Kullanılmış Faymonville F-S43-1Ejb 9500 Mm! satın al (43.620)

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container Fsdjunrapopfx Apbopl - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of outwards folding lashing rings • 1 pair of flat lashing rings at the front of the loading platform • Cut-outs in the outer frame for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate covering above axles Landing gear: • JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles • Technical axle load: 12,000 kg • 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Braking system: • WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M) Paintwork: • First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single colour MB 7350 Novagrau • Rear section metallised and painted RAL 9010 (pure white) Steel construction: • Fabricated from high-tensile fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Equipment: Fpjdpfx Apema Hf Rjbol • One spare wheel with holder in front of the bulkhead • 2" kingpin • Galvanised steel front bulkhead approx. 400 mm high • Yellow-red air couplings on galvanised connection strip at the front • 2 wheel chocks with holder mounted to the bulkhead • Provision at rear of gooseneck for ALU loading ramps • Galvanised extendable deck wideners, approx. 230 mm per side • Bracket for beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflective tape to EU regulations on sides, extension; red at the rear • Mounting hardware for warning signs with socket at gooseneck and rear, left and right • Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame • Lift axle on front axle with TEBS E control, responsive to axle load and load status • Adjustable mounting rails for ALU loading ramps at rear • 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel • BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection • 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm • Mounting for beacon on warning signs • European reflective plates (red-yellow) at rear of trailer • 80 km/h speed stickers on rear and both sides • Load gauge to determine axle loads including load diagram • HRM Metallisation (High Resistance Metallisation) of outer frame • Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation

Durum: ikinci el, boş ağırlık: 10.650 kg, azami yük ağırlığı: 40.310 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Her kullanılmış her römork için güncel ve eksiksiz bir inceleme ve fonksiyon raporu sağlanır. Kuğu boynu: -30 mm kalınlığında sert ahşap kaplamalı kuğu boynu -Arka kısmı düz tasarımlı kuğu boynu -3 çift bağlama halkası (LC 5.000 daN) Çekilebilir tasarımlı yük platformu: -Çekilebilir tasarımlı yük platformu -Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) -Yük platformunun ön tarafında yatay konumlandırılmış 1 çift bağlama halkası (LC 10.000 daN) -Gergi bantlarının asılması için yük platformunun dış çerçevesindeki kesikler (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı metal levha kaplama Akslar ve lastikler: -BPW akslar, iki sabit aks, iki yönlendirilebilir aks -Hava süspansiyonlu, tamburlu frenli, kaldırma/alçaltma fonksiyonlu -Yönlendirilebilir akslar, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -Aks anahtarı -Lastik ölçüsü 205/65 R17.5 -TPMS lastik basıncı izleme sistemi, ECE R 141'e uygun Ekipman (dahil): -Ön duvarın önünde bir adet yedek lastik ve tutucu -2" Kral pim -Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar -Ön taraftaki galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları -Ön duvara monte edilmiş 4 adet takoz -Yük platformunun eğimli kısmının altında galvanizli katlanabilir destek ayakları Fedpfxjxwnfmo Apbopl -Römorkun arka tarafında çok yönlü bir uyarı lambası için bir tutucu -Her iki tarafta yaklaşık 230 mm uzatılabilir galvanizli genişletmeler -AB yönetmeliklerine uygun, yanlarda beyaz reflektör şeridi, çekilebilir kısımda ve arkada kırmızı -Kuğu boynunda ve arka sacda, her iki tarafta da uyarı levhaları için tutucu ve priz dahil -Römorkun arka tarafında bir çamurluk -Römorkun arka tarafında Avrupa reflektör levhaları (kırmızı-sarı) -Kuğu boynunda, yaklaşık 2.440 x 400 mm boyutlarında takılabilir ALU yan paneller ve arka panel -Arka, galvanizli takılabilir çıtalar çıkarılabilir. Yapının uzunluğu yaklaşık 2.560 mm -7 çift WADER konteyner cebi: -Yük platformunda 1 adet 20 ft'lik konteyner -Yük platformunda 1 adet 40 ft'lik konteyner -Kuğu boynunun üzerinde 1 adet 40 ft'lik konteyner -2 adet 20 ft'lik konteyner -1 çift WADER konteyner cebi ile destek ayağı (maksimum yük kapasitesi yaklaşık 20.000 kg) -Yük platformunun dış çerçevesinde 100 x 50 mm boyutlarında 7 çift çıta cebi -Ön aks üzerinde, mevcut aks yüküne ve yükleme durumuna bağlı olarak TEBS E aracılığıyla kontrol edilen hareketli aks -Aracın arka tarafında ALU rampa için hareketli bir montaj çubuğu -Kuğu boynunda ve yük platformundaki tırtıklı metal levhalar üzerinde, kaymayı önlemek için entegre edilmiş bir kum tabakası -Yaklaşık 423 x 423 mm boyutlarında, konumsal bir lamba ile donatılmış, yaklaşık 400 mm kadar uzatılabilen dört adet uyarı levhası -Uyarı levhalarında çok yönlü uyarı lambası için bir tutucu -Arka tarafta ve her iki tarafta 80 km/h hız etiketi -Aks yüklerini belirlemek için yük manometresi ve yük şeması dahil

Durum: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of foldable lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact front chassis: * Hook mounting front and rear, length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear chassis: * Mechanical bolt-eye coupling for mounting a low bed at the front * Rear end cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: * 8 x (M+S) 285/70 R19.5 as per manufacturer specification Fpedpfx Apsxbmpljbol * Rear chassis tyres: * 16 x (M+S) 285/70 R19.5 as per manufacturer specification * Load index 150/148J Paintwork: * Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch king pin * Truck hydraulic connection with flow control (20 l/min) * Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works * BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-connection hydraulic couplers on the gooseneck * Front chassis with separate air connection for pneumatic tools * BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right at the rear of the front chassis for warning panels * Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2 * Socket on the rear chassis for the cable remote control of the rear steering * Rear chassis with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right * 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery * Remote control: * Operation of the powerpack, engine start/stop * Operation of the rear steering, in addition to the cable remot

Durum: yeni, azami yük ağırlığı: 48.930 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Geniş ürün yelpazemizdeki araçlarımıza, anında ve kısa sürede teslim edilebilen araçlarımız için web sitemizden ulaşabilirsiniz. Ekipman listesinden bir bölüm. Tam ekipman listesi talep üzerine sağlanacaktır. Kaz Boynu * Ön kısımda yaklaşık 45° açılı köşelerle ve arka kısımda yaklaşık 750 mm x 10° açılı eğimle * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Yük Platformu * Arka kısımda yaklaşık 500 mm x 8° açılı eğimle çift açılır tasarımda * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 4 çift bağlama halkası (LC 10.000 daN) * Yük platformunun ön kısmında yatay konumda 1 çift bağlama halkası (LC 10.000 daN) * Yaklaşık 250 mm genişliğinde 1 adet ara masa * Yük platformunun dış çerçevesinde, gerdirme bantlarının asılması için oyuklar (LC 2.000 daN) * Yaklaşık 48 mm kalınlığında sert ahşap kaplama, akslar üzerinde tırtıllı sac kaplama Akslar * BPW akslar, hidro-mekanik zorlamalı yönlendirme * Teknik aks yükü: 12.000 kg (her biri) * Kaldırma ve indirme valfi ile hava süspansiyonu Lastikler * 245/70 R 17.5 3PMSF, yük indeksi (146/146 F) * TPMS lastik basıncı izleme sistemi, ECE R 141'e uygun Dorse Ayakları * JOST dorse ayakları (mekanik), yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımanlı Fren Sistemi * AB yönetmeliklerine uygun olarak EBS-E (4S3M) Çelik Konstrüksiyon * Yüksek mukavemetli ince taneli çeliklerden * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa) Fedpfx Apozlwm Aebjpl * S690QL/S700MC (akma dayanımı 690 MPa) Elektrik Sistemi * AB yönetmeliklerine uygun, aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) * Tüm LED yan işaretleme lambaları, sinyal ile birlikte yanıp söner * ASPÖCK-UNIBOX, ön bağlantı çubuğunda, 24N, 24S ve 15 kutuplu bağlantı prizleri ile ISO'ya uygun Boya * Kaynak işleminden sonra tüm çelik konstrüksiyon, otomatik olarak bir döner püskürtme sistemi ile temizlenir * Kaplama sisteminin optimum yapışması için korundum ile ikinci temizleme işlemi * Tüm araç şasisinin HRM metalizasyonu, en iyi korozyon korumasını sağlamak için ZINACOR 850 (%85 çinko/%15 alüminyum) ile * RAL 3002 Kırmızı renginde, RAL 841GL sistemine uygun, 2 kat 2K üst kat boya ile son kat boya * Jantlar gümüş rengindedir. Arka kısım metalize edilmiştir ve RAL 9010 (saf beyaz) rengine boyanmıştır * Metalik boya mümkün değildir * ISO 9227-NSS'ye göre tuzlu su püskürtme testi ile test edilmiş boya yapısı * Boşlukların özel balmumu ile kapatılması Aşağıdaki ek ekipmanlar dahildir: 2 inç Kral Pimi * Elektro-hidrolik ünitesi (± 45 kg) * Ön ve arka kısımda, butonlar aracılığıyla kontrol edilebilen kablolu uzaktan kumanda ile direksiyon (aks kontrolü ile) (SZM'de kurulum olmadan) * Kaz boynunda ve arka sac üzerinde, sol ve sağ tarafta, uyarı levhaları için birer adet tutucu, priz dahil * Dorse arka kısmında döner lamba için bir tutucu * Kaz boynunda, takılabilir alüminyum yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm (U x Y) * Arka galvanizli bağlantı elemanları çıkarılabilir. (Kasa uzunluğu yaklaşık 2.560 mm) (± 46 kg) * Eğik kaz boynuna entegre edilmiş, galvanizli bir alet kutusu (± 47 kg) * Yük platformunda 4 çift WADER konteyner cebi, 20', 2x 20', 40 veya 45'lik bir konteyner için (± 40 kg) * Yük platformunun dış çerçevesinde, takılabilir bağlantı elemanları için 7 çift bağlama cebi, yaklaşık 100 x 50 mm (± 21 kg) * Her biri yaklaşık 230 mm genişliğinde, dışa doğru uzatılabilen galvanizli genişletmeler (± 262 kg) * Alüminyum rampalar için

Durum: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Donanım Özeti Kaz boynu * Ön kısımda yaklaşık 45°'lik açılı köşeler ve arka kısımda yaklaşık 750 mm x 10°'lik eğim ile * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Yükleme platformu * Arka kısımda yaklaşık 500 mm x 8°'lik eğim ile çift olarak açılabilen tasarım * Dışa doğru katlanabilen 6 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 4 çift bağlama halkası (LC 10.000 daN) * Yükleme platformunun ön tarafında yatay konumda bulunan 1 çift bağlama halkası (LC 10.000 daN) * Yaklaşık 250 mm'lik bir ara masa * Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıllı sac kaplama * Gerdirme bantlarının takılması için yükleme platformunun dış çerçevesindeki boşluklar (LC 2.000 daN) Akslar * BPW akslar ve süspansiyon, tüm akslar hidro-mekanik olarak zorlanmış direksiyonlu * Teknik aks yükü: her biri 12.000 kg * Kaldırma ve indirme vanası ile hava süspansiyonu * Aks aleti Lastikler * 245/70 R 17.5, yük endeksi (146/146 F) * Firmamızın seçimine göre Dorse ayakları * Yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımanlı JOST dorse ayakları (mekanik) Fren sistemi * AB yönetmeliklerine uygun olarak EBS-E (2S2M) sistemi, çekiciye bağlantı hatları olmadan Boya * Standart olarak bilye ile püskürtülmüş kaynaklı şasinin mükemmel ve uzun ömürlü korozyon koruması, 2 bileşenli (2K) çinko tozu astar ile garanti edilir. * Yüksek kaliteli 2 bileşenli (2K) * Tek renk RAL 3002 karmin kırmızısı renginde üst kat boya * Arka kısım metalik olarak boyanmış ve RAL 9010 (saf beyaz) rengindedir. * Metalik boya uygulaması yapılamaz. Çelik yapı * Yüksek mukavemetli ince taneli çeliklerden üretilmiştir. * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355MPa) S690QL/S700MC (akma dayanımı 690MPa) Elektrik sistemi * AB yönetmeliklerine uygun olarak * Aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) * Ön taraftaki bağlantı şeridi üzerinde ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu prizler ile * ISO'ya uygun bağlantı. 24N ISO-1185 24S ISO-3731 15 kutuplu ISO-12098 Fpjdpezlwm Nofx Apbol Aşağıdaki ek donanımlar dahildir: * 2 inçlik König bağlantı pimi * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Galvanizli ön bağlantı şeridi üzerinde sarı-kırmızı hava bağlantı elemanları * Ön duvar üzerinde 4 adet fren takozu ve tutucu (± 5kg) * Ön duvarın önünde bir adet yedek lastik tutucusu * Elektrik-hidrolik ünitesi (± 45kg) * Ön ve arka taraftan, kablo uzaktan kumandası ve basma düğmeleri aracılığıyla kontrol edilebilen direksiyon takviyesi, aksların tek şerit kontrolü ile (çekicide montajı olmadan) * Kaz boynunun arka kısmında alüminyum rampalar için yuva * Dorse arka kısmında Avrupa standartlarına uygun reflektörlü plakalar (kırmızı-sarı) * AB yönetmeliklerine uygun olarak, yanlarda, açılır platformda ve dorse arka tarafında sarı reflektör şeridi * Kaz boynunda ve arka sac üzerinde, sol ve sağ taraflarda, her birinde uyarı levhaları için birer tutucu ve priz bulunur * Aracın arka kısmında alüminyum rampalar için asma çubuğu * Dorse arka kısmında çok yönlü bir lamba için tutucu * Yükleme platformunun eğiminin altında galvanizli katlanabilir destekler * Dorse arka kısmında bir çamurluk * Kullanım kılavuzu ve açıklamalar USB belleğinde * Arka ve yanlarda 80 km/saat hız etiketi * Aks yüklerinin belirlenmesi için yük manometresi ve yük diyagramı.

Durum: ikinci el, azami yük ağırlığı: 25.600 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2027, Donanım: ABS, Ekipman özetinden bir bölüm. Tam ekipman için lütfen talepte bulunun. * Kuğu boynu * Kuğu boynu Light, uzunluk yaklaşık 4.080 mm * Hidrolik olarak yükseltilebilir/alçaltılabilir ve geri çekilebilir kuğu boynu * SZK (çekiciye bağlanabilen yarı römork) için: 4 x 2 ve 6 x 2 * Alçak platform * Ön kısımda uzatılabilir ve mekanik kilitlemeli teleskopik bir ekskavatör köprüsü olarak tasarlanmış alçak platform. Uzunluk x genişlik yaklaşık 6.350 mm x 1.300 mm * Arka şasi * Kısa versiyonda, kapalı dış çerçeve ve ekskavatör oluğu ile oluklu sac kaplamalı arka şasi. Bu, arka yarıda hava tanklarının yerleştirilmesi için kapalıdır. * Akslar ve süspansiyon * BPW akslar ve süspansiyon, tüm akslar hidro-mekanik olarak zorlanmış şekilde yönlendirilmiştir * Teknik aks yükü: 12.000 kg * Yükseltme ve alçaltma valfi ile hava süspansiyonu * Aks aracı * Lastikler * 235/75 R 17.5 3PMSF çift lastik * Yük indeksi 143/141J (144/144F) * Fren sistemi * AB düzenlemelerine uygun WABCO EBS-E marka fren sistemi * Çekiciye bağlanabilen yarı römork ile bağlantı kablosu olmadan * Boya * 6-K son işlem * Kaynak işleminden sonra tamamen çelik yapı kumlanmıştır * Çinko bazlı 1 kat astar, 1 kat yapışma astari Fsdpfx Apozlmkwjbepl * 2 kat 2K boya (akrilik) ile tek renk RAL 3002 Kırmızı boya, ardından özel wax ile boşlukların yalıtımı * Jantlar gümüş rengi * Aksesuar (dahil) * Takılabilir çelik ön panel, yaklaşık 400 mm yüksekliğinde * Dış çerçeve profilinin yüksekliğinde, SZK'ye güç besleme hatları için bağlantı çubuğu * Bağlantı çubuğunun ön tarafında yuvarlak NATO fişi (Maeler & Kaege VG 96 917) * Hidrolik işlemleri kontrol etmek için 3 kW elektro-hidrolik ünite (hidrolik vinçler hariç) * Kuğu boynunda 3 çift gömülü bağlama halkası (LC 5.000 daN) * Ön tarafta, ön panelin yaklaşık 600 mm arkasında ve arka tarafta kuğu boynunda 2 çift kaynaklanmış bağlama halkası LBS 3 (LC 6.000 daN) * Kuğu boynunun dış çerçevesinde 2 çift kaynaklanmış bağlama halkası LBS 3 (LC 6.000 daN) * Kuğu boynunda 2 çift takılabilir alüminyum yan duvar, yaklaşık 400 mm yüksekliğinde, eloksal kaplama * Kuğu boynunda, eloksal kaplama, takılabilir alüminyum arka duvar, yaklaşık 400 mm yüksekliğinde * Kuğu boynunun üzerinde, yaklaşık 12 mm kalınlığında Delignit kaplama * 2 inç König pim * SZK veya bir destek tekerleği üzerine kuğu boynunu desteklemek için hidrolik travers * Kuğu boynunda hava bağlantısı ve hava tabancası * Kuğu boynuna tırmanma imkanı * Kuğu boynunda gömülü 2 çift direk cebi, yaklaşık 100 x 100 mm takılabilir direkler için * Dış borunun üzerinde, M24 vidalı bağlama halkalarını monte etmek için dişli delikler (LC 8.000 daN) * 2 çift M24 vidalı bağlama halkası (LC 8.000 daN) dahil * Üst kirişin dışında, yaklaşık her 1.200 mm'de, vidalı halkalar (LC 8.000 daN) için ø26 mm'lik takma imkanı * Dış taşıyıcıda 10 çift bağlama halkası RBS-5 (LC 10.000 daN), genişleticilerin altında ve aralarında * Katlanabilir, uzatılabilir genişleticiler, yaklaşık 2.550/2.750/3.000 mm'ye kadar sabitlenebilir, ayrılmış çelik minderler dahil, ahşap kaplama ile * Şasinin ön tarafında, yaklaşık 350 mm x 12°'lik bir eğim, entegre takma çıtaları ile ön ve arka tarafta, gevşek rampalar için * Alçak platformdan ekskavatör oluğuna geçişte, 2 çift tutma yayı ile bağlama halkası (LC 10.000 daN) * Şasi dış çerçevesinde 3 çift gömülü bağlama halkası, dışa doğru katlanabilir: ön ve arka tarafta 1'er çift (LC 5.000 daN), ortada 1 çift (LC 10.000 d

Durum: yeni, azami yük ağırlığı: 46.800 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Web sitemizde hemen ve kısa sürede kullanıma hazır olan tüm araçlarımızı bulabilirsiniz. Donanım Özeti: Tam donanım talep üzerine sunulmaktadır. Kaz Boynu * Ön tarafta yaklaşık 45° açılı köşelerle ve arka tarafta yaklaşık 750 mm x 10° açıyla eğimli kaz boynu * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Çekilebilir Tasarımlı Yük Platformu * Arka tarafta yaklaşık 1.000 mm x 8° eğim * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) * Yük platformunun ön tarafında yatay konumda 1 çift bağlama halkası (LC 10.000 daN) * Gergi bantlarının takılması için yük platformunun dış çerçevesinde oyuklar (LC 2.000 daN) * Aksların üzerinde çıkıntılı yüzeyli çelik levha kaplama ile yaklaşık 48 mm kalınlığında sert ahşap kaplama Akslar * BPW akslar ve süspansiyon * 1. aks sabit, diğer tüm akslar hidro-mekanik olarak zorunlu olarak yönlendirilir * Teknik aks yükü: her biri 12.000 kg * Kaldırma ve indirme valfli hava süspansiyonu * Aks aleti * Lastikler * 245/70 R 17.5 3PMSF * Yük indeksi (146/146 F) * TPMS: ECE R 141'e uygun TPMS lastik basıncı izleme sistemi Dorse Destekleri * Yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımana sahip JOST dorse destekleri (mekanik) Fren Sistemi * AB yönetmeliklerine uygun olarak EBS-E (4S3M) ile donatılmıştır Boya * Kaynak işleminden sonra tüm çelik yapı, otomatik olarak döndürme disk sistemi ile püskürtülerek temizlenir * Kaplama sisteminin optimum yapışması için korund ile ikinci temizleme işlemi * En iyi korozyon korumasını sağlamak için tüm araç şasisinin HRM metalizasyonu ile ZINACOR 850 (%85 çinko / %15 alüminyum) kaplama * 2 kat 2K üst kat boya ile son kat boyama * RAL 3002 Kırmızı renkte, RAL 841GL sistemine uygun tek renk * Jantlar gümüş gri renkte. Arka kısım metalize edilmiştir ve RAL 9010 (saf beyaz) renginde boyanmıştır * Metalik boya mümkün değildir * Boya uygulaması, ISO 9227-NSS tuz sisi püskürtme testinde test edilmiştir * Özel bir balmumu ile boşlukların kapatılması Fedpfx Aozk S Dmjpbopl Çelik Yapı * Yüksek mukavemetli ince taneli çeliklerden yapılmıştır * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa) S690QL/S700MC (akma dayanımı 690 MPa) Elektrik Sistemi * AB yönetmeliklerine uygundur Aydınlatma * 24 Volt ASPÖCK-NORDIK (ASS3) * Tüm LED yan işaret lambaları, sinyal lambasıyla birlikte yanıp söner * Ön bağlantı panelinde 24N, 24S ve 15 kutuplu prizli ASPÖCK-UNIBOX * ISO'ya uygun bağlantı. 24N ISO-1185 24S ISO-3731 15 kutuplu ISO-12098 Aşağıdaki ek ekipmanlar dahildir * 2 inç Kral pim * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Elektrikli-hidrolik ünite (± 45 kg) * Ön ve arka taraftan, kablo uzaktan kumandası aracılığıyla düğmelerle kontrol edilebilen takip direksiyonu, aksların tek şerit kontrolü ile (SZM'de kurulum olmadan) * Arka kısımda, eğimli kısımda, merkeze monte edilen taşıyıcı üzerinde yatay konumda 1 çift gömme bağlama halkası (LC 10.000 daN) (± 3 kg) * Kaz boynunda, takılabilir alüminyum yan ve arka duvarlar, yaklaşık 2.440 x 400 mm (U x Y) * Arka galvanizli takılabilir kirişler çıkarılabilir. (Yapının uzunluğu yaklaşık 2.560 mm) (± 46 kg) * Eğimli kaz boynunda entegre, galvanizli bir alet kutusu (± 47 kg) * Yük platformunda, 20' (30?) veya 40? konteyner için 3 çift WADER konteyner cebi (± 30 kg) * Yük platformunun dış çerçevesinde yaklaşık 100 x 50 mm boyutlarında 6 çift kiriş cebi (± 18 kg) * Her iki tarafta yaklaşık 23

Durum: ikinci el, azami yük ağırlığı: 25.630 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 11/2026, Donanım: ABS,

Durum: ikinci el, azami yük ağırlığı: 65.350 kg, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 05/2020, With air suspension, hydraulic dual-circuit forced steering (turntable design) - Platform design "Plateau" for crane ballast - Corners at right angles, closed outer frame - Linkage integrated at the front of the frame - Turntable-mounted fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge Fjdpsx I U Eqsfx Apbepl - Fifth wheel load: 28,000 kg - Undercarriage turning radius: 2,700 mm Chassis - 5-axle chassis with air suspension incl. lift and lower valve - Axles by SAF - Tyres: 445/65 R 22.5 Braking system - Two-line, full air, all-wheel braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake with spring-loaded actuators - ABV (ABS) - 1st and 2nd axles liftable (in direction of travel) Technical Data Loading platform (L x W) approx. 12,500 x 2,550 mm Coupling dimension B: 11,550 mm Loaded floor height "in chassis area" approx. 1,490 mm, with loaded coupling height of 1,200 mm Steering 1st axle: steered ahead 2nd axle: fixed 3rd to 5th axle: hydromechanically forced-steered (dual-circuit steering) Radio remote control Electric power unit

Durum: ikinci el, toplam ağırlık: 44.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, Unladen weight: 11,800 kg Overall length: 12,000 mm Extendable forwards for front loading of the coupled flatbed bridge - Gooseneck in compact design - Length x width: 3,900 x 2,480 mm - Interchangeable 2" king pin - Integrated hydromechanical steering - Hydraulic lift and lowering function, including support cylinders - Designed for a technical fifth-wheel load of up to 24 t - 4-sided aluminium drop sides - Steering angle: 2,200 mm Flatbed bridge - Low-bed with external tubes - Flatbed length: 6,750 mm, extendable by 5,500 mm to a total of 12,250 mm Fpodpfx Apsy U Df Hsbel - Flatbed width: 2,550 mm - Construction height: 200 mm - Loaded deck height approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Front coupling hooks for connection to the gooseneck 2-axle chassis - Chassis in compact design - Air-suspended chassis (L x W) approx. 2,750 x 2,550 mm incl. lift and lower valve, with 2 forced-steered axles, manufacturer BPW, wheelbase 1,330 mm - Chassis with centre trough Braking system - Dual-line all-wheel pneumatic brake system - Progressive central lubrication system - Radio remote control - Coupling height loaded: 1,250 mm - Both axles hydraulically forced-steered

Durum: ikinci el, makine/araç numarası: YAFTL208100007948, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.010 mm, Üretim yılı: 2008, = Diğer seçenekler ve donanımlar = - Arka havalı süspansiyon - Ön havalı süspansiyon - Tambur fren sistemi = Diğer bilgiler = Fpjdpfjziivwsx Apbel Ağırlıklar Boş ağırlık: 11.660 kg Yükleme kapasitesi: 26.340 kg Azami toplam ağırlık: 38.000 kg Durum Genel durum: ortalama Teknik durum: ortalama Optik durum: ortalama Diğer bilgiler Ön lastik durumu: %70 Ön lastikler: 245/70 R17.5 Arka lastikler: 245/70 R17.5 Son muayene: 2026-06-29 Diğer bilgiler Daha fazla bilgi için Lastas Sales ile iletişime geçin.

Durum: yeni, azami yük ağırlığı: 45.115 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Diğer araçlar için lütfen iletişime geçiniz. Donanımın tamamı talep üzerine verilir. Yükleme alanı: - Yaklaşık 30 mm kalınlığında sert ağaç döşemeli yükleme alanı - Dışa doğru katlanabilir 8 çift yük sabitleme halkası (LC 10.000 daN) Yarı römork ayakları: - JOST marka mekanik yarı römork ayakları, iki kademeli şanzıman ile yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test kapasitesi) Lastikler: - 385/65 R 22.5 - TPMS lastik basıncı izleme sistemi, ECE R 141’e uygun. Motor aracı ile veri iletişimi ISO 11992’ye göre standartlaştırılmış EBS arayüzü üzerinden yapılır. Doğru gösterim için motorlu araç bu verileri aktarabilmeli ve gösterebilmelidir. Akslar ve süspansiyon: - BPW akslar, teknik olarak her biri 10.000 kg - 1. ve 3. aks hidromekanik zorunlu yönlendirmeli, döner tabla üzerinde; 2. aks sabit - Havalı süspansiyon, kaldırma ve indirme valfi ile - Aks takımı ekipmanı Fren sistemi: - Wabco fren sistemi, AB yönetmeliklerine uygun, EBS-E (4S3M), çekici araca bağlantı hatları olmadan Elektrik sistemi: - AB yönetmeliklerine uygun elektrik sistemi, 24 volt aydınlatma ASPÖCK-NORDIK (ASS3) - Ön bağlantı barasında ASPÖCK-UNIBOX, 24N, 24S & 15 pinli prizler ISO’ya uygun - 24N ISO-1185 - 24S ISO-3731 - 15 pin ISO-12098 Çelik konstrüksiyon: - Yüksek mukavemetli ince taneli çeliklerden üretilmiş çelik yapı - Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355MPa), S690QL/S700MC (akma dayanımı 690MPa) Boya: - Tüm çelik yapı, kaynak işlemi sonrası otomatik türbinli makine ile kumlanır - Mükemmel kaplama yapışması için ikinci kez korund ile kumlama - Son kat boyama: iki kat 2K son kat boya, tek renk RAL 3002 Karmin Kırmızı (RAL sistemi 841GL'ye uygun) - Arka kısım metallize ve RAL 9010 (Saf Beyaz) renkte boyalı - Jantlar gümüş renkte - Tuz püskürtme testi (ISO 9227-NSS) ile boya sisteminin test edilmesi - Boşluklarda özel mum ile sızdırmazlık Aksesuarlar: - Yaklaşık 30 mm kalınlığında sert ağaç döşemeli yükleme alanı - 2” king pin - Galvanizli çelik ön panel (EN12642-XL), yaklaşık 1.200 mm yüksekliğinde - Ön bağlantı barasında sarı-kırmızı hava bağlantıları - Ön panelde yuvalarında 4 adet takoz - Merkez taşıyıcı arka kısmında yaklaşık 1.000 mm'lik yan destekler için raf - Kaz boynu ve arka sacda sağda ve solda uyarı tablaları için yuva ve prizler - Yanlarda ve römork arkasında AB yönetmeliklerine uygun sarı reflektör bantı - Yükleme alanı dış çerçevesinde yaklaşık 100 x 50 mm 10 çift yan destek yuvası - Römork arka kısmında Avrupa tipi reflektör plakaları (kırmızı-sarı) - Römork arka kısmında döner uyarı lamba yuvası - Römork arka kısmında bir çamurluk - Kullanım kılavuzu ve açıklama USB bellekte - Arka ve yanlarda 80 km/h hız etiketi - Elektro-hidrolik ünite - Takviye ile arka travers üzerine monte edilmiş 1 manevra bağlantısı - Aks yükünü belirlemek için yük manometresi, yük diyagramı dahil - BEKAMAX (Pico) merkezi yağlama sistemi, NLGI-2 normal gres ve pompa çevresinde çıkarılabilir koruma - Ön ve arka kısımdan, kablolu uzaktan kumanda ile yönlendirme; aksların tek izli kontrolü (çekiciye entegrasyon yapılmadan) - Yaklaşık 100 x 50 mm ve yaklaşık 1.000 mm yüksekliğinde 7 çift galvanizli yan destek - Yükleme alanına enlemesine monte edilmiş 4 çift yan destek rayı, yaklaşık 100 x 50 mm ölçülerinde yan destekler için - Elektro-hidrolik ünite ve/veya elektrikli vinç beslemesi için spiral kablo (yaklaşık 35 mm², yaklaşık 3,5 m uzunluğunda, max. 250A), çekici ve römork arasında NATO-NATO bağlantılı - Yükselme merdiveni Fodpfx Apezhd Niebjpl

Durum: ikinci el, boş ağırlık: 9.600 kg, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 12/2011, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 205/65R17.5, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lift/lower function, 3rd and 4th axles with self-steering, ABS (anti-lock braking system), extendable, lashing eyes, loading ramps attachable, front and rear supports, side aluminum underrun protection, storage box. Fpodpfsxxkqzsx Apbsl Body: 4-axle low-loader trailer with attachable loading ramps, SAF axles, 3rd and 4th axles with self-steering, 13 pairs of lashing rings, 10 pairs of preparations for insertable stakes, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm low-bed height, low-bed length retracted approx. 9,500 mm, TÜV (MOT) due, aluminum ramps available at an extra charge of EUR 1,500. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale and errors excepted.

Durum: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Axles: Fpsdpfx Aeg Sk Trspbsl SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Durum: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Fpjdpeg Sk Tvefx Apbjl Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin Fsdpfx Apjzahp Ssbjpl * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm Fpjdpfxjyvnd Ne Apbel * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included * 1st axle with automatic lift axle function and start-up a...

Durum: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website. Excerpt from the Equipment List. Complete equipment details available upon request. Loading Platform: - Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length - Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) - 1 pair of lashing rings, foldable to the outside (LC 10,000 daN) - 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Tyres: - 245/70 R 17.5 3PMSF tyres - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system per ECE R 141 - Data transfer to the tractor via standardized EBS interface (ISO 11992) - The tractor must be capable of transmitting and displaying these data for correct indication Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: - Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO: - 24N ISO-1185 - 24S ISO-3731 Fodpfx Apjxarl Nebopl - 15-pin ISO-12098 Steel Structure: - Made from high-strength fine-grained steels - Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Coating: - Complete steel frame automatically shot-blasted after welding - Second blasting treatment with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection - Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not available - Paint build-up tested in salt spray fog test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included) - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams - Without container locks

Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Fpjdpoy Uwu Iofx Apbjl Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydromechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Durum: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring - 3 pairs of lashing rings Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading platform with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm hardwood flooring, over the axles with checker plate surface Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering axle - Air suspension with lift and lower valve - Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized connection rail at the front - 4 chocks with holders on the headboard - Mounting at the rear of the gooseneck for ALU drive-on ramps - 3 height levels of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized headboard with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall - 3 pairs of sliding stakes in the loading platform - Body rear left and right hydraulically extendable by approx. 750 mm - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm - Upper edge of structure approx. 3,960 mm high - Driving with open sliding roof is not permitted and will cause damage to the curtain - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic unit at the rear, beneath the loading platform - At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket - Control valves for the ramps positioned on the right trailer side - 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform - Lift axle at the front axle - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles - On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance - Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump - Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light - Load pressure gauge for determining axle loads including load chart Fedpfx Apstvfkfjbopl - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches Fjdpfx Ajya E A Nopbepl - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Durum: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Gooseneck * Gooseneck in SNT design for optimized deck length * Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Tanker deck * Low bed designed as extendable tanker deck in SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are protected in extendable beams and automatically adjust to the respective low bed length Rear running gear * In short version with closed outer frame and checker plate cover * Running gear with excavator trough, this is closed in the rear section to house air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Braking system * Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit Paintwork * 6-coat treatment * Complete steel structure shot-blasted after welding Fodpfx Aov Sw E Ajpbepl * 1 layer zinc-based primer * 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver-grey * Sidewall color: Natural Aluminum Accessories included * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading area, provisions for removable load floor * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN) * Cutouts in the upper chord of the outer beams above the lashing rings * Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers * Outer beams of the low bed coated with anti-slip sand layer * 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Chamfered front and rear a

Durum: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: Fpsdpfexf Silex Apbsl - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Fpsdsw Tgp Djpfx Apbsl Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle