Kullanılmış Faymonville Max Trailer 4-A-Mega-Tele-Semi-Nachlaufg satın al (66.530)

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2019, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, dingil mesafesi: 10.160 mm, renk: kırmızı, Üretim yılı: 2019, Donanım: ABS, 1 adet kaldırma aksı 3 adet direksiyonlu aks. Radyo ile uzaktan direksiyon kontrolü. Hidrolik rampa. Kamera. = Ek Bilgiler = Ppsdezp Dryspfx Ag Dow Aks Konfigürasyonu Lastik Ölçüsü: 245/70R17.5 Frenler: Kampana frenler Süspansiyon: Hava süspansiyonu Arka Aks 1: Çift lastikli; Lastik diş derinliği sol iç: %50; Lastik diş derinliği sol dış: %50; Lastik diş derinliği sağ iç: %50; Lastik diş derinliği sağ dış: %50 Arka Aks 2: Çift lastikli; Direksiyonlu; Lastik diş derinliği sol iç: %30; Lastik diş derinliği sol dış: %30; Lastik diş derinliği sağ iç: %30; Lastik diş derinliği sağ dış: %30 Arka Aks 3: Çift lastikli; Direksiyonlu; Lastik diş derinliği sol iç: %40; Lastik diş derinliği sol dış: %40; Lastik diş derinliği sağ iç: %40; Lastik diş derinliği sağ dış: %40 Arka Aks 4: Çift lastikli; Direksiyonlu; Lastik diş derinliği sol iç: %60; Lastik diş derinliği sol dış: %60; Lastik diş derinliği sağ iç: %60; Lastik diş derinliği sağ dış: %60 Ağırlıklar Boş ağırlık: 11.344 kg Yük kapasitesi: 54.656 kg Toplam ağırlık: 66.000 kg Bakım APK (Periyodik Teknik Kontrol): 02.2027'ye kadar geçerli Finansal Bilgiler Fiyat: Talep üzerine Tanımlama Model Numarası: max trailer N/A F-S44 / STEERING = Şirket Bilgileri = TÜM FİYATLAR İHRACAT İÇİN NETTİR, (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Rusça konuşuyoruz) Mümkün olduğunca doğru bilgi vermeye çalışıyoruz. Ancak, yayınlanan metinlerden herhangi bir hak talebinde bulunulamaz.

Durum: yeni, azami yük ağırlığı: 48.930 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, Geniş ürün yelpazemizdeki araçlarımıza, anında ve kısa sürede teslim edilebilen araçlarımız için web sitemizden ulaşabilirsiniz. Ekipman listesinden bir bölüm. Tam ekipman listesi talep üzerine sağlanacaktır. Kaz Boynu * Ön kısımda yaklaşık 45° açılı köşelerle ve arka kısımda yaklaşık 750 mm x 10° açılı eğimle * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Yük Platformu * Arka kısımda yaklaşık 500 mm x 8° açılı eğimle çift açılır tasarımda * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 4 çift bağlama halkası (LC 10.000 daN) * Yük platformunun ön kısmında yatay konumda 1 çift bağlama halkası (LC 10.000 daN) * Yaklaşık 250 mm genişliğinde 1 adet ara masa * Yük platformunun dış çerçevesinde, gerdirme bantlarının asılması için oyuklar (LC 2.000 daN) * Yaklaşık 48 mm kalınlığında sert ahşap kaplama, akslar üzerinde tırtıllı sac kaplama Akslar * BPW akslar, hidro-mekanik zorlamalı yönlendirme * Teknik aks yükü: 12.000 kg (her biri) * Kaldırma ve indirme valfi ile hava süspansiyonu Lastikler * 245/70 R 17.5 3PMSF, yük indeksi (146/146 F) * TPMS lastik basıncı izleme sistemi, ECE R 141'e uygun Dorse Ayakları * JOST dorse ayakları (mekanik), yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımanlı Fren Sistemi * AB yönetmeliklerine uygun olarak EBS-E (4S3M) Çelik Konstrüksiyon * Yüksek mukavemetli ince taneli çeliklerden * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa) * S690QL/S700MC (akma dayanımı 690 MPa) Elektrik Sistemi * AB yönetmeliklerine uygun, aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) * Tüm LED yan işaretleme lambaları, sinyal ile birlikte yanıp söner * ASPÖCK-UNIBOX, ön bağlantı çubuğunda, 24N, 24S ve 15 kutuplu bağlantı prizleri ile ISO'ya uygun Boya * Kaynak işleminden sonra tüm çelik konstrüksiyon, otomatik olarak bir döner püskürtme sistemi ile temizlenir * Kaplama sisteminin optimum yapışması için korundum ile ikinci temizleme işlemi * Tüm araç şasisinin HRM metalizasyonu, en iyi korozyon korumasını sağlamak için ZINACOR 850 (%85 çinko/%15 alüminyum) ile * RAL 3002 Kırmızı renginde, RAL 841GL sistemine uygun, 2 kat 2K üst kat boya ile son kat boya * Jantlar gümüş rengindedir. Arka kısım metalize edilmiştir ve RAL 9010 (saf beyaz) rengine boyanmıştır * Metalik boya mümkün değildir * ISO 9227-NSS'ye göre tuzlu su püskürtme testi ile test edilmiş boya yapısı * Boşlukların özel balmumu ile kapatılması Pedozlwm Aepfx Ag Dspw Aşağıdaki ek ekipmanlar dahildir: 2 inç Kral Pimi * Elektro-hidrolik ünitesi (± 45 kg) * Ön ve arka kısımda, butonlar aracılığıyla kontrol edilebilen kablolu uzaktan kumanda ile direksiyon (aks kontrolü ile) (SZM'de kurulum olmadan) * Kaz boynunda ve arka sac üzerinde, sol ve sağ tarafta, uyarı levhaları için birer adet tutucu, priz dahil * Dorse arka kısmında döner lamba için bir tutucu * Kaz boynunda, takılabilir alüminyum yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm (U x Y) * Arka galvanizli bağlantı elemanları çıkarılabilir. (Kasa uzunluğu yaklaşık 2.560 mm) (± 46 kg) * Eğik kaz boynuna entegre edilmiş, galvanizli bir alet kutusu (± 47 kg) * Yük platformunda 4 çift WADER konteyner cebi, 20', 2x 20', 40 veya 45'lik bir konteyner için (± 40 kg) * Yük platformunun dış çerçevesinde, takılabilir bağlantı elemanları için 7 çift bağlama cebi, yaklaşık 100 x 50 mm (± 21 kg) * Her biri yaklaşık 230 mm genişliğinde, dışa doğru uzatılabilen galvanizli genişletmeler (± 262 kg) * Alüminyum rampalar için

Durum: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Donanım Özeti Kaz boynu * Ön kısımda yaklaşık 45°'lik açılı köşeler ve arka kısımda yaklaşık 750 mm x 10°'lik eğim ile * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Yükleme platformu * Arka kısımda yaklaşık 500 mm x 8°'lik eğim ile çift olarak açılabilen tasarım * Dışa doğru katlanabilen 6 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 4 çift bağlama halkası (LC 10.000 daN) * Yükleme platformunun ön tarafında yatay konumda bulunan 1 çift bağlama halkası (LC 10.000 daN) * Yaklaşık 250 mm'lik bir ara masa * Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıllı sac kaplama * Gerdirme bantlarının takılması için yükleme platformunun dış çerçevesindeki boşluklar (LC 2.000 daN) Akslar * BPW akslar ve süspansiyon, tüm akslar hidro-mekanik olarak zorlanmış direksiyonlu * Teknik aks yükü: her biri 12.000 kg * Kaldırma ve indirme vanası ile hava süspansiyonu * Aks aleti Lastikler * 245/70 R 17.5, yük endeksi (146/146 F) * Firmamızın seçimine göre Dorse ayakları * Yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımanlı JOST dorse ayakları (mekanik) Fren sistemi * AB yönetmeliklerine uygun olarak EBS-E (2S2M) sistemi, çekiciye bağlantı hatları olmadan Boya * Standart olarak bilye ile püskürtülmüş kaynaklı şasinin mükemmel ve uzun ömürlü korozyon koruması, 2 bileşenli (2K) çinko tozu astar ile garanti edilir. * Yüksek kaliteli 2 bileşenli (2K) * Tek renk RAL 3002 karmin kırmızısı renginde üst kat boya * Arka kısım metalik olarak boyanmış ve RAL 9010 (saf beyaz) rengindedir. * Metalik boya uygulaması yapılamaz. Çelik yapı * Yüksek mukavemetli ince taneli çeliklerden üretilmiştir. * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355MPa) S690QL/S700MC (akma dayanımı 690MPa) Elektrik sistemi * AB yönetmeliklerine uygun olarak * Aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) * Ön taraftaki bağlantı şeridi üzerinde ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu prizler ile * ISO'ya uygun bağlantı. 24N ISO-1185 24S ISO-3731 15 kutuplu ISO-12098 Aşağıdaki ek donanımlar dahildir: * 2 inçlik König bağlantı pimi * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Galvanizli ön bağlantı şeridi üzerinde sarı-kırmızı hava bağlantı elemanları * Ön duvar üzerinde 4 adet fren takozu ve tutucu (± 5kg) * Ön duvarın önünde bir adet yedek lastik tutucusu * Elektrik-hidrolik ünitesi (± 45kg) Ppedpozlwm Nsfx Ag Djw * Ön ve arka taraftan, kablo uzaktan kumandası ve basma düğmeleri aracılığıyla kontrol edilebilen direksiyon takviyesi, aksların tek şerit kontrolü ile (çekicide montajı olmadan) * Kaz boynunun arka kısmında alüminyum rampalar için yuva * Dorse arka kısmında Avrupa standartlarına uygun reflektörlü plakalar (kırmızı-sarı) * AB yönetmeliklerine uygun olarak, yanlarda, açılır platformda ve dorse arka tarafında sarı reflektör şeridi * Kaz boynunda ve arka sac üzerinde, sol ve sağ taraflarda, her birinde uyarı levhaları için birer tutucu ve priz bulunur * Aracın arka kısmında alüminyum rampalar için asma çubuğu * Dorse arka kısmında çok yönlü bir lamba için tutucu * Yükleme platformunun eğiminin altında galvanizli katlanabilir destekler * Dorse arka kısmında bir çamurluk * Kullanım kılavuzu ve açıklamalar USB belleğinde * Arka ve yanlarda 80 km/saat hız etiketi * Aks yüklerinin belirlenmesi için yük manometresi ve yük diyagramı.

Durum: yeni, azami yük ağırlığı: 46.800 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, Web sitemizde hemen ve kısa sürede kullanıma hazır olan tüm araçlarımızı bulabilirsiniz. Donanım Özeti: Tam donanım talep üzerine sunulmaktadır. Kaz Boynu * Ön tarafta yaklaşık 45° açılı köşelerle ve arka tarafta yaklaşık 750 mm x 10° açıyla eğimli kaz boynu * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Çekilebilir Tasarımlı Yük Platformu * Arka tarafta yaklaşık 1.000 mm x 8° eğim * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) * Yük platformunun ön tarafında yatay konumda 1 çift bağlama halkası (LC 10.000 daN) * Gergi bantlarının takılması için yük platformunun dış çerçevesinde oyuklar (LC 2.000 daN) * Aksların üzerinde çıkıntılı yüzeyli çelik levha kaplama ile yaklaşık 48 mm kalınlığında sert ahşap kaplama Akslar * BPW akslar ve süspansiyon * 1. aks sabit, diğer tüm akslar hidro-mekanik olarak zorunlu olarak yönlendirilir * Teknik aks yükü: her biri 12.000 kg * Kaldırma ve indirme valfli hava süspansiyonu * Aks aleti * Lastikler * 245/70 R 17.5 3PMSF * Yük indeksi (146/146 F) * TPMS: ECE R 141'e uygun TPMS lastik basıncı izleme sistemi Dorse Destekleri * Yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımana sahip JOST dorse destekleri (mekanik) Podpfezk S Dmex Ag Depw Fren Sistemi * AB yönetmeliklerine uygun olarak EBS-E (4S3M) ile donatılmıştır Boya * Kaynak işleminden sonra tüm çelik yapı, otomatik olarak döndürme disk sistemi ile püskürtülerek temizlenir * Kaplama sisteminin optimum yapışması için korund ile ikinci temizleme işlemi * En iyi korozyon korumasını sağlamak için tüm araç şasisinin HRM metalizasyonu ile ZINACOR 850 (%85 çinko / %15 alüminyum) kaplama * 2 kat 2K üst kat boya ile son kat boyama * RAL 3002 Kırmızı renkte, RAL 841GL sistemine uygun tek renk * Jantlar gümüş gri renkte. Arka kısım metalize edilmiştir ve RAL 9010 (saf beyaz) renginde boyanmıştır * Metalik boya mümkün değildir * Boya uygulaması, ISO 9227-NSS tuz sisi püskürtme testinde test edilmiştir * Özel bir balmumu ile boşlukların kapatılması Çelik Yapı * Yüksek mukavemetli ince taneli çeliklerden yapılmıştır * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa) S690QL/S700MC (akma dayanımı 690 MPa) Elektrik Sistemi * AB yönetmeliklerine uygundur Aydınlatma * 24 Volt ASPÖCK-NORDIK (ASS3) * Tüm LED yan işaret lambaları, sinyal lambasıyla birlikte yanıp söner * Ön bağlantı panelinde 24N, 24S ve 15 kutuplu prizli ASPÖCK-UNIBOX * ISO'ya uygun bağlantı. 24N ISO-1185 24S ISO-3731 15 kutuplu ISO-12098 Aşağıdaki ek ekipmanlar dahildir * 2 inç Kral pim * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Elektrikli-hidrolik ünite (± 45 kg) * Ön ve arka taraftan, kablo uzaktan kumandası aracılığıyla düğmelerle kontrol edilebilen takip direksiyonu, aksların tek şerit kontrolü ile (SZM'de kurulum olmadan) * Arka kısımda, eğimli kısımda, merkeze monte edilen taşıyıcı üzerinde yatay konumda 1 çift gömme bağlama halkası (LC 10.000 daN) (± 3 kg) * Kaz boynunda, takılabilir alüminyum yan ve arka duvarlar, yaklaşık 2.440 x 400 mm (U x Y) * Arka galvanizli takılabilir kirişler çıkarılabilir. (Yapının uzunluğu yaklaşık 2.560 mm) (± 46 kg) * Eğimli kaz boynunda entegre, galvanizli bir alet kutusu (± 47 kg) * Yük platformunda, 20' (30?) veya 40? konteyner için 3 çift WADER konteyner cebi (± 30 kg) * Yük platformunun dış çerçevesinde yaklaşık 100 x 50 mm boyutlarında 6 çift kiriş cebi (± 18 kg) * Her iki tarafta yaklaşık 23

Durum: ikinci el, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, Donanım: ABS, Ekipman listesinden bir bölüm. Tam ekipman listesi talep üzerine sağlanır. * Kaz boynu, ön kısımda yaklaşık 45° eğimli köşelerle ve arka kısımda yaklaşık 750 mm x 10° eğimle. * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama * Yükleme alanı, arka kısımda yaklaşık 1.000 mm x 8° eğimle, uzatılabilir şekilde. * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) * 1 çift bağlama halkası, yükleme alanının ön kısmında yatay olarak (LC 10.000 daN) * Gergi bantlarının takılması için yükleme alanının dış çerçevesinde oyuklar (LC 2.000 daN) * Yaklaşık 48 mm kalınlığında sert ahşap kaplama * Akslar üzerinde tırtıklı metal levha kaplama * Şasi destek ayakları: JOST şasi destek ayakları (mekanik), 2 vitesli şanzımanlı, 24 ton kaldırma kapasiteli (50 ton test yükü) * Lastikler: 235/75 R 17.5 3PMSF * Akslar: BPW akslar, iki sabit aks, iki takipçili aks, hava süspansiyonlu, tamburlu frenli ve kaldırma/alçaltma fonksiyonlu. * Elektro-manyetik geri vites kilidi ile donatılmış takipçili akslar, geri vites veya manuel olarak etkinleştirilebilir. * Fren sistemi: AB yönetmeliklerine uygun WABCO fren sistemi, EBS-E (4S3M), çekiciye bağlantı hatları olmadan. * Boya: Yüksek kaliteli, iki bileşenli (2K) tek renkli üst kat boya, RAL 3002 karmin kırmızısı. * Aksesuarlar: * Ön duvarın önünde bir yedek lastik tutucu (yedek lastik hariç) * 2 inçlik König pim * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar Ppsdpfx Aezkx Hujg Djw * Ön taraftaki galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları * Ön duvarda bulunan tutuculu 4 adet tekerlek takozu * Kaz boynunun arka kısmında alüminyum rampalar için yuva * Yükleme alanının eğiminin altında galvanizli katlanabilir destek ayakları * Römorkun arkasında, etrafı aydınlatma için bir lamba tutucu * AB yönetmeliklerine uygun, yanlarda, uzatılabilir kısımda ve römorkun arkasında sarı reflektör şeridi * Kaz boynunda ve arka sacda, sol ve sağ tarafta, uyarı levhaları için tutucular (priz dahil) * Aks yüklerinin belirlenmesi için yükölçer (yük diyagramı dahil) * Ek olarak: * Kaz boynunda, takılabilir alüminyum yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm (U x Y). * Eğimli kaz boynuna entegre, galvanizli bir alet kutusu. * Yükleme alanında, 20' (30') veya 40' bir konteyner için 3 çift WADER konteyner cepleri. * Römorkun arkasında, alüminyum rampalar için kaydırılabilir takma çıtaları. * Yükleme alanının dış çerçevesinde, yaklaşık 100 x 50 mm boyutlarında 6 çift takma çıtası için cepler. * Galvanizli, her iki tarafta yaklaşık 230 mm uzatılabilen genişletmeler. * Ön aksa takılan, TEBS E ile kontrol edilen kaldırma aksı. * Arka sacda monte edilmiş 2 adet LED geri vites lambası. * Kaz boynunun altında 2 çift, arkada 2 çift Ferry halkası. * Geri vites yaparken akustik uyarı sinyali. * HRM metalizasyon (Yüksek Dirençli Metalizasyon).

Durum: yeni, azami yük ağırlığı: 98.290 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * MAX810-Neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulic gooseneck, lift/lower and detachable. Length approx. 3,650 mm * Truck hydraulic connection with flow regulator (20 l/min), * incl. hanging bracket for the supply lines; tractor unit tank must hold at least 80 l, equipped with MAX Trailer couplings; otherwise, couplings to be supplied free issue by the customer. * For tractor unit: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-eye coupling at the front and rear chamfer of approx. 500 mm x 8°. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling pin. PENDLE AXLE 2-AXLE FRONT CHASSIS PENDLE-AXLE * All axles hydro-mechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-eye coupling front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX centralized lubrication for 2-axle chassis with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDLE AXLE 6-AXLE LOADING PLATFORM PENDLE-AXLE * All axles hydro-mechanically forced steered. * Hose rupture valve on axle equalizing cylinder with automatic RESET function. * Hydraulic cylinders with shut-off valves and pre-insert to secure in raised position. * Technical axle load: each 13,740 kg (30 km/h) * Hydraulic axle equalization. TYRES * 24 x brand at our discretion (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Pedpszbfuhefx Ag Dopw Final coating of axles * Painted in DB7350 Novagrau, solid color, with 2 layers of 2-component paint. * PAINTWORK Complete steel construction sandblasted automatically by shot blast machine after welding. * Second blasting with corundum for optimal adhesion of the coating system. * HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to guarantee optimal corrosion protection. * PAINTWORK Trailer in carmine red (RAL 3002) Including the following accessories * Bracket with winch for spare wheel at the front of the gooseneck. * 3.5-inch kingpin * Steel front wall approx. 400 mm high. * Plug-in aluminium drop sides and rear wall, approx. 400 mm high, anodized finish, for gooseneck. * Operating lever on the gooseneck protected by a foldable cover. * Illuminated operating controls on the gooseneck with on/off switch. * One 7-pole socket left and right rear of the gooseneck for warning board. * Load gauge on the gooseneck to determine axle load at front and rear chassis * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2. * Hydraulic connections from gooseneck to lowbed with threaded couplings. * Access possibility to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm Emission stage: EU Stage V Max. hydraulic pressure: 280 bar Max. flow: 21 l/min Assembly on the gooseneck. * Hydraulic oil tank 100 L frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between power pack and connector plate on the gooseneck. * Radio remote control: * Control of power pack, start/sto

Durum: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting Ppsdpfsrq Dlfox Ag Dsw - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Durum: ikinci el, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2024, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, Üretim yılı: 2024, Donanım: ABS, For every used semitrailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading area: - Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° - A recess in the loading platform, including into the chamfer, for accommodating the excavator bucket arm - Pneumatic locking system with conical locking pins and reinforced locking positions - Hardwood flooring on the loading platform chamfer Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps laminated with hardwood - Hydraulically foldable ramp tips - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - Square serrated crossbars 20 x 30 mm, every approx. 200 mm on the outer frame of the ramp Axles and suspension: - BPW axles and suspension, first axle self-steering, all other axles hydromechanically forced steering - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre sensors Accessories included: - Removable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations - 1 spare wheel - External beams of the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU sidewalls, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - 2" king pin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, foldable lashing rings in the outer frame of the loading area - Expandable (galvanized) extensions up to approx. 230 mm per side - Wheel recesses with square serrated strips, 15 x 15 mm, continuously open ahead of the axles up to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel recesses - ALU elements lockable on the extension tubes of the width extensions - Expandable U-profiles for ALU covers - Wheel recesses with square serrated strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU elements lockable on the extension tubes of the width extensions - 1 pair of mechanical rear supports - Rear steering operable from front and rear via cable remote control, with axle tracking control - 1st axle with automatic lift axle function and starting aid in accordance with EU Directive 2021/535 - Under the gooseneck and at the rear crossbar left and right, each with a 7-pin socket with holder for warning boards - Square serrated strips 20 x 30 mm, every approx. 200 mm on the outer frame of the loading platform chamfer - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, in addition to cable remote - Wabco Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm Ppodsypb Akopfx Ag Djw

Durum: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long - Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood flooring on the bevel of the loading platform Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually - Air suspension with lift and lower valve - Tires: 235/75 R 17.5 twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS tire sensors installed in all wheels, including spare wheels Pjdpfxsk Aht Ue Ag Depw Accessories included: - Detachable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch - Parking bracket for warning signs on gooseneck when not in use - 1 spare wheel - On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized - On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin - 2'' king pin - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with two-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Telescopic width extensions (galvanized) approx. 230 mm per side - Wheel recesses with square climbing strips - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with single track axle monitoring - 1st axle with automatic lifting axle function - Central lubrication system with 1 pump, BEKAMAX brand - Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon

Durum: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm Gooseneck rear with bevel approx. 1,000 mm x 10° Loading Area: Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10° Recess in the incline and extending into the loading area for accommodating the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected within the extendable beam and adjust to the respective loading area length Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards Axles and Suspension: BPW axles and suspension, two fixed axles, two steering trailing axles Electromagnetic reverse lock activated via reverse gear and manually Air suspension with lifting and lowering valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO brake system, EBS-E according to EU regulations Lighting System: 24-volt lighting system, “ASPÖCK-NORDIK full LED” Metallization: Standard HRM metallization of the external frame Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished Steel Structure: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified according to DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Included accessories: Removable steel front wall, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 Round NATO socket on the front connection strip Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches) 1 spare wheel with mounting adapter External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring 1 pair screw-in lashing rings Approx. 40 mm thick hardwood floor above gooseneck Pjdpfx Ask Ahugeg Dopw On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized 2" king pin Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 4 wheel chocks with holders Provision for aluminium approach ramps Mechanical landing gears with 2-speed gearbox and crank On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate Slotted holes at the front of the loading area for attachable and repositionable bridging plates 1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering Front and rear with longe...

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 38.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: gri-siyah, Donanım: ABS, Loading Platform: • Loading platform in extendable design with pneumatically operated locking mechanism • Loading platform with approx. 30 mm thick wooden floor • 7 pairs of outward-folding lashing rings (LC 5,000 daN) • 3 pairs of outward-folding lashing rings (LC 10,000 daN) • Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydro-mechanically forced steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with raise/lower valve • Axle tools • Tyres: 385/65 R 22.5 • TPMS (Tyre Pressure Monitoring System) according to ECE R 141 Brake System: • WABCO brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin Pedoiu Etropfx Ag Depw • Connections according to ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Accessories Included: • Remote-controlled steering from front and rear via cable remote with push-button operation, including single-track monitoring of axles • 4 wheel chocks with holders mounted on the front wall • 2" kingpin • One galvanized steel front wall approx. 1,600 mm high • Yellow-red air couplings mounted on the galvanized front connection bar • White reflective tape according to EU regulations on the sides, at extension and at the rear of the trailer in red • European reflective plates (red-yellow) on the rear of the trailer • One mudflap at the rear of the trailer • Manual and description • Mounting bracket for a beacon at the rear of the trailer • Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles • 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform • 1 spare wheel holder under the right side of the loading platform in the direction of travel • Electro-hydraulic unit • On the gooseneck and rear apron left and right, each with a bracket for warning boards including socket • Painted sand layer for anti-slip protection on the main beam • 6 pairs of WADER container locks on the loading platform, for 1x20ft, 2x 20ft, or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container • 4 pairs of crosswise mounted stake pocket bars on the loading platform for plug-in stanchions 100 x 50 mm • Access ladder mounted on the right in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm in front under the loading platform on the left in the direction of travel • BEKAMAX central lubrication system (Pico) with removable pump guard • Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition • Wireless remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for single-track monitoring • Four extendable warning plates approx. 400 mm extension, size approx. 423 x 423 mm with position light • Bracket for beacon on the warning plates • 80 km/h speed stickers on the rear and both sides • Load pressure gauge to determine axle loads, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Durum: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Ppjdpfxoy Auhuo Ag Dsw Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Durum: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: Podpfx Agey Aufmj Depw * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Durum: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease Ppsdpfx Ajrvw U Sjg Dsw • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Durum: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear Podpoyvnfgjfx Ag Dopw * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each Pedpsyhkqzefx Ag Dspw * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high Ppodpfx Aow Tpq Dog Dsw - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Pedpfx Ajyhkrreg Djpw Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durum: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually Ppsdpfju Sd U Uex Ag Djw * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Durum: ikinci el, makine/araç numarası: YAMT14XX5K0104637, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2020, toplam uzunluk: 14.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2020, Chassis Chassis height: 90 cm King pin / fifth wheel diameter: 2 inch Structure Turntable height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Axle length: 90 cm Load floor length: 930 cm Ramp length: 405 cm Gooseneck length: 430 cm Maximum width: 305 cm (20 cm + 20 cm) Maximum length: 930 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: Saf Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; lift axle; left outer tyre tread: 15%; right outer tyre tread: 80% Axle 2: Twin tyres; left outer tyre tread: 60%; right outer tyre tread: 50% Axle 3: Twin tyres; steered; left outer tyre tread: 70%; right outer tyre tread: 70% Axle 4: Twin tyres; steered; left outer tyre tread: 75%; right outer tyre tread: 65% Weights Unladen weight: 11,480 kg Payload: 49,320 kg Gross vehicle weight: 60,800 kg Functional Body brand: Faymonville Loading platform height: 90 cm Identification Registration number: C525073 Ppedpou H D Taofx Ag Dow = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, makine/araç numarası: YAFTL408100008968, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2008, toplam uzunluk: 13.400 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.400 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2008, = Additional Options and Equipment = Ppedpfx Ajxhgirog Dsw - Steering axle - Drum brakes = Notes = Chassis Coupling pin / fifth wheel diameter: 2 inches Coupling pin / drawbar height: 120 cm Drum brake: ✓ Structure Year of manufacture: 2008 = Further Information = Axle Configuration Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Tyre size: 245/70 R17.5; Left tyre tread: 60%; Right tyre tread: 35% Middle axle: Tyre size: 245/70 R22.5; Left tyre tread: 25%; Right tyre tread: 50% Rear axle 1: Tyre size: 245/70 R17.5; Steering; Left tyre tread: 45%; Right tyre tread: 20% Rear axle 2: Tyre size: 245/70 R17.5; Steering; Left tyre tread: 50%; Right tyre tread: 60% Weights Unladen weight: 17,500 kg Payload: 47,500 kg Gross vehicle weight: 65,000 kg Functional Body make: Faymonville = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, azami yük ağırlığı: 36.990 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 09/2026, Donanım: ABS,

Durum: ikinci el, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, bir sonraki muayene (TÜV): 06/2027, Donanım: ABS, Ekipman listesinden bir bölüm. Tam ekipman listesi istek üzerine sağlanır. Yükleme alanı: * Sert ahşap zeminli yükleme alanı, arka tarafında yaklaşık 1.000 mm x 8°'lik bir eğimle * 2 çift bağlama halkası (LC 5.000 daN) * 1 çift bağlama halkası (LC 10.000 daN) * Dışa doğru katlanabilen 6 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 2 çift bağlama halkası (LC 10.000 daN) * Gerdirme bantlarının takılması için yükleme alanının dış çerçevesindeki kesikler (LC 2.000 daN) Dorse ayağı: Ppjdpjzn Ec Dsfx Ag Dew * 2 vitesli şanzımanlı, yaklaşık 24 ton kaldırma kapasiteli (yaklaşık 50 ton test yükü) JOST dorse ayağı (mekanik) Akslar: * BPW akslar, hava süspansiyonlu, disk frenli (yaklaşık 377 mm), kaldırma/alçaltma fonksiyonlu (ET 120) * Aks aleti Lastikler: * 435/50 R 19.5 lastikler Fren sistemi: * AB yönetmeliklerine uygun fren sistemi, EBS-E (2S2M), dorse çekiciye bağlantı hatları olmadan Çelik yapı: * Yüksek mukavemetli ince taneli çeliklerden yapılmış çelik yapı * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa), S690QL/S700MC (akma dayanımı 690 MPa) Boya: * Standart olarak bilye püskürtme işlemiyle hazırlanan kaynaklı şasinin birinci sınıf ve dayanıklı korozyon koruması, 2 bileşenli (2K) çinko tozlu astar ile garanti edilir. * Yüksek kaliteli 2 bileşenli (2K) tek renkli kaplama, RAL 3002 karmin kırmızısı renginde * Arka kısım metalik kaplama ve RAL 9010 (saf beyaz) renginde * Jantlar gümüş renginde Aşağıdaki ek ekipmanlar dahildir: * Çinko kaplı bağlantı çıtasına ön tarafta sarı-kırmızı renkli hava bağlantı elemanları * 4 adet fren pabucu, tutucu ile birlikte * 2 inç King pin * AB yönetmeliklerine uygun sarı reflektör şeridi, dorse üzerine yandan ve arkadan * Avrupa reflektör plakaları (kırmızı-sarı), dorse arkasında * Yüksek mukavemetli sert ahşap zeminli yükleme alanı * 1 adet yedek lastik tutucu, sürüş yönünde sağ tarafta, yükleme alanının altında * Yükleme alanının eğiminin altında çinko kaplı katlanabilir destekler * Takılabilir dingiller için 9 çift yuva, yaklaşık 100 x 50 mm, yükleme alanının dış çerçevesinde * Dorse arkasında bir çamurluk * USB çubukta kullanım kılavuzu ve açıklama * Dorse arkasında bir tur sinyal lambası için bir tutucu * Kuğu boynu ve arka sacın sol ve sağ tarafında, uyarı levhaları için tutucular ve priz dahil * Hız etiketi 80 km/s, arka tarafta ve her iki tarafta * Aks yüklerini belirlemek için yük manometresi, yük şeması dahil * Çinko kaplı çelik ön duvar (EN12642-XL), yaklaşık 1.600 mm yüksekliğinde * Aracın arkasında alüminyum rampa için kaydırılabilir bağlantı rayları * 2 adet INOX alet kutusu, yükleme alanının altında sol ve sağ tarafta, yaklaşık 600 x 350 x 600 mm * 6 çift WADER konteyner yuvası, yükleme alanında, 1x 20' konteyner, 2x 20' konteyner veya 1x 40' konteyner için * Yükleme alanında enine monte edilmiş 3 çift dingil yuvası, takılabilir dingiller için yaklaşık 100 x 50 mm * Kuğu boynunun altında 2 çift ve arka tarafta 2 çift Ferry halkası * Ön aks üzerinde, mevcut aks yüküne ve mevcut yükleme durumuna bağlı olarak TEBS E tarafından kontrol edilen kaldırma aksı * Geri vites yaparken akustik uyarı sinyali * Arka sac üzerine monte edilmiş 2 adet LED geri vites lambası * HRM metalik kaplama (Yüksek Dirençli Metalizasyon)

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2012, Donanım: ABS, = Additional options and accessories = - Drum brakes = Notes = Pedpfx Agox U D Als Djpw Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 900 cm Loading platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further information = Axle configuration Tyre size: 245/70 R17.5 Axle make: SAF Brakes: drum brakes Suspension: air suspension Front axle: twin tyres; left inner tread depth: 40%; right inner tread depth: 25% Center axle: twin tyres; left inner tread depth: 50%; right inner tread depth: 40% Rear axle: twin tyres; left inner tread depth: 15%; right inner tread depth: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck Psdpjzahp Sjfx Ag Depw * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.