Kullanılmış Tracon Trailers Tos 1.5-6.6 Semi Dieplader satın al (31.810)

Durum: ikinci el, boş ağırlık: 10.350 kg, azami yük ağırlığı: 37.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: turuncu, Üretim yılı: 2018, işletme ağırlığı: 10.350 kg, Donanım: ABS,

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WGOTHPE4560028329, toplam ağırlık: 102.000 kg, süspansiyon: hidrolik, renk: sarı, Üretim yılı: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical data according to original TÜV inspection report: - Maximum speed: 80 km/h - Fifth wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Total trailer weight: 102,000 kg (with 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: Knodpfxowzl Nme Aglsa GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Max. fifth wheel load: 30,000 kg - King pin: 3.5" - Configuration for direct mounting of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED DECK - Payload: 67.75 t - Extendable from 6,000 to 14,000 mm - Central tube fixed to rear 4-axle bogie - Claw coupling at the front - Central tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded deck height: 650 mm (ground clearance 210 mm) - Adjustable width from 2,750 to 3,250 mm - Sliding tables (weight 405 kg) - Folding widening panels (weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height approx. 1,140 mm (+400/-200 mm) - Central lubrication Beka-Max Good condition - German vehicle from first owner - Immediately available from stock in Kirchheim unter Teck - Further details on request.

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 04/1995, toplam uzunluk: 15.780 mm, toplam genişlik: 2.490 mm, renk: diğer, Üretim yılı: 1995, R020359 = Further Information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 18,320 kg Payload: 26,680 kg gross vehicle weight (GVW): 45,000 kg Technical condition: very good Visual condition: very good Registration number: ZZ-77-21 = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights may be derived from the information provided. Office Phone: Mobile: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber.) Mobile: Dutch (Available on WhatsApp and Viber.) Kodpfx Agoymrdmjlona When paying by bank transfer, please transfer the funds to our bank account listed below. Always verify the payment details as stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Durum: ikinci el, ilk tescil: 04/2007, Üretim yılı: 2007, = Weitere Optionen und Zubehör = Knedpfjy Sxr Asx Agloa - 12-Volt-Steckdose = Weitere Informationen = Modelljahr: 2026 Leergewicht: 5.000 kg Nutzlast: 1.900 kg Zulässiges Gesamtgewicht: 6.900 kg Anzahl der Vorbesitzer: 1 Hersteller: Dani Autobedrijven B.V. Ootmarsumseweg 110, 7665SE ALBERGEN, Niederlande

Durum: ikinci el, boş ağırlık: 5.933 kg, azami yük ağırlığı: 29.067 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, Condition - Very well maintained vehicle from first owner Category - Semi-trailer Model - FLIEGL DHKA 350 - 35,000 kg Registration Month - 02 Registration Year - 2013 Gross Weight (kg) – 35,000 Tare Weight (kg) – 5,933 Payload (kg) – 29,067 Color - Silver Kodswk Ux Nopfx Aglsna Number of axles - 3 Maintenance - Inspection book Commercial/Export - Net price in € - 19,990 Subject to change, prior sale, and errors. Phone +49 551 50 84 912 According to the manufacturer: Axles and Suspension SAF disc brake axles with 370 mm disc diameter; air suspension with lift and lower function; 1st axle with automatic lift axle, including forced lowering and traction aid, operated via "3x brake" (traction aid operational up to axle load exceeding by 30% and up to a maximum speed of 25 km/h) Chassis Special lightweight steel welded construction; fifth wheel plate with replaceable 2" kingpin Landing Gear without Tyres/Rims 385 / 65 R 22.5" as per manufacturer’s choice; polished aluminium rims as per manufacturer’s choice Brake System Two-line pneumatic braking system according to EC regulations; EBS; 2 mistake-proof coupling heads; spring-loaded parking brake; without connecting cable Electrics 24 Volt, multi-chamber tail lights; 2 x 7-pin mistake-proof sockets; lighting according to EC regulations; no connecting cable Hydraulics Low-pressure cylinder max. 170 bar with HDK screw coupling; fixed section, NW 48mm (without hose connection) Tipping Body Aluminium floor made of high-quality, abrasion-resistant material, 5 mm thick, Brinell 110, reinforced with U-beams; side walls cleanly welded in hollow chamber profiles, with material-shedding top rail profile; front wall inclined, rear wall as swinging tailgate with "double-joint hinge", mounted externally with dual hook locking. Note! Only suitable for transporting sand, gravel, and round gravel with a maximum grain size of 20 mm! All other transport goods are excluded from warranty! Paintwork Chassis blasted, primed and finished with single-color 2K/HS acrylic paint in DB Nova Grey; body RAL 9010 Pure White with Revolution lettering Miscellaneous Folding underrun protection; wheel chocks with holders; 1/2 shell plastic mudguards; with Dekra inspection and report (according to §13 EC - FGV); contour marking with reflective tapes according to ECE R 048, side white and rear red; shovel and broom holder mounted externally on the front wall.

Durum: ikinci el, boş ağırlık: 12.450 kg, azami yük ağırlığı: 32.550 kg, toplam ağırlık: 45.000 kg, ilk tescil: 11/2008, yükleme alanı uzunluğu: 9.730 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, renk: turuncu, işletme ağırlığı: 12.450 kg, Very well-maintained vehicle from first owner: Meusburger MTS 3 - 45T Tri-axle low-loader trailer with drive-on ramp Heavy-duty transport Type: MTS 3 Gross vehicle weight: 45,000 kg Payload: 32,550 kg Length: 13,900 mm Knedpowb Sh Ajfx Agloa Width: 2,500 mm Air suspension

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.118 kg, azami yük ağırlığı: 31.882 kg, toplam ağırlık: 39.000 kg, ilk tescil: 04/2008, süspansiyon: hava, Üretim yılı: 2008, Donanım: ABS, MEGA treyler. Sürgülü brandası, Edscha, hidrolik kaldırma tavanı. İlgi duyarsanız lütfen arayın. Knodpow Nhpkjfx Aglja

Durum: yeni gibi (kullanılmış), Üretim yılı: 2023, Offer: We are pleased to offer you our Kögel Mega semi-trailer with high-lift roof. Purchase or rental – we make it possible! Kjdotxcvqepfx Aglena For further inquiries, please contact us by email. This vehicle is sold exclusively to commercial customers and is offered without warranty. The vehicle description serves solely for identification purposes. All information is provided without guarantee; modifications, errors, and prior sale are subject to change. No liability is accepted for typographical errors.

Durum: ikinci el, Üretim yılı: 2006, 2006 | Louault VF9 Steel Trailer | Tipper Semi-Trailer 📍Location: France 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8,500 or Make an Offer. Knsdpfxoyq H Tks Aglea Payment upon delivery available for a small fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points: 12 approved ✅ 2 minor issues ℹ️ 0 urgent repairs ⚠️ 📌 Inspector's Comment: We were unable to perform an on-road test, but all controls are up to date and the trailer appears to be well maintained. No leaks detected. Tires are in good condition. The floor, door, and cylinder are all in good shape. The body is constructed from steel. 📄 Want to see the full inspection report, additional photos, or a video? Tip: Use reference "40125 Equippo" to look up more details online. 💡 Why choose this machine and our service: ✔ Thorough inspection by professionals ✔ On-site delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking for other equipment? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Durum: ikinci el, Üretim yılı: 2001, 2001 | ROBUSTE KAISER S3302V Steel Tipping Trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6,500 or Make an Offer. Payment on delivery available for a nominal fee (subject to approval)* 👷‍♂️ Independently inspected by a professional 14 inspection points – 13 approved ✅ 1 imperfect ℹ️ 0 major issues ⚠️ 📌 Inspector’s Comment: Good overall condition for this steel trailer. 33-ton load capacity, equivalent to approximately 15-17m³. Drum brakes. Cylinders and axles appear to be in good order. There is a welded plate on the floor of the loading area, but it looks acceptable. Decent tyres for the trailer’s age. The superstructure is steel. 📄 Want to see the full inspection report, additional photos, or a video? Tip: Use reference "39983 Equippo" for more details online. 💡 Why choose this unit and our service? ✔ Thorough professional inspection ✔ Delivery to your jobsite available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer practical tools and resources for equipment owners and operators – all easily accessible on our platform. Knedpfx Ajyq H Tqjgloa

Durum: ikinci el, Üretim yılı: 2008, 2008 | ROBUSTE KAISER S3302A Steel Trailer | Tipper Semi-Trailer | 468,819 km 📍 Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6,500 or Make an Offer. Payment at delivery available for a modest fee (subject to approval)* Kodsyq Ibcjpfx Agljna 👷‍♂️ Inspected by an independent expert 14 inspection points: 12 approved ✅ 2 minor issues ℹ️ 0 faults ⚠️ 📌 Inspector's Comment: Well-maintained steel trailer. The front tires may need to be replaced soon. Stabilizers, connectors, door, and axles are all in good condition. Disc brakes, 33t load capacity or approximately 15-17 m³. The superstructure is made of steel. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "39982 Equippo" is commonly used for searching more details online. 💡 Why this machine and our service stand out: ✔ Comprehensive professional inspection ✔ Onsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer a range of helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Durum: ikinci el, Üretim yılı: 1999, 1999 | ROBUSTE KAISER S3302V Steel Trailer | Tipper Semi-Trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6,500 or Make an Offer. Payment on delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points: 10 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The trailer appears to be in acceptable condition; the two wheels were removed, but they will of course be mounted for transport. Overall condition looks good, the rear end has a few holes, but this does not directly affect usability. Stabilizers and cylinder are well greased. The body is made of steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39984 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stand out: ✔ Thorough professional inspection ✔ On-site delivery available Knjdpfx Agoyq Nchelea ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking for other equipment? We offer helpful tools and resources for all equipment owners and operators – conveniently accessible on our platform.

Durum: ikinci el, Üretim yılı: 2004, 2004 | Kögel S2T4S22E Aluminium Trailer | Tipper Semi-Trailer Knsdpfx Aeyq Ndxjglea 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8,500 or Make an Offer. Payment on delivery available for a nominal fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points approved ✅ 0 deficiencies ℹ️ 0 issues ⚠️ 📌 Inspector’s Comment: The trailer is in very good condition. No road tests were performed, but all checks and approvals are up to date. Axles, tires, and the entire bodywork are in excellent shape. No signs of distortion or leaks. The tarpaulin is also in good condition. The trailer is ready for operation. The body is made of aluminium. 📄 Want to see the full inspection report, additional photos, or a video? Tip: The reference "40126 Equippo" is commonly used for looking up more details online. 💡 Why choose this machine and our service: ✔ Comprehensive professional inspection ✔ Delivery to your jobsite available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking at other equipment options? We offer useful tools and resources for all equipment owners and operators – easily accessible through our platform.

Durum: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable Knsdpferq Dlfex Aglja - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Knsdpfxoxnnk Dj Aglja - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durum: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle Ksdpfexnym Dex Aglsna - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring Floor: - 35 mm larch wood floor with aluminum omega profiles Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Durum: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless Ksdpfowviwkjx Aglsna - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durum: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension Knjdpexgm S Defx Aglja - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer Knjdpfxjup U Hzo Aglea - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Knedpfx Agewu Agijlsa Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durum: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring - 3 pairs of lashing rings Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading platform with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm hardwood flooring, over the axles with checker plate surface Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering axle - Air suspension with lift and lower valve - Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized connection rail at the front - 4 chocks with holders on the headboard - Mounting at the rear of the gooseneck for ALU drive-on ramps - 3 height levels of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized headboard with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall - 3 pairs of sliding stakes in the loading platform - Body rear left and right hydraulically extendable by approx. 750 mm - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm - Upper edge of structure approx. 3,960 mm high - Driving with open sliding roof is not permitted and will cause damage to the curtain - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic unit at the rear, beneath the loading platform - At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket - Control valves for the ramps positioned on the right trailer side - 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform - Lift axle at the front axle - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles - On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance - Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump - Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light - Load pressure gauge for determining axle loads including load chart Kjdpotvfkfefx Agljna - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable Ksdpfewcmhajx Aglsna - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle trailing steer - Technical axle load: 12,000 kg - Electro-magnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: Kjdpfx Agou Hp Hrelona - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks - Galvanized folding supports under the chamfer of the loading area - One holder for a beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and the loading area - White reflective tape according to EU regulations on the sides of the trailer and red on the rear - Electro-hydraulic unit at the rear, under the loading area - Holder for warning signs left and right on the gooseneck and ramps, including socket - Control valves for the ramps located on the right side of the trailer - European reflective boards (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm - The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller - Bolted 5t ring for running the winch cable on the gooseneck without pulley - 2 pairs of WADER container pockets in the loading area for one 20ft container - 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN) - On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance - BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump - Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm - 80 km/h speed stickers at the rear and on both sides - Load gauge to determine axle loads, including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)

Durum: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: Knodpfx Aouadk Negloa - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Kjdpfxstphtme Aglsna Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart