Kullanılmış Faymonville Max Trailer Max510 Tiefbett 2X12 T Pa satın al (60.598)

Durum: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Gooseneck * Gooseneck in SNT design for optimized deck length * Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Tanker deck * Low bed designed as extendable tanker deck in SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are protected in extendable beams and automatically adjust to the respective low bed length Rear running gear * In short version with closed outer frame and checker plate cover * Running gear with excavator trough, this is closed in the rear section to house air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Gsdpfjv Sw E Aox Anzjuf Braking system * Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit Paintwork * 6-coat treatment * Complete steel structure shot-blasted after welding * 1 layer zinc-based primer * 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver-grey * Sidewall color: Natural Aluminum Accessories included * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading area, provisions for removable load floor * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN) * Cutouts in the upper chord of the outer beams above the lashing rings * Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers * Outer beams of the low bed coated with anti-slip sand layer * 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Chamfered front and rear a

Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: Guodsw Tpq Depfx Anzof - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durum: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° Gujdpjyvnfgjfx Anzof * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) Gusdeyhkrrspfx Anzsf * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durum: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red Gusdju Sd U Uspfx Anzsf * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Durum: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: * Cargo area fitted with approx. 30 mm thick hardwood flooring * 10 pairs of folding lashing rings (LC 10,000 daN) Landing Legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out. Axles and Suspension: * BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169 K Electrical System: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking System: * Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel Structure: * Structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal coating adhesion * Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver grey * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Including Accessories: * Cargo area with approx. 30 mm thick hardwood flooring * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket * Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit) * Electro-hydraulic power unit * 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area * Load gauge for axle load determination including load chart Godpfxexttc Ao Anzouf * Lift axle on the front axle with control by TEBS E * 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm * One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction) * One shunting coupling with reinforcement attached to the rear crossmember * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Durum: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457 Specifications: Model year: 2012 3 axles Guedpfx Aezqlx Rsnzsf Length: 1325 cm Net weight: 12,178 kg Gross vehicle weight: 59,000 kg 12-ton axles Steerable on all axles Ready for delivery Description: 2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension. The extension measures 14 meters. Ready for delivery. TÜV: Yes EU-approved until: 28.02.2027 Own weight: 12,178 Total weight: 59,000 Model: Telemax flatbed semi-trailer with 27-meter extension = Further information = Please contact ATS Norway for more information.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, Üretim yılı: 2022, Faymonville 2-axle low bed trailer MEGAMAX 2x12 t PA 2 steered axles Single telescopic, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technical extension (telescopic): approx. 4,700 mm Fifth wheel height (laden): approx. 1,205 mm Loading height (max. laden): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm Fifth wheel offset: approx. 1,200 mm Swing clearance radius tractor unit (rear): approx. 2,300 mm Swing clearance radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - SNT-designed gooseneck for optimized loading area length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable Guedpfx Ajy Hxd Ionzef - Technical fifth wheel load: 25,000 kg Bridge: - Extra-low 'SUPER LOW' design as an extendable vessel bridge - Length approx. 6,850 mm, with mechanical locking Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at rear - PENDLE-AXLE, all axles hydro-mechanically forced steered - Hose rupture valve on axle compensation cylinder with automated RESET function - Hydraulic cylinder with shut-off cocks and safety plugs for securing in raised position - Technical axle load: 12,000 kg each - Hydraulic axle compensation Brake system: - WABCO braking system, EBS-E in accordance with regulations Chassis tyres: - 245/70 R 17.5 3PMS Metallisation: - Complete HRM metallisation (High Resistance Metallisation) - Complete steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Coating: - 6-coat finish - Complete steel construction shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final painting with 2 layers of 2-pack paint (acrylic), single colour, then cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver grey - Drop side colour: Natural aluminium Steel construction: - Steel construction made from high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690Q/S700MC (yield strength 690 MPa) - MAG welding process according to EN ISO 4063

Durum: ikinci el, toplam ağırlık: 44.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, Unladen weight: 11,800 kg Overall length: 12,000 mm Extendable forwards for front loading of the coupled flatbed bridge - Gooseneck in compact design - Length x width: 3,900 x 2,480 mm - Interchangeable 2" king pin - Integrated hydromechanical steering - Hydraulic lift and lowering function, including support cylinders - Designed for a technical fifth-wheel load of up to 24 t - 4-sided aluminium drop sides - Steering angle: 2,200 mm Guodsy U Df Hepfx Anzof Flatbed bridge - Low-bed with external tubes - Flatbed length: 6,750 mm, extendable by 5,500 mm to a total of 12,250 mm - Flatbed width: 2,550 mm - Construction height: 200 mm - Loaded deck height approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Front coupling hooks for connection to the gooseneck 2-axle chassis - Chassis in compact design - Air-suspended chassis (L x W) approx. 2,750 x 2,550 mm incl. lift and lower valve, with 2 forced-steered axles, manufacturer BPW, wheelbase 1,330 mm - Chassis with centre trough Braking system - Dual-line all-wheel pneumatic brake system - Progressive central lubrication system - Radio remote control - Coupling height loaded: 1,250 mm - Both axles hydraulically forced-steered

Durum: yeni, azami yük ağırlığı: 34.104 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Further information here: Gsdpfov D Abgjx Anzeuf

Durum: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Complete specifications available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle), removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front chamfer approx. 60° * Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Detachable steel front wall, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel mount inside on the front wall of the gooseneck with bracket * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN) * On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish * On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish * 3.5 inch kingpin * TPMS tyre pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) Guedpfx Aneyhkqnjzof * 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING DECK: * Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams * One locking position approx. every 500 mm in the extension * 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN) * 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN) * Folding extensions, approx. 230 mm per side (WITHOUT wooden planks) * Extension planks, loose, framed in steel * Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN) * 2 pairs of screw rings M24 (LC 8,000 daN) included REAR RUNNING GEAR: * Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position * Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit * 4 pairs

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2012, Donanım: ABS, = Additional options and accessories = - Drum brakes = Notes = Chassis Gujdpfxex U D Alo Anzef Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 900 cm Loading platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further information = Axle configuration Tyre size: 245/70 R17.5 Axle make: SAF Brakes: drum brakes Suspension: air suspension Front axle: twin tyres; left inner tread depth: 40%; right inner tread depth: 25% Center axle: twin tyres; left inner tread depth: 50%; right inner tread depth: 40% Rear axle: twin tyres; left inner tread depth: 15%; right inner tread depth: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydromechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun Gusdpfxey Uwu Ie Anzof * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Durum: ikinci el, makine/araç numarası: YAMT14XX5K0104637, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2020, toplam uzunluk: 14.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2020, Chassis Chassis height: 90 cm King pin / fifth wheel diameter: 2 inch Structure Turntable height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Axle length: 90 cm Load floor length: 930 cm Ramp length: 405 cm Gooseneck length: 430 cm Maximum width: 305 cm (20 cm + 20 cm) Maximum length: 930 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: Saf Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; lift axle; left outer tyre tread: 15%; right outer tyre tread: 80% Axle 2: Twin tyres; left outer tyre tread: 60%; right outer tyre tread: 50% Axle 3: Twin tyres; steered; left outer tyre tread: 70%; right outer tyre tread: 70% Axle 4: Twin tyres; steered; left outer tyre tread: 75%; right outer tyre tread: 65% Weights Unladen weight: 11,480 kg Payload: 49,320 kg Gross vehicle weight: 60,800 kg Functional Body brand: Faymonville Loading platform height: 90 cm Identification Registration number: C525073 = Company Information = Gjdpfx Anju H D Taozouf For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, makine/araç numarası: YAFTL408100008968, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2008, toplam uzunluk: 13.400 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.400 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2008, = Additional Options and Equipment = - Steering axle - Drum brakes = Notes = Chassis Coupling pin / fifth wheel diameter: 2 inches Coupling pin / drawbar height: 120 cm Drum brake: ✓ Structure Year of manufacture: 2008 = Further Information = Axle Configuration Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Tyre size: 245/70 R17.5; Left tyre tread: 60%; Right tyre tread: 35% Middle axle: Tyre size: 245/70 R22.5; Left tyre tread: 25%; Right tyre tread: 50% Rear axle 1: Tyre size: 245/70 R17.5; Steering; Left tyre tread: 45%; Right tyre tread: 20% Rear axle 2: Tyre size: 245/70 R17.5; Steering; Left tyre tread: 50%; Right tyre tread: 60% Weights Unladen weight: 17,500 kg Payload: 47,500 kg Gross vehicle weight: 65,000 kg Functional Body make: Faymonville = Company Information = For more information on this unit please call: or e-mail: . Gedpfxsxhgirj Anzouf A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, Üretim yılı: 2010, MEGA veya DÜŞÜK YÜKLEME RÖMORKU için İYİ DURUMDA GOODYEAR LASTİKLER. = Daha fazla bilgi = Gedpfxexvx Iij Anzjuf Üretim yılı: Kasım 2010

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Kuğu boynu: •Yaklaşık 750 mm x 10°'lik arka eğime sahip kuğu boynu •3 çift bağlama halkası (LC 5.000 daN) •30 mm kalınlığında sert ahşap kaplama Çekilebilir tasarımlı yük platformu: •Yaklaşık 1.000 mm x 8°'lik arka eğime sahip çekilebilir tasarımlı yük platformu •Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) •Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) •Yük platformunun ön tarafında yatar pozisyonda 1 çift bağlama halkası (LC 10.000 daN) •Gergi bantlarının takılması için yük platformunun dış çerçevesindeki boşluklar (LC 2.000 daN) •Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Akslar ve lastikler: •BPW akslar, hidro-mekanik olarak zorunlu olarak yönlendirilir •Teknik aks yükü: 12.000 kg •Kaldırma ve indirme valfli hava süspansiyonu •ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi •Lastikler 235/75 R17.5 3PMSF Boya: •Kaynak yapıldıktan sonra tüm çelik yapı, kum püskürtme makinesiyle otomatik olarak temizlenir •Kaplama sisteminin optimum yapışması için ikinci kum püskürtme işlemi korundum ile yapılır •En iyi korozyon korumasını sağlamak için tüm araç şasisinin HRM metalizasyonu ZINACOR 850 (85% çinko / 15% alüminyum) ile yapılır •Son kat boya, 2 kat 2K üst kat boya ile tek renk olarak DB 7350 Novagrau renginde uygulanır •Arka kısım metalize edilerek RAL 9010 (Saf Beyaz) renginde boyanır •Boya kaplaması, ISO 9227-NSS'ye göre tuzlu su püskürtme testinde test edilir •Boşlukların özel balmumu ile yalıtılması Gjdpezr Egdefx Anzsuf Elektrik sistemi: •AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) •Tüm yan işaret lambaları, sinyal lambası ile birlikte yanıp söner •Ön bağlantı şeridindeki ASPÖCK-UNIBOX, 24N, 24S ve 15 pinli prizlerle donatılmıştır Pakete dahil olan aksesuarlar: •2" Kral mandalı •Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar •Ön galvanizli bağlantı şeridinde sarı-kırmızı hava bağlantı elemanları •Ön duvara monte edilmiş 2 adet fren pabucu •Ön duvarın önünde bir adet yedek tekerlek ve tutucu •Elektro-hidrolik güç ünitesi •Önden ve arkadan, kablolu uzaktan kumanda ile basınç düğmeleri aracılığıyla çalıştırılabilen yardımcı direksiyon, aksların tek şerit kontrolü ile •Römorkun arkasında Avrupa reflektör tabelaları (Kırmızı-Sarı) •AB yönetmeliklerine uygun beyaz reflektör bandı, yanlarda ve çekilebilir kısımda, arkada kırmızı •Kuğu boynunda ve arka kısımda, sol ve sağ tarafta uyarı panoları için birer tutucu, priz dahil •Aracın arkasındaki ALU rampalar için kaydırılabilir bağlantı şeridi •Yük platformunun eğiminin altında galvanizli katlanır destekler •Römorkun arkasında bir çamurluk •Kullanım kılavuzu ve açıklama •BEKAMAX (Pico) merkezi yağlama sistemi, normal yağ NLGI-2 ile ve pompanın etrafındaki çıkarılabilir koruma ile •Kuğu boynunda, takılabilir ALU yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm •Arka galvanizli bağlantı elemanları çıkarılabilir (yapının uzunluğu yaklaşık 2.560 mm) •Yük platformunda 3 çift WADER konteyner cepleri, 1x 20 ft, 1x 30 ft veya 1x 40 ft konteyner için •Yük platformunun dış çerçevesinde 100 x 50 mm boyutlarında bağlantı elemanları için 6 çift cep •Sürüş yönünde sağ tarafta, yük platformunun altında INOX 1.500 x 390 x 810 boyutlarında bir alet kutusu •Yaklaşık 400 mm uzatılabilen dört uyarı panosu, yaklaşık 423 x 423 mm boyutlarında, bir konumlandırma lambası ile •Kablolu uzaktan kumandaya ek olarak, tek şerit kontrolü için alıcıda kontrol lambaları bulunan, radyo uzaktan kumandası •Kuğu

Durum: ikinci el, boş ağırlık: 11.880 kg, azami yük ağırlığı: 49.920 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2026, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Kuğu boynu: -Yaklaşık 750 mm x 10°'lik arka eğime sahip kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) -30 mm kalınlığında sert ahşap kaplama Yükleme alanı: -Yaklaşık 1.000 mm x 8°'lik arka eğime sahip, çekilebilir yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Gerdirme bantlarının takılması için yükleme alanının dış çerçevesindeki boşluklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Rampalar: -Yaklaşık 2.750 + 1.400 x 800 mm ölçülerinde, yaklaşık 48 mm kalınlığında sert ahşap kaplamalı, galvanizli iki parçalı çelik rampalar -Hidrolik olarak yukarı ve aşağı hareket ettirilebilen rampa parçalarına, hidrolik kaldırma mekanizmasına ve hidrolik olarak hareket ettirilebilen bir rampaya sahip -Çift başına maksimum yük: 40.000 kg Dorse destek ayakları: -24 ton kaldırma kapasitesine (50 ton test yükü) sahip 2 vitesli şanzımanlı JOST dorse destek ayakları (mekanik) Godpezp Ntvjfx Anzeuf Akslar ve lastikler: -BPW akslar, iki sabit aks, iki takip eden dönen aks -Hava süspansiyonlu, tamburlu frenli, kaldırma/indirme fonksiyonlu -Takip eden dönen akslar, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Lastikler 235/75 R17.5 Boya: -Kaplama sisteminin optimum yapışması için korund ile yapılan yüzey hazırlığı -Tüm araç şasisinin ZINACOR 850 (85% çinko/15% alüminyum) ile HRM metalizasyonu -2 kat 2K üst kat boya ile son kat boyama, tek renk DB 7350 Novagrau Standart olarak dahil olan aksesuarlar: -Kuğu boynunda ve arkada, sol ve sağ tarafta, uyarı levhaları için birer adet tutucu, priz dahil -Tutucu ile birlikte bir yedek lastik -2" Kral pim -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön panel -Ön taraftaki galvanizli bağlantı şeridinde, sarı-kırmızı hava bağlantı elemanları -4 adet takoz ve tutucu -Yükleme alanının eğiminin altında galvanizli katlanır destek ayakları -Dorrenin arkasında, etrafı aydınlatan bir lamba için bir tutucu -Rampalar ve yükleme alanı arasındaki boşluğu kapatmak için kapak levhaları -AB yönetmeliklerine uygun olarak yanlarda ve açılır kısımda beyaz reflektör şerit, arkada kırmızı -Arka tarafta, yükleme alanının altında elektro-hidrolik ünite -Rampalar için kontrol vanaları, dorse sağ tarafında -Arka tarafta çamurluk -Avrupa reflektör levhaları (kırmızı-sarı), dorse arka tarafında -USB çubuğunda kullanım kılavuzu ve açıklama -Yaklaşık 400 mm açılabilen dört adet uyarı levhası, yaklaşık 423 x 423 mm boyutlarında, bir konum lambası ile -Kuğu boynunda, takılabilir ALU yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm -Arka, galvanizli takılabilir çerçeveler çıkarılabilir (yapının uzunluğu yaklaşık 2.560 mm) -Yükleme alanında, 1x 20ft, 2x 20ft veya 1x 40ft konteyner için 4 çift WADER konteyner cebi -Yükleme alanının dış çerçevesinde 100 x 50 mm takılabilir çerçeveler için 7 çift çerçeve cebi -Galvanizli, her iki tarafta yaklaşık 230 mm açılabilen genişletmeler -Ön aks üzerinde, mevcut aks yüküne ve mevcut yükleme durumuna bağlı olarak TEBS-E tarafından kontrol edilen kaldırılabilir aks -Yükleme alanının eğiminin dış çerçevesinde, her 200 mm'de 20 x 20 mm kare tırmanma çıtaları -Kuğu boynundaki ve yükleme alanındaki tırtıklı saclarda, kaymayı önlemek için yüzeye entegre edilmiş bir kum tabakası -BEKAMAX

Durum: ikinci el, Üretim yılı: 2018, Faymonville Maxtrailer F-S43-1AAF. Yıl: 2018. 9 tonluk SAF akslar. Ağırlık: 9961 kg. Maksimum ağırlık: 45.000 kg. Çekme çubuğu yükü: 18.000 kg. Hidrolik direksiyonlu 3 direksiyonlu aks. 7,5 metre uzatılabilir. Hava süspansiyonu. RVS alet kutuları. Radyo ile uzaktan kumanda. 1. aks kaldırılabilir aks. EBA ABS ALB. Platform ölçüleri: Uzunluk: 13.550 mm. Genişlik: 2480 mm. Yükseklik: 1400 mm. Yükseklik: Alüminyum paneller: 600 mm. Lastikler: 385/65R22,5 %70. ID No: 513. Heinhuis'in Genel Hüküm ve Koşulları, Heinhuis tarafından yapılan tüm ilanlar, teklifler ve fiyat teklifleri, Heinhuis tarafından yapılan tüm sözleşmeler ve bunlara öncülük eden müzakereler için geçerlidir. Herhangi bir şekilde verilen yanıtla, Heinhuis'in Genel Hüküm ve Koşullarının geçerliliğini kabul etmiş olursunuz ve bu Genel Hüküm ve Koşullarının içeriğini okuduğunuzu beyan edersiniz. Fiyatlarımız ihracat için geçerli net fiyatlardır. = Ek Bilgiler = Gujdpfxezn Nf No Anzjf Üretim yılı: 2018 Boş ağırlık: 9.961 kg Taşıma kapasitesi: 35.039 kg Toplam ağırlık: 45.000 kg Uzatılabilir yapı: Evet = Şirket Bilgileri = Daha fazla bilgi için:

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container Gedsyxc Eyopfx Anzeuf - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2023, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 2023, Rear axle 1: Dual tires; tire tread left inner: 70%; tire tread left outer: 70%; tire tread right inner: 70%; tire tread right outer: 70% Rear axle 2: Dual tires; tire tread left inner: 50%; tire tread left outer: 50%; tire tread right inner: 50%; tire tread right outer: 50% Rear axle 3: Dual tires; steered; tire tread left inner: 80%; tire tread left outer: 80%; tire tread right inner: 80%; tire tread right outer: 80% Unladen weight: 9,728 kg Payload: 39,772 kg Gross Vehicle Weight (GVW): 45,000 kg Registration number: 018502 Total length: 1,260 cm Extendable: 450 cm Bed: 840 cm Gujdozbaq Rjpfx Anzof

Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin Guodowvzg Rjpfx Anzjf - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)

Durum: ikinci el, makine/araç numarası: YAMT23XX6H0102167, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, Üretim yılı: 2017, = Diğer seçenekler ve donanım = - Arka hava süspansiyonu - Ön hava süspansiyonu = Diğer bilgiler = Ağırlıklar Yük kapasitesi: 42.000 kg Azami toplam ağırlık: 8.150 kg Durum Genel durum: ortalama Teknik durum: ortalama Görsel durum: ortalama Diğer bilgiler Ön lastik durumu: %30 Arka lastik durumu: %30 Gjdpjzd Rpbofx Anzsuf Ön lastikler: 385/65 R 22.5 Arka lastikler: 385/65 R 22.5 Son muayene: 2026-06-10 Diğer bilgiler Daha fazla bilgi için Lastas Sales ile iletişime geçin.

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2019, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, dingil mesafesi: 10.160 mm, renk: kırmızı, Üretim yılı: 2019, Donanım: ABS, 1 x kaldırma aksı 3 x yönlendirme aksı. Radyo uzaktan kumandalı yönlendirme. Hidrolik rampa. Kamera. = Daha fazla bilgi = Aks konfigürasyonu Lastik ölçüsü: 245/70R17.5 Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Çift tekerlekli; Sol iç lastik diş derinliği: %50; Sol dış lastik diş derinliği: %50; Sağ iç lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %50 Arka aks 2: Çift tekerlekli; Yönlendirmeli; Sol iç lastik diş derinliği: %30; Sol dış lastik diş derinliği: %30; Sağ iç lastik diş derinliği: %30; Sağ dış lastik diş derinliği: %30 Arka aks 3: Çift tekerlekli; Yönlendirmeli; Sol iç lastik diş derinliği: %40; Sol dış lastik diş derinliği: %40; Sağ iç lastik diş derinliği: %40; Sağ dış lastik diş derinliği: %40 Arka aks 4: Çift tekerlekli; Yönlendirmeli; Sol iç lastik diş derinliği: %60; Sol dış lastik diş derinliği: %60; Sağ iç lastik diş derinliği: %60; Sağ dış lastik diş derinliği: %60 Ağırlıklar Boş ağırlık: 11.344 kg Taşıma kapasitesi: 54.656 kg Azami toplam ağırlık: 66.000 kg Gsdpfszcuxrsx Anzsuf Bakım Muayene (APK): 02.2027'ye kadar geçerli Finansal Bilgiler Fiyat: Talep üzerine Kimlik Tip numarası: N/A F-S44 / YÖNLENDİRME AKSI - KALDIRMA = Firma Bilgileri = TÜM FİYATLAR İHRACAT İÇİN NETTİR. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Rusça da konuşuyoruz. Bilgiler doğru olarak hazırlanmış olup, ilandan doğabilecek herhangi bir hak iddia edilemez.

Durum: yeni, boş ağırlık: 12.000 kg, azami yük ağırlığı: 54.000 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear tapering approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear tapering approx. 1,000 mm x 8° - 5 pairs of foldable lashing rings (LC 5,000 daN) - 3 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the outer frame of the platform for anchoring straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles checker plate Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Brake system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-strength fine-grained steel Axles and tires: - BPW axles and suspension, first axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle toolbox - TPMS tire pressure monitoring system according to ECE R 141 - Tires 245/70 R 17.5 3PMSF Included accessories: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - At the front galvanized connection strip, yellow-red air couplings - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear steering, controllable from front and rear via cable remote control (push button), with axle alignment monitoring - European reflective plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and extension, red at the rear - Bracket for warning signs on left and right of the gooseneck and at the rear, with socket included - Galvanized, extendable side extensions approx. 230 mm per side - Bracket for a revolving beacon at the rear of the trailer - Galvanized drop down supports under the angled part of the loading platform - One mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable guard around the pump - ALU plug-in sideboards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck - Note: The box covers the oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container Gedpfx Aoykpbksnzeuf - 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of loading platform - Sliding plug-in rail for ALU drive-on ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area bevel - Lift axle on the front axle with control by TEBS-E in accordance with current axle load and loading condition - Four warning panels, approx. 400 mm extendable, size approx. 423 x 423 mm, equipped with position lamps - Bracket for revolving beacon on the warning panels - Wireless remote for rear steering, in addition to cable remote, with indicator lights on the receiver for axle alignment monitoring - Painted sand coating on the checker plate sections of the gooseneck and platform as anti-slip protection - 80 km/h speed limit sticker at rear and on both sides - Load gauge for determining axle loads, including load diagram