Kullanılmış Faymonville 5-Achs-Doppeltele-Semi-Zwangsgelenkt satın al (43.212)

Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with a 1,000 mm x 6° taper - Suitable for tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform, approx. 9,700 mm in length, with hydraulically folding and lowering rear, as well as hydraulically raisable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering - 3rd axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electro-hydraulic auxiliary steering for the self-steering axle of a 3-axle assembly - Automatic control of the trailing steering axle during reversing via gyroscope sensor - Manual steering operation in forward and reverse via separate wireless remote control - Manual operation enabled up to 10 km/h - System powered by a separate electro-hydraulic unit Accessories Included: - Removable steel headboard, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every approx. 400 mm - Additional mounting hole at the rear upper section of the outer beams for a bolted lashing ring - Grating platform with 5 mm sheet metal reinforcement on gooseneck and rear taper Bodpfx Ajyw Sakeh Sswl - 2" kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) - 1 pair of removable, anodized ALU side walls on the gooseneck, approx. 400 mm high - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - Winch mounting located at the front inside the gooseneck - Continuous grating floor with 5 mm sheet base as additional reinforcement, rated for point load: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted anti-slip sand coating on the gooseneck’s cover plates, as well as in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, loadable in raised driving position: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cut-outs in the outer frame of the platform and the lift bed for attaching tension belts - Extensive lashing points - Hydraulic rear section can be lowered for loading/unloading and raised to reduce total train length - Loadable in driving operation in horizontal position: 10,000 kg - Reduction of overall train length when raised: 2,350 mm - Painted anti-slip sand coating on the entire ramp, except for the extendable galvanized ramp section - Hydraulically extendable rear extensions for loading/unloading - Wireless remote: - Operation of hydraulic lift bed - Operation of hydraulic lifting device for rear extension - Operation of hydraulic extension for rear extension - 1st axle with traction assist - Central lubrication system with 1 pump - 4 warning panels, approx. 423 x 423 mm, extendable

Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approximately 3,700 mm long; rear chamfer approx. 1,000 mm x 6° - Suitable for tractor units: 4 x 2 and 6 x 2 configurations Loading Platform: - Platform length approximately 9,700 mm with hydraulically folding rear section, and front section can be raised hydraulically to facilitate driving onto the gooseneck Axles and Tires: - BPW axles and suspension, first and second axles rigid, third axle steered - Third axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - Plug-in steel front wall, approx. 400 mm high - Yellow-red air couplings at the front connector strip - 3 kW electro-hydraulic unit for controlling hydraulic functions (except hydraulic winches) - Outer beams on the gooseneck with pre-drilled holes for bolt-on lashing rings - First hole approx. 200 mm from the front, subsequent holes every 400 mm - 2 pairs of screw-in lashing rings included - Mounting hole in the upper rear section of the gooseneck’s outer beams for a bolt-on lashing ring - Grating with 5 mm plate reinforcement on the gooseneck and the rear chamfer - 2" king pin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) - On the gooseneck, 1 pair of detachable ALU side walls, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control Bedpfxoyw R Srs Ah Sswl - Steel cable approx. 24 m long, cable Ø approx. 9.5 mm, with cable pressure roller - Winch mounted at the front on the inside of the gooseneck - Plastic tarpaulin cover for the winch - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B - static test load = 50,000 kg - Continuous grating with 5 mm steel plate substrate as additional reinforcement, designed for point loads: - on the lift bed - on the platform - on the hydraulically lowerable rear section - Painted-on anti-slip sand coating on the cover plates of the gooseneck and in transition areas (gooseneck to lift bed, lift bed to platform, platform to ramps) - 1 spare wheel with mounting adapter under the platform to the right, in front of the axles - Hydraulic lift bed, approx. 2,500 mm long, max. load in raised position during transit: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cutouts in the outer frame of the platform and lift bed for attaching tension belts - Extensive lashing positions - Hydraulically lowerable rear section for loading/unloading, as well as raisable to shorten total vehicle length - Load capacity during transit in horizontal position: 10,000 kg - Reduction in overall train length when raised: 2,350 mm - Painted-on anti-slip sand coating on the complete ramp, except for the extendable galvanized segment - Hydraulically extendable rear ramp extensions for loading/unloading - Radio remote control: - Operation of hydraulic lift bed - Operation of hydraulic system for ramp extension - Operation of hydraulic extension of rear ramp - 1st axle with traction aid - Central lubrication system with 1 pump - 4 extendable warning panels, approx. 423 x 423 mm each

Koşul: mükemmel (kullanılmış), ilk tescil: 07/2021, yükleme alanı uzunluğu: 134.500 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 770 mm, toplam uzunluk: 13.450 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 770 mm, Üretim yılı: 2021, Donanım: ABS, = Diğer seçenekler ve donanım = - Havalı süspansiyon = Ek bilgiler = Bjdpfx Ahoyxrdxs Sowl Boş ağırlık: 8.520 kg Yük kapasitesi: 31.000 kg Azami toplam ağırlık: 50.900 kg Yükleme platformu yüksekliği: 77 cm Teknik durumu: çok iyi Görsel durumu: çok iyi Fiyat: Talep üzerine

Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red Bodpfoyvnfgjx Ah Sswl * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Koşul: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear Bwjdpfew Tgp Djx Ah Sol * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle

Koşul: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) Bjdpfewcmhaox Ah Sswl - Wireless remote control for the remote steering

Koşul: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating Bsdpfxjhlz R Sj Ah Sewl - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Koşul: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Bodpeh Hm Tzjfx Ah Sjwl Low bed: - Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks - Ramps can be placed over or between the hooks - Mounting points for steel loading ramps at the rear between the external beams of the gooseneck - One locking position approximately every 1,000 mm on the extension - 1 lashing ring each left and right on the front cross member - Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile - 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings - 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards - 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings - Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering from front and rear, operable via cable remote control, with single-track control of axles - 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches - Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Loose widening boards, framed in steel - 4 warning panels approx. 423 x 423 mm - Radio remote control for remote steering operation - 3.5" kingpin - Anti-slip stickers on the left bevel of the gooseneck - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning panels when not in use - 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm - Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear - Trailer colour MB 7350 Novagrau

Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Bjdpfx Aheh Hm Ths Sjwl Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Koşul: yeni, boş ağırlık: 9.500 kg, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, işletme ağırlığı: 9.500 kg, Donanım: ABS, Loading platform in extendable design: Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8° 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of folding external lashing rings (LC 5,000 daN) 2 pairs of folding external lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality single-color 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic effect paint possible Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tires: BPW axles, air suspension, disc brakes (377 mm), with lift/lower function The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually Axle tools Tires 435/50 R 19.5 Accessories included: At the front galvanized connection rail, yellow-red air couplings 4 wheel chocks with holders 2" king pin Galvanized steel front wall, approx. 1600 mm high, EN12642-XL White reflective tape to EU standards on the sides, on the extension, and red at the rear Loading area with heavy-duty hardwood flooring 9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right side of direction of travel Galvanized drop-down supports under the loading platform chamfer Bedok Eammepfx Ah Sewl Sliding hook-in strips for ALU loading ramps at the rear of the vehicle European reflective signs (red-yellow) at the rear of the trailer A mudflap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket 1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel 4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes Lift axle on the front axle with control via TEBS E depending on current axle load and load status Speed stickers 80 km/h at the rear and on both sides Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon Load gauge for determining axle loads including load chart HRM metallization (High Resistance Metallisation) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallised

Koşul: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 35.400 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 940 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Loading platform: - Loading platform with extendable design - Loading platform with hardwood planks, approx. 500 mm x 8° rear chamfer - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension straps Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) topcoat, single-color in Novagrau (Nova grey) - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not available Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 1x 15-pin Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), with lift/lower function - Hydro-mechanically forced steering - Axle tool kit - Twin tires 235/75 R 17.5 Included accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holders - 2" king pin - Galvanized steel front wall approx. 1600 mm high - White reflective tape as per EU regulations on sides, extension, and rear in red - Loading platform with heavy-duty hardwood floor Bjdpfx Ahol Ux Rws Sewl - Steering from front and rear via cable - Remote control via push buttons with single-track axle monitoring - Radio remote control for auxiliary steering - 9 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform - Galvanized folding supports under the loading platform chamfer - Sliding hook-in rail for ALU ramps at the rear of the vehicle - European reflective signs (red-yellow) at the rear of the trailer - One mudflap at the rear of the trailer - One bracket for a rotating beacon at the rear of the trailer - On the gooseneck and on the left/right rear panel each: one holder for warning signs including socket - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (direction of travel) - BEKAMAX (Pico) central lubrication system with standard grease NLHI-2 and removable guard for the pump - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft container, or 1x 40ft container, with additional locking point in the extension for a 45ft container - 4 pairs of cross-mounted stake pocket rails in the loading platform, for plug-in stanchions 100 x 50 mm - Lift axle at the front axle with TEBS-controlled adjustment, depending on current axle load and loading status - Speed stickers 80 km/h at rear and both sides - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Holder for rotating beacon on warning signs - Load pressure gauge for axle load determination, including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then defined visible areas hot-finished metallized with ZINACOR 850 (Zinc 85% - Alu 15%)

Koşul: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor Bjdpfsrq Dlfox Ah Sewl - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Koşul: yeni, azami yük ağırlığı: 74.600 kg, toplam ağırlık: 98.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, with hydraulic suspension, MPA axles 12 t, hydromechanical forced steering, double telescoping platform-type loading area Unladen weight: 23,400 kg Payload: 74,600 kg Length: 14,650 mm to 31,000 mm STZ-L gooseneck - Hydraulic lifting/lowering function, stroke +295 mm / -295 mm - Front corners chamfered 45° (468 x 468 mm), closed outer frame - Robust steel welded construction - Formed loading platform 3,750 x 2,480 mm - Hydromechanical forced steering (dual circuit) in flat design (construction height 235 mm) with adjustable guide elements - Fifth wheel turntable with interchangeable 3.5" king pin and adjustable steering wedge - Fifth wheel load 26,000 kg - Turning radius 2,800 mm - Comfort stowage box Bwjdpfxjwcy Sro Ah Sol Loading platform - Platform design, double telescoping - Traffideck polymer rubber covering - Loading platform single telescoping, built with outer and inner tube construction - Locking of extension stages via spring-actuated cylinders and locating bolts - Fixed support at the front, 700 mm long Chassis - Hydraulically suspended 6-axle chassis, MPA MacPherson axle technology, wheelbase 1,510 mm - Axle aggregate BPW make, consisting of one fixed axle and six hydromechanically forced-steered axles with a maximum steering angle of 60° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Ride height 885 mm, +250 mm / -100 mm - Chassis with open outer frame Rear of vehicle - Design: chamfered 500 mm - Two integrated mechanical supports for stabilizing the rear during loading Brake system - Two-line, all-wheel air brake system with diaphragm brake cylinders - Automatically load-dependent braking (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring actuators - ABS brake - Hydraulic connection - easyControl - Aluminium sideboards, 3 sides - Lifting capability on 2 axles - Central lubrication system "BEKA-MAX" - Power unit - Extendable wide load supports incl. insert boards, telescoping up to 3,390 mm Technical data Gooseneck Loading area (LxW): 3,750 x 2,480 mm Construction height above fifth wheel: 235 mm Fifth wheel height (loaded): 1,250 mm Turning radius rear: 2,800 mm Turning radius front: 1,280 mm King pin: 3.5" Loading area Loading platform (LxW): 11,300 x 2,750 mm Extendable by 8,250 mm + 8,100 mm In stages up to (LxW): 27,650 x 2,750 mm Including rear chamfer: 500 mm Loading height (loaded): approx. 885 mm Chassis Wheelbase: 5 x 1,510 mm Rear overhang: 1,100 mm Steering 1st to 6th axle hydromechanically forced steered (dual-circuit steering)

Koşul: ikinci el, makine/araç numarası: YAFTL312000012613, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2012, = Additional options and accessories = Bedpfx Aex U D Alsh Sewl - Drum brakes = Notes = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 900 cm Loading platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further information = Axle configuration Tyre size: 245/70 R17.5 Axle make: SAF Brakes: drum brakes Suspension: air suspension Front axle: twin tyres; left inner tread depth: 40%; right inner tread depth: 25% Center axle: twin tyres; left inner tread depth: 50%; right inner tread depth: 40% Rear axle: twin tyres; left inner tread depth: 15%; right inner tread depth: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: YAFTL4005F0017017, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2015, toplam uzunluk: 13.900 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2015, = Additional Options and Accessories = - Drum brakes = Notes = Chassis Kingpin / fifth wheel diameter: 2 inches Kingpin / drawbar height: 120 cm Drum brake: ✓ Structure Year of manufacture: 2015 Special transport Hydraulic ramps: ✓ Bsdpfx Asxyffpjh Sjwl Length over axles: 880 cm Load floor length: 880 cm (extends to 660 cm) Gooseneck length: 420 cm Low loader: ✓ Maximum width: 3 cm (275 cm) Maximum length: 1540 cm (880 + 660 cm) Extendable: ✓ Telescopic: ✓ = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; left inner tread: 45%; right inner tread: 60% Middle axle 1: Twin tyres; left inner tread: 20%; right inner tread: 30% Middle axle 2: Twin tyres; steered; left inner tread: 55%; right inner tread: 40% Rear axle: Twin tyres; steered; left inner tread: 40%; right inner tread: 50% Weights Unladen weight: 11,750 kg Payload: 61.0 kg gross vehicle weight (GVW): 73,000 kg Functional Body manufacturer: Faymonville F-S44-1ALN Loading height: 85 cm = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: YAMT14XX5K0104637, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2020, toplam uzunluk: 14.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2020, Chassis Chassis height: 90 cm King pin / fifth wheel diameter: 2 inch Structure Turntable height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Axle length: 90 cm Load floor length: 930 cm Ramp length: 405 cm Gooseneck length: 430 cm Maximum width: 305 cm (20 cm + 20 cm) Maximum length: 930 cm Extendable: ✓ Bedpfx Ahsu H D Tao Sswl Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: Saf Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; lift axle; left outer tyre tread: 15%; right outer tyre tread: 80% Axle 2: Twin tyres; left outer tyre tread: 60%; right outer tyre tread: 50% Axle 3: Twin tyres; steered; left outer tyre tread: 70%; right outer tyre tread: 70% Axle 4: Twin tyres; steered; left outer tyre tread: 75%; right outer tyre tread: 65% Weights Unladen weight: 11,480 kg Payload: 49,320 kg Gross vehicle weight: 60,800 kg Functional Body brand: Faymonville Loading platform height: 90 cm Identification Registration number: C525073 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specifications available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform, extendable design: * Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over axles Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve * Axle tools included Tyres: * Tyres 245/70 R 17.5 3PMSF, load index (146/146 F) * Manufacturer at our discretion * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface per ISO 11992 * For correct display, the tractor unit must support transmitting and displaying these data Landing legs: * JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Paintwork: * Complete steel structure shot-blasted automatically after welding * Second blasting using corundum for optimum coating adhesion * Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Coating tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Steel structure: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Bwjdpfxexbmpfs Ah Sel Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on front galvanized connection strip * Electro-hydraulic unit * Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit) * Galvanized folding supports under the rear chamfer of the platform * 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN) * Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30?) or

Koşul: yeni, azami yük ağırlığı: 39.670 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Summary of equipment. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck at the rear, straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) * 1 pair of lying lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, diamond plate over the axles Landing Legs: JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed and two self-steering axles * Air suspension with lifting/lowering function * Self-steering axles with electromagnetic reversing lock, can be activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the tractor via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Brake System: * Brake system in compliance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel Construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Secondary blast treatment with corundum for optimal coating adhesion * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final paint finish with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL 841GL * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) * Metallic paints not possible * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical System: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicators Bwsdpfx Aexarlvoh Ssl * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets; connections according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanised front connection rail * Galvanised drop supports under the ramped section of the loading area * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * Removable ALU side boards and rear gate approx. 2,440 x 400 mm (L x H) on the gooseneck * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support block with 1 pair of WADER container pockets; fifth wheel load approx. 20,000 kg * 7 pairs of WADER container pockets for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container above the gooseneck, 2x 20' container * 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area * One galvanised crosswise holder under...

Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout via reverse gear and manual activation * Air suspension with lift and lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS Tyre Pressure Monitoring System according to ECE R 141 Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey Incl. the following additional features: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high Bwedpfx Aheyhkq Ue Ssl * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic unit at the rear, under the loading platform * On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated into the chamfered gooseneck * 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional hook-on intermediate table, ap

Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) Bjdpfxjyhkrrj Ah Sjwl * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Bedpfoyhkqzox Ah Sjwl Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Koşul: yeni, boş ağırlık: 9.450 kg, azami yük ağırlığı: 35.550 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 1.560 mm, toplam genişlik: 2.550 mm, lastik boyutu: 385/65 R 22,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate surface - Front bevel approx. 45° - Hydraulic lifting rocker, lifting and lowering range approx. -280/+250 mm - Two kingpin positions at 2,300 and 2,000 mm - For tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, approx. 9,500 mm long, with angle profiles underneath for pallet accommodation (distance kingpin to axle centre approx. 8,000 mm) Axles, Suspension, and Tyres: - BPW stub axles, with drum brakes, independent wheel suspension, hydraulic axle equalisation with lift and lower function - Lowering lock on axles in case of suspension airbag rupture, designed for max. pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors mounted on all wheels including spare wheels - TPMS system in accordance with ECE R 141 Surface Treatment: - Complete steel structure automatically shot-blasted with blast wheel unit after welding - Second blasting with corundum for optimal coating adhesion - HRM metallisation of entire chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimum corrosion protection - Final coating: 2 coats of 2K topcoat, single colour in Novagrau (DB 7350) - Paint structure tested in salt spray test according to ISO 9227-NSS, cavities sealed with special wax Standard Accessories: - Removable steel front wall, approx. 400 mm high - Tool box with lid recessed at rear of gooseneck, approx. 640 x 700 x 215 mm Bjdpfx Aoygvc Hjh Sewl - Plug-in ALU rear wall on gooseneck, approx. 400 mm high, anodised - One pair foldable ALU side walls on gooseneck, approx. 400 mm high, anodised - 2" kingpin - 3 pairs recessed lashing rings on gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings, lighting for operating gooseneck, suspension and hydraulic bracing with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Boarding ladder mounted on front right with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN) - On the longitudinal beams, grating inserts level with guide rails of cargo restraints - Hydraulic pre-installation incl. control unit for mounting 3 pairs of our hydraulic cargo restraints - First and last axle liftable manually left and right - Storage boxes behind the axle unit left and right, splash-proof - Rear taper for easier pallet insertion - Rear cross member with lugs for mechanical bracing - 7-pin socket at the rear cross member - Electro-hydraulic unit - 4 wheel chocks with holder - 2 axle load gauges mounted on the left incl. axle load chart - 3 pairs of hydraulic cargo restraints with swivel arms, slideable on longitudinal beams - Rear door with cross bracing, hinged left, hydraulically locked right, can be latched horizontally at 90°, 105°, and 270° - Fold-up underride guard for transporting up to 4 empty standard pallets - 1 spare wheel - Number plate with bracket incl. lighting, rear left on trailer - Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, for standard grease

Koşul: yeni, boş ağırlık: 6.350 kg, azami yük ağırlığı: 38.650 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Platform: - 2 pairs of external foldable lashing rings (LC 5,000 daN) - 24 pairs of cutouts in the platform’s outer frame for attaching tensioning straps (LC 2,000 daN) Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), with raise/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system according to EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not possible Steel Construction: - Steel construction made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting 24 Volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin - Wiring according to ISO norms: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings on the galvanized front terminal strip - 4 wheel chocks with holder - 2" king pin - A galvanized steel front wall approx. 1,600 mm high. EN12642-XL - White reflective tape according to EU regulations on the sides and red on the trailer’s rear - European reflective plates (red-yellow) at the rear of the trailer - Platform with approx. 30 mm thick hardwood floor, fitted in omega profiles - 10 pairs of stake pockets for 100 x 50 mm slot-in stakes in the platform’s outer frame Bsdoiu Etkspfx Ah Sjwl - 3 pairs of transverse stake pocket strips mounted on the platform for 100 x 50 mm slot-in stakes - Storage tray for 1,000 mm slot-in stakes at the rear in the central beam - 1 spare wheel carrier under the platform on the right side (direction of travel) - One mudflap at the rear of the trailer - Manual and documentation on USB stick - One bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear apron, brackets on both sides for warning signs including socket - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, flush with the rear - 80 km/h speed limit stickers at the rear and on both sides - Four warning signs extendable by approx. 400 mm, each approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible surfaces metalized and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Koşul: yeni, boş ağırlık: 8.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.080 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, renk: gri, Donanım: ABS, hidrolik arka platform, Loading Area: Loading area, extendable design with pneumatically operated locking mechanism Cut-outs in the outer frame of the loading area for securing straps to be hooked in Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and Tyres: BPW axles, air-suspended, with disc brakes (430 mm), equipped with raise/lower function Trailing steering axle with electro-magnetic reversing lock, activated via reverse gear or manually Axle tool kit Tyres: 385/65 R 22.5 Brake System: WABCO brake system compliant with EU regulations, with EBS-E Paintwork: Superior and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc-rich primer High-quality two-component top coat, single-tone in MB 7350 Novagrau tail section metallized and painted in RAL 9010 Metallic paint not possible Steel Construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical System: Electrical system according to EU regulations 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections according to ISO Accessories Included: Front galvanized connection strip with yellow-red air couplings Galvanized steel front bulkhead approx. 1,600 mm high, EN12642-XL 4 wheel chocks with brackets White reflective tape on the sides, on the extension, and rear red tape according to EU regulations European reflector plates at the rear of the trailer Approx. 30 mm thick hardwood floor, enclosed in omega profiles 10 pairs of stake pockets for 100 x 50 mm insert stakes in the outer frame 1 spare wheel carrier beneath the loading area, right side (in driving direction) Manual and operating instructions Bracket for rotating beacon at the rear of the trailer On the gooseneck and rear plate, left and right: bracket for warning signs including socket outlets Central chassis with painted sand coating as anti-slip protection 6 pairs of WADER container pockets in the loading area: for 1x 20ft container, 2x 20ft containers, or for 1x 40ft container in the extension, an additional locking point is provided for a 45ft container 4 pairs of crosswise stake pocket strips mounted in the loading area, for insert stakes 100 x 50 mm One galvanized crosswise bracket underneath the loading area, 2,390 x 720 x 400 mm Access ladder mounted on the right (in driving direction) Lifting axle on the front axle with TEBS E control, depending on the current axle load and current loading status Load gauge for determining axle loads, including load chart HRM metallization of the outer frame: Complete steel construction blasted, then defined visible areas metallized with ZINACOR 850 hot finish Bjdpjikyh Hsfx Ah Sswl

Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area: - Extendable cargo area design with pneumatically actuated locking - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the external frame of the cargo area for securing belts Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower) - Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually - Axle tools included - Tyres: 435/50 R 19.5 Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Paintwork: - First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K) - High-quality single-tone two-component topcoat (2K) in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Bwsdpfxei Dwlws Ah Ssl Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings on the galvanized front connection panel - 2 wheel chocks with brackets - 2" king pin - Galvanized steel front wall approx. 1,600 mm high - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Cargo floor made of approx. 38 mm thick hardwood - 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area - 1 spare wheel holder under the cargo area on the right in driving direction - Manual and documentation on USB stick - 1 mud flap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket - 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm) - 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container - 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes - 60 km/h speed sticker at the rear - 2 reversing lights mounted on the rear panel - Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light - Mounting bracket for beacon on the warning signs - HRM metalization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying