Kullanılmış Faymonville F-S43-1Ejb 9500 Mm! satın al (41.134)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website. Extract from the equipment specification below.
Complete equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize cargo deck length, approximately 3,700 mm long, with a rear bevel approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* Grating surface on the gooseneck and rear bevel with 5 mm sheet metal reinforcement
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
* On the gooseneck: 1 pair of removable aluminium drop sides, approx. 400 mm high, anodized finish
* 1 LED work light mounted at the top left and right of the front wall, wired to the trailer head connection bar
CARGO DECK:
* Cargo deck length approx. 9,600 mm, rear bevel approx. 900 mm x 6°
* Deck area behind the gooseneck hydraulically raisable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
* Full-length grating surface with approx. 5 mm steel support plate on the lift bed and cargo deck for additional reinforcement, designed for point loading
TYRES:
235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion
* TPMS tire pressure monitoring system according to ECE R 141
AXLES:
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering
* 3rd axle with electro-magnetic reverse lock, can be activated via reverse gear and manually
* 1st axle with traction aid
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
HYDRAULIC LOADING RAMPS:
* 1 pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and 900 mm wide
* Ramp tips hydraulically foldable
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward individually
* Flashing lights on the outer sides of the ramp tips, with switch next to the ramp controls
* Ramp safety in transport position using quick release
* Painted sand coating on the outer frame of the ramp and on the ramp tip
* Mechanical drop-leg side supports in the ramps to assist when docking at unloading bays
* Controls for the hydraulic ramps located on the right side of the vehicle
BRAKE SYSTEM:
Brake system by WABCO EBS-E, compliant with EU regulations
SURFACE TREATMENT:
* HRM metallization of the complete chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure optimal corrosion protection
PAINTWORK:
Iedpfx Abey Auhhj Teat
* Semi-trailer in carmine red (RAL 3002)
* Rims in silver grey
* Drop sides ALU natural
* Wheel hubs per axle manufacturer specification
* Lamp panel pure white (RAL 9010)
EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. interface bar for service lines to tractor unit installed approx. 1,000 mm from lower edge of external frame profile
* Lashing chain attachment points on the interior of the front wall, left and right, with aluminium tray below on left and right for storing chains or tension straps
* Behind the front wall, approx. 12 mm thick DELIGNIT lining, bolted
* 2 additional pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller
* Deflection pulley for the cable winch with shackle and bolted lashing point
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website.
Excerpt from the equipment. Full specification available upon request.
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Load area:
* Load area with rear bevel, approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering
Two-part steel ramps:
* 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area
* Ramps with hydraulically foldable sections and hydraulic lifting device
* Maximum load per pair: 30,000 kg
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steer axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Tyres:
* Tyres: 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
Iedpfoy Auhuox Ab Toat
* Tyre Pressure Monitoring System (TPMS) according to ECE R 141
Braking system:
* WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection
* Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
* Wheel rims in silver
Incl. accessories:
* One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket
* 1 spare wheel carrier under the load area on the right
* 2-inch kingpin
* One galvanized steel front wall
* At the galvanized front connection rail: yellow-red air couplings
* 4 wheel chocks with holders at the front wall
* 3-tier wooden planks
* Galvanized folding supports under the rear bevel
* Holder for beacon at the rear of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm
* Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm
* EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls)
* 3 pairs of movable stanchions in the load area
* Body hydraulically expandable to left/right at rear by approx. 750 mm
* Sliding roof with high-lift portal carrier
* Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details upon request.
Gooseneck:
* Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform in extendable design:
* Extendable load platform with rear bevel approx. 1,000 mm x 8°
* 6 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be activated via reverse gear and manually
* Air suspension with raise/lower valve
* Axle tool
Brake system:
* Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Steel construction:
* Steel construction of high-strength fine-grained steels
* Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Painting:
* Complete steel structure automatically blast-cleaned after welding with shot-blasting system
* Secondary blasting with corundum for optimum coating adhesion
* Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL
* Wheel rims in silver grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Paint system tested in salt spray fog test according to ISO 9227-NSS
* Cavity sealing with special wax
Electrical system:
* Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098
Accessories included:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection strip at the front
* 4 wheel chocks with holder at the front wall
* Provision at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under the rear bevel of the loading area
* On the gooseneck and rear panel left and right, each with a holder for warning boards including socket
* Load manometer to determine axle loads including load diagram
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm)
* One galvanized toolbox integrated in the beveled gooseneck
Iasdpfoy Aufmsx Ab Tot
* 3 pairs WADER C

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Sittensen
2.523 km
Açık yarı römork
FAYMONVILLESPZ-3A Plattform, ausziehbar auf 21m, Gelenkt
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2007, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.200 mm, Donanım: ABS, Uzatılabilir dorse, toplam uzunluğu 21300 mm olacak şekilde 7700 mm'ye kadar uzatılabilir, elektrikli hidrolik pompa, hidrolik sistem için el pompası, NATO harici marş soketi, yükleme alanının ortasında 3 adet dikme yuvası rayı, her iki tarafta 10'ar dikme yuvası, zemine gömülü 10 çift ağır hizmet tipi sabitleme halkası, tüm çevrede ve arkada ikaz lambası, JOST destek ayakları, ABS, EBS, aks(lar), akslar hidrolik olarak yönlendirilebilir, kampanalı fren sistemi, kaldırma-alçaltma özellikli havalı süspansiyon, merkezi yağlama sistemi. Araç reklam kaplamalı ve/veya yazılı olabilir.
SI86629
Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, iş ortaklarımızın atölyelerinden teklif sunmaktan memnuniyet duyarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir.
Bu araç için size finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız.
Iedpfxoyumito Ab Tsat
Lütfen bizimle iletişime geçin!
Küçük ilan
Sittensen
2.523 km
Çalışma platformlu yarı römork
FAYMONVILLESPZ-3A Plattform, ausziehbar auf 21m, Gelenkt
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2007, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.200 mm, Donanım: ABS, Dorse, toplam uzunluğu 7.700 mm’den 21.300 mm’ye kadar uzayabilir, elektrikli hidrolik pompa, hidrolik sistem için el pompası, NATO harici çalıştırma soketi, yük alanı ortasında 3 x dikme yuvası rayı, her iki tarafta 10’ar dikme soket yuvası, tabana gömülü 10 çift ağır hizmet tipi sabitleme halkası, arka kısmında döner ikaz lambası, JOST destek ayakları, ABS, EBS, aks/akslar hidrolik olarak yönlendirilebilir, kampanalı fren sistemi, kaldırma-alçaltma fonksiyonlu hava süspansiyonu, merkezi yağlama sistemi, araç reklam giydirilmiş ve/veya yazılı olabilir.
SI86629
Iedeyumi Hspfx Ab Tjat
Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni bir TÜV muayenesi isterseniz, iş ortaklarımızdan size memnuniyetle bir teklif sunarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.
Bu ürün için size bir finansman veya leasing teklifi sunmaktan memnuniyet duyarız.
Lütfen bizimle iletişime geçin!
Küçük ilan
Gilze
2.728 km
Düşük yükleyici
FaymonvilleSTN-3U / HYDRAULIC RAMP / LIFT AXLE / SEMI TRAILER
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, toplam uzunluk: 12.700 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: mavi, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment =
- Lift axle
= Remarks =
SAF axle with drum brakes.
1 x lift axle.
1 x steering axle – self-tracking / trailing steering.
= Further Information =
Iasdpfx Absy Daxzj Tjt
Axle configuration
Tire size: 235/75R17.5
Brakes: Drum brakes
Suspension: Air suspension
Rear axle 1: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40%
Rear axle 2: Twin tires; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%
Rear axle 3: Twin tires; Steered; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50%
Weights
Unladen weight: 10,500 kg
Payload: 44,500 kg
Gross vehicle weight: 55,000 kg
Identification
Type number: STN-3U / HYDRAULIC RAMP / LIFT A
= Company Information =
ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from the published texts.
Küçük ilan
Roosendaal
2.760 km
Yarı alçak yükleyici
Faymonvilleextentadable 20m disconnectable front + 42000kg...
Çağrı
Koşul: mükemmel (kullanılmış), ilk tescil: 09/2015, yükleme alanı uzunluğu: 20.180 mm, yükleme alanı genişliği: 3.000 mm, renk: diğer, Üretim yılı: 2015, Damages: none
Ijdpsymrb Sofx Ab Tsat
YAFTL2007F0017329
= Further Information =
Unladen weight: 13,600 kg
Payload: 28,400 kg
Gross vehicle weight (GVW): 42,000 kg
Technical condition: very good
Visual condition: very good
Price: On request
Registration number: DW205AH
= Company Information =
If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the provided information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber.
MOB: Dutch) Available on WhatsApp and Viber.
When paying by bank transfer, the funds must be transferred to the bank account listed below. Always check the payment details specified on our website. If you have received different information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Küçük ilan
Dortmund
2.568 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
Faymonville3-A-Semi-Ladebo.-abklappba.-Heck-Hilfsle
Çağrı
Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with a 1,000 mm x 6° taper
- Suitable for tractor units: 4 x 2 and 6 x 2
Loading Platform:
- Loading platform, approx. 9,700 mm in length, with hydraulically folding and lowering rear, as well as hydraulically raisable front section for driving onto the gooseneck
Axles and Tyres:
- BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering
- 3rd axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- 235/75 R 17.5 3PMSF twin tires
- TPMS tire pressure monitoring system according to ECE R 141
BPW Auto Reverse Control:
- Electro-hydraulic auxiliary steering for the self-steering axle of a 3-axle assembly
- Automatic control of the trailing steering axle during reversing via gyroscope sensor
- Manual steering operation in forward and reverse via separate wireless remote control
- Manual operation enabled up to 10 km/h
- System powered by a separate electro-hydraulic unit
Accessories Included:
- Removable steel headboard, approx. 400 mm high
- 3 kW electro-hydraulic power unit
- Outer beams of the gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from the front, then every approx. 400 mm
- Additional mounting hole at the rear upper section of the outer beams for a bolted lashing ring
- Grating platform with 5 mm sheet metal reinforcement on gooseneck and rear taper
- 2" kingpin
- Gooseneck guide plate for fifth wheel, approx. 500 mm wide
- Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917)
- 1 pair of removable, anodized ALU side walls on the gooseneck, approx. 400 mm high
- 4 wheel chocks
- Electric winch, approx. 5,400 kg pulling force, with radio remote control
- Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller
- Winch mounting located at the front inside the gooseneck
- Continuous grating floor with 5 mm sheet base as additional reinforcement, rated for point load:
- on the lift bed
- on the loading platform
- on the hydraulically lowerable rear section
- Painted anti-slip sand coating on the gooseneck’s cover plates, as well as in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps
- 1 spare wheel
- Hydraulic lift bed, approx. 2,500 mm long, loadable in raised driving position: 9,000 kg
- Hydraulic cylinders equipped with load-holding valves
- Cut-outs in the outer frame of the platform and the lift bed for attaching tension belts
- Extensive lashing points
- Hydraulic rear section can be lowered for loading/unloading and raised to reduce total train length
- Loadable in driving operation in horizontal position: 10,000 kg
- Reduction of overall train length when raised: 2,350 mm
- Painted anti-slip sand coating on the entire ramp, except for the extendable galvanized ramp section
- Hydraulically extendable rear extensions for loading/unloading
- Wireless remote:
- Operation of hydraulic lift bed
- Operation of hydraulic lifting device for rear extension
- Operation of hydraulic extension for rear extension
- 1st axle with traction assist
Iedpeyw Sakjfx Ab Teat
- Central lubrication system with 1 pump
- 4 warning panels, approx. 423 x 423 mm, extendable
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U
Technical Data
Speed: 80 km/h
Gross vehicle weight: 49,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Unladen weight (+/- 3%): 10,547 kg
Payload approx.: 38,953 kg
Gooseneck length: 3,850 mm
Fifth wheel height loaded: 1,200 mm
Loading platform length: 9,300 mm
Extendable by: 0 mm
Axle spacing: 1,360 mm
Steering angle radius (rear): 2,300 mm
Loading height at max. load: 860 mm
Overall width: 2,540 mm
Suspension travel: -55/+145 mm
Technical Description
Gooseneck:
Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading platform:
Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°.
6 pairs of folding lashing rings facing outward (LC 5,000 daN).
Iaedsg Sk Tropfx Ab Tet
2 pairs of folding lashing rings facing outward (LC 10,000 daN).
1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN).
Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN).
Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering.
Ramps:
Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering.
Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally.
Maximum load per pair: 40,000 kg
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R 17.5 tyres as per manufacturer's selection.
Axles:
SAF axles, air-suspended, with drum brakes, featuring lift/lower function.
Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually.
Axle tools.
Brake System:
Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit.
Steel Construction:
Steel construction made from high-strength fine-grained steel.
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Painting:
Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible.
Electrical System:
Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections.
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories Included
2" king pin
One galvanized steel front bulkhead approx. 400 mm high.
At the galvanized front connection strip yellow/red airline couplings.
4 wheel chocks with holder on the front bulkhead (± 5kg).
Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON).
Galvanized folding supports under the rear slope of the loading platform.
Bracket for a rotary beacon at the rear of the trailer.
Control valves for the ramps installed on right-hand side of trailer (± 4kg).
Yellow reflective tape according to EU regulations on the sides and rear of the trailer.
Electro-hydraulic unit mounted at the rear under the loading
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEPlateauauflieger MAX200-N-3A-13.60-19.5-2.54
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54
Technical Data
Speed: 80 km/h
Iajdpfeg Sk Tvsx Ab Tjt
Gross vehicle weight: 45,000 kg
Fifth wheel load: 18,000 kg
Axle load: 27,000 kg
Tare weight (+/- 3%): 8,844 kg
Payload approx.: 36,156 kg
Platform length: 13,600 mm
Loaded fifth wheel height: 950–1,050 mm
Swing clearance at rear: 2,300 mm
Extendable by: 3,400 mm
Axle spacing: 1,360 / 1,405 mm
Overall width: 2,540 mm
Technical Description
Load platform:
Load platform in extendable design with pneumatically operated locking mechanism.
2 pairs of lashing rings (LC 5,000 daN).
1 pair of lashing rings (LC 10,000 daN).
6 pairs of fold-out lashing rings (LC 5,000 daN).
2 pairs of fold-out lashing rings (LC 10,000 daN).
Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN).
Landing legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Axles:
SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120).
Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually.
Axle tools (± 80 kg).
Brake system:
Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit.
Steel construction:
Steel structure made of high-strength fine-grain steels.
Steel grades:
S355J2+N / S355MC (yield strength 355 MPa)
S690QL / S700MC (yield strength 690 MPa)
Paintwork:
Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice.
Rear section metallised and painted in RAL 9010 (pure white).
Metallic paint not available.
Electrical system:
Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3).
ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin.
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Standard accessories included:
Yellow-red air couplings on the galvanised front connector panel.
2 wheel chocks with holders.
2" kingpin.
Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant.
Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer.
European reflective warning plates (red-yellow) at the rear of the trailer.
Platform with approx. 38 mm hardwood floor (± 320 kg).
10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg).
1 spare wheel holder under the platform, right-hand side in direction of travel.
Tyres 435/50 R 19.5, manufacturer’s choice.
One mud flap at the rear of the trailer.
Manual and documentation on USB stick.
Bracket for rotating beacon at the rear of the trailer.
At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket.
One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg).
6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg).
4 pairs of WADER container locks (± 60 kg).
10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg).
3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg).
Storage for 1,000 mm plug-in stakes (± 45 kg).
1 spare wh
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMegamax Tiefbett 2x12 t PA
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website.
Partial equipment overview. Complete specifications available on request.
Gooseneck:
* Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long, hydraulically liftable/lowerable and detachable
* Technical fifth-wheel load: 25,000 kg
* Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Low-bed:
* Low-bed designed as a telescopic vessel bridge in low-profile construction with front extension and mechanical locking
* Dimensions: approx. 6,850 mm x 2,540 mm (L x W)
* Supply lines protected within the extendable beams and automatically adjust to the respective low-bed length
Axles and Suspension:
* PENDLE-AXLE
* All axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation
* Cylinders with automatic RESET function
* Hydraulic cylinders with shut-off valves and locking pins for securing in the raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Tyres: 245/70 R 17.5
* Rear chassis with closed outer frame, checkered plate covering, and continuous prism excavator recess approx. 1,250/700 x 505 mm, open at the rear
Braking System:
* WABCO EBS-E braking system according to EU regulations, without connection cable to the tractor unit
Paintwork:
* Trailer color, RAL 3002 Carmine Red
Included accessories:
* Plug-in steel front wall, approx. 400 mm high
* 3 kW electric-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches, supply connections at the tractor unit not installed)
* Outer beam of gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring left and right on the rear bevel of the gooseneck (LC 6,000 daN)
* 2-inch king pin
* One locking point approx. every 500 mm on the extension
* 1 pair steel ramps with climbing strips and mounting pins for bridging the low-bed hook mounts
* 1 lashing ring each left and right on the front cross member (LC 10,000 daN)
* Lashing rings with retaining spring every approx. 1,200–1,300 mm on the outside of the inner beams of the loading deck
* Lashing rings with retaining spring every approx. 1,200–1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams
* Recesses above the lashing rings
* 1 hanging lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outside of the loading deck outer beams
* Preparation for removable load floor
* Hook-in strip at the front of the rear chassis towards the low-bed for loose approach ramps
* Chassis with chamfered rear corners
* Hook-in strip for loose aluminium approach ramps at the vehicle’s end cross beam
* Remote steering from front and rear operable via cable remote control with push buttons, including single track control for axles, not installed in the tractor unit
Isdex Uvllopfx Ab Tjat
* Mechanical pin and tab coupling from the low-bed to the chassis for changing the loading platform or installing extension beams, with electro-pneumatic-hydraulic couplings
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
* 2 axle load pressure gauges mounted on the left side
Including special accessories:
* On the gooseneck, 1 pair of plug-in aluminium sidewalls, approx. 400 mm high, anodized finish.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
Isdpjyvnfgefx Ab Tjat
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate covering over the axles
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF, brand of our choice
Axles:
* BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function
* The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually
* Axle tools
Brake System:
* WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098)
Paintwork:
* Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red
* Rear section metallized and painted RAL 9010 (Pure White)
* Rims in silver
Accessories:
* Spare wheel holder in front of the front wall (without spare wheel)
* 2" king pin
* Galvanized steel front wall approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection rail
* Recess at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under rear bevel of platform
* Bracket for warning beacon at trailer rear
* Brackets on both sides of gooseneck and rear for warning panels incl. socket
* TPMS tyre pressure monitoring system according to ECE R 141
* Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm)
* Galvanized toolbox integrated in the beveled gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container
* Adjustable mounting rails for ALU loading ramps at the vehicle rear
* 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform
* Galvanized outriggers extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control depending on current axle load and load condition
* 2 LED reversing lights mounted on rear panel
* 2 pairs of ferry-
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Sattelauflieger - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the specification. Full equipment details available upon request.
LOAD AREA:
* Gooseneck, length approx. 3,900 mm with central beam
* Load area with double telescopic extension, length approx. 9,300 mm
* A support table approx. 200 mm wide is permanently welded to the central beam
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points)
* Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system in compliance with ECE R 141
* BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice
* ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic functions
* 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward
* 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN)
Iaedpfx Aboyvnd No Tet
* 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 at the rear of the gooseneck
* 2-inch king pin
* Mechanical landing legs with 2-speed gearbox and crank
* 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm
* 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward
* Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit
* Last axle with air bellows venting activated by applying the parking brake
* Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL
* Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917)
* 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection
* Approx. 32 mm wooden floor on the gooseneck and load area
* On the large cross-section telescopic tube, one locking position at approx. every 500 mm
* On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm
* Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN)
* 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm
* 4 wheel chocks with holders under the load area
* 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel
* 1 LED work light mounted left and right in front of the axles with wiring
* 2 axle load gauges mounted on the left side with axle load diagram included
* 1st axle with automatic lift axle function and start-up a...
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the specifications. Complete specifications available on request.
Loading area:
* Loading platform with approx. 30 mm thick hardwood floor
* 9 pairs of lashing rings, foldable outwards (LC 10,000 daN)
* 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm
Landing legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data.
Axles and suspension:
* BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable
* Air suspension with lift/lower valve
Brake system:
* WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
Iaedpoyu Eu Iofx Ab Tst
* ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa)
Painting:
* Complete steel structure automatically shot-blasted after welding using a shot blast machine
* Second abrasive treatment with corundum for optimal coating adhesion
* HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection
* Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system
* Rear section metallized and painted in RAL 9010 Pure White
* Rims painted silver-grey
* Paint finish tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Accessories included:
* Loading platform with approx. 30 mm thick hardwood floor
* 2 inch kingpin
* One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high
* At the galvanized front connection strip, DUOMATIK air couplings
* Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear
* Mounts for warning boards, including sockets, left and right at gooseneck and rear panel
* White reflective tape on the sides and red at the rear, according to EU regulations
* 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame
* European reflective signs (red-yellow) at the rear of the trailer
* Mount for a flashing beacon at the rear of the trailer
* One rear mud flap
* Manual and documentation on USB stick
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump
* 4 wheel chocks with holder on the front wall
* Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit)
* Electro-hydraulic unit
* 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list.
Full equipment details upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Steel front wall, detachable, approx. 400 mm high
* ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets
* 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish
* Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering
* 3.5 inch king pin
* Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
* Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917)
* 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN)
LOADING PLATFORM:
* Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length
* BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock via reverse gear and manual activation
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tyres – brand at our discretion
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg
* On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements
* At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit
* TPMS tire pressure monitoring sensors installed in all wheels
Ijdpfx Absxarmae Tsat
* Platform locking with conically welded locking profiles every 500 mm
* Locking control left and right on the trailer
* For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension
* 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN)
BRAKE SYSTEM
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett Kombination ATX
Çağrı
Koşul: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website.
Excerpt from the equipment list. Complete specification available on request.
Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4
Iasdpfow Tgp Dsx Ab Tst
3-axle compact front bogie:
* Hook coupling at the front and rear. Length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Low bed:
* ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick
* Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear
* Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm
* Loading height approx. 480 mm with ground clearance of approx. 150 mm
5-axle rear bogie:
* Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* Pendulum axle
3-axle front bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
5-axle rear bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paint finish:
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection
* Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system
Includes accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version
* 3.5" king pin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with a separate air connection for pneumatic tools
* BEKA-MAX central lubrication for a 3-axle bogie
* Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams
* Without container locks
* Brackets on the outer beams of the loading platform for attaching foldable extensions
* One 7-pin socket left and right, front and rear, on the rear bogie for warning signs
* BEKA-MAX central lubrication for a 5-axle bogie
* Socket on the rear bogie for the cable remote control for rear axle steering
* Rear bogie with trough
* 2 LED reversing lights mounted on the rear plate
* European reflective signs (red-yellow) at the rear
* One mudflap at the rear
* One LED beacon with bracket left and right on the end cross member
* Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck
* 1-cycle
Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi dorse
FAYMONVILLECargo-NZ-5L Balllastauflieger gelenkt
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 65.350 kg, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2020, With air suspension, hydraulic dual-circuit forced steering (turntable design)
- Platform design "Plateau" for crane ballast
- Corners at right angles, closed outer frame
- Linkage integrated at the front of the frame
- Turntable-mounted fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge
- Fifth wheel load: 28,000 kg
- Undercarriage turning radius: 2,700 mm
Chassis
- 5-axle chassis with air suspension incl. lift and lower valve
- Axles by SAF
- Tyres: 445/65 R 22.5
Iaodpfx Aex I U Eqsb Tst
Braking system
- Two-line, full air, all-wheel braking system with diaphragm brake cylinders
- Automatic load-dependent brake (ALB)
- Automatic slack adjusters (AGS)
- Parking brake with spring-loaded actuators
- ABV (ABS)
- 1st and 2nd axles liftable (in direction of travel)
Technical Data
Loading platform (L x W) approx. 12,500 x 2,550 mm
Coupling dimension B: 11,550 mm
Loaded floor height "in chassis area" approx. 1,490 mm, with loaded coupling height of 1,200 mm
Steering
1st axle: steered ahead
2nd axle: fixed
3rd to 5th axle: hydromechanically forced-steered (dual-circuit steering)
Radio remote control
Electric power unit
Küçük ilan
Bovenden
2.411 km
Alçak şasi dorse
FaymonvilleSTN-4AX, Ausziehbar auf 16,8m, 2x Lenkachse
Çağrı
Koşul: ikinci el, boş ağırlık: 9.600 kg, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2011, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 205/65R17.5, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lift/lower function, 3rd and 4th axles with self-steering, ABS (anti-lock braking system), extendable, lashing eyes, loading ramps attachable, front and rear supports, side aluminum underrun protection, storage box.
Iasdpfsxxkqzex Ab Tet
Body: 4-axle low-loader trailer with attachable loading ramps, SAF axles, 3rd and 4th axles with self-steering, 13 pairs of lashing rings, 10 pairs of preparations for insertable stakes, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm low-bed height, low-bed length retracted approx. 9,500 mm, TÜV (MOT) due, aluminum ramps available at an extra charge of EUR 1,500. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale and errors excepted.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Çağrı
Koşul: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook pick-up at front and rear
- Chassis length x chassis width approx. 2,200 mm x 2,850 mm
Excavator Deck 'BB-A':
- Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
- Loading height 550 mm with ground clearance 150 mm
4-Axle Rear Bogie:
- Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back
- Bogie length x bogie width approx. 5,480 mm x 2,850 mm
- Numerous lashing points
Pendulum Axle and Tyres (Front and Rear Bogie):
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Burst hose valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in raised position
- Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres: 285/70 R19.5
Remote Steering:
- Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring
- Socket for remote steering operation on the gooseneck
Iedpfx Aowcmhaob Tsat
- Cable remote control with push-buttons including single-track alignment monitoring
Included Accessories:
- At the galvanized connection bar at the front: yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" kingpin
- One 7-pin socket at left and right rear of the gooseneck for warning signs
- Support bracket with winch for spare wheel at the front of the gooseneck
- Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings
- Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized
- Control lever on the gooseneck protected by a fold-down cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up
- 2 spare wheels
- One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign
- Front bogie with separate air connection for air tools
- Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel deck inserts can be placed in 2 positions to create a lowered loading area
- Steel mats with 12 mm thick rubber surface
- Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings
- One locking position every approx. 500 mm at the extension with mechanical lock
- Socket for cable remote control of the remote steering at the rear bogie
- 2 reversing lights on the rear panel
- Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light
- 1 work light left/right on the rear panel of the gooseneck with separate on/off switch
- Two INOX toolboxes approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
- Wireless remote control for the remote steering
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Çağrı
Koşul: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
• Gooseneck with rear bevel approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Loading platform:
• Extendable loading platform with rear bevel approx. 500 mm x 8°
• 9 pairs of outwards folding lashing rings
• 1 pair of flat lashing rings at the front of the loading platform
• Cut-outs in the outer frame for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate covering above axles
Landing gear:
• JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles
• Technical axle load: 12,000 kg
• 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually
• Tyres 235/75 R 17.5 3PMSF
Braking system:
• WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M)
Paintwork:
Isdpfema Hf Rox Ab Teat
• First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single colour MB 7350 Novagrau
• Rear section metallised and painted RAL 9010 (pure white)
Steel construction:
• Fabricated from high-tensile fine-grained steels
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Equipment:
• One spare wheel with holder in front of the bulkhead
• 2" kingpin
• Galvanised steel front bulkhead approx. 400 mm high
• Yellow-red air couplings on galvanised connection strip at the front
• 2 wheel chocks with holder mounted to the bulkhead
• Provision at rear of gooseneck for ALU loading ramps
• Galvanised extendable deck wideners, approx. 230 mm per side
• Bracket for beacon at the rear of the trailer
• Galvanised supports under the rear bevel of the loading platform
• White reflective tape to EU regulations on sides, extension; red at the rear
• Mounting hardware for warning signs with socket at gooseneck and rear, left and right
• Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm
• Removable rear galvanised stanchions (body length approx. 2,560 mm)
• 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame
• Lift axle on front axle with TEBS E control, responsive to axle load and load status
• Adjustable mounting rails for ALU loading ramps at rear
• 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel
• BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection
• 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm
• Mounting for beacon on warning signs
• European reflective plates (red-yellow) at rear of trailer
• 80 km/h speed stickers on rear and both sides
• Load gauge to determine axle loads including load diagram
• HRM Metallisation (High Resistance Metallisation) of outer frame
• Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Çağrı
Koşul: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4.
Loading Platform:
Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned.
Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length.
Axles and Tyres:
BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion.
Sockets and Lighting:
24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850.
Paint Finish:
Iaedpfxerigw Re Ab Tet
6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax.
Accessories:
Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us.
3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide.
2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle.
1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard).
Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit.
Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included.
One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version.
Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity.
Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Çağrı
Koşul: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
Iaodpfx Abowhywfo Tot
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 2-Achs-Tiefbett mit Pendelachsen
Çağrı
Koşul: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long
- Gooseneck hydraulically height-adjustable and detachable
- Technical fifth wheel load: 23,000 kg
- Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
- Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm
- Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings foldable outward
Iedpfxohlz R So Ab Tsat
- 1 pair of lashing rings lying in the trough
- 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame
Pendulum Axle and Tires:
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position
- Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R17.5
- TPMS (Tire Pressure Monitoring System) compliant with ECE R 141
Accessories:
- Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel
- On the galvanized connection strip at the front: yellow-red air couplings
- 4 wheel chocks
- Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings
- Electro-hydraulic unit
- White reflector tape on sides, extension and rear, according to EU regulations
- European reflector panels (red-yellow) at the rear of the trailer
- At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
- 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4
- Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized plug-in posts are removable (body length approx. 2,560 mm)
- Gooseneck at the upper rear area closed with a removable cover
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Fold-out extensions, approx. 230 mm per side
- 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN)
- 1 pair of steel ramps for bridging the low bed’s mounting hooks
- Sanded layer painted on the loading platform as an anti-slip coating
- Speed stickers 80 km/h on rear and both sides
- Rear chassis’ bucket recess at the rear closed with a plug-in plate
- Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm
- Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determining axle loads
- HRM (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville3-Achs-Tiefbett-Pendelachsen-Bolzen-Laschenkupp.
Çağrı
Koşul: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly)
Low bed:
- Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front
- Length x width approx. 7,550 mm x 2,740 mm
- Mechanical locking of the extension
Chassis:
- Rear chassis with closed outer frame
- Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear
Axles, Suspension, and Tyres:
- “PENDEL-AXLE”, all axles hydromechanically forced steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260"
- Technical axle load 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres
Accessories:
- Detachable steel front wall, approx. 400 mm high
Ijdeh Hm Tzjpfx Ab Tjat
- 4 wheel chocks
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks
- Ramps can be placed over or between the hooks
- Mounting points for steel loading ramps at the rear between the external beams of the gooseneck
- One locking position approximately every 1,000 mm on the extension
- 1 lashing ring each left and right on the front cross member
- Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile
- 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings
- 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards
- 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings
- Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps, brand BEKAMAX
- Remote steering from front and rear, operable via cable remote control, with single-track control of axles
- 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches
- Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Loose widening boards, framed in steel
- 4 warning panels approx. 423 x 423 mm
- Radio remote control for remote steering operation
- 3.5" kingpin
- Anti-slip stickers on the left bevel of the gooseneck
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide
- 1 spare wheel with mounting adapter
- Parking position on the gooseneck for warning panels when not in use
- 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm
- Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear
- Trailer colour MB 7350 Novagrau
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Çağrı
Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
Ijdpfx Ajh Hm Thjb Tjat
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Sizin için aramayı kolaylaştırıyoruz: "faymonville f-s43-1ejb 9500 mm!"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay




































































































































































































































































