İkinci El Faymonville Max Trailer 2-Achs-Tiefbett Mit Pendelachsen Satın Al (57.997)

Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high Tedpfxsh Hm The Ac Esc - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Durum: ikinci el, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2023, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R 17.5, renk: gri, Üretim yılı: 2023, Donanım: ABS, Kuğu boynu: -Yükleme alanının uzunluğunu optimize etmek için SNT tasarımında kullanılan kuğu boynu, yaklaşık 3.750 mm uzunluğunda -Kuğu boynu hidrolik olarak yukarı ve aşağı hareket ettirilebilir ve geri çekilebilir -Teknik çekme yükü: 23.000 kg -Çekici kamyonlar için: 4 x 2, 6 x 2 ve 6 x 4 Yükleme alanı: -Dış tarafta bulunan, uzatılabilir desteklerle birlikte alçak yatak -Sabit sert ahşap tabanlı alçak yatak -Besleme hatları, uzatılabilir desteklerin içinde güvenli bir şekilde bulunur ve otomatik olarak ilgili alçak yatağın uzunluğuna uyum sağlar -Dışa doğru katlanabilen 5 çift bağlama halkası -Vidalanabilir RUD halkalarının monte edilmesi için iç destek üzerinde 6 çift dişli blok Arka aks: -Kapalı dış çerçeve, tırtıklı sac kaplama ve sürekli prizmatik ekskavatör oluğu olan arka aks, yaklaşık 1.250/700 x 505 mm, arkadan açık -Dışa doğru katlanabilen 2 çift bağlama halkası -Oluk içinde yatay konumda bulunan 1 çift bağlama halkası -Takılabilir destekler için 2 çift destek cebi Salınımlı aks ve lastikler: -"SALINIMLI AKS", tüm akslar hidrome kanik olarak zorunlu olarak birbirine bağlanmıştır -Aks denge silindiri üzerindeki hortum kopması vanası, otomatik SIFIRLAMA fonksiyonu ile -Kaldırılmış konumda sabitlemek için musluklu ve ön adaptörlü hidrolik silindir -Aksların son kat boyası, DB7350 Novagrau renginde, 2 kat 2 bileşenli (2K) vernik ile tek renkte boyanmıştır -Hidrolik aks dengelemesi -Lastikler 245/70 R 17.5 – 3PMSF -Yük endeksi (146/146F) Fren sistemi: -AB yönetmeliklerine uygun fren sistemi, EBS-E (2S2M) ile Boya: -Standart olarak bilye ile püskürtülmüş kaynaklı şaside, üstün ve dayanıklı korozyon koruması, 2 bileşenli (2K) çinko tozu astar ile garanti edilir -Arka kısım metalize edilmiştir Elektrik sistemi: -AB yönetmeliklerine uygun elektrik sistemi -Ön bağlantı şeridi üzerindeki ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu soketlerle -ISO'ya uygun bağlantı -24N ISO-1185 -24S ISO-3731 -15 kutuplu ISO-12098 Ekipman (dahil): -Dış destekler üzerinde 1x 20 ft veya 1x 40 ft konteyner için vidalanabilir konteyner konumlandırma elemanlarının monte edilmesi için hazırlık -2" Kral pimi -Galvanizli çelik ön panel -Bir adet yedek lastik -Ön galvanizli bağlantı şeridi üzerinde hava bağlantı elemanları -2 adet takoz -Kablo uzaktan kumanda ile ön ve arka taraftan direksiyon, eksenlerin tek iz kontrolü ile, butonlar aracılığıyla kontrol edilebilir -Kuğu boynundan alçak yatağa hidrolik bağlantılar, vidalı bağlantı elemanları yerine çoklu bağlantı elemanı ile (sızdırmazlık için garanti verilmez) -Elektrikli-hidrolik ünite, AB yönetmeliklerine uygun sarı reflektör şeridi -2 adet ahşap blok 500x250x200 mm -Kuğu boynunda ve arka panelde, sol ve sağ tarafta uyarı işaretleri için, soket dahil, birer adet tutucu Tjdsz Hkxlspfx Ac Eoc -USB bellek üzerinde kullanım kılavuzu ve açıklama -6 çift dişli blok -Kuğu boynunda, takılabilir ALU yan paneller ve arka panel -Arka galvanizli takılabilir destekler çıkarılabilir -Kuğu boynunda INOX 1.350 x 400 x 400 mm alet kutusu -2 çift vidalanabilir M20 bağlama halkası -5 çift destek cebi -Katlanabilir genişletmeler -Alçak yatağın kaldırma kancalarının üzerine geçmek için 1 çift çelik rampa -Kaymayı önleyici bir tedbir olarak, yükleme alanında boyalı bir kum tabakası -Arka panel üzerinde monte edilmiş 2 adet geri vites lambası -Arka aksın kova sapı oluğu, takılabilir bir plaka ile kapatılmıştır -Uyarı işaretlerinde döner lamba için bir tutucu -Kablo uzaktan kumandaya ek olarak radyo uzaktan kumanda -2 pompalı BEKAMAX (Pico) merkezi yağl

Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover Tedpfshlz R Sox Ac Esc - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm Tjdpfx Ajxbmpljc Ejc * 2 pairs of foldable lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact front chassis: * Hook mounting front and rear, length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear chassis: * Mechanical bolt-eye coupling for mounting a low bed at the front * Rear end cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: * 8 x (M+S) 285/70 R19.5 as per manufacturer specification * Rear chassis tyres: * 16 x (M+S) 285/70 R19.5 as per manufacturer specification * Load index 150/148J Paintwork: * Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch king pin * Truck hydraulic connection with flow control (20 l/min) * Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works * BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-connection hydraulic couplers on the gooseneck * Front chassis with separate air connection for pneumatic tools * BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right at the rear of the front chassis for warning panels * Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2 * Socket on the rear chassis for the cable remote control of the rear steering * Rear chassis with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right * 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery * Remote control: * Operation of the powerpack, engine start/stop * Operation of the rear steering, in addition to the cable remot

Durum: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: > 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Tjdel Uxdkepfx Ac Ejc Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2007, süspansiyon: hava, Üretim yılı: 2007, Donanım: ABS, = Ek Seçenekler ve Aksesuarlar = - EBS - Kaldırma aksı - Hava süspansiyonu = Ek Bilgiler = Süspansiyon: Hava süspansiyonu Arka aks 1: Direksiyonlu Arka aks 2: Direksiyonlu Arka aks 3: Direksiyonlu Boş ağırlık: 12.940 kg Yük kapasitesi: 21.060 kg Toplam ağırlık: 34.000 kg Teknik durumu: iyi Görsel durumu: iyi Araç numarası: Düşük platformlu: 15 Faymonvill / 3 akslı, direksiyonlu, uzaktan kumandalı SAF / Uzatılabilir .: YA9TL35F02113453 SAF 3 x direksiyonlu aks, uzaktan kumandalı Boş ağırlık: 12490 Toplam ağırlık: 34000 Uzunluk: 9.20 m, uzatma ile 15.10 m + uzatma ile 20.40 m, toplam uzunluk 24.40 m Genişlik: m = Şirket Bilgileri = Baskı ve yazım hataları, değişiklikler, ön satış ve hatalar için sorumluluk kabul edilmez! Al Shogran GmbH An der Glashütte 15 Tsdpfx Acjzvzt Is Esc 41516 Grevenbroich Tel.: Mobil: Bayan Sabine Faust E-posta:

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tsdpfx Aotphtmec Eec Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck: - Hydraulic gooseneck, height-adjustable and detachable - Length approx. 3,650 mm - Numerous lashing points - For tractor units: 6x4 or 8x4 3-Axle Compact Front Bogie: - Hook mounts at the front and rear - Bogie length x width: approx. 3,560 mm x 2,850 mm - Numerous lashing points Excavator Deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width: approx. 7,150 mm x 2,850 mm - Beam height x width: approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of drop-forged lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings 5-Axle Rear Bogie: Tjdpfx Aswhywfoc Esc - Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back - Bogie length x width: approx. 6,840 mm x 2,850 mm - Numerous lashing points Pendulum Axles and Tires (Front and Rear Bogies): - "PENDEL-AXLE", all axles with hydromechanical forced steering - Hose rupture valve on equalizing cylinder with automatic reset - Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position - Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tires: 285/70 R19.5 Remote Steering: - Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring - Socket for operating the remote steering on the gooseneck - Cable remote control with push-buttons and axle tracking monitoring included Accessories Included: - Galvanized front connector bar with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks with brackets - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Gantry with winch for spare wheel on the front of the gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings - White reflective tape to EU specs on the sides and extensions, red at the rear - Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized - Gooseneck operating lever protected by a folding cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie - Variomax tool kit - Multi-couplings for hydraulics in the area of the lowbed hook mounts - Front bogie with separate air connection for pneumatic tools - Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings - Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel decks with approx. 12 mm thick rubber surface - Two INOX toolboxes 855 x 340 x 390 mm - Wireless remote control for remote steering in addition to cable control - Slip-resistant sanded surface coating - Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Durum: ikinci el, azami yük ağırlığı: 30.660 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2024, bir sonraki muayene (TÜV): 03/2025, Donanım: ABS, Web sitemizde hemen ve kısa sürede temin edilebilen tüm araçlarımızı bulabilirsiniz. Ekipman Özelliklerinden Bir Kesit: Tam ekipman talebiniz üzerine sunulmaktadır. Yük Platformu: * Çekilebilir merkez kirişli, alçaltılabilir platform * Yaklaşık uzunluk: 6.750 mm * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 1 çift bağlama halkası (LC 10.000 daN) * Yük platformunun arka kısmında yatay konumda bulunan 1 çift bağlama halkası (LC 10.000 daN) * Besleme hatları, merkez kiriş içinde güvenli bir şekilde yer alır ve ilgili alçaltılabilir platform uzunluğuna uyum sağlar. Kaz Boynu: * Yaklaşık uzunluk: 3.900 mm * Kaz boynu, hidrolik olarak yukarı/aşağı hareket ettirilebilir ve ayrılabilir. * Teknik çekme yükü: 23.000 kg Arka Dingil: * Kısa versiyon, kapalı dış çerçeve ve desenli sac kaplama ile * Ekskavatör kovası olan dingil, hava tanklarını almak için arka yarısında kapalıdır. * Dışa doğru katlanabilen 2 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 1 çift bağlama halkası (LC 10.000 daN) Dingiller: * BPW dingiller * Hidro-mekanik olarak zorunlu olarak yönlendirilir. * Teknik dingil yükü: 12.000 kg * Kaldırma ve indirme valfi ile hava süspansiyonu * Dingil aleti Lastikler: * 245/70 R 17.5 3PMSF ? Üretici firmamızın seçimi, yük indeksi (146/146F) Fren Sistemi: * AB düzenlemelerine uygun, EBS-E (2S2M) ile, çekiciye bağlantı hatları olmadan. Çelik Konstrüksiyon: * Yüksek mukavemetli ince taneli çeliklerden üretilmiştir. * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa), S690QL/S700MC (akma dayanımı 690 MPa) Boya: * Yüksek kaliteli 2 bileşenli (2K) boya * Tek renkli RAL 3002 kırmızısı renginde üst kat boya Aşağıdaki Ek Ekipmanlar Dahildir: * 2 inç König pim * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Ön duvarın önünde bir adet yedek lastik tutucu * Galvanizli bağlantı şeridinin önünde sarı-kırmızı hava bağlantı elemanları * 4 adet fren takozu tutucu ile. (± 5 kg) * Ön ve arka kısımda, kablo uzaktan kumandası üzerinden düğmelerle kontrol edilebilen, dingillerin tek şerit kontrolü olan (çekicide kurulum olmadan) direksiyon takviyesi. * Elektrik-hidrolik agregat (± 45 kg) * AB düzenlemelerine uygun olarak yanlarda, çekilebilir kısımda ve römorkun arkasında sarı reflektör şerit. * Yaklaşık 500x250x200 mm boyutlarında 1 adet ahşap blok. * Römorkun arka kısmında alüminyum rampalar için monte edilebilir şerit. * Römorkun arka kısmında döner lamba için bir tutucu. * Römorkun arka kısmında çamurluk. * Römorkun arka kısmında Avrupa reflektör levhaları (kırmızı-sarı). * Kaz boynunda ve arka sacın sol ve sağ tarafında, uyarı levhaları için tutucular ve priz. * USB bellek üzerinde kullanım kılavuzu ve açıklama. * Arka ve yanlarda 80 km/s hız etiketi. * Dingil yüklerini belirlemek için yük manometresi ve yük diyagramı. * Ek olarak: Kaz boynunda alüminyum yan paneller ve takılabilir arka panel, yaklaşık 2.440 x 400 mm (U x Y). * Arka galvanizli takılabilir çıtalar çıkarılabilir. (Gövde uzunluğu yaklaşık 2.560 mm). (± 46 kg) Tsdpfx Aozvt Tysc Ejc * Kaz boynunda ayrı bir hava bağlantısı ve hava tabancası. * Römork üzerinde, kaz boynu platformunun sol ve sağ tarafında bulunan şalterli 2 adet çalışma lambası. * Yük platformunun dış çerçevesinde yaklaşık 100 x 50 mm boyutlarında 6 çift çıta cebi. * Dingil çerçevesinin dış kısmında 2 çift (± 29 kg) * Her iki tarafta yaklaşık 230 mm çekilebilir, galvanizli genişletmeler (± 262 kg). * Kaz boynundan alçaltılabilir platforma hidrolik bağlantılar, vida b

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, Üretim yılı: 2022, Faymonville 2-axle low bed trailer MEGAMAX 2x12 t PA 2 steered axles Single telescopic, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technical extension (telescopic): approx. 4,700 mm Fifth wheel height (laden): approx. 1,205 mm Loading height (max. laden): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm Fifth wheel offset: approx. 1,200 mm Swing clearance radius tractor unit (rear): approx. 2,300 mm Swing clearance radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - SNT-designed gooseneck for optimized loading area length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 25,000 kg Bridge: - Extra-low 'SUPER LOW' design as an extendable vessel bridge - Length approx. 6,850 mm, with mechanical locking Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at rear - PENDLE-AXLE, all axles hydro-mechanically forced steered - Hose rupture valve on axle compensation cylinder with automated RESET function - Hydraulic cylinder with shut-off cocks and safety plugs for securing in raised position - Technical axle load: 12,000 kg each - Hydraulic axle compensation Brake system: - WABCO braking system, EBS-E in accordance with regulations Chassis tyres: - 245/70 R 17.5 3PMS Metallisation: - Complete HRM metallisation (High Resistance Metallisation) - Complete steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Coating: - 6-coat finish - Complete steel construction shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final painting with 2 layers of 2-pack paint (acrylic), single colour, then cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver grey - Drop side colour: Natural aluminium Steel construction: - Steel construction made from high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690Q/S700MC (yield strength 690 MPa) - MAG welding process according to EN ISO 4063 Tsdjy Hxd Iopfx Ac Eec

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, ilk tescil: 06/2017, toplam uzunluk: 7.000 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve aksesuarlar = Tsdpfxez Azd Tj Ac Eoc - 2 aks - Havalı süspansiyon = Diğer bilgiler = Lastik ölçüsü: 235/70 R17.5 Lastik profili: %75 Frenler: kampanalı frenler Arka aks 1: çift tekerlekli; Maksimum aks yükü: 10.500 kg Arka aks 2: çift tekerlekli; Maksimum aks yükü: 10.500 kg Azami toplam ağırlık: 21.000 kg Teknik durumu: çok iyi Görsel durumu: çok iyi Plaka: QALO590

Durum: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Tjdpoxf Siljfx Ac Eec Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform Tsdpjup U Hzjfx Ac Eoc - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, azami yük ağırlığı: 92.045 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Donanım Özelliklerinden Özet Tam donanım talebe bağlıdır. * 1 x MAX710-Hals-V-30-2.70 kuğu boynu * Kuğu boynu hidrolik olarak kaldırılabilir/alçaltılabilir ve ayrıca geri çekilebilir * Uzunluk yaklaşık 3.650 mm. SZM 6x4 veya 8x4 için * Çelik ön duvar, yaklaşık 400 mm yüksekliğinde * Kuğu boynuna takılabilen ALU yan paneller ve arka panel, yaklaşık 400 mm yüksekliğinde, eloksal kaplama * 3,5 inç King pin * Debı kontrol cihazlı kamyon hidrolik bağlantısı (20 l/dk) * Besleme hatlarını asmak için kancalar dahil * SZM tankı en az 80 litre kapasiteye sahip olmalı ve MAX römork bağlantı parçalarına sahip olmalıdır; aksi takdirde bağlantı parçaları müşteri tarafından sağlanmalıdır * BEKA-MAX merkezi yağlama sistemi, normal yağ NLGI-2 ile çalışan bir kuğu boynu için * TPMS lastik basıncı kontrol sistemi Todpfx Aozzhfnsc Ejc * İki adet INOX alet kutusu, yaklaşık 855 x 340 x 390 mm, kuğu boynunun sol ve sağ tarafında (± 48 kg) * 1 silindirli Hatz dizel motor (Silent Pack), elektrikli marş ve marş aküsü ile * Kuğu boynundaki güç ünitesi ve bağlantı plakası arasındaki hidrolik bağlantı hatları * Uzaktan kumanda: Güç ünitesinin çalıştırılması, dizel motorun başlatılması/durdurulması * Kablo uzaktan kumandanın yanı sıra destekli direksiyonun çalıştırılması * Alıcıda tek şerit kontrolü için 2 adet LED kontrol lambası * Kuğu boynunun kaldırılması/alçaltılması * Süspansiyon sisteminin kaldırılması/alçaltılması * Kuğu boynundaki çoklu bağlantı hidrolik bağlantıları * Kuğu boynunun arka plakasında, sol ve sağ tarafta, ayrı bir açma/kapama anahtarına sahip 1 adet LED çalışma projektörü * Yaklaşık 423 x 423 mm boyutlarında, LED konum lambası ve döner lamba tutucusu olan, ± 2.000 mm'ye kadar uzayabilen dört adet uyarı panosu. (± 122 kg) * 1 x 3 akslı kompakt ön aks * MAX710-Aks-PA-F-3-19.5-1.36-2.85 * Ön ve arka tarafta kanca bağlantısı * Uzunluk: yaklaşık 3.560 mm * Aks genişliği: yaklaşık 2.850 mm * Ön aks, hava kompresörü için ayrı bir hava bağlantısına sahip * Normal yağ NLGI-2 ile çalışan 3 akslı bir aks için BEKA-MAX merkezi yağlama sistemi. * Ön aksın sol ve sağ arka tarafında, uyarı panoları için bir adet 7 kutuplu priz * TPMS lastik basıncı kontrol sistemi, ECE R 1411'e uygun * Ön aksın arka tarafında, ayrı bir açma/kapama anahtarına sahip, sol ve sağ tarafta LED çalışma projektörü * Ön aks yüzeyi, kaymayı önlemek için tek kat boyalı kum kaplama ile kaplı * Ön aks üzerindeki çoklu bağlantı hidrolik bağlantıları. * 1 x damperli römork şasisi: MAX710-Düşük Yataklı-BB-A-7.15-(430)-2.85 * Üzerinden geçilebilen köprü kancaları ön tarafta ve cıvatalı flanş bağlantısı arka tarafta olan, teleskopik damperli römork şasisi BB-A * Taban genişliği: yaklaşık 2.850 mm, Uzunluk: yaklaşık 7.150 mm * Destek yüksekliği: yaklaşık 430 mm, Destek genişliği: yaklaşık 1.350 mm * Yaklaşık 580 mm yükseklikte, yaklaşık 150 mm yerden yükseklikte * Yaklaşık 1.000 mm, 1 çift yaklaşık 500 mm boyutlarında altı çift çelik mat ve kauçuk zemin (± 1.660 kg) * Damperli römork şasisinin dış borusunun üst kordunda, yaklaşık 500 mm aralıklarla, cıvata halkaları için (LC 16.000 daN) yaklaşık 40 mm çapında vida yuvası * Damperli römork şasisinin iç borusunda, cıvata halkalarının monte edilmesi için yaklaşık 1.000 - 1.200 mm aralıklarla M30 vida yuvası (LC 10.000 daN) * Katlanabilir genişletmeler, çelik matlarla, yaklaşık 2.850 mm'den yaklaşık 3.250 mm'ye kadar genişlikte ayarlanabilir * TPMS lastik basıncı kontrol sistemi * Kletterleisten'li, yaklaşık 1.200 x 450 x 50/400 mm boyutlarında, HeProLen plastik takoz

Durum: ikinci el, azami yük ağırlığı: 25.630 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 11/2026, Donanım: ABS,

Durum: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website. Excerpt from the Equipment List. Complete equipment details available upon request. Loading Platform: - Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length - Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) - 1 pair of lashing rings, foldable to the outside (LC 10,000 daN) - 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Tedsxarl Nepfx Ac Eoc Tyres: - 245/70 R 17.5 3PMSF tyres - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system per ECE R 141 - Data transfer to the tractor via standardized EBS interface (ISO 11992) - The tractor must be capable of transmitting and displaying these data for correct indication Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: - Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Structure: - Made from high-strength fine-grained steels - Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Coating: - Complete steel frame automatically shot-blasted after welding - Second blasting treatment with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection - Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not available - Paint build-up tested in salt spray fog test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included) - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams - Without container locks

Durum: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right Tsdpfxorq Dlfs Ac Esc - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 11.000 kg, azami yük ağırlığı: 20.000 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: hava, Üretim yılı: 2016, Düşük yataklı yarı römork CAMRO CN 26.20B / Tiefbett / Uzunluk 16 m Yıl 2016 Teknik Bilgiler Azami Toplam Ağırlık 31.000 kg Ağırlık 11.000 kg Yük kapasitesi 20.000 kg Ana platform uzunluğu 665 cm 405 cm uzatılabilir Arka platform uzunluğu 250 cm Ön platform uzunluğu 305 cm Genişlik 110 cm Römork her iki tarafta 70 cm genişleyebilir. Tjdpfxezxfyqe Ac Esc Havalı süspansiyon Yedek lastik için taşıyıcı 2 dingil Çok iyi durumda, tam belgeli.

Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions Todpfxsw Tgp Do Ac Ejc * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform Tedpfx Acst Ag Uwe Ejc - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: Tsdpfxsunrapo Ac Eoc - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps Tjdpjuqlmnefx Ac Eoc - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° Tjdpfel Sl Izox Ac Ejc 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: Tjdpfx Acswcmhae Esc - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Durum: yeni, boş ağırlık: 190 kg, azami yük ağırlığı: 560 kg, toplam ağırlık: 750 kg, yükleme alanı uzunluğu: 2.641 mm, yükleme alanı genişliği: 1.256 mm, yükleme alanı yüksekliği: 1.500 mm, lastik boyutu: 155/70 R13, Üretim yılı: 2024, işletme ağırlığı: 750 kg, 2-axle car trailer Garden Trailer 264/2 with accessories We offer you the largest light car trailer with a loading area of 264 x 125 cm, enabling you to transport very large volumes of cargo. The Garden Trailer 264 model is a trailer that will make all your transport tasks easier. Want to transport a large amount of wood? No problem! New household appliances, electronics, or furniture? Nothing could be easier! You can transport everything you need yourself, and loading and unloading are made easier by the tilting drawbar. Unitrailer Garden Trailer 264/2 TIPPING Car Trailer – Advantages and Technical Details - Very wide cargo area, making it easy to transport bulky goods - Complete zinc coating for corrosion protection - Above-average durability thanks to additional support beams under the floor and reinforced framework - Active marker lights make it easier to judge the trailer’s position when reversing - Highly durable, corrosion-resistant plastic mudguards - Rear lights protected against damage - Possibility to store the trailer vertically at the rear, minimizing space required during storage Todst Iblbepfx Ac Esc - Road wheels mounted to the sides of the loading platform lower the center of gravity, improve handling, and prevent trailer swaying – even when driving empty