Galvanised steel front bulkhead approx. 400 mm high • Yellow-red air couplings on galvanised connection strip at the front • 2 wheel chocks with holder mounted to the bulkhead • Provision at rear of gooseneck for ALU loading ramps • Galvanised extendable deck wideners, approx. 230 mm per side • Bracket for beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflective tape to EU regulations on sides, extension; red at the rear • Mounting hardware for warning signs with socket at gooseneck and rear, left and right • Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame • Lift axle on front axle with TEBS E control, responsive to axle load and load status • Adjustable mounting rails for ALU loading ramps at rear • 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel Pedema Hf Rjpfx Abrsrc • BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection • 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm • Mounting for beacon on warning signs • European reflective plates (red-yellow) at rear of trailer • 80 km/h speed stickers on rear and both sides • Load gauge to determine axle loads including load diagram • HRM Metallisation (High Resistance Metallisation) of outer frame • Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation

Durum: ikinci el, makine/araç numarası: YF1S8ZPJ1GF03xxxx, İstenildiği takdirde lütfen referans numarasını belirtin: 24840 Genel Bilgiler İmalat yılı: 2016 Marka ve model: Narko Jumbo yarı römork Aks sayısı: 3 Teknik periyodik muayene (AB muayenesi) geçerlilik süresi: 13.03.2027 Donanım ve özellikler Jumbo yarı römork İç uzunluk, yükleme platformu 1: 4,406 m İç uzunluk, yükleme platformu 2: 9,056 m Destek / yarı römork desteği (Lütfen "Krakk" adının doğruluğunu teyit edin) Bağlama noktaları Prjdpfe Adx N Tjx Abrjc Ölçüler ve ağırlık Toplam uzunluk: 13,72 m Boş ağırlık: 8.735 kg Maksimum taşıma kapasitesi: 33.265 kg Kilometre: 1 TÜV: Evet AB onayına göre geçerlilik: 13.03.2027 Kendi ağırlığı: 8735 Toplam ağırlık: 42000 Taşıma kapasitesi: 33265 Genişlik: 255 Uzunluk: 1372 Model: 3 akslı Jumbo yarı römork = Ek Bilgiler = İmalat yılı: 2016 Daha fazla bilgi için ATS Norway ile iletişime geçin.

Durum: ikinci el, makine/araç numarası: ***XMROVB00090000123, dingil konfigürasyonu: > 3 aks, ilk tescil: 01/2009, toplam uzunluk: 16.750 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2009, Chassis King Pin Diameter / Fifth Wheel: 2 inch Structure Coupling Height: 120 cm Special Transport Length Over Axles: 1185 cm Loading Floor Length: 1185 cm Gooseneck Length: 420 cm Low Loader: ✓ Maximum Width: 250 cm Maximum Length: 4315 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle Configuration Tyre Size: 245/70 R17.5 Axle Manufacturer: BPW Eco Brakes: Drum Brakes Suspension: Air Suspension Axle 1: Twin Tyres; Steering; Left Outer Tyre Tread: 30%; Right Outer Tyre Tread: 35% Axle 2: Twin Tyres; Steering; Left Outer Tyre Tread: 60%; Right Outer Tyre Tread: 60% Axle 3: Twin Tyres; Steering; Left Outer Tyre Tread: 55%; Right Outer Tyre Tread: 65% Axle 4: Twin Tyres; Steering; Left Outer Tyre Tread: 40%; Right Outer Tyre Tread: 30% Weights Psdou H Itqopfx Abrorc Gross Vehicle Weight (GVW): 65,000 kg Functional Body Manufacturer: Nooteboom Loading Platform Height: 125 cm = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, makine/araç numarası: ***XL931N5GC6L007092, ilk tescil: 01/2006, lastik boyutu: 285/70 R19.5, dingil konfigürasyonu: 3 dingil, renk: diğer, süspansiyon: hava, toplam uzunluk: 12.400 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.350 mm, Üretim yılı: 2006, Chassis Prjdpju H A R Rjfx Abrsc Diameter of coupling pin / fifth wheel: 2 inches Height of coupling pin / drawbar: 145 cm Structure Platform: ✓ Platform size: 880x250 cm Special transport Hydraulic ramps: ✓ Length over axles: 880 cm Length of loading floor: 880 cm Length of ramps: 255 cm Gooseneck length: 315 cm Low loader: ✓ Maximum width: 300 cm Maximum length: 880 cm Extendable: ✓ Adjustable ramps: ✓ Tank Fuel: ✓ = Additional information = Tyre size: 285/70 R19.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left outer: 95%; Tyre tread right outer: 95% Axle 2: Twin tyres; Tyre tread left outer: 95%; Tyre tread right outer: 95% Axle 3: Twin tyres; Steering; Tyre tread left outer: 95%; Tyre tread right outer: 95% Gross vehicle weight: 16,777,215 kg Loading platform height: 95 cm = Company information = For more information on this unit please call: or email: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, makine/araç numarası: XNJ31N5SM14L0xxxx, Talep üzerine referans numarasını lütfen belirtiniz: 24843 Genel Bilgiler Pjdps Adx Sbefx Abrsrc Üretim Yılı: 2014 Marka ve Model: Broshuis Düşük Tabanlı Yarı Römork Aks Sayısı: 3 Teknik Muayene Geçerlilik Süresi: 20.07.2027 Donanım Düşük Tabanlı Yarı Römork 2 Çekmece ADR onaylı Sabitleme Noktaları Destek Kılıfları Yönlendirilebilir Arka Aks Ölçüler ve Ağırlık Uzunluk: 13,82 m Boş Ağırlık: 13.500 kg Maksimum Yük Kapasitesi: 55.500 kg Eksiklikler 1. Çekmece sorunsuz bir şekilde açılıp kapanmaktadır. 2. Çekmece hareket etmekte zorlanıyor ve açmakta güçlük çekiliyor. Açıklama 2014 model, 3 akslı, 2 çekmeceli ve ADR onaylı bir Broshuis düşük tabanlı yarı römork satılıktır. Sahibinin belirttiğine göre, yarı römork düzgün bir şekilde çalışmaktadır. Ancak, ikinci çekmece hareket etmekte zorlanmaktadır. Hafif kozmetik hasarlar olabilir. Yarı römork hemen teslim edilebilir. Km: 1 Muayene: Evet AB onaylı, geçerlilik süresi: 20.07.2027 Kendi ağırlığı: 12400 Toplam ağırlık: 50000 Yük kapasitesi: 37600 Genişlik: 255 Uzunluk: 1333 Model: 3 akslı, 2 çekmeceli ve Ağustos 2027'ye kadar ADR onaylı yarı römork = Ek Bilgiler = Üretim Yılı: 2014 Daha fazla bilgi için lütfen ATS Norway ile iletişime geçin.

Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels Prodpfx Abshlz S Noroc • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Durum: ikinci el, makine/araç numarası: YF9TTS3LL7701xxxx, Lütfen talep üzerine referans numarasını belirtin: 24830 Genel Bilgiler Pjdpfxj Adx S Ij Abrsrc İmalat yılı: 2007 AB muayenesi geçerlilik süresi: 30.06.2027 Marka ve model: Ekeri L3 Jumbo yarı römork Aks sayısı: 3 Bilgiler ve donanım Jumbo yarı römork İç ölçüler (U x G x Y): 13.561 x 2.506 x 3.045 mm Tamamen açılabilen yan duvarlar Lastikler: Resimlere bakın Ölçüler ve ağırlık Uzunluk: 1.385 cm Boş ağırlık: 11.040 kg Maksimum taşıma kapasitesi: 33.960 kg Notlar / Bilinen kusurlar Depo bölümündeki ısıtma sistemi çalışmıyor. Km: 1 TÜV: Evet AB onayına göre: 30.06.2027 Kendi ağırlığı: 11040 Toplam ağırlık: 45000 Taşıma kapasitesi: 33960 Genişlik: 260 Uzunluk: 1385 Model: L3 3 akslı Jumbo yarı römork, tamamen açılabilen yan duvarlı = Ek bilgiler = İmalat yılı: 2007 Daha fazla bilgi için ATS Norway ile iletişime geçin.

Durum: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area: Predpfx Abji Dwlworoc - Extendable cargo area design with pneumatically actuated locking - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the external frame of the cargo area for securing belts Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower) - Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually - Axle tools included - Tyres: 435/50 R 19.5 Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Paintwork: - First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K) - High-quality single-tone two-component topcoat (2K) in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings on the galvanized front connection panel - 2 wheel chocks with brackets - 2" king pin - Galvanized steel front wall approx. 1,600 mm high - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Cargo floor made of approx. 38 mm thick hardwood - 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area - 1 spare wheel holder under the cargo area on the right in driving direction - Manual and documentation on USB stick - 1 mud flap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket - 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm) - 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container - 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes - 60 km/h speed sticker at the rear - 2 reversing lights mounted on the rear panel - Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light - Mounting bracket for beacon on the warning signs - HRM metalization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying

Durum: yeni, boş ağırlık: 8.500 kg, azami yük ağırlığı: 40.500 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Predpfxswu Agij Abrjc Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durum: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Prsdpfxsywv Ixs Abrec Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps.

Durum: ikinci el, makine/araç numarası: 51326122xxxx, İstenildiğinde lütfen referans numarasını belirtin: 24028 Özellikler: Prjdpfeztux Eex Abrjc 1987 model Dingil mesafesi: 180 cm İzin verilen toplam ağırlık: 42.000 kg Boş ağırlık: 9.770 kg Maksimum ön aks yükü: 22.000 kg Maksimum arka aks yükü: 20.000 kg Kingpin ağırlığı: 22 ton Uzatılabilir aks Sonradan takılan ABS Zayıf frenler Ön konum lambasının rengi yanlış Bazı arka far camlarını değiştirdim. Römorklarda farklı lastik tipleri Teslimata hazır Açıklama: 1987 yapımı, uzatılabilir akslı ve sonradan takılan ABS'li Forss P23 damperi olan yarı römork. Römork birkaç yıldır kullanılmadığı için iyi durumda olduğu varsayılabilir. Sahibi frenlerin zayıf olduğunu biliyor. Işık yukarıdan geliyor. Teslimata hazır. TÜV: Yok AB onaylı, geçerlilik tarihi: 30.11.2013 Boş ağırlık: 9770 Toplam ağırlık: 42000 Model: 1987 Forss P23 damperi olan yarı römork, uzatılabilir akslı ve sonradan takılan ABS'li = Ek Bilgiler = Yapım yılı: 1987 Daha fazla bilgi için ATS Norveç ile iletişime geçin.

Durum: mükemmel (kullanılmış), ilk tescil: 05/2016, Donanım: ABS, = Ek Seçenekler ve Aksesuarlar = - Hava süspansiyonu = Ek Bilgiler = Prjdpfxez Ib Ere Abrjc Üretim yılı: 2016 Boş ağırlık: 12.330 kg Yük kapasitesi: 28.670 kg Toplam ağırlık: 43.000 kg Yükleme alanının yüksekliği: 45 cm Teknik durumu: çok iyi Görsel durumu: çok iyi Hasar: yok

Durum: ikinci el, makine/araç numarası: W09STLB3NCEN1xxxx, Talep üzerine referans numarasını belirtiniz: 22956 Teknik özellikler: İmalat yılı: 2012 3. aks üzerinde dönebilme özelliği 1. aks üzerinde kaldırma özelliği İyi durumda lastikler (resimlere bakınız) Alt kat uzunluğu: 9,50 m Üst kat uzunluğu: 4 m Frenler iyi durumda Yeni boyalı Boş ağırlık: 8910 kg İzin verilen toplam ağırlık: 50.000 kg Hemen teslim edilebilir Açıklama: HRD Jumbo çekici dorse, 3 aks, imal yılı 2012. Sahibine göre frenler iyi durumda. Hemen teslim edilebilir. TÜV: Evet AB onayı geçerlilik tarihi: 06.05.2027 Kendi ağırlığı: 8910 Toplam ağırlık: 50000 Model: Jumbo yarı römork, 3 akslı = Ek bilgiler = Pjdpfx Abjzqqrpsrerc İmalat yılı: 2012 Daha fazla bilgi için ATS Norway ile iletişime geçiniz.