Alçak şasi dorse

GOLDHOFER SPZ-DH8-83/80, 8-Achser, 14to. Achsen, Gelenkt

Durumu: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control Itsdpfjk Af Svsx Agger - 4 warning panels, approx. 423 x 423 mm

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WGOTHPE4560028329, toplam ağırlık: 102.000 kg, süspansiyon: hidrolik, renk: sarı, Üretim yılı: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical data according to original TÜV inspection report: - Maximum speed: 80 km/h - Fifth wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Total trailer weight: 102,000 kg (with 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Max. fifth wheel load: 30,000 kg - King pin: 3.5" - Configuration for direct mounting of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED DECK - Payload: 67.75 t - Extendable from 6,000 to 14,000 mm Ijdpfx Agjwzl Nmjgstr - Central tube fixed to rear 4-axle bogie - Claw coupling at the front - Central tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded deck height: 650 mm (ground clearance 210 mm) - Adjustable width from 2,750 to 3,250 mm - Sliding tables (weight 405 kg) - Folding widening panels (weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height approx. 1,140 mm (+400/-200 mm) - Central lubrication Beka-Max Good condition - German vehicle from first owner - Immediately available from stock in Kirchheim unter Teck - Further details on request.

Durumu: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) Itsdpfsrgzv Nox Aggor * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Durumu: kullanılmış, kilometre: 84.860 km, güç: 375 kW (509,86 bg), ilk tescil: 02/2024, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 02/2026, frenler: retarder, renk: yeşil, vites türü: mekanik, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), her tahrikli, is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, 4x4 Hydrodrive Tractor Unit MAN TGX 18.510 BL SA in Full Specification First registration: 02/2024 Mileage: 84,860 km GM cab with 1 bunk, cab air suspension, swinging steps, three-piece steel bumper, Light & Vision Plus safety package, driver comfort package, Plus interior lighting package, storage package, comfort driver's seat with Alcantara/leather upholstery, driver's seat heated and ventilated, rotatable Vario passenger seat, full LED lighting, LED headlights, LED fog lights, high-beam assistant, automatic headlight control, 12.3-inch instrument cluster, MAN Truck navigation, Climatronic air conditioning, water-based auxiliary heater, refrigerator under the bunk, 220-volt outlet. ZF 16-speed manual transmission RETARDER and additionally reinforced engine brake EVBec Leaf/air suspension Itsdowwv Urjpfx Aggjr Wheelbase: 3,600 mm, short and highly maneuverable Aluminum fuel tank 490 liters 2-line MEILLER tipping hydraulics, large aluminum hydraulic oil tank approx. 200 L, switchable high-/low-pressure system. Tyres: Front axle: 385/65 R 22.5 Rear axle: 315/80 R 22.5 ALCOA Dura-Bright high-gloss aluminum wheels Full safety package with active steering MAN Comfort-Steering, Lane Change Support (LCS) and Turn Assist, side camera system SCS and all-round visibility assistance, ACC adaptive cruise control, EBS, ABS off-road with additional terrain logic, full emergency brake assistant, emergency braking assistant EBA, lane departure warning LDW. RENTING is the new BUYING, available immediately with us on full-service rental.

Durumu: yeni, boş ağırlık: 6.350 kg, azami yük ağırlığı: 38.650 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Platform: - 2 pairs of external foldable lashing rings (LC 5,000 daN) - 24 pairs of cutouts in the platform’s outer frame for attaching tensioning straps (LC 2,000 daN) Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), with raise/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system according to EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not possible Steel Construction: - Steel construction made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting 24 Volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin - Wiring according to ISO norms: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings on the galvanized front terminal strip - 4 wheel chocks with holder - 2" king pin - A galvanized steel front wall approx. 1,600 mm high. EN12642-XL - White reflective tape according to EU regulations on the sides and red on the trailer’s rear - European reflective plates (red-yellow) at the rear of the trailer - Platform with approx. 30 mm thick hardwood floor, fitted in omega profiles - 10 pairs of stake pockets for 100 x 50 mm slot-in stakes in the platform’s outer frame Iodpsiu Etkofx Aggjtr - 3 pairs of transverse stake pocket strips mounted on the platform for 100 x 50 mm slot-in stakes - Storage tray for 1,000 mm slot-in stakes at the rear in the central beam - 1 spare wheel carrier under the platform on the right side (direction of travel) - One mudflap at the rear of the trailer - Manual and documentation on USB stick - One bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear apron, brackets on both sides for warning signs including socket - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, flush with the rear - 80 km/h speed limit stickers at the rear and on both sides - Four warning signs extendable by approx. 400 mm, each approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible surfaces metalized and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Durumu: kullanılmış, azami yük ağırlığı: 120.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/1993, Üretim yılı: 1993, Donanım: ABS, Üretici: GOLDHOFER Ijdpfxet Irxxs Aggetr Tip: THP-SL Yapım yılı: 1993 / 2010 aşağıdakilerden oluşur: - Hidrolik üniteli deveboynu (yıl: 1993 - hidrolik: 2003) - 2 akslı şasi modülü (yıl: 2010) - 3 akslı şasi modülü (yıl: 1993) - 4 akslı alt şasi modülü (yıl: 1993) - Ekskavatör yatağı 5,8 m rijit (yıl: 2010 - taşıma kapasitesi 100 ton) - Ekskavatör yatağı 8m + 5m uzatılabilir (yapım yılı: 1993 - taşıma kapasitesi 120 ton) Hemen temin edilebilir. Hatalara ve önceki satışa tabidir.

Durumu: kullanılmış, toplam ağırlık: 92.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2006, yükleme alanı uzunluğu: 19.000 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 815 mm, toplam genişlik: 3.000 mm, Donanım: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport --- Registration / Technical specifications: Speed: 80 km/h / 65 km/h Fifth wheel load: 23,000 kg / 26,000 kg Rear axle load: 10,000 kg / 11,000 kg Gross vehicle weight: 83,000 kg / 92,000 kg Payload: 52,500 kg / 61,500 kg Unladen weight (without accessories): 30,500 kg --- Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm King pin: 3.5 inch Chamfer: 10° angled Front corners: 45° angled Floor covering: Spruce 50 mm Landing legs: mechanical Width with side walls: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically liftable and lowerable Mechanical drop tube supports and hydraulic support cylinders Hydromechanical forced steering (2-circuit system) in flat design (height 235 mm) with adjustable guide elements and THP steering cylinders. --- Loading platform: Type: platform Liftable: no Length: 13,000 mm Width: 3,000 mm Floor covering: steel plate/spruce 50 mm Wheel recesses: no Widenings: no Extendable: Single telescope Length 1: 10,000 mm Loading height (loaded): 815 mm Telescopic loading platform constructed as an inner and outer tube construction, with a fixed 1,070 mm long front deck section. Integrated bolt-lug coupling in the fixed deck section for coupling extension beams for bolster bridges. The welded flat bar rails serve as running rails for gauges of 1,000 mm (track gauge 1,015 mm) and 1,435 mm (track gauge 1,450 mm). Locking of telescopic stages via spring-loaded cylinders and cone bushings Deck height above center tube (outer tube): approx. 815 mm (+/- 130 mm) Deck height on inset rail sections: approx. 790 mm (+/- 130 mm) --- Rear running gear: Design: standard Loaded height: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Floor covering: steel plate Widenings: no Wheel recesses: no Excavator trough: no --- Axles: Number of axles: 6 Lifting axle: see accessories Axle type: Drop arm steering axle Axle compensation: hydraulic Axle make: BPW/Eco Ride positions: 1 Axle lift (1) +/-: 130/130 mm Axle lift (2) +/-: 0/0 mm Lift/drop valve: Yes 1st axle can be raised pneumatically with lift bellows --- Steering: Number of steered axles: 6 Arrangement of steered axles: all steered Max steering angle: 45° Type of steering: hydraulic, 2-circuit --- Tyres: Size: 235/75 R 17.5 143/141 J Type: twin tires Rim type: disc Rims: hub-centric --- Brake system code: According to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS delete: No Parking brake: spring-loaded EBS: No ECAS: No Note: Brake calculation No.: GH 4324S --- Suspension remarks: Itjdpfx Aelhn Afegger Steering designed for extended configuration with increased steering angle on the front axles Open wheel arches above the wheels with narrow cross members in between (ALU covers see accessories below) Control elements protected, mounted on the left-hand side in direction of travel Rims: 17.5 x 6.75 Cranked axles! --- Vehicle rear: Design: standard 90° Ramp attachment: see accessories Floor covering: steel plate Rear overhang from last axle: 1,300 mm Support: see accessories --- Load securing: Lashing rings Quantity: 5 Rated load: up to 10 tons each Arrangement: 2 pairs on gooseneck, 3 pairs on loading platform --- Rear extension: Max load capacity 15,000 kg with a wagon bogie, assembled from profiles, without ...

Durumu: kullanılmış, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2006, toplam genişlik: 2.850 mm, süspansiyon: diğer, lastik boyutu: 285/70R19.5, renk: siyah, Üretim yılı: 2006, Donanım: ABS, = Additional Options and Accessories = - Central lubrication = Notes = Isdpfjxbng Eex Aggotr Faymonville Jeep Dolly D3 Year: 10-2006 1 x lift axle 1 x friction-steered axle / trailing steering Air suspension Max. technical weight: 56,000 kg Faymonville STBZ-5VA Year: 10-2006 Pendle axle Detachable gooseneck Sliding deck Extendable bed: 400 cm Loading platform: 650 + 400 cm 50,000 kg neck load Max. technical weight: 119,680 kg = Further Information = Axle configuration Tyre size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tyres; Tyre tread depth left inside: 15%; left outside: 60%; right inside: 60%; right outside: 60%; Suspension: Air suspension Front axle 2: Twin tyres; Tyre tread depth left inside: 30%; left outside: 30%; right inside: 40%; right outside: 60%; Suspension: Air suspension Front axle 3: Twin tyres; Steered; Tyre tread depth left inside: 30%; left outside: 70%; right inside: 60%; right outside: 70%; Suspension: Air suspension Rear axle 1: Twin tyres; Steered; Tyre tread depth left inside: 30%; left outside: 60%; right inside: 40%; right outside: 70%; Suspension: Hydraulic suspension Rear axle 2: Twin tyres; Steered; Tyre tread depth left inside: 50%; left outside: 50%; right inside: 30%; right outside: 75%; Suspension: Hydraulic suspension Rear axle 3: Twin tyres; Steered; Tyre tread depth left inside: 60%; left outside: 60%; right inside: 60%; right outside: 60%; Suspension: Hydraulic suspension Rear axle 4: Twin tyres; Steered; Tyre tread depth left inside: 60%; left outside: 60%; right inside: 40%; right outside: 50%; Suspension: Hydraulic suspension Rear axle 5: Twin tyres; Steered; Tyre tread depth left inside: 70%; left outside: 70%; right inside: 20%; right outside: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Model number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). Govorim po ryccki. We make every effort to provide correct information, but no rights can be derived from these texts.

Durumu: kullanılmış, azami yük ağırlığı: 84.800 kg, toplam ağırlık: 110.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2013, STZ-P7-82/80 A with Pendulum Axles Dimension B: 16,450 mm – 25,480 mm Speed rating: 80 km/h Fifth wheel load: 26,000 kg Axle load: 7 x 12,000 kg Gross permissible weight: 110,000 kg Unladen weight: approx. 25,200 kg Payload: approx. 84,800 kg Gooseneck (Length x Width): 3,695 mm x 2,480 mm Coupling height (loaded): 1,300 mm Steering angle radius front/rear: 1,280 mm / 2,800 mm King pin: 3.5” Fifth wheel load: 26,000 kg Loading platform (L x W): 13,190 x 2,750 mm Telescopic extension: 9,400 mm Stepped extension (L x W): 22,590 mm x 2,750 mm Iodpfx Aexc Dbboggstr Including rear taper: 615 mm 7-axle rear chassis, single tires 245/70 R 17.5 with BPW pendulum axles, 12-14 t axle load Steering: Forced steering system Radio remote control Central lubrication system Hydraulic rear support Technical Data Gooseneck Loading platform (L x W): 3,695 x 2,480 mm Coupling height (loaded): 1,300 mm Steering angle radius rear: 2,800 mm Steering angle radius front: 1,280 mm King pin: 3.5" Loading platform Loading platform (L x W): 13,190 x 2,750 mm Telescopic extension: 9,400 mm Stepped extension (L x W): 22,590 mm x 2,750 mm Including rear taper: 615 mm Loading height (loaded): approx. 955 mm Steering 1st axle rigid 3rd – 7th axle hydro-mechanically forced steered (dual-circuit steering system)

Durumu: yeni, azami yük ağırlığı: 73.090 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Below is an excerpt from the equipment list. Complete equipment specifications available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 2-Axle Compact Front Chassis: * Hook attachments front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Low-bed: * ATX-A low-bed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and coupling with bolt & lugs at the rear * Basic width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm with ground clearance approx. 150 mm 4-Axle Rear Chassis: * Mechanical bolt & lug coupling for attaching a low-bed at the front * Rear end crossmember * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Chassis: * Pendulum axles, all axles hydro-mechanically forced steering * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and front plug for securing in raised position * Final coating of axles: 2 layers of single-color 2-component paint in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Chassis: * Pendulum axles, all axles hydro-mechanically forced steering * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and front plug for securing in raised position * Final coating of axles: 2 layers of single-color 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres as per manufacturer's choice (M+S) 285/70 R19.5 * Load index 150/148J Isdpfxjxbv Aue Aggjtr Paintwork: * Complete steel structure automatically shot-blasted with a centrifugal wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the complete chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final painting with two coats of 2K top coat, one color in RAL 3002 Carmine Red according to RAL system 841GL Including the following accessories: * Steel headboard, approx. 400 mm high * Plug-in aluminium side and rear panels for the gooseneck, approx. 400 mm high * 3.5 inch kingpin * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspending supply lines * The tractor unit tank must hold at least 80 liters * With MAX Trailer coupling fittings, otherwise coupling fittings to be supplied ex works by customer * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connections on the gooseneck * Front chassis with separate air connection for air tools * BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2 * Preparation for mounting bolt-on container positions for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts on the outer runners of the loading platform for fitting fold-out extensions * BEKA-MAX central lubrication for a 4-axle chassis with standard grease NLGI-2 * Socket on rear chassis for cable remote control of rear steering * Rear chassis with trough * One LED beacon wi