Kullanılmış Faymonville 3-Achs-Beton-Innenlader-Prefamax satın al (38.919)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Dodel Sl Izopfx Aldscg
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer 4-Achs-Ballastauflieger
Çağrı
Koşul: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area:
- Cargo area with approx. 30 mm thick hardwood floor
- 10 pairs of outward-folding lashing rings
Landing legs:
- JOST landing gear with 2-speed gearbox for 24 t lifting capacity
Axles and tyres:
- BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable
- Air suspension with raise/lower valve
- Axle tools
- Tyres: 385/65 R22.5
Dcedpfxorq Dlfj Aldsg
Braking system:
- WABCO braking system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel construction made of high-strength fine grain steels
- Steel grades:
- S355J2+N / S355MC
- S690QL / S700MC
Electrics:
- Electrical system according to EU regulations, 24-volt lighting
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Painting:
- First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer
- High-quality single-colour 2-component top coat in Nova grey
- Rear section metallized and painted in RAL 9010
Accessories included:
- Cargo area with approx. 30 mm thick hardwood floor
- 2" king pin
- Galvanized steel front wall approx. 1,200 mm high, EN12642-XL
- Yellow-red air couplings at the galvanized front connection strip
- 4 wheel chocks with holder at the front wall
- Holder for 1,000 mm posts in the rear central beam
- At the gooseneck and the rear plate, holders for warning panels including socket, left and right
- Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles
- Electro-hydraulic power unit
- White reflective tape according to EU regulations on the sides of the trailer, red at the rear
- 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area
- European reflector plates at the rear of the trailer
- A holder for a revolving beacon at the rear of the trailer
- A mudflap at the rear of the trailer
- Manual and description on USB stick
- BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump
- TPMS tyre pressure monitoring system:
- The tractor unit must be capable of receiving and displaying this data in order for correct indication
- Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition
- Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control
- 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes
- 80 km/h speed stickers at rear and both sides
- Adjustable access ladders mounted on the left and right sides in the direction of travel
- 2 reversing lights mounted on the rear plate
- Load gauge for axle loads including load diagram
- HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished
Küçük ilan
Hoogerheide
2.766 km
Düşük yükleyici
Faymonville3-axle semi-lowbed trailer 48 t + ramps
Çağrı
Koşul: ikinci el, makine/araç numarası: YAFTL312000012613, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2012, = Additional options and accessories =
- Drum brakes
= Notes =
Dodpfxox U D Alj Aldecg
Chassis
Diameter of kingpin / fifth wheel: 2 inch
Height of kingpin / drawbar: 120 cm
Drum brake: ✓
Special transport
2-piece road plates: ✓
Hydraulic ramps: ✓
Length over axles: 900 cm
Loading platform length: 900 cm
Gooseneck length: 360 cm
Maximum width: 290 cm (250+20+20)
Extendable: ×
= Further information =
Axle configuration
Tyre size: 245/70 R17.5
Axle make: SAF
Brakes: drum brakes
Suspension: air suspension
Front axle: twin tyres; left inner tread depth: 40%; right inner tread depth: 25%
Center axle: twin tyres; left inner tread depth: 50%; right inner tread depth: 40%
Rear axle: twin tyres; left inner tread depth: 15%; right inner tread depth: 25%
Weights
Unladen weight: 11,000 kg
Payload: 37,000 kg
Gross vehicle weight: 48,000 kg
Identification
Registration number: C340521
= Company information =
For more information on this unit please call: or e-mail: .
A full stock overview can be found at: .
Please do not forget to subscribe to our newsletter for weekly updates on our stock.
Küçük ilan
Hoogerheide
2.766 km
Düşük yükleyici
Faymonville3-axle semi-lowbed trailer 50T + ramps
Çağrı
Koşul: ikinci el, makine/araç numarası: ***YAMT13XX6K0104043, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.410 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2019, Chassis
Chassis height: 87 cm
Kingpin / Fifth wheel diameter: 2 inch
Kingpin / Drawbar height: 120 cm
Special transport
2-piece road plates: ✓
Hydraulic ramps: ✓
Loading deck length: 930 cm
Ramp length: 395 cm
Gooseneck length: 415 cm
Low-loader: ✓
Maximum width: 300 cm (25 cm per side)
Maximum length: 1380 cm
Djdpfxsu H D R Ee Aldjcg
Extendable: ✓
Tank
Fuel: ✓
= Further information =
Axle configuration
Tyre size: 235/75 R17.5
Axle brand: SAF
Brakes: drum brakes
Suspension: air suspension
Axle 1: twin tyres; left outer tyre tread: 60%; right outer tyre tread: 60%
Axle 2: twin tyres; left outer tyre tread: 20%; right outer tyre tread: 30%
Axle 3: twin tyres; steering; left outer tyre tread: 55%; right outer tyre tread: 50%
Weights
Unladen weight: 10,040 kg
Payload: 30,960 kg
Gross vehicle weight: 41,000 kg
Functional
Body manufacturer: Faymonville
Loading platform height: 87 cm
Identification
Registration number: C505325
= Company Information =
For more information on this unit please call: or e-mail: .
A full stock overview can be found at: .
Please do not forget to subscribe to our newsletter for weekly updates on our stock.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEGigamax Tiefbett 1+3
Çağrı
Koşul: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Dcodpfxsyhkqne Aldjg
Excerpt from the equipment list. Complete specifications available upon request.
GOOSENECK:
* Gooseneck with integrated single-axle running gear (pendulum axle), removable design
* Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles
* Length: approx. 5,200 mm, with front chamfer approx. 60°
* Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7
* For tractor units: 6x4 or 8x4
* Detachable steel front wall, approx. 400 mm high, with chamfered design
* 1 pair of mechanical supports at the front of the gooseneck
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
* 1 spare wheel mount inside on the front wall of the gooseneck with bracket
* 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN)
* 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN)
* 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN)
* On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish
* On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish
* 3.5 inch kingpin
* TPMS tyre pressure monitoring system according to ECE R 141
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H)
LOADING DECK:
* Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick
* Length x width approx. 8,000 mm x 2,740 mm
* Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams
* One locking position approx. every 500 mm in the extension
* 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN)
* 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN)
* Folding extensions, approx. 230 mm per side (WITHOUT wooden planks)
* Extension planks, loose, framed in steel
* Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included
* 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN)
* 2 pairs of screw rings M24 (LC 8,000 daN) included
REAR RUNNING GEAR:
* Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear
* PENDULUM AXLE, all axles hydro-mechanically force-steered
* Hose rupture valve on axle compensation cylinder with automatic reset function
* Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position
* Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* 245/70 R 17.5 3PMSF. Brand at our discretion
* Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit
* 4 pairs
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
Faymonville4-1+3-A-Tele-Semi-Radmul.-Rampen-Gummibe
Çağrı
Koşul: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck:
- Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm
- Gooseneck rear with chamfer approx. 1,000 mm x 10°
- Suitable for tractor units: 6x2, 6x4, 8x4 short
Loading Platform:
- Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10°
- Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm
Two-Part Steel Ramps:
Dsdpfxeya E A Ns Aldocg
- One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide
- Ramps with rubber covering
- Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward
- "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform
- Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp
Axles, suspension, and tires:
- BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Tires 235/75 R 17.5
- TPMS tire pressure monitoring system compliant with ECE R141
- TPMS tire pressure sensors fitted on all wheels including spare wheels
Surface Treatment:
- Complete steel construction automatically shot-blasted with blasting machine after welding
- Second blasting process with corundum for optimal adhesion of the coating system
- HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection
- Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau
Included Accessories:
- Steel front wall, plug-in, approx. 400 mm high
- 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches
- 1 spare wheel
- External beam on gooseneck with mounting holes for screwable lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear area of the gooseneck
- On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized
- Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area
- 2" king pin
- Round NATO socket at the front connector strip
- 4 wheel chocks
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front cross beam
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward
- Extensions (galvanized) extendable by approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm
- Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams
- 1 pair of mechanical rear supports
- Remote control (radio and cable)
- Lifting axle at the front axle
- Square climbing strips 20 x 30 mm, approx. every 200 mm
- Central lubrication system with 1 pump
- Wabco Smart Board system
- 4 warning boards, approx. 423 x 423 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville2-Achs-Tiefbett-Pendelach.-Bolzen-Lasch.
Çağrı
Koşul: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long
- Gooseneck hydraulically lift/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4
Load bed:
- Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension
- Length 6,850 mm x width 2,540 mm
- One locking point approximately every 1,000 mm on the extension
Rear running gear:
- Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Axles, Suspension, and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically steered
- Hose rupture valve on axle compensation cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position
- Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires: 245/70 R 17.5
- TPMS tire pressure monitoring system according to ECE R 14
- TPMS pressure sensors mounted in all wheels, including spares
Included accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches
- One spare wheel with mounting adapter
- Gooseneck outer beams with mounting holes for bolt-on lashing rings
- Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck
- One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck
- Chequer plate cover over the gooseneck
- Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
- Gooseneck operation lighting with on/off switch
- Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly
- 2" king pin
- Anti-slip sticker on the left chamfer of the gooseneck
- Gooseneck closed at the rear upper area with a removable cover
- 4 chocks with holders
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed
- The ramps can be placed above or between the hooks
- Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck
- Prepared for bolt-on container supports for 1x20ft on the outer beams
- Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams
- With electro-pneumatic-hydraulic couplings
- Outer beams of the low bed with integrated sand coating as anti-slip protection
- Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps
- 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm
- Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps
- Remote control (radio and cable)
- 4 extensible warning signs approx. 423 mm x 423 mm
Djdpfxsvy Edce Aldocg
- Extensive lashing positions
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedri
Çağrı
Koşul: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck:
- Swan-neck with 30 mm thick hardwood flooring
- Swan-neck at the rear in straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable loading platform:
- Loading platform in extendable version
- 5 pairs of fold-out lashing rings
- 3 pairs of fold-out lashing rings
- 1 pair of horizontal lashing rings at the front of the loading platform
- Cut-outs in the outer frame of the loading platform for attaching tension belts
- Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Landing legs:
- JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tyres:
- BPW axles, two fixed and two steering axles
- Air suspension, drum brakes, with lift/lower function
- The steering axles can be locked electro-magnetically via reverse gear or manually
- Axle tools
- Tyres: 205/65 R17.5
Brake system:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel construction:
Djdpfx Ajt Ag Uwjldjcg
- Steel structure made of high-strength fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single colour in Nova grey
- Rear section metallized and painted in RAL 9010 (pure white)
Included accessories:
- One spare wheel with holder located in front of the bulkhead
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the front galvanized connection strip
- 4 wheel chocks with holder at the bulkhead
- Galvanized folding supports under the sloped part of the loading platform
- Holder for rotating beacon at the rear of the trailer
- Galvanized, extendable width extensions approx. 230 mm per side
- White reflective tape according to EU regulations on sides, at extension section, and red at rear
- On swan-neck and rear panel: one mount each for warning panels including socket (left and right)
- European reflective warning boards (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm
- The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm)
- 7 pairs of WADER container locks
- 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers
- 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform
- Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status
- Sliding hook-in rail for ALU loading ramps at the rear of the vehicle
- Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform
- Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp
- Mount for rotating beacon on warning panels
- Speed stickers 80 km/h at the rear and on both sides
- Load gauge to determine axle loads, including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville6-Achs-Tele-Semi mit PA-X Achssystem
Çağrı
Koşul: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10°
- Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles
- Open in the rear third
- For tractor units: 6x4 and 8x4
Loading Platform:
- Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10°
- A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm
- Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length
Ramps:
- One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide
- Hydraulically folding ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards
- "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform
- Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles, Suspension and Tyres:
- PA-X axle system, all axles forced steered hydro-mechanically
- Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically
- Hose rupture valve on the axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position
- 245/70 R 17.5 3PMSF
Dcedpfx Aek Af Svoldjg
Accessories Included:
- Removable steel front wall, approx. 400 mm high
- Supply line connection strip to tractor unit, mounted at the height of the outer frame profile
- 1 spare wheel
- Outer beams of the gooseneck with mounting holes for screwable lashing rings
- The first hole approx. 200 mm from the front, then spaced approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- Checker plate covering over the gooseneck
- 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck
- Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized
- 3.5" king pin / 2" king pin fitted
- Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- 4 axle load gauges
- Mechanical fixed support legs at the front
- 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm
- Mechanical fixed support legs at the front
- Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection
- 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements
- Painted sand coating on the supporting surfaces of the intermediate table
- Mechanical locking for securing the intermediate table in the extended position
- 8 pairs of stake pockets in the outer frame
- Extendable (galvanized) widening units approx. 230 mm per side
- 1 pair of hydraulic rear supports
- Central lubrication system
- 1 reversing light each left and right at the rear of the vehicle
- 3 kW electro-hydraulic power unit
- Widening boards, loose, in reinforced steel U-frame
- Radio and cable remote control
- 4 warning panels, approx. 423 x 423 mm
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville5-Achs-Tele-Semi m. hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck:
Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10°
Technical fifth wheel load: 23,000 kg
For tractor units: 6x2, 6x4 and 8x4
Loading Platform:
Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10°
A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm
Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length
Axles and Tyres:
BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
235/75 R 17.5 3PMSF twin tyres
Load index 143/141J (144/144F)
Two-part Steel Ramps:
One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
Hardwood covering
Hydraulically folding ramp tips
Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward
Braking System:
WABCO EBS-E brake system in compliance with EU regulations
Sockets and Lighting:
24-volt lighting system
Full Metallization:
Complete HRM metallization with ZINACOR 850 for optimal corrosion protection
Surface Treatment:
Entire steel structure shot-blasted automatically after welding using a blast wheel
Second blasting with corundum for optimal coating adhesion
Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax
Rims in silver grey
Steel Structure:
Steel structure made from high-tensile fine-grained steels
Steel grades: S355J2+N/S355MC, S690QL/S700MC
Accessories:
Plug-in steel front wall, approx. 400 mm high
Connection strip for supply lines to the tractor unit
Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches
Outer beam of gooseneck with mounting holes for bolted lashing rings
First hole approx. 200 mm from the front, then every approx. 400 mm
Dsdpfx Alemfqi Iodjcg
One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring
Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area
Gooseneck guide plate for the saddle plate, approx. 500 mm wide
Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles
Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate
Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform
1 sliding intermediate table for the telescopic tube with large cross-section
Operating valves for hydraulic ramps on right side of vehicle
Central lubrication system with 1 pump, standard grease according to NLGI-2
Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring
Küçük ilan
Bielefeld
2.512 km
Alçak şasi dorse
FAYMONVILLE4-Achs Multimax STN-4AX teleskopierbar+Lenkachse
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 40.800 kg, toplam ağırlık: 53.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2012, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Faymonville 4 dingilli Multimax STN-4AX teleskopik alçak şasi
Üretim tarihi: 11.2012
Boş ağırlık: 13.000 kg
Toplam ağırlık: 53.800 kg
Teknik olarak mümkün: 55.400 kg
Faydalı yük: 40.800 kg
Dsdpfx Asu Aynleldecg
Destek yükü: 25.000 kg
Lastik ebadı: 205.65R17,5
3. ve 4. dingil zorunlu yönlendirmeli
4x SAF dingil 7.600 kg, havalı süspansiyonlu
Uzunluk: 13.475 mm’den 20.275 mm’ye kadar (uzatılabilir)
Genişlik: 2.540 mm’den 2.620 mm’ye kadar
Yükseklik: 1.200 mm
Daha fazla bilgi e-posta yoluyla talep üzerine!
Bilgiler taahhütsüzdür/hatalar saklıdır!
İnternetteki bilgiler bağlayıcı olmayan tanımlamalardır ve taahhüt edilmiş özellikler değildir.
Satıcı, hata, yazım hatası ve veri aktarımında oluşabilecek hatalardan sorumlu değildir.
Değişiklik hakkı saklıdır.
Sürekli alım-satım,
kabul ve kiralama işlemleri
vinç ve kaldırma araçları
ile iş makinaları ve ağır nakliye araçları.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE6-Achs Multimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Extract from the specification. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
* For tractor units: 6 x 2, 6 x 4, and 8 x 4 short
Dcodpjrgzv Nsfx Aldog
* Detachable steel front bulkhead, approx. 400 mm high
* 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolt-on lashing rings
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN)
* 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
* 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish
* Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin
* 3.5-inch kingpin
* Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings)
* 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm
LOADING PLATFORM
* Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10°
* Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length
* BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
* Tyres: 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient)
* Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform
* 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements
* 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN)
* 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor
* 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535
* Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs
* Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett (Baggerbett)
Çağrı
Koşul: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment specification. Complete equipment details available on request.
Gooseneck
* Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4.
3-Axle Compact Front Bogie
* Hook mounts at front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Excavator Deck
* Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
5-Axle Rear Bogie
* Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendle axle
Front Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle
Dedpfsuvbdtox Aldjcg
5-Axle Rear Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey
Including Accessories
* Steel front wall, approx. 400 mm high
* Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish
* 3.5 kingpin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connectors on gooseneck
* BEKA-MAX central lubrication for one 3-axle bogie
* One 7-pin socket left and right at rear of the front bogie for warning panels
* Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension
* Steel mattresses with rubber flooring, approx. 12 mm thick
* One 7-pin socket left and right, front and rear on rear bogie for warning panels
* BEKA-MAX central lubrication for one 5-axle bogie
* Socket on rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
*
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+3) - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
Dcjdpfx Alotx Nwnedeg
* ASPÖCK UNIBOX at the front connection rail with sockets
* 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches)
* 1 pair of removable aluminum side boards, approx. 400 mm high, anodized
* One removable aluminum rear board, approx. 400 mm high, anodized
* Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering
* 2" kingpin
* Socket at the rear of the gooseneck for aluminum loading ramps
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
LOADING AREA
* Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10°
* A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered
* 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve
* Tires: 235/75 R 17.5 3PMSF, twin mounting
* Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient)
* 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section
* Extendable galvanised widenings, approx. 230 mm per side (without wooden planks)
* Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* Widenable U-profiles for inserting the aluminum covers:
- on the fixed section behind the gooseneck
- on the intermediate platform
- on the extendable loading area
* Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* 1 pair of mechanical rear supports
* Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit
HYDRAULIC LOADING RAMPS
* One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide
* Hydraulically foldable ramp tips
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually
* Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional
Küçük ilan
Legden
2.617 km
Alçak şasi dorse
FAYMONVILLESTN-4AUM 4.Achs Tieflader, Ausziehbar,Lenkachse
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir
* Takip kontroll aksı
Dsdpfxox I Uyho Aldecg
* Hidrolik yükleme rampaları
* Havalı süspansiyon
-----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz.
WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinTT 34 Zugrohr Gerade 34 t GG Tridem- Tieflader 3 Achs, gelenktNeufahrzeug
Çağrı
Koşul: yeni, boş ağırlık: 7.300 kg, azami yük ağırlığı: 26.700 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Şasi: Sıcak daldırma galvanizli, 70 mm kalınlığında ahşap taban, 18 adet yük bağlama halkası, 12 adet çıt cebi, 2 adet rampa (her biri 3.110 mm uzunluğunda x 760 mm genişliğinde), rampa dış kenarında ve arka eğimde tırmanma şeridi, tek parçalı hidrolik rampalar, yükleme yüksekliği: 880 mm, dingil yükü göstergeleri dahil, son aksın yönlendirme aksı olarak sunulması ek ücreti: 3.500 €, uyarı levhaları + aydınlatma ve döner uyarı lambası: 200 €, ahşap ile 3 m'ye genişletme: 300 €, rampaların hidrolik olarak yana kaydırılması: 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: !
Dcodpey N Rw Sjfx Aldeg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinT 3-6,60 VB 3 Achs Tieflader- Anhänger, Luftgefedert, Verbreiterung
Çağrı
Koşul: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading area total length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded height approx. 890 mm, 24 lashing rings each with 10 t capacity, 12 stake pockets in outer frame, loading ramps (approx. 3,100 x 750 mm), climbing strips on outside of ramps and rear slope, ramps laterally adjustable, 68 mm strong wooden floor, storage box with lid for lashing chains or tension belts, contour marking in accordance with regulations, rotating beacon, vehicle hot-dip galvanized, incl. axle load indicators, surcharge for: warning panels with lighting and rotating beacon, widening to 3 m with wood, price: 500 €, hydraulic ramp displacement, price: 1,000 €, excavator trough, price: 1,000 € net, -- Typographical errors, mistakes, and changes excepted, sample pictures --, More data at: !, More details: !
Dedoy N Rx Aspfx Aldscg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
MösleinST 3-Plato 9,4 3 Achs Satteltieflader Plato 45 t GGfür Fertigteile, Baumaschinen oder Container
Çağrı
Koşul: yeni, boş ağırlık: 8.050 kg, azami yük ağırlığı: 36.950 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, HOT-DIP GALVANIZED, Reinforced design, Air-suspended with lift axle, Axle load gauge for axle load, High bed length approx. 4,180 mm, Low bed length approx. 9,400 mm, Loading height approx. 900 mm, Front wall approx. 1,600 mm high, 14 stake pockets in outer frame, 3 cross stake bars, 24 lashing rings, 4 pairs of container locks for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, Surcharge for aluminum ramps = Price: €1,900, -- Subject to misprints, errors and changes, sample pictures --, More data at: !, More Details: !
Djdpfx Aley N Rvuedjcg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinTT 31 31 t GG Tridem- Tieflader 3 Achs, gelenktNeufahrzeug
Çağrı
Koşul: yeni, boş ağırlık: 6.950 kg, azami yük ağırlığı: 24.050 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Şasi: Sıcak daldırma galvanizli, 70 mm kalınlığında ahşap zemin, 18 adet yük sabitleme halkası, 12 adet payanda cebi, her biri 3.110 mm uzunluğunda ve 760 mm genişliğinde 2 rampa, hidrolik tek parça rampalar, yükleme yüksekliği: 880 mm, aks yük göstergeleri dâhil. Opsiyonel: Son aks yönlendirici aks olarak: 3.500 €, uyarı levhaları + aydınlatma ve döner lamba: 200 €, ahşaplarla 3 m'ye genişletme: 300 €, rampaların hidrolik kaydırılması: 1.000 €. K80 çekme halkası ile de temin edilebilir! -- Baskı hataları, yanlış anlamalar ve değişiklik hakkı saklıdır, örnek görsellerdir -- Daha fazla bilgi: !, More Details: !
Dodpfx Aley N Rvzjdecg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
KässbohrerLB3E 3 Achs Satteltieflader, komplett überfahrbar
Çağrı
Koşul: ikinci el, boş ağırlık: 10.720 kg, azami yük ağırlığı: 37.280 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2019, bir sonraki muayene (TÜV): 02/2027, süspansiyon: hava, lastik boyutu: 245/70 R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245/70 R17,5 ---/141J, arka lastik boyutu: 245/70 R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, tamamen üzerinden geçilebilir, -- yazım hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla bilgi için: !, More Details: !
Dcodpfxjy Nzg Rj Aldsg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
SchwarzmuellerT3 3 Achs Tiefladeranhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.420 kg, azami yük ağırlığı: 23.580 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2012, bir sonraki muayene (TÜV): 09/2026, süspansiyon: diğer, lastik boyutu: 235/75 R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R17,5 ---/140J, arka lastik boyutu: 235/75 R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlantı halkaları, direk cepleri, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler -- Daha fazla veri için: !, Daha fazla detay: !
Dsdpfx Aoy Niw Roldocg
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinT3-6 VB F 3 Achs Tieflader- Anhänger, Verbreiterung
Çağrı
Koşul: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.200 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Toplam yükleme alanı uzunluğu yaklaşık: 8.200 mm, alçak yatak yaklaşık: 6.000 mm uzunluğunda, yüklü yükseklik yaklaşık: 890 mm, 22 x her biri 10 tonluk bağlama halkası, dış çerçevede 10 x dikme cebi, rampa (yaklaşık 3.100 x 750 mm), rampaların ve arka eğimin dış kısmında tırmanma çıtası, rampalar yandan ayarlanabilir, 68 mm kalınlığında ahşap zemin, yük zincirleri veya gergi kayışları için kapaklı saklama kutusu, yönetmeliğe uygun dış hat işaretlemesi, tepe lambası, araç daldırma ile sıcak daldırma galvanizli, aks yük göstergeleri dahil, ek ücretli: aydınlatmalı ve tepe lambalı uyarı levhaları, ahşap ile 3 m’ye genişletme, fiyat: 500 €, ekskavatör kol için oyuk, fiyat: 1.000 € net. Baskı hataları, değişiklikler ve yanlışlıklar saklıdır, örnek resimlerdir. Daha fazla bilgi: !, Detaylar: !
Dcedpfxjy Niv Ho Aldjg
Küçük ilan
Schwebheim
2.317 km
Açık yarı römork
FlieglSDS350 3 Achs Sattelauflieger
Çağrı
Koşul: ikinci el, boş ağırlık: 7.375 kg, azami yük ağırlığı: 27.625 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2012, yükleme alanı uzunluğu: 13.650 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/65R22,5 160J, arka lastik boyutu: 385/65R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Stake pockets, -- typographical errors, mistakes, and changes reserved, sample images --, More data at: !, More details: !
Dedpfxjy Nivtj Aldecg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinTT 31 31 t GG Tridem- Tieflader 3 Achs, gelenktNeufahrzeug
Çağrı
Koşul: yeni, boş ağırlık: 6.950 kg, azami yük ağırlığı: 24.050 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Şasi: Sıcak daldırma galvanizli, 70 mm kalınlığında ahşap taban, 18 bağlama halkası, 12 dikme cebi, 2 adet 3.110 mm uzunluğunda x 760 mm genişliğinde rampa, hidrolik tek parça rampalar, yükleme yüksekliği: 880 mm, aks yük göstergeleri dahil. Ek ücretler: Son aksı yönlendirici olarak: 3.500 €, uyarı tabelaları + aydınlatma ve döner ışıklı lamba: 200 €, ahşaplarla 3 m'ye genişletme: 300 €, rampaların hidrolik kaydırılması: 1.000 €, yan ve ön paneller: 3.500 €. K80 çekme gözlü olarak da temin edilebilir! -- Yazım hatası, yanlışlık ve değişiklik hakkı saklıdır, örnek görseller -- Daha fazla bilgi için lütfen iletişime geçin!
Dsdpfx Asy Nivgjldecg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinT 3-9,20 F Blatt 3 Achs Tieflader mit gerader Ladefläche 9 m, Neufahrzeug
Çağrı
Koşul: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading platform length: 9,000 mm, loading height (laden) approx. 900 mm, 20 lashing eyes each rated at 10 t, 16 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), ramps adjustable sideways, spring assist for one-piece ramps, wooden floor 70 mm thick, toolbox with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized,
Surcharges for:
— Warning panels with lighting and beacon = Price: €800
Dcjdpfx Aoy Nirzjldjg
— Widening to 3 m = Price: €1,100
— Hydraulic one-piece ramps €500
Also available with 8.10 m loading platform length + widening in stock.
Printing errors, mistakes, and changes excepted. Sample images. More data at: !, More details: !
Sizin için aramayı kolaylaştırıyoruz: "faymonville 3-achs-beton-innenlader-prefamax"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

























































































































































































































































